Dockbarx problem in XFCE4
Hello!
I'm trying to install dockbarx with yaourt from the AUR. However, I'm having a problem... When trying to install I get this error message:
/tmp/alpm_GYIvxX/.INSTALL: line 4: You may need to rebuild python-keybinder against python2 2.7: command not found
error: command failed to execute correctly
When I try to run it on my XFCE desktop with the xfapplet, I get this error:
'DockBarX Applet' could not be loaded.
An internal error occurred and the applet could not be loaded.
And it doesn't load. I think it has to do with that Python upgrade I've been reading. Please help.
Nevermind... Did a pacman -Syu and was able to add dockbar.
Similar Messages
-
Hello, I'm not sure whether I'm posting in the correct section of the forums but anyway, here's the problem, after upgrading the system xfce started crashing randomly (It definitely crashes when I try to suspend first time, then it does it correctly). I took a look in Xorg and fglrx log files, they didn't contain any errors. However, dmesg listed a segfault of xfce4-session in libglib, is there any solution for that problem or I just have to wait until the upgrade. Also, I have and AMD E-450 APU, and a proprietary catalyst driver from catalyst-stable. Here is the output from dmesg (the segfault message is in the end):
[ 0.000000] PM: Registered nosave memory: 00000000afb64000 - 00000000afb6c000
[ 0.000000] PM: Registered nosave memory: 00000000afb6c000 - 00000000afb91000
[ 0.000000] PM: Registered nosave memory: 00000000afb91000 - 00000000afbd4000
[ 0.000000] PM: Registered nosave memory: 00000000afd47000 - 00000000afef7000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84544 r8192 d21952 u1048576
[ 0.000000] pcpu-alloc: s84544 r8192 d21952 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 966665
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lqx root=UUID=ee58701b-54f4-4a5e-a884-636f3ac8cb2f ro nomodeset usbcore.autosuspend=1 quiet usbcore.autosuspend=0 nomodeset nmi_watchdog=0 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3782720k/5242880k available (4438k kernel code, 1314812k absent, 145348k reserved, 2809k data, 640k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 1646.401 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.80 BogoMIPS (lpj=1646401)
[ 0.000010] pid_max: default: 32768 minimum: 301
[ 0.000063] Security Framework initialized
[ 0.000068] SELinux: Disabled at boot.
[ 0.000071] AppArmor: AppArmor disabled by boot time parameter
[ 0.000073] Yama: becoming mindful.
[ 0.000095] Mount-cache hash table entries: 256
[ 0.000418] tseg: 00aff00000
[ 0.000422] CPU: Physical Processor ID: 0
[ 0.000424] CPU: Processor Core ID: 0
[ 0.000426] mce: CPU supports 6 MCE banks
[ 0.000442] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
[ 0.000558] Freeing SMP alternatives: 16k freed
[ 0.002455] ACPI: Core revision 20121018
[ 0.015032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025024] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.126038] Performance Events: AMD PMU driver.
[ 0.126044] ... version: 0
[ 0.126047] ... bit width: 48
[ 0.126048] ... generic registers: 4
[ 0.126050] ... value mask: 0000ffffffffffff
[ 0.126051] ... max period: 00007fffffffffff
[ 0.126053] ... fixed-purpose events: 0
[ 0.126054] ... event mask: 000000000000000f
[ 0.134178] smpboot: Booting Node 0, Processors #1 OK
[ 0.147430] Brought up 2 CPUs
[ 0.147435] smpboot: Total of 2 processors activated (6585.60 BogoMIPS)
[ 0.148250] devtmpfs: initialized
[ 0.148666] PM: Registering ACPI NVS region [mem 0xafaf7000-0xafb3efff] (294912 bytes)
[ 0.148681] PM: Registering ACPI NVS region [mem 0xafb49000-0xafb4bfff] (12288 bytes)
[ 0.148683] PM: Registering ACPI NVS region [mem 0xafb4d000-0xafb4dfff] (4096 bytes)
[ 0.148686] PM: Registering ACPI NVS region [mem 0xafb64000-0xafb6bfff] (32768 bytes)
[ 0.148689] PM: Registering ACPI NVS region [mem 0xafb91000-0xafbd3fff] (274432 bytes)
[ 0.149151] regulator-dummy: no parameters
[ 0.149293] NET: Registered protocol family 16
[ 0.150271] ACPI: bus type pci registered
[ 0.150593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150599] PCI: not using MMCONFIG
[ 0.150601] PCI: Using configuration type 1 for base access
[ 0.150602] PCI: Using configuration type 1 for extended access
[ 0.155916] bio: create slab <bio-0> at 0
[ 0.156315] ACPI: Added _OSI(Module Device)
[ 0.156319] ACPI: Added _OSI(Processor Device)
[ 0.156321] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156323] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.158103] ACPI: EC: Look up EC in DSDT
[ 0.160056] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.172510] ACPI: Interpreter enabled
[ 0.172527] ACPI: (supports S0 S3 S4 S5)
[ 0.172576] ACPI: Using IOAPIC for interrupt routing
[ 0.172886] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172961] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.213033] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.213391] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.245487] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.245850] ACPI: No dock devices found.
[ 0.245858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.246887] PCI host bridge to bus 0000:00
[ 0.246895] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.246899] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.246906] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.246910] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.246913] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.246916] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.246919] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.246923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.246938] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.246999] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[ 0.247013] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.247023] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.247032] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.247093] pci 0000:00:01.0: supports D1 D2
[ 0.247118] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.247130] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.247202] pci 0000:00:01.1: supports D1 D2
[ 0.247388] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.247482] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.247576] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.247602] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.247615] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.247629] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.247642] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.247655] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.247669] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d3ff]
[ 0.247749] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.247767] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.247863] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.247889] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.247997] pci 0000:00:12.2: supports D1 D2
[ 0.248000] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.248033] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.248052] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.248150] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.248175] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[ 0.248289] pci 0000:00:13.2: supports D1 D2
[ 0.248292] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.248325] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.248433] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.248461] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.248548] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.248571] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.248673] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.248732] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.248750] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
[ 0.248848] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.248953] pci 0000:00:15.0: supports D1 D2
[ 0.248991] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.249095] pci 0000:00:15.1: supports D1 D2
[ 0.249133] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.249237] pci 0000:00:15.2: supports D1 D2
[ 0.249282] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.249387] pci 0000:00:15.3: supports D1 D2
[ 0.249426] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.249474] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.249518] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.249564] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.249621] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.249665] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.249711] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.249755] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.249928] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.250055] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.250067] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.250070] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.250074] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.250077] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250080] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.250086] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.250216] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[ 0.250259] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.250422] pci 0000:03:00.0: supports D1 D2
[ 0.250425] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.252383] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.252400] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.252481] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.252587] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.252610] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.252649] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.252674] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.252777] pci 0000:05:00.0: supports D1 D2
[ 0.252780] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254339] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.254353] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.254369] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.254451] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.254501] pci_bus 0000:00: on NUMA node 0
[ 0.254602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.254674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.254726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[ 0.254777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
[ 0.254856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.254913] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.254916] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.259554] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.259704] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.259814] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.259920] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.260007] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.260075] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.260142] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.260210] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.260719] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260732] vgaarb: loaded
[ 0.260733] vgaarb: bridge control possible 0000:00:01.0
[ 0.261239] ACPI: bus type usb registered
[ 0.261372] usbcore: registered new interface driver usbfs
[ 0.261438] usbcore: registered new interface driver hub
[ 0.261565] usbcore: registered new device driver usb
[ 0.262092] PCI: Using ACPI for IRQ routing
[ 0.273018] PCI: pci_cache_line_size set to 64 bytes
[ 0.273142] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.273146] e820: reserve RAM buffer [mem 0xafaf7000-0xafffffff]
[ 0.273149] e820: reserve RAM buffer [mem 0xafb54000-0xafffffff]
[ 0.273151] e820: reserve RAM buffer [mem 0xafd47000-0xafffffff]
[ 0.273154] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.273543] NetLabel: Initializing
[ 0.273546] NetLabel: domain hash size = 128
[ 0.273547] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273565] NetLabel: unlabeled traffic allowed by default
[ 0.273680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.273687] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.275723] Switching to clocksource hpet
[ 0.281493] pnp: PnP ACPI init
[ 0.281511] ACPI: bus type pnp registered
[ 0.281854] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.281861] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.282965] system 00:01: [io 0x040b] has been reserved
[ 0.282969] system 00:01: [io 0x04d6] has been reserved
[ 0.282972] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.282979] system 00:01: [io 0x0c14] has been reserved
[ 0.282984] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.282987] system 00:01: [io 0x0c52] has been reserved
[ 0.282990] system 00:01: [io 0x0c6c] has been reserved
[ 0.282994] system 00:01: [io 0x0c6f] has been reserved
[ 0.282997] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.283000] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.283004] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.283007] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.283010] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.283014] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.283017] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.283020] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.283024] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.283027] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.283033] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283037] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283041] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.283045] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.283049] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.283054] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.283057] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.283062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283085] pnp 00:02: [dma 4]
[ 0.283236] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.283356] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.283484] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.283686] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.283691] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283937] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.284106] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284264] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.284487] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.285108] system 00:0a: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.285113] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.297811] pnp: PnP ACPI: found 12 devices
[ 0.297813] ACPI: ACPI bus type pnp unregistered
[ 0.303106] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.303114] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.303119] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.303173] pci 0000:00:15.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.303178] pci 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.303192] pci 0000:00:15.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.303196] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.303200] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.303213] pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
[ 0.303226] pci 0000:00:15.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.303230] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.303234] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[ 0.303253] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303257] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303261] pci 0000:00:15.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303264] pci 0000:00:15.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303268] pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303271] pci 0000:00:15.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.303275] pci 0000:00:15.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303278] pci 0000:00:15.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303281] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303285] pci 0000:00:15.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303288] pci 0000:00:15.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303291] pci 0000:00:15.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303300] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.303305] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303310] pci 0000:00:15.0: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303315] pci 0000:00:15.1: BAR 14: assigned [mem 0xd0700000-0xd08fffff]
[ 0.303320] pci 0000:00:15.1: BAR 15: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303324] pci 0000:00:15.2: BAR 14: assigned [mem 0xd0b00000-0xd0efffff]
[ 0.303328] pci 0000:00:15.3: BAR 14: assigned [mem 0xd0f00000-0xd10fffff]
[ 0.303332] pci 0000:00:15.3: BAR 15: assigned [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303339] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.303345] pci 0000:00:15.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.303349] pci 0000:00:15.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.303354] pci 0000:00:15.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.303361] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.303367] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.303373] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.303378] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303385] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.303470] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.303474] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.303481] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.303487] pci 0000:00:15.0: bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303495] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.303499] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
[ 0.303506] pci 0000:00:15.1: bridge window [mem 0xd0700000-0xd08fffff]
[ 0.303512] pci 0000:00:15.1: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303521] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.303525] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.303532] pci 0000:00:15.2: bridge window [mem 0xd0b00000-0xd0efffff]
[ 0.303537] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303545] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.303549] pci 0000:00:15.3: bridge window [io 0x4000-0x4fff]
[ 0.303557] pci 0000:00:15.3: bridge window [mem 0xd0f00000-0xd10fffff]
[ 0.303562] pci 0000:00:15.3: bridge window [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303627] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.303631] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.303634] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.303637] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.303640] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303643] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303647] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303650] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.303653] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.303656] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303660] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.303663] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.303666] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.303669] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.303672] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303675] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303678] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303681] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.303684] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.303687] pci_bus 0000:03: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303691] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.303693] pci_bus 0000:04: resource 1 [mem 0xd0700000-0xd08fffff]
[ 0.303752] pci_bus 0000:04: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303755] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.303758] pci_bus 0000:05: resource 1 [mem 0xd0b00000-0xd0efffff]
[ 0.303761] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303765] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.303768] pci_bus 0000:06: resource 1 [mem 0xd0f00000-0xd10fffff]
[ 0.303771] pci_bus 0000:06: resource 2 [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303836] NET: Registered protocol family 2
[ 0.304049] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304316] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304574] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.304683] TCP: reno registered
[ 0.304693] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304845] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.305013] NET: Registered protocol family 1
[ 0.305042] pci 0000:00:01.0: Boot video device
[ 0.305384] PCI: CLS 64 bytes, default 64
[ 0.305471] Unpacking initramfs...
[ 0.400016] Freeing initrd memory: 2664k freed
[ 0.401721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.401733] software IO TLB [mem 0xabaf7000-0xafaf7000] (64MB) mapped at [ffff8800abaf7000-ffff8800afaf6fff]
[ 0.401984] LVT offset 0 assigned for vector 0x400
[ 0.402067] perf: AMD IBS detected (0x000000ff)
[ 0.402950] audit: initializing netlink socket (disabled)
[ 0.402971] type=2000 audit(1367137456.294:1): initialized
[ 0.403912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.410965] VFS: Disk quotas dquot_6.5.2
[ 0.411207] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.411535] msgmni has been set to 7393
[ 0.412281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.412285] io scheduler noop registered
[ 0.412287] io scheduler deadline registered
[ 0.412295] io scheduler cfq registered
[ 0.412435] io scheduler bfq registered (default)
[ 0.413822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.415487] Linux agpgart interface v0.103
[ 0.415820] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.415822] vesafb: scrolling: redraw
[ 0.415826] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.416298] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
[ 0.477778] Console: switching to colour frame buffer device 128x48
[ 0.530645] fb0: VESA VGA frame buffer device
[ 0.530917] ACPI: acpi_idle registered with cpuidle
[ 0.557297] GHES: HEST is not enabled!
[ 0.557305] XENFS: not registering filesystem on non-xen platform
[ 0.557737] libphy: Fixed MDIO Bus: probed
[ 0.557999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 0.561580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.561601] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.562037] mousedev: PS/2 mouse device common for all mice
[ 0.562175] cpuidle: using governor ladder
[ 0.562284] cpuidle: using governor menu
[ 0.562288] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.562699] TCP: vegas registered
[ 0.562701] TCP: yeah registered
[ 0.562786] Key type dns_resolver registered
[ 0.563728] registered taskstats version 1
[ 0.564483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.564936] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 0.566831] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.567786] Freeing unused kernel memory: 640k freed
[ 0.568164] CFS CPU scheduler.
[ 0.584465] systemd-udevd[507]: starting version 202
[ 0.653357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.655531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.655963] ehci-pci: EHCI PCI platform driver
[ 0.656097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.656109] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.656128] QUIRK: Enable AMD PLL fix
[ 0.656224] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
[ 0.657747] SCSI subsystem initialized
[ 0.661333] ACPI: bus type scsi registered
[ 0.665103] libata version 3.00 loaded.
[ 0.711249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.711257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.711260] usb usb1: Product: OHCI Host Controller
[ 0.711263] usb usb1: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.711266] usb usb1: SerialNumber: 0000:00:12.0
[ 0.711963] hub 1-0:1.0: USB hub found
[ 0.711978] hub 1-0:1.0: 5 ports detected
[ 0.712324] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.712335] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 0.712343] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.712361] ehci-pci 0000:00:12.2: debug port 1
[ 0.712428] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[ 0.718188] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.718242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.718249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.718255] usb usb2: Product: EHCI Host Controller
[ 0.718260] usb usb2: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.718264] usb usb2: SerialNumber: 0000:00:12.2
[ 0.718762] hub 2-0:1.0: USB hub found
[ 0.718770] hub 2-0:1.0: 5 ports detected
[ 0.719034] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.719043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.719061] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.719099] ehci-pci 0000:00:13.2: debug port 1
[ 0.719142] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb49000
[ 0.725166] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.725211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.725218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725224] usb usb3: Product: EHCI Host Controller
[ 0.725230] usb usb3: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.725235] usb usb3: SerialNumber: 0000:00:13.2
[ 0.725648] hub 3-0:1.0: USB hub found
[ 0.725656] hub 3-0:1.0: 5 ports detected
[ 0.725886] ahci 0000:00:11.0: version 3.0
[ 0.726156] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.726162] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.730354] scsi0 : ahci
[ 0.730816] scsi1 : ahci
[ 0.731197] scsi2 : ahci
[ 0.731481] scsi3 : ahci
[ 0.731816] scsi4 : ahci
[ 0.732139] scsi5 : ahci
[ 0.732460] ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
[ 0.732464] ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
[ 0.732468] ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
[ 0.732471] ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
[ 0.732475] ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
[ 0.732478] ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
[ 0.732661] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.732683] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.732720] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
[ 0.787137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787142] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787145] usb usb4: Product: OHCI Host Controller
[ 0.787148] usb usb4: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.787151] usb usb4: SerialNumber: 0000:00:13.0
[ 0.787659] hub 4-0:1.0: USB hub found
[ 0.787670] hub 4-0:1.0: 5 ports detected
[ 0.787909] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.787918] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 0.787944] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
[ 0.842042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.842046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.842049] usb usb5: Product: OHCI Host Controller
[ 0.842052] usb usb5: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.842054] usb usb5: SerialNumber: 0000:00:14.5
[ 0.842401] hub 5-0:1.0: USB hub found
[ 0.842410] hub 5-0:1.0: 2 ports detected
[ 1.036735] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.036809] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.037712] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.037754] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.037797] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.121601] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.191503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.197711] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[ 1.197719] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.203906] ata1.00: configured for UDMA/133
[ 1.204335] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
[ 1.212034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.212041] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.212125] sd 0:0:0:0: [sda] Write Protect is off
[ 1.212130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.212166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.239240] usb 2-5: New USB device found, idVendor=12d1, idProduct=1506
[ 1.239251] usb 2-5: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.239257] usb 2-5: Product: HUAWEI Mobile
[ 1.239263] usb 2-5: Manufacturer: Huawei Technologies
[ 1.239601] sda: sda1 sda2 sda3 sda4
[ 1.241058] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.248373] Initializing USB Mass Storage driver...
[ 1.248653] scsi6 : usb-storage 2-5:1.5
[ 1.249032] scsi7 : usb-storage 2-5:1.6
[ 1.250887] usbcore: registered new interface driver usb-storage
[ 1.250892] USB Mass Storage support registered.
[ 1.346272] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 1.402164] tsc: Refined TSC clocksource calibration: 1646.493 MHz
[ 1.402180] Switching to clocksource tsc
[ 1.463721] usb 3-4: New USB device found, idVendor=2232, idProduct=1020
[ 1.463730] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.463737] usb 3-4: Product: WebCam SC-0311139N
[ 1.463743] usb 3-4: Manufacturer: Image Processor
[ 1.463748] usb 3-4: SerialNumber: SM3711
[ 1.690741] usb 1-3: new full-speed USB device number 2 using ohci_hcd
[ 1.847612] usb 1-3: New USB device found, idVendor=0a5c, idProduct=219c
[ 1.847624] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.847631] usb 1-3: Product: Broadcom BCM2070 Bluetooth Device
[ 1.847637] usb 1-3: Manufacturer: Broadcom Corp
[ 1.847642] usb 1-3: SerialNumber: 30144A229E4B
[ 2.058659] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.250157] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 2.250876] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 2.302154] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2.827197] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.065305] systemd[1]: Inserted module 'autofs4'
[ 3.083044] systemd[1]: Set hostname to <REM>.
[ 3.104478] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[ 3.673989] systemd[1]: logged here: 'Support for option SysVStartPriority= has been disabled at compile time and is ignored': 0
[ 3.928323] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.928445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.928473] systemd[1]: Starting Remote File Systems.
[ 3.928499] systemd[1]: Reached target Remote File Systems.
[ 3.928520] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.928571] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.928589] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.928636] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.928654] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.928708] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.928727] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.928777] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.928798] systemd[1]: Starting Encrypted Volumes.
[ 3.928818] systemd[1]: Reached target Encrypted Volumes.
[ 3.928949] systemd[1]: Starting udev Kernel Socket.
[ 3.928994] systemd[1]: Listening on udev Kernel Socket.
[ 3.929083] systemd[1]: Starting udev Control Socket.
[ 3.929127] systemd[1]: Listening on udev Control Socket.
[ 3.929179] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.929401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.929433] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.929511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.929537] systemd[1]: Starting Journal Socket.
[ 3.929627] systemd[1]: Listening on Journal Socket.
[ 3.929668] systemd[1]: Mounting Debug File System...
[ 3.941501] systemd[1]: Starting Setup Virtual Console...
[ 3.948777] systemd[1]: Starting udev Coldplug all Devices...
[ 4.302692] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.302896] systemd[1]: Starting Create static device nodes in /dev...
[ 4.311080] systemd[1]: Mounting Huge Pages File System...
[ 4.333926] systemd[1]: Starting Apply Kernel Variables...
[ 4.344029] systemd[1]: Starting Journal Service...
[ 4.354053] systemd[1]: Started Journal Service.
[ 4.354159] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.398484] systemd[1]: Starting Load Kernel Modules...
[ 4.405897] systemd[1]: Expecting device dev-sda2.device...
[ 4.405958] systemd[1]: Started File System Check on Root Device.
[ 4.405985] systemd[1]: Mounting Temporary Directory...
[ 4.444783] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.141813] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15
[ 5.523573] vboxdrv: Found 2 processor cores.
[ 5.523876] vboxdrv: fAsync=0 offMin=0x37b offMax=0x21cc
[ 5.524228] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.524230] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 5.585084] systemd-udevd[1417]: starting version 202
[ 6.551072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.551149] ACPI: Lid Switch [LID]
[ 6.551279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.551286] ACPI: Power Button [PWRB]
[ 6.551432] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.551436] ACPI: Sleep Button [SLPB]
[ 6.551556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.551560] ACPI: Power Button [PWRF]
[ 6.557442] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.570168] ACPI: AC Adapter [ADP1] (on-line)
[ 6.576119] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.581379] acpi device:31: registered as cooling_device2
[ 6.581414] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 6.581535] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 6.685232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.685246] ACPI: Battery Slot [BAT1] (battery present)
[ 6.830273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.830383] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 7.576782] [drm] Initialized drm 1.1.0 20060810
[ 7.618495] [drm] VGACON disable radeon kernel modesetting.
[ 7.620005] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.620007] [drm] No driver support for vblank timestamp query.
[ 7.620012] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
[ 7.767784] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.767790] Disabling lock debugging due to kernel taint
[ 7.783921] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 7.784096] <6>[fglrx] vendor: 1002 device: 9806 count: 1
[ 7.784621] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 7.785024] <6>[fglrx] Kernel PAT support is enabled
[ 7.785057] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
[ 8.571990] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k
[ 10.299762] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.935682] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 10.950057] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x16, 0x0a.
[ 11.022649] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 11.032941] microcode: CPU0: patch_level=0x05000101
[ 14.667774] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.684494] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 14.684678] sp5100_tco: PCI Revision ID: 0x42
[ 14.684818] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 14.684869] sp5100_tco: Last reboot was not triggered by watchdog.
[ 14.685016] sp5100_tco: initialized (0xffffc9000003eb00). heartbeat=60 sec (nowayout=0)
[ 14.913699] systemd-logind[1501]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 14.914754] systemd-logind[1501]: Watching system buttons on /dev/input/event2 (Power Button)
[ 14.915967] systemd-logind[1501]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 14.916946] systemd-logind[1501]: Watching system buttons on /dev/input/event4 (Power Button)
[ 14.925385] systemd-logind[1501]: Watching system buttons on /dev/input/event5 (Video Bus)
[ 14.993314] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 14.993343] microcode: CPU1: patch_level=0x05000101
[ 14.994827] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.200573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 15.200964] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
[ 15.204405] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000034000, 50:b7:c3:02:d7:05, XID 0c900800 IRQ 40
[ 15.204413] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 15.290455] systemd-udevd[1420]: renamed network interface eth0 to enp5s0
[ 15.292678] systemd-sysctl[2033]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.404438] samsung_laptop: detected SABI interface: SwSmi@
[ 15.404444] samsung_laptop: Backlight controlled by ACPI video driver
[ 15.452716] fglrx_pci 0000:00:01.0: irq 41 for MSI/MSI-X
[ 15.453760] <6>[fglrx] Firegl kernel thread PID: 2044
[ 15.453957] <6>[fglrx] Firegl kernel thread PID: 2045
[ 15.454361] <6>[fglrx] Firegl kernel thread PID: 2046
[ 15.454513] <6>[fglrx] IRQ 41 Enabled
[ 15.459141] <6>[fglrx] Gart USWC size:1156 M.
[ 15.459145] <6>[fglrx] Gart cacheable size:458 M.
[ 15.459152] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 15.459154] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3a0000
[ 15.459157] <6>[fglrx] Reserved FB block: Unshared offset:fff4000, size:c000
[ 15.461998] systemd-sysctl[2047]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.698292] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 16.424442] kvm: Nested Virtualization enabled
[ 16.424448] kvm: Nested Paging enabled
[ 16.499708] cfg80211: Calling CRDA to update world regulatory domain
[ 16.716267] Bluetooth: Core ver 2.16
[ 16.718230] NET: Registered protocol family 31
[ 16.718232] Bluetooth: HCI device and connection manager initialized
[ 16.718245] Bluetooth: HCI socket layer initialized
[ 16.718249] Bluetooth: L2CAP socket layer initialized
[ 16.718259] Bluetooth: SCO socket layer initialized
[ 16.733212] media: Linux media interface: v0.10
[ 16.782160] lib80211: common routines for IEEE802.11 drivers
[ 16.782166] lib80211_crypt: registered algorithm 'NULL'
[ 16.784149] Linux video capture interface: v2.00
[ 16.815091] usbcore: registered new interface driver usbserial
[ 16.816124] usbcore: registered new interface driver usbserial_generic
[ 16.817094] usbserial: USB Serial support registered for generic
[ 16.906678] usbcore: registered new interface driver option
[ 16.909342] usbserial: USB Serial support registered for GSM modem (1-port)
[ 16.909431] option 2-5:1.0: GSM modem (1-port) converter detected
[ 16.912145] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
[ 16.912225] option 2-5:1.3: GSM modem (1-port) converter detected
[ 16.915130] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
[ 16.915190] option 2-5:1.4: GSM modem (1-port) converter detected
[ 16.921982] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB2
[ 16.986926] systemd-udevd[1427]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.5/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
[ 16.988089] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
[ 16.993277] systemd-udevd[1428]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.6/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory
[ 17.002663] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:13.2/usb3/3-4/3-4:1.0/input/input8
[ 17.011802] usbcore: registered new interface driver uvcvideo
[ 17.011808] USB Video Class driver (1.1.1)
[ 17.036157] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 17.055032] usbcore: registered new interface driver cdc_wdm
[ 17.076782] qmi_wwan 2-5:1.1: cdc-wdm0: USB WDM device
[ 17.085492] qmi_wwan 2-5:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:12.2-5, WWAN/QMI device, 02:50:f3:00:00:00
[ 17.088340] usbcore: registered new interface driver qmi_wwan
[ 17.173910] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 17.402599] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 17.546699] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 17.549997] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 17.554480] lib80211_crypt: registered algorithm 'TKIP'
[ 17.557087] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 17.587070] sr0: scsi-1 drive
[ 17.587077] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.590908] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 17.764781] systemd-udevd[1426]: renamed network interface wwan0 to wwp0s18f2u5i1
[ 17.767245] systemd-sysctl[2747]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.772802] systemd-udevd[1427]: renamed network interface eth0 to wlp3s0
[ 17.776265] systemd-sysctl[2756]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.780048] systemd-sysctl[2755]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.786438] systemd-sysctl[2759]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 18.086526] usbcore: registered new interface driver btusb
[ 18.769655] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590af8 (20121018/exresop-422)
[ 18.769669] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 18.769676] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 18.769691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 20.495319] vboxpci: IOMMU not found (not registered)
[ 22.447778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.447784] Bluetooth: BNEP filters: protocol multicast
[ 22.447799] Bluetooth: BNEP socket layer initialized
[ 22.595480] Bluetooth: RFCOMM TTY layer initialized
[ 22.595500] Bluetooth: RFCOMM socket layer initialized
[ 22.595502] Bluetooth: RFCOMM ver 1.11
[ 24.407804] r8169 0000:05:00.0 enp5s0: link down
[ 24.815261] NET: Registered protocol family 10
[ 24.815665] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 31.811205] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=0
[ 32.023742] WARNING! power/level is deprecated; use power/control instead
[ 162.594332] fuse init (API version 7.20)
[ 181.712247] xfce4-session[4386]: segfault at ffffffff00000000 ip 00007fe7c8be9537 sp 00007fffd9c3f2e0 error 5 in libglib-2.0.so.0.3600.1[7fe7c8b86000+fc000]
[ 183.784141] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 184.997887] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88013aae2948 (20121018/exresop-422)
[ 184.997901] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 184.997908] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 184.997923] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 405.815701] NET: Registered protocol family 17
[ 1429.517360] xfce4-session[5257]: segfault at ffffffff00000000 ip 00007f53c2ee6537 sp 00007fff6060c2d0 error 5 in libglib-2.0.so.0.3600.1[7f53c2e83000+fc000]
[ 1430.198201] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=600
[ 1431.620829] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600,commit=600
[ 1432.769216] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 1434.176644] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590360 (20121018/exresop-422)
[ 1434.176667] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 1434.176680] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1434.176709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1477.326788] usb 1-3: USB disconnect, device number 2
Any help appreciated.
Last edited by NinjaBus (2013-04-28 09:12:19)hadrons123 wrote:does it happen if you use the default arch kernel?
Yes, it keeps happening even with the default kernel when I try to shut down/suspend the computer (Alt-F4 key combination). I've read on some russian forum that it's the problem in recently upgraded glib2 (as they think), however downgrade didn't help. I'll try to check whether xfce4-session is to blame.
EDIT: It's definitely not xfce4-session, I tried previous version. Also, while running downgrade I saw that there is a newer version of glib2 in ARM, which is much more unstable, so I'm using 2.36.1-1.
Last edited by NinjaBus (2013-04-28 15:49:59) -
Problem running xfce4 with xdm
G'day,
I'm trying to get xdm happening but I'm having some problems.
After searching the forums I created a ~/.xsession file with the same content as my working ~.xinitrc and changed the runtime in inittab.
After rebooting login in xdm doesn't work. I just keep returning to the login screen.
Checking out my ~/.xsession-errors file, I have
/home/mctavish/.xsession: line 5: exec: startxfce4: not found
It works if I use the full path - but then of course falls down when startxfce4 tries to call xfwm4 and so on. So it looks like a path problem.
I know that the /opt/xfce4/bin path is setup in /etc/profile.d/xfce4.sh, which is called from /etc/profile.
Note too that I have never had any problems using startx to get xfce4 up and running.
So it seems to me that somehow /etc/profile is not being called (or whatever) when I use xdm. Is this crazy talk? In fact /etc/profile is not executable, so how it normally run and from where?
Of course I could just use gdm but the pain of having all those unnecessary gnomish packages on my system would be unbearable.Try this /etc/X11/xdm/Xresources
! $Xorg: Xresources,v 1.3 2000/08/17 19:54:17 cpqbld Exp $
! $XFree86: xc/programs/xdm/config/Xres.cpp,v 1.7 2003/11/15 03:25:22 dawes Exp $
xlogin*login.translations: #override
Ctrl<Key>R: abort-display()n
<Key>F1: set-session-argument(failsafe) finish-field()n
<Key>Delete: delete-character()n
<Key>Left: move-backward-character()n
<Key>Right: move-forward-character()n
<Key>Home: move-to-begining()n
<Key>End: move-to-end()n
Ctrl<Key>KP_Enter: set-session-argument(failsafe) finish-field()n
<Key>KP_Enter: set-session-argument() finish-field()n
Ctrl<Key>Return: set-session-argument(failsafe) finish-field()n
<Key>Return: set-session-argument() finish-field()
xlogin*greeting: Welcome to CLIENTHOST
xlogin*namePrompt: Login:
xlogin*fail: Login incorrect
#if WIDTH > 800
xlogin*greetFont: -adobe-helvetica-bold-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*font: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*promptFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*failFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
#else
xlogin*greetFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*font: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*promptFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
xlogin*failFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
#endif
#ifdef COLOR
xlogin*borderWidth: 1
xlogin*frameWidth: 1
xlogin*innerFramesWidth: 1
xlogin*shdColor: grey30
xlogin*hiColor: grey90
xlogin*background: #f5f5f5
xlogin*foreground: darkgreen
xlogin*greetColor: #6c83b0
xlogin*failColor: red
*Foreground: black
*Background: #fffff0
#else
xlogin*borderWidth: 1
xlogin*frameWidth: 0
xlogin*innerFramesWidth: 1
xlogin*shdColor: black
xlogin*hiColor: black
#endif
#if PLANES >= 8
xlogin*logoFileName: /usr/X11R6/lib/X11/xdm/pixmaps/archlinux.xpm
#endif
xlogin*useShape: true
xlogin*logoPadding: 10
XConsole.text.geometry: 480x130
XConsole.verbose: true
XConsole*iconic: true
XConsole*font: fixed
Chooser*geometry: 700x500+300+200
Chooser*allowShellResize: false
Chooser*viewport.forceBars: true
Chooser*label.font: *-new century schoolbook-bold-i-normal-*-240-*
Chooser*label.label: XDMCP Host Menu from CLIENTHOST
Chooser*list.font: -*-*-medium-r-normal-*-*-230-*-*-c-*-iso8859-1
Chooser*Command.font: *-new century schoolbook-bold-r-normal-*-180-*
Put this line into /etc/X11/xdm/Xsetup_0
/usr/X11R6/bin/xsetroot -solid "#000000"
And this into /etc/X11/xdm/pixmaps/ -
[SOLVED] few right-management related problems in XFce4
I'm new to XFce (just installed it yesterday...] and while the DE itself is amazing, I have a few problems...
1. I cannot delete shortcuts from desktop as a normal user.
[SOLVED] 2. I cannot mount external storage media as a normal user [and yes I have udev set up to mount them and pmount installed]. - solution: add dbus-launch to .xinitrc, even if you have dbus in rc.conf...
Any ideas on how to fix these?
Thanks,
Last edited by MatejLach (2011-10-11 17:42:39)Leonid.I wrote:
karol wrote:
MatejLach wrote:
Do you mean this?;
"dbus-launch should actually be called after ck-launch-session, otherwise there will be authorization problems when mounting disks as a regular user, see FS#25031. For a temporary workaround you can comment out the xinitrc.d script at the beginning of the file [...]?"
Yes.
Is the problem related to other hdd partitions or usb sticks?
dbus-launch will start automatically, if you have dbus in DAEMONS and "exec ck-launch-session startxfce4" in ~/.xinitrc. At least this works for me (no DM)...
I DO have 'dbus' in /etc/rc.conf, but it seems that I had to manually add dbus-launch to my user-specific .xinitrc file - not sure why... -
Greetings again,
I have this problem with XFCE4, from [extra] (look at the toolbar): http://xs313.xs.to/xs313/07136/toolbar.png
My xorg.conf is as follows:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
# EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "gb"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "S700"
Option "DPMS"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-69
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 59-85
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "prosavage"
Driver "savage"
BusID "PCI:1:0:0"
#VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "prosavage"
Monitor "S700"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Can anyone help me? Thank you.It was with all themes, the problem's fixed now. I had to add this line into my xorg.conf
load extmod
Under modules. Thanks though. -
Xfce4 file associations simple problem
Can anyone help me with some simple file association problems in xfce4?
whenever I click a link, it tries to launch the GNOME Web Browser, and I get the following message:
Could not start GNOME Web Browser
Startup failed because of the following error:
Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
I've set the preferred application to Opera in the Settings menu, but no difference.
Additionally, can anyone point to somewhere explaining how to write custom commands for opening files in thunar. For example, it doesn't recognise .torrent files, and I'd like to launch them in Azureus when I click on them.
Any help appreciated!soylent_green_is_hamster wrote:
run dbus-launch gnome web browser
this produces the following error
Couldn't exec web: No such file or directory
about the thunar question if u right click a .torrent file and open it with azureus theres a tick which is ticked by default to open these files every time with azureus.
yeah - but azureus isn't listed as one of the applications I can pick from. Not sure what to do...
errm ...
dbus-launch NAME_OF_BROWSER_EXECUTIVE
edit: u could always edit the menu or make a custom link adding the command for example dbus-launch FOO instead of just FOO
about azureus: add it manually using a custom command.. -
[SOLVED] Problem copying objects in Inkscape 0.48.0-4
I have problems when I copy any object when using inkscape. Even after removing the config directories and using a completely blank document.
I create a simple rect and press ctr+c (or use the context menu) and this error comes up:
El script inkex.py y, por lo tanto, esta extensión necesitan la envoltura lxml («lxml wrapper») para libxml2. Descargue
e instale la última versión de http://cheeseshop.python.org/pypi/lxml/ o mediante su gestor de paquetes con un
comando similar a este: sudo apt-get install python-lxml
It says "inkex.py", which comes with the package, needs python-lxml. So I install the package, close inkscape, remove the configuration directories and try again.
Now it throws this error message:
No matching node for expression: /svg:svg/@sodipodi:docname
Traceback (most recent call last):
File "gimp_xcf.py", line 185, in <module>
e.affect()
File "/usr/share/inkscape/extensions/inkex.py", line 215, in affect
self.effect()
File "gimp_xcf.py", line 43, in effect
docname = self.xpathSingle('/svg:svg/@sodipodi:docname')[:-4]
TypeError: 'NoneType' object is not subscriptable
The script "gimp_xcf.py" also comes with the package. No clue why it is calling it since I'm only trying to copy (not even paste) from a clean svg document.
I click accept and this error message comes up asking me to install uniconvertor:
You need to install the UniConvertor software.
For GNU/Linux: install the package python-uniconvertor.
For Windows: download it from
http://sk1project.org/modules.php?name=Products&product=uniconvertor
and install into your Inkscape's Python location
I install uniconvertor, delete the configuration directories and try again. The previous "gimp_xcf.py" error message comes up, I click accept again only to get another error dialog:
No layers found
I click accept again and now I can paste the object. But the "gimp_xcf.py" and "No layers found" dialogs keep coming up in a loop which can only be stopped by killing inkscape.
I doubt very much this is a upstream issue since I couldn't find it in inkscape's bug tracker (such obvious bug would have been reported already) I also cannot find any report in arch's bug tracker. So I'm unsure if I should report this, anyone else has this problem? All related packages are up to date.
Last edited by dresb (2011-02-07 16:21:08)I found I was having this problem running xfce4.8
There seems to be some talk about it here https://bugs.launchpad.net/inkscape/+bug/418242
It seems that clipboard managers may be causing the problem. I wasn't running xfce4-clipman but I found that killing xfce4-settings-helper fixed the problem for me.
Hope this helps. -
[SOLVED]Xfce4 not displaying any characters.
I got this weird problem with xfce4.
I have an old machine I want to use as a bittorrent client. For this I want to use xfce4 (with azureus).
So now that I've installed xfce4 none of the characters on the screen are shown correctly. They're all just squares?
Thinking I had a font problem, I started going through all my installed fonts, and even installing some extra fonts. None of it helped.
I'm not sure if it is related to the problem, but when I kill X.org there are some messages in the console. They look like this one:
Pango-WARNING **: pango_cairo_font_get_scaled_font called with bad font, expect ugly output.
I've also been trying different settings for the locale, thinking it might be a localization problem. That didn't help either.
Does anyone know what I'm doing wrong here?
If there are any config or log files you would like to see, just let me know.
EDIT:
Nevermind. It never stops to amaze me how incredibly stupid I can be.
Pango of course needs the sdl_pango package to function properly! Of course I was under the impression that all dependencies were handled automatically?
Have a nice New Years Eve everyone.
Last edited by madeye (2007-12-30 13:27:46)x33a wrote:Try a different font.
I know that this font works because I tried it in urxvt and it displayed correctly.
Also, I tried "override_utf8_locale yes" and it still was incorrect. -
Middle mouse button problem after arch update
Dear Arch Users,
I have a very strange problem in xfce4 with middle mouse button after arch linux update. It is especially annoying in firefox. Earlier, the middle button just opened a new tab (in firefox) now it also tryies to go back everywhere it can... So, when I am on a some site, I try to open some link by middle button click, it is opened in a new tab - OK, but the firefox goes also to the previos site on a current tab - it is terrible...
I am using xfce 4.8.0 and xorg 1.9.5 (RC1).
Cheers,
alamakot
Last edited by alamakot (2011-03-25 12:27:20)Thanks for the reply. It was by default set to true, but I have tried with false and the situation is the same... So, another hints please;-)
Cheers,
alamakot. -
[solved] xfce4-panel plugins keep crashing after update
I've been having problems with xfce4-panel after some recent updates. Several plugins for it, like the Action Buttons, CPU graph and Notification Area keep crashing right after being added to the panel. The error message isn't very helpful, just saying the plugin in question "unexpectedly left the panel". Any ideas on how to debug this?
Last edited by vox.cogitatio (2012-06-12 15:36:38)I found the problem. I was running the panel without the rest of xfce4. I thought this was doable, but apparently some applets assume you have the base packages of xfce4 installed, as the problems ceased when I installed them.
-
[Xfce4] Issue with creating new tab in terminal
So, when I create a new tab in terminal I got a black rectangle in the top left corner of my screen it dimensions is like terminal window itself.
I have this problem on Xfce4 and Lxde as well.
What info do you need to help me with this issue?
Thanks,
Igor.I noticed that problem with Xfce's terminal as well. I remember it also effecting firefox or other windows depending on how I moved things around.
I think I may have solved the issue by disabling Xfce's desktop effects, or something to that effect. I haven't seen the problem since I switched over to xmonad though. -
[SOLVED] Xfce 4.8, "no running instance of xfce4-panel has been found"
Hello fellow Archers!
I just upgraded my Xfce installation to version 4.8, but I have a weird problem with xfce4-panel. After upgrading the system via pacman I've rebooted, and after logging in I couldn't see the Xfce's panel anymore! Moreover, a dialog box pops up saying that "no running instance of xfce4-panel has been found". I've tried to fix this issue by launching xfce4-panel through a terminal, and then saving the session before logging out. Now when I log in, I can finally see the panel, but the pop up window keeps coming out every single time. Do you have any suggestions on what could be the issue?
Thanks in advance!
Last edited by Tudhalyas (2011-01-18 12:15:03)Behemot you'd better start a different thread. May be a different issue as this one is solved.
isn't it supposed to start from /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml ? Here's what's in mine:
<?xml version="1.0" encoding="UTF-8"?>
<channel name="xfce4-session" version="1.0">
<property name="general" type="empty">
<property name="FailsafeSessionName" type="string" value="Failsafe"/>
</property>
<property name="sessions" type="empty">
<property name="Failsafe" type="empty">
<property name="IsFailsafe" type="bool" value="true"/>
<property name="Count" type="int" value="5"/>
<property name="Client0_Command" type="array">
<value type="string" value="xfwm4"/>
</property>
<property name="Client0_PerScreen" type="bool" value="false"/>
<property name="Client1_Command" type="array">
<value type="string" value="xfce4-panel"/>
</property>
<property name="Client1_PerScreen" type="bool" value="false"/>
<property name="Client2_Command" type="array">
<value type="string" value="Thunar"/>
<value type="string" value="--daemon"/>
</property>
<property name="Client2_PerScreen" type="bool" value="false"/>
<property name="Client3_Command" type="array">
<value type="string" value="xfdesktop"/>
</property>
<property name="Client3_PerScreen" type="bool" value="false"/>
<property name="Client4_Command" type="array">
<value type="string" value="xfce4-settings-helper"/>
</property>
<property name="Client4_PerScreen" type="bool" value="false"/>
</property>
</property>
<property name="splash" type="empty">
<property name="Engine" type="string" value=""/>
</property>
</channel>
Last edited by rwd (2011-04-23 07:32:04) -
[SOLVED] xfce4-panel: Window buttons w/ Compiz
Hi, I've successfully done the seemingly daunting task of getting Compiz to work with XFCE. Everything appears to be set up, got my keyboard shortcuts in order, etc., however I don't like how the xfce4-panel's Window Buttons behave when running with Compiz. I have specifically set it to show only windows visible on the current desktop (or as Compiz calls it, viewports), but it looks like it still shows all windows from all viewports, as if like it treats all of them as one big desktop. I know this is a problem with xfce4-panel still thinking that it's communicating with xfwm, but I do like to resolve this annoying pet peeve. Are there any workarounds/fixes/patches for this that could help? Thanks in advance.
Last edited by qtcaroline22 (2012-05-17 01:53:05)I made Compiz autostart with XFCE using the first method with the Fusion icon as described in Compiz's Arch Wiki article. Perhaps it is related to Xfwm and Compiz running together? I'll try the other methods and see if the problem persists.
EDIT: I fixed it, I just followed the solution on this thread and everything works perfectly now. Seems like Googling with the right keywords will almost always point me to the solution.
Last edited by qtcaroline22 (2012-05-17 01:52:14) -
Xfce4 hangs opening terminal, etc.
Hi!
I'm having a _very_ strange problem with Arch + Xfce4 + old Compaq (Intel 82810 DC-100 CGC Chipset)
I have searched a lot of forums and it seems that people are having similar problems, just the solution is missing
So, the situation is:
I got the Xfce4 up and running with i810 driver. Everything seems to work fine until I try to open the terminal emulator, the one with an icon on the default xfce panel. Screen goes "rainbow" and it totally hangs, can't kill X by ctrl+alt+bspace. So I need to reboot from ssh or power button (is there a better way, not having to reboot?)
Now, the real strangeness begins:
I try and open xfce again. Sometimes it starts ok, some other time not. Gives an error: "Fatal server error: Active ring not flushed"
or in Xorg.0.log:
"(WW) I810(0): xf86UnMapVidMem: cannot find region for [0xb3a94000,0x3000000]"
Also yesterday I noticed that as root, I can use both startx and startxfce4.
Normal user gets xfce but not plain x... :S
Vesa driver works ok, but I can't get the resolution and refresh rate high enough.
I think there might be several problems because of different error messages etc...
One thing I found was a faulty memory module, gave ~20 errors in memtest before it was even 50% finished...
Removed it, no go still.
Or is it just the direction of wind and the position of the moon
End of the Xorg.0.log:
(==) I810(0): Write-combining range (0x44000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
pgetbl_ctl: 0x7200001 pgetbl_err: 0x1ffff000
ipeir: 0 iphdr: ffffffff
LP ring tail: 60 head: 2c len: f001 start 300000
eir: 0 esr: 1 emr: 3d
instdone: ff7a instpm: 0
memmode: 4 instps: 10
hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0
Fatal server error:
Active ring not flushed
xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/cyrillic"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
EndSection
# Auto-generated by mkxcfg
Section "Device"
Identifier "Card0"
Driver "i810"
VendorName "All"
BoardName "All"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by jorgg (2008-05-23 08:35:55)yea, I got the same problem wth xfce4 and Terminal, see this problem in the address above!!!
Last edited by jmrbcu (2008-05-23 14:32:05) -
Intel gma 4500mhd with displayport
Hello.
I have lenovo t500 (2055-2MG) and Dell 24" ultrasharp U2414H monitor. I connected it with displayport - minidisplayport to the notebook, but it does not work with intel gma 4500Mhd. The display shows No signal. I use Ubuntu 14.04 64 bit version.
I read about T410, that displayport is disabled on integrated graphics. Is it concerns for t500 also?
How can I use this integrated graphics with this external monitor?
Thank you.
BelaRoline wrote:
Try downgrading the intel video driver and disabeling KMS. I have the same chipset and exactly the same problems with xfce4-power-manager.
"I downgraded xf86-video-intel (2.10.0-1 -> 2.9.1-1) (+ disable KMS) and now everything works fine."
Thanks for the help! I've tried what you said above and disabled KMS as explained on http://wiki.archlinux.org/index.php/Intel. Disabling KMS didn't work with 2.10.0-1, but it did with 2.9.1.1.
I havn't been able to test wheter or not this solves the problems yet. It seams to me that the screen brightness is lower now, and that's good. However, for the screen-flickering problem I'm not sure if it's gone or not yet, and as for the the weirdness of the Power Management it is still there (it is still increasing the brightness lowers the brightness instead). However, that's a minor problem compared to the brightness changing itself all the time.
Last edited by erija952 (2010-03-10 13:27:02)
Maybe you are looking for
-
When using the speakers from my last PC, a compaq 5670 with onboard sound, on my new 865PE-based PC, the sound is way too low. With the volume set to max the output from the C-media thingy is just a step above whispering. The speakers work perfectly
-
My brand new ipod touch 5th keeps getting stuck on 'waiting to sync'. It's IOS 7.0.4, iTunes 11.1.3.8 and Windows 8.1 I've tried uninstalling and reinstalling iTunes and everything else Apple on my PC. Resetting and Restoring the ipod to factory sett
-
Automatic conversion of planned orders
Hi PP Gurus, I have a requirement to convert planned orders to production orders automatically. I believe SAP standard does not offer this functionality. The possible solution seems to be writing new program which could be a copy of C041 transaction
-
Update Trouble: Target Disk Installation?
Hey everyone... I've been trying to fix my laptop's installation of Tiger 10.4.6 for days now. I've gone through registry verification and repair. Hard drive repair... and even tried running external bootable cd solutions that only actually aggravate
-
Hello,<br /><br />I used Adobe Photoshop as a trial version. No just yesterday when I clicked on it, it said <br /><br />"Photoshop License Expired". <br /><br />So I uninstalled it & deleted all it's files.I then bought it from a friend of mine, add