Docking extention?

hello.
does anybody know if someone makes an extention device that enables you to dock your ipod- say in the bose soundwave for example- without taking it out of it's protective case?
thanks in advance for your reply!
cheers!
MacBook Pro 2.16 GHz Intel Core Duo Mac OS X (10.4.8) 17" , 2GB 667 Mhz DDR2 SDRAM

Have a look at this and see if it's what you are after: SendStation iPod Dock Extender

Similar Messages

IPhone 4 using iOS 6.0.1 will not play music through my car stereo

I have an iPhone 4 since it became available on Verizon's network. I have had no issues with my phone since I began using it. I own a 2008 VW Rabbit with the optional iPhone/iPod docking station to play music through the car's stereo. I purchased a docking extention cable because my phone would not fit on the docking connector properly due to my phone case. Everything has been working beautifully, sans the charging feature, until a few weeks ago. Normally, I would start the iPod app, load the song or playlist I want to play, and plug it in to begin hearing my music. However, recently the music stopped playing through my car speakers and only played through the built-in speakers on my phone once plugged into the docking station. I have tried hard-rebooting (holding home button/sleep button at same time until Apple logo appears), soft rebooting (holding sleep button to slide power off), exiting all open apps, opening/closing iPod app, changing different settings through the Settings app, etc. I am at my wits' end. I use my phone to listen to my loaded music, Pandora and Slacker Radio. It has gotten really boring listening to local radio during my commutes. Please Community, help me!

i have same problem in UK - my phone no longer works with my car cable - it will charge the phone, my ipad works fine, as does my old itouch so I know that the cable is ok. It comes up with no connection even though it is charging it. It used to be fine I dont understand why this would happen?
Loppers

HP Zbook 15, external monitor connected to docking station issue

Dear all
I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station.
After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
"If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
Best regards,
Murtaza
I did not find a way to attach the log file, so I put it here:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
[ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
[ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
[ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
[ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
[ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
[ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
[ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x449fffff] page 2M
[ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
[ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
[ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
[ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 0000000045e31000 000040
[ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
[ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
[ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
[ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
[ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
[ 0.000000] On node 0 totalpages: 4143388
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4334 pages used for memmap
[ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
[ 0.000000] Normal zone: 60344 pages used for memmap
[ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 66584576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2693.754 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000024] Security Framework initialized
[ 0.000038] AppArmor: AppArmor initialized
[ 0.000039] Yama: becoming mindful.
[ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004573] Initializing cgroup subsys memory
[ 0.004578] Initializing cgroup subsys devices
[ 0.004579] Initializing cgroup subsys freezer
[ 0.004581] Initializing cgroup subsys blkio
[ 0.004582] Initializing cgroup subsys perf_event
[ 0.004584] Initializing cgroup subsys hugetlb
[ 0.004602] CPU: Physical Processor ID: 0
[ 0.004603] CPU: Processor Core ID: 0
[ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005456] mce: CPU supports 9 MCE banks
[ 0.005469] CPU0: Thermal monitoring enabled (TM1)
[ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.005479] tlb_flushall_shift: 6
[ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
[ 0.006826] ACPI: Core revision 20131115
[ 0.015427] ACPI: All ACPI Tables successfully acquired
[ 0.015707] ftrace: allocating 31443 entries in 123 pages
[ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
[ 0.067065] TSC deadline timer enabled
[ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.067078] ... version: 3
[ 0.067079] ... bit width: 48
[ 0.067079] ... generic registers: 4
[ 0.067080] ... value mask: 0000ffffffffffff
[ 0.067081] ... max period: 0000ffffffffffff
[ 0.067082] ... fixed-purpose events: 3
[ 0.067082] ... event mask: 000000070000000f
[ 0.068367] x86: Booting SMP configuration:
[ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.166721] x86: Booted up 1 node, 8 CPUs
[ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
[ 0.174163] devtmpfs: initialized
[ 0.177951] EVM: security.selinux
[ 0.177953] EVM: security.SMACK64
[ 0.177953] EVM: security.ima
[ 0.177954] EVM: security.capability
[ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
[ 0.178592] pinctrl core: initialized pinctrl subsystem
[ 0.178637] regulator-dummy: no parameters
[ 0.178663] RTC time: 20:49:45, date: 04/17/15
[ 0.178689] NET: Registered protocol family 16
[ 0.178764] cpuidle: using governor ladder
[ 0.178766] cpuidle: using governor menu
[ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.178796] ACPI: bus type PCI registered
[ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.194702] PCI: Using configuration type 1 for base access
[ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
[ 0.194963] mtrr: corrected configuration.
[ 0.195520] bio: create slab <bio-0> at 0
[ 0.195643] ACPI: Added _OSI(Module Device)
[ 0.195645] ACPI: Added _OSI(Processor Device)
[ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.246512] ACPI: Dynamic OEM Table Load:
[ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.250664] ACPI: Dynamic OEM Table Load:
[ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.254498] ACPI: Dynamic OEM Table Load:
[ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 2.268291] ACPI: Interpreter enabled
[ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 2.268314] ACPI: (supports S0 S3 S4 S5)
[ 2.268315] ACPI: Using IOAPIC for interrupt routing
[ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.268475] ACPI: No dock devices found.
[ 2.270541] ACPI: Power Resource [APPR] (off)
[ 2.287340] ACPI: Power Resource [COMP] (on)
[ 2.287629] ACPI: Power Resource [LPP] (on)
[ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 2.298295] PCI host bridge to bus 0000:00
[ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
[ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
[ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
[ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
[ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
[ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
[ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
[ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
[ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
[ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
[ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
[ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
[ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
[ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
[ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
[ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
[ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
[ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
[ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
[ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
[ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
[ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.306776] acpiphp: Slot [1] registered
[ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.306850] acpiphp: Slot [1-1] registered
[ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
[ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
[ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
[ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
[ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
[ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
[ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
[ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
[ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
[ 2.315269] pci 0000:5d:00.0: supports D1 D2
[ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
[ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
[ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
[ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.324298] Found 1 acpi root devices
[ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.324522] vgaarb: loaded
[ 2.324523] vgaarb: bridge control possible 0000:01:00.0
[ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
[ 2.324635] SCSI subsystem initialized
[ 2.324664] libata version 3.00 loaded.
[ 2.324678] ACPI: bus type USB registered
[ 2.324688] usbcore: registered new interface driver usbfs
[ 2.324693] usbcore: registered new interface driver hub
[ 2.324707] usbcore: registered new device driver usb
[ 2.324786] PCI: Using ACPI for IRQ routing
[ 2.330294] PCI: pci_cache_line_size set to 64 bytes
[ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
[ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
[ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
[ 2.330402] NetLabel: Initializing
[ 2.330403] NetLabel: domain hash size = 128
[ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.330412] NetLabel: unlabeled traffic allowed by default
[ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.332489] Switched to clocksource hpet
[ 2.335878] AppArmor: AppArmor Filesystem Enabled
[ 2.335891] pnp: PnP ACPI init
[ 2.335898] ACPI: bus type PNP registered
[ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
[ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336141] pnp 00:01: [dma 4]
[ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
[ 2.336353] system 00:06: [io 0xffff] has been reserved
[ 2.336354] system 00:06: [io 0xffff] has been reserved
[ 2.336355] system 00:06: [io 0xffff] has been reserved
[ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
[ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
[ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 2.336939] pnp 00:0a: [dma 0 disabled]
[ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
[ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
[ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
[ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.337398] pnp: PnP ACPI: found 15 devices
[ 2.337399] ACPI: bus type PNP unregistered
[ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
[ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
[ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
[ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
[ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
[ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
[ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
[ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
[ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
[ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
[ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
[ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
[ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
[ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
[ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
[ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
[ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
[ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
[ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
[ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
[ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
[ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
[ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343341] NET: Registered protocol family 2
[ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.343782] TCP: reno registered
[ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.343907] NET: Registered protocol family 1
[ 2.343916] pci 0000:00:02.0: Boot video device
[ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 2.344387] PCI: CLS 64 bytes, default 64
[ 2.344426] Trying to unpack rootfs image as initramfs...
[ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
[ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
[ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.581892] Scanning for low memory corruption every 60 seconds
[ 2.582096] Initialise system trusted keyring
[ 2.582129] audit: initializing netlink socket (disabled)
[ 2.582137] type=2000 audit(1429303787.580:1): initialized
[ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.606581] zbud: loaded
[ 2.606685] VFS: Disk quotas dquot_6.5.2
[ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.606997] fuse init (API version 7.22)
[ 2.607048] msgmni has been set to 31698
[ 2.607084] Key type big_key registered
[ 2.607458] Key type asymmetric registered
[ 2.607459] Asymmetric key parser 'x509' registered
[ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.607514] io scheduler noop registered
[ 2.607516] io scheduler deadline registered (default)
[ 2.607531] io scheduler cfq registered
[ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.608123] vesafb: scrolling: redraw
[ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
[ 2.763515] Console: switching to colour frame buffer device 240x67
[ 2.917758] fb0: VESA VGA frame buffer device
[ 2.917770] intel_idle: MWAIT substates: 0x42120
[ 2.917771] intel_idle: v0.4 model 0x3C
[ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.917911] ipmi message handler version 39.2
[ 2.918057] ACPI: AC Adapter [AC] (on-line)
[ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 2.918201] ACPI: Sleep Button [SLPB]
[ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.918238] ACPI: Lid Switch [LID]
[ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.918261] ACPI: Power Button [PWRF]
[ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
[ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
[ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
[ 2.957440] ACPI: Invalid passive threshold
[ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
[ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
[ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
[ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
[ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
[ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
[ 3.003360] ACPI: Invalid passive threshold
[ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
[ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
[ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
[ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
[ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
[ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
[ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
[ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
[ 3.013706] GHES: HEST is not enabled!
[ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[ 3.056055] Linux agpgart interface v0.103
[ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
[ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
[ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
[ 3.353165] brd: module loaded
[ 3.353594] loop: module loaded
[ 3.353831] libphy: Fixed MDIO Bus: probed
[ 3.353886] tun: Universal TUN/TAP device driver, 1.6
[ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 3.353914] PPP generic driver version 2.4.2
[ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.353946] ehci-pci: EHCI PCI platform driver
[ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
[ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
[ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.368161] usb usb1: Product: EHCI Host Controller
[ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.368233] hub 1-0:1.0: USB hub found
[ 3.368238] hub 1-0:1.0: 3 ports detected
[ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
[ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
[ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.384149] usb usb2: Product: EHCI Host Controller
[ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.384234] hub 2-0:1.0: USB hub found
[ 3.384238] hub 2-0:1.0: 3 ports detected
[ 3.384329] ehci-platform: EHCI generic platform driver
[ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.384336] ohci-pci: OHCI PCI platform driver
[ 3.384342] ohci-platform: OHCI generic platform driver
[ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.384590] usb usb3: Product: xHCI Host Controller
[ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
[ 3.384673] hub 3-0:1.0: USB hub found
[ 3.384690] hub 3-0:1.0: 15 ports detected
[ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.385471] usb usb4: Product: xHCI Host Controller
[ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
[ 3.385551] hub 4-0:1.0: USB hub found
[ 3.385562] hub 4-0:1.0: 6 ports detected
[ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
[ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.394254] mousedev: PS/2 mouse device common for all mice
[ 3.394420] rtc_cmos 00:08: RTC can wake from S4
[ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.394608] device-mapper: uevent: version 1.0.3
[ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.394743] TCP: cubic registered
[ 3.394800] NET: Registered protocol family 10
[ 3.394914] NET: Registered protocol family 17
[ 3.394922] Key type dns_resolver registered
[ 3.395160] Loading compiled-in X.509 certificates
[ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
[ 3.395800] registered taskstats version 1
[ 3.397885] Key type trusted registered
[ 3.399811] Key type encrypted registered
[ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
[ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
[ 3.460705] regulator-dummy: disabling
[ 3.460903] Magic number: 11:175:852
[ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
[ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.462219] EDD information not available.
[ 3.462247] PM: Hibernation image not present or could not be loaded.
[ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
[ 3.463165] Write protecting the kernel read-only data&colon; 12288k
[ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
[ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
[ 3.478948] udevd[143]: starting version 175
[ 3.509828] pps_core: LinuxPPS API ver. 1 registered
[ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 3.511322] PTP clock support registered
[ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
[ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 3.513783] ahci 0000:00:1f.2: version 3.0
[ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.528600] scsi0 : ahci
[ 3.528832] scsi1 : ahci
[ 3.528908] scsi2 : ahci
[ 3.528979] scsi3 : ahci
[ 3.529074] scsi4 : ahci
[ 3.529152] scsi5 : ahci
[ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
[ 3.529186] ata2: DUMMY
[ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
[ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
[ 3.529192] ata5: DUMMY
[ 3.529193] ata6: DUMMY
[ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
[ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
[ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.612547] usb 4-1: Product: USB5534
[ 3.612548] usb 4-1: Manufacturer: SMSC
[ 3.612549] usb 4-1: SerialNumber: 1239567
[ 3.614189] hub 4-1:1.0: USB hub found
[ 3.614228] hub 4-1:1.0: 4 ports detected
[ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
[ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
[ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.849416] ata1.00: configured for UDMA/100
[ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
[ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
[ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.856471] hub 1-1:1.0: USB hub found
[ 3.856575] hub 1-1:1.0: 6 ports detected
[ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.100529] hub 2-1:1.0: USB hub found
[ 4.100626] hub 2-1:1.0: 8 ports detected
[ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
[ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.284596] hub 3-1:1.0: USB hub found
[ 4.284626] hub 3-1:1.0: 4 ports detected
[ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
[ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
[ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.579770] Switched to clocksource tsc
[ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
[ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
[ 4.702997] EXT4-fs (sda5): recovery complete
[ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
[ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.736090] usb 3-7: Product: HP HD Webcam
[ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
[ 4.777998] random: init urandom read with 97 bits of entropy available
[ 4.815946] init: ureadahead main process (382) terminated with status 5
[ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
[ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.915232] udevd[465]: starting version 175
[ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
[ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
[ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
[ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
[ 4.941014] lp: driver loaded but no devices found
[ 4.969070] Initializing HPQ6001 module
[ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
[ 4.977289] wmi: Mapper loaded
[ 4.985916] [drm] Initialized drm 1.1.0 20060810
[ 4.991703] hp_accel: laptop model unknown, using default axes configuration
[ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 5.013849] [drm] Memory usable by graphics device = 2048M
[ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 5.013874] Console: switching to colour dummy device 80x25
[ 5.030434] random: nonblocking pool is initialized
[ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
[ 5.036770] ppdev: user-space parallel port driver
[ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 5.039280] Copyright(c) 2003-2013 Intel Corporation
[ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
[ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.049977] Bluetooth: Core ver 2.17
[ 5.049990] NET: Registered protocol family 31
[ 5.049991] Bluetooth: HCI device and connection manager initialized
[ 5.049998] Bluetooth: HCI socket layer initialized
[ 5.050001] Bluetooth: L2CAP socket layer initialized
[ 5.050005] Bluetooth: SCO socket layer initialized
[ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 5.057904] Bluetooth: RFCOMM TTY layer initialized
[ 5.057915] Bluetooth: RFCOMM socket layer initialized
[ 5.057920] Bluetooth: RFCOMM ver 1.11
[ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.061074] Bluetooth: BNEP filters: protocol multicast
[ 5.061082] Bluetooth: BNEP socket layer initialized
[ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.063658] [drm] Driver supports precise vblank timestamp query.
[ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
[ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
[ 5.107863] lp0: using parport0 (interrupt-driven).
[ 5.117196] MXM: GUID detected in BIOS
[ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
[ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.136368] usbcore: registered new interface driver btusb
[ 5.139414] init: failsafe main process (863) killed by TERM signal
[ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
[ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
[ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
[ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
[ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
[ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.232078] hub 3-1.2:1.0: USB hub found
[ 5.232107] hub 3-1.2:1.0: 2 ports detected
[ 5.245239] Linux video capture interface: v2.00
[ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
[ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
[ 5.258213] usbcore: registered new interface driver uvcvideo
[ 5.258215] USB Video Class driver (1.1.1)
[ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 5.372070] lis3lv02d: 8 bits 3DC sensor found
[ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.385320] fbcon: inteldrmfb (fb0) is primary device
[ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
[ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
[ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
[ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
[ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
[ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
[ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
[ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
[ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
[ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
[ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.672470] usbcore: registered new interface driver usbhid
[ 5.672471] usbhid: USB HID core driver
[ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
[ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
[ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
[ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
[ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
[ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
[ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
[ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
[ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
[ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6.950914] Console: switching to colour frame buffer device 240x67
[ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.954405] i915 0000:00:02.0: registered panic notifier
[ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
[ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
[ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
[ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 6.960166] ACPI: If an ACPI driver is

@emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
Thanks for the input and links.

Can I dock my windows Laptop with IMAC?

Hi,
This would have been a no possibly even 3 years ago, but with the development of common software protocols allowing a flourishing application market, is it now possible for me to dock my Windows PC with a new IMAC. To the extent that the MAC is actually driving things using its OS.
4 Reasons:-
The first reason for wanting to use the Apple OS, is the fault of my overzealous company security settings which when in full flow like they are now on "Virus Scan Thursday" runs up about 90% of the RAM to the point is can take 5 minutes to open a basic forecasting sheet.
The second one is:- after using IPAD day to day for the past three years I can honestly say its one of the most intuitive devices to use, especially Numbers and Keynote. No more googling for formulas. To make my point about its simplicity, I draw your attention to Excels Autosum function which i'm sure you can remember is the Sigma symbol, so poor a symbol is it, that MS have to translate and scribe the words AutoSum in every common language known to man next to it, you opted for the = sign.
The third reason is:- Windows just seems so thrown together now that it might, and quite often does stop working and self destructs. A little bit like the Vauxhall Victor X type did in the 60's. Let me explain what I mean. Take the three next gen consoles on the market, Sony PS4, MS XBOX ONE, and the Nintendo WII U. My boys and are fortunate enough (my bonus payment not so lucky) to have the latter 2-following subsequent visits from a white bearded fellow. I like the shooty brash environments that are driven up in games like COD, which to be fair is the only real game on XBOX ever that I've played since getting over the shock that I could connect with other people over the planet and play them. Anyway before I run off track onto a rose-tinted day when me an my brother would divide the screen up into two sections using cardboard. When playing Goldeneye on the N64; one of us laying prone, one of us sat in an inflatable plastic sofa, both pair of eyes glued to the action on their OWN PORTION of the screen. The cardboard acting like the plastic piece separating two battleship players, neither one knowing the others position. But for the Xbox that's about it, the other games developers don't seem to get the game-play over graphics argument. In the case of some its either far-far too complex for concern, I'm thinking about those driving games with the flash cars and exquisite level of detail in the telemetry and how that car handles. Realistically how many of us have the time to play a full 24 hour Le - Mans - Grand Prix with all of the automatic, car control gadgets switched off. To the complete opposite where the game-play is sooooooo simple, take the reboot of tomb raider which took around 12 hours to clock with all of the collectables. Then you have thousands of apps to contend with. Zune, Music player, etc all bolted onto a bastardised win 8 setup. Then look at Nintendo, and its OS its refined and things seem to work, the published games are always excellent and playable by any age. The new Yoshi wool world looks amazing but it has the complexity of the stardome on Mario world.
The fourth and final reason is, it would probably save me 5 - 10 minutes a day swapping files over email etc etc... But, Its 5 minutes more I can spend with my boys practising their footballing skills and acting out their other ambitions, so that one day they don't have to worry about the appalling 1st world plight of interoperability problems between Windows and Apple! which like Oasis and Blur from Britpop England in the 90's and Love it or Hate it Marmite, realised that being ever so slightly different and arguing a bit about the relative merits of the new stuff, cautiously publicly insulting each other whilst really being squash buddies would ensure massive success for both of them!

See this thread.
http://discussions.apple.com/thread.jspa?messageID=878340&#878340

PCI slot in Thinkpad Dock II unusable

Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
For comparison, here's what my lspci looks like undocked:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.417 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e80)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (973.82 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 15, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 19, cardbus bridge: 0000:00:02.1
IO window: 0x00003400-0x000034ff
IO window: 0x00003800-0x000038ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PCI: Bridge: 0000:00:04.0
IO window: 4000-4fff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
Switched to high resolution mode on CPU 0
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt for device 0000:08:01.0 disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
Clocksource tsc unstable (delta = 142862014 ns)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (49 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0038, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PREFETCH window: 0x40400000-0x407fffff
MEM window: 0x40800000-0x40bfffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
Disabling IRQ #11
pccard: CardBus card inserted into slot 0
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
MadWifi: ath_attach: Switching rfkill capability off.
NET: Registered protocol family 23
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
ppdev: user-space parallel port driver
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PREFETCH window: 0x40c00000-0x40ffffff
MEM window: 0x41000000-0x413fffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c014007b>] set_process_cpu_timer+0x2b/0xd0
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
[<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
Disabling IRQ #11
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
CMD648: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Probing IDE interface ide1...
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
For comparison here is my dockless dmesg:
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.425 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1396.15 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
IO window: 0x00003000-0x000030ff
IO window: 0x00003400-0x000034ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Switched to high resolution mode on CPU 0
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142842086 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (50 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
pccard: CardBus card inserted into slot 0
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
NET: Registered protocol family 23
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.

I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.407 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
pci 0000:08:01.0: supports D1
pci 0000:08:01.0: supports D2
PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
pci 0000:08:02.0: supports D1
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
pci 0000:08:02.1: supports D1
pci 0000:08:02.1: supports D2
pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.1: PME# disabled
pci 0000:00:04.0: transparent bridge
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
pci 0000:00:04.0: BAR 9: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: IO window: 0x003800-0x0038ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
pci 0000:08:02.0: IO window: 0x004000-0x0040ff
pci 0000:08:02.0: IO window: 0x004400-0x0044ff
pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
pci 0000:08:02.1: IO window: 0x004800-0x0048ff
pci 0000:08:02.1: IO window: 0x004c00-0x004cff
pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
pci 0000:00:04.0: IO window: 0x4000-0x4fff
pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 0f index 0 io port: [1400, 14ff]
bus: 0f index 1 io port: [1c00, 1cff]
bus: 0f index 2 mmio: [30000000, 33ffffff]
bus: 0f index 3 mmio: [34000000, 37ffffff]
bus: 13 index 0 io port: [3400, 34ff]
bus: 13 index 1 io port: [3800, 38ff]
bus: 13 index 2 mmio: [38000000, 3bffffff]
bus: 13 index 3 mmio: [3c000000, 3fffffff]
bus: 08 index 0 io port: [4000, 4fff]
bus: 08 index 1 mmio: [40000000, 47ffffff]
bus: 08 index 2 mmio: [48000000, 4fffffff]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
bus: 09 index 0 io port: [4000, 40ff]
bus: 09 index 1 io port: [4400, 44ff]
bus: 09 index 2 mmio: [48000000, 4bffffff]
bus: 09 index 3 mmio: [40000000, 43ffffff]
bus: 0d index 0 io port: [4800, 48ff]
bus: 0d index 1 io port: [4c00, 4cff]
bus: 0d index 2 mmio: [4c000000, 4fffffff]
bus: 0d index 3 mmio: [44000000, 47ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pata_acpi 0000:08:01.0: PCI INT A disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142865538 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (24 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
Disabling IRQ #9
pccard: CardBus card inserted into slot 0
PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Error: Driver 'pcspkr' is already registered, aborting...
NET: Registered protocol family 23
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ppdev: user-space parallel port driver
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
cmd64x 0000:08:01.0: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c031007b>] cache_add_dev+0x215/0x44a
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
Disabling IRQ #9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
lp0: using parport0 (interrupt-driven).
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ACPI: EC: missing confirmations, switch off interrupt mode.
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
Note the "can't allocate resource areas"... And here is the new dockless dmesg:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.409 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
pci 0000:00:02.1: IO window: 0x003000-0x0030ff
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [1400, 14ff]
bus: 02 index 1 io port: [1c00, 1cff]
bus: 02 index 2 mmio: [30000000, 33ffffff]
bus: 02 index 3 mmio: [34000000, 37ffffff]
bus: 06 index 0 io port: [3000, 30ff]
bus: 06 index 1 io port: [3400, 34ff]
bus: 06 index 2 mmio: [38000000, 3bffffff]
bus: 06 index 3 mmio: [3c000000, 3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142862504 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (34 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pccard: CardBus card inserted into slot 0
PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Error: Driver 'pcspkr' is already registered, aborting...
usb 1-1: new low speed USB device using uhci_hcd and address 2
input: Video Bus as /class/input/input7
usb 1-1: configuration #1 chosen from 1 choice
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
NET: Registered protocol family 23
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
lp0: using parport0 (interrupt-driven).
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
ppdev: user-space parallel port driver
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it.

Macbook Pro slow startup, extra slow to load dock/interface

I have a Macbook Pro core 2 duo era 2007, OS 10.6.8, with an interesting problem I've not encountered in reading other issues. Here's the system profile, to get that out of the way:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version (system):          1.16f11
Serial Number (system):          W87*****AH
Hardware UUID:          00000000-0000-1000-8000-001******528
Sudden Motion Sensor:
State:          Enabled
Other than the faulty video card that seems standard for this run of the Pro, I have never had an issue. I have just replaced the battery from the original battery that came with the computer. It was useless to the extent of the word, but my budget did not allow me to purchase a new battery until recently. The battery info only stated "Replace Now" and the LED meter no longer functioned. The battery held no charge, and the computer only ran off of wall power. Up until a few days before I replaced the battery, this provided no trouble. However, it began one day to startup extremely slowly (5 minutes or more on the Apple logo startup screen, and then more time to load dock/top screen toolbar/etc. It also failed to recognize the external HD I frequently use with this computer. My theory was that it was simply underpowered on account of the failed battery, and the internal HD or the CPU was just not able to run properly. I finally put a new battery in hoping that it would fix the issue, but no avail. My startup time seems slightly less, but it seems as if the computer has not loaded interface protocols, as the computer is unresponsive to attempts to open the dock or a finder window, or even hover over battery or volume icons. After 5-10 minutes it finally kicks in and I can use my computer without problem, with the exception of the external HD, which will still not load.
I have run disk utility, verified my HD, no errors reported. I have the activity monitor up which shows a pretty minimal load on the CPU and disk usage. Nothing I can think of would explain the problem my computer has suddenly adopted. I love the **** out of this computer though, so any help is appreciated!

Stefan_Axel wrote:
120 GB, with 5.9 free. I've been running my laptop with about the same free:used ratio for a while without issue. I attempted a disk repair once earlier, but not using the install disc. I'll try that. The prompt reply is appreciated!
Well you're having issues now! Time to clean house! Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

No Dock - Frozen Desktop... Please Help!

Hey.
Alright well I have searched and searched this forum and many others and can't seem to find a solution.
The Problem: Yesterday the dock just quit popping up, so I shutdown and restarted this morning. This morning same problem plus i can't select any files on my desktop. I can access stuff through finder but that's it.
I have tried: restarting in safe mode - same problem
fixed corrupted preference files - i'm sure it helped somehow
fixed overlapped extent allocation files - again i'm sure it helped
ran first aid to repair permissions - still same problem
cleaned out all system cache files - no difference
A few other thing i can't recall now
My Specs:
iBook G4 10.3.9
1.33Ghz PowerPC G4
256MB
55.76GB Harddrive
7GB Free
If you can help on ANY WAY please do. I have tried everything I can find and think of. Oh yah, I don't currently have the OS disk.
Thanks.

You're Welcome cycleguy!
"It costs $100....is it going to be worth it?"
That depends on how corrupt your system became when the available space was compromised, and how important your data is to you.
DiskWarrior is a powerful utility, that many users report, has resurrected drives, that running Repair Disk from the system install disc, could not repair.
However, if your system became so corrupt that it needs to be reinstalled, you must have the System Install Discs
Please advise if you would like me to post where they are available for purchase.
If you do not have a recent reliable backup, each time you use your Mac, in it's present condition, you are jeopardizing more and more data on the startup drive.
And Thank You, for extending the courtesy, of awarding in  Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b

My Dock is broken. Stacks don't work, either. A little help? :(

Right, here's the problem:
http://www.birchlabs.co.uk/Dock1.png
The transparent black bezel is... messed up to the extent that it's painful to look at. If that were the only problem, I could put up with it, but it gets worse.
http://www.birchlabs.co.uk/Dock2.png
That's a stack. All I get is the broken bezels. No file names, no icons... I've got nothing. It's unusable (grid mode works fine, in case you're wondering).
Also, if you look in that picture, you'll notice that my separator has become invisible. What gives?
Note that I've only had this computer for a few hours. I transferred to it from my G5 iMac which ran Tiger. None of those Dock problems occurred immediately, I think they might've happened after I ran various full-screen programs - Joost, Halo, and the Java app Dofus Arena come to mind.
Also (though I don't think this is a bug), the shadows on the Dock icons look really horrible now, and I really struggle to figure out which apps are open (my screenshot should vouch for that; I'm pretty sure it's a lot less visible than it's meant to be).
I've rebooted and I've repaired permissions. I've installed all updates. I've done hours of Googling and checking the support forum, all to no avail. Could somebody please shed some light on this problem?

Huh. A few minutes ago, whilst I was doing nothing out of the ordinary, the screen went black, the computer stopped responding, and kept replaying the last half-second of sound it'd made on a loop. I force-rebooted, and now all of those problems are fixed. :/
What can I say... my computer is self-healing?

Bose Docking Station, Bose Headphones, and Shure e3 are incompatible

Can you believe it!!! Over $800 in above-mentioned accessories are incompatible!! Has anyone tried the extention for the headphones.
When I docked the Iphone in the Bose docking staion, I got a warning that it was incompatible? Will the Bose damange the iphone?

You are referring to the "Works with iPhone" program. What this refers to is this:
Devices designed to work with iPhone will have the "Works with iPhone" decal on them. This means that they have been designed so that they are resistant to the radio interferrence that GSM cell phones can generate. For example, have you ever been on your GSM cell phone and stepped too close to a radio or other electronic device with a speaker and heard a buzzing noise. "Works with iPhone" simply refers to devices that have been designed to be resistant to this type of interferrence.
Older devices, i.e. Bose Radio will also work with iPhone. They just arn't "Work with iPhone" certified. If one of these devices is connected to an iPhone, a warning message is displayed on the iPhone that says, "This accessory is not made to work with the iPhone." It then asks you if you want to turn on airplane mode. All this means is that the iPhone may generate some interferrence that could cause the buzzing noise mentioned earlier. Turning on airplane mode just turns off the phone's radio, hense no interferrence.
You can use your older devices with the iPhone. These devices WILL NOT damage the iPhone, nor will using them invalidate your warranty.
For more information on this topic, please see the following URL:
http://www.macrumors.com/2007/06/28/more-details-from-atandt-training-manual/
MacBook Pro Mac OS X (10.4.10)

Field List won't "Allow Docking"

Post Author: despec
CA Forum: General
Good morning....Within the formula editor, I no longer can dock the "Field List"...Anyone know what I need to do to get this box to dock instead of float? Thanks, David

Post Author: Qrobur
CA Forum: General
Well, if you search this site you will find some instructions on how to edit the registry to correct this error for versions 8.x through to 10. However, those instructions don't fix v11, which I'm using.In my case the "Field Tree" wouldn't dock. I fixed it by adding what appeared to be a missing REG_DWORD entry called 'Docking' here:HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports\Formula Workshop\Formula\ToolBar-Bar4I created the REG_DWORD 'Docking', gave it a value of 1 and voila! - I could dock the Field Tree again. I suspect ToolBar-Bar2 & -3 are the Functions and Operators Tree.If you use this solution, you do so at your own risk. I only fiddled to this extent because I was one step away from re-installing and I didn't really care if I fouled the program operation up completely.I'm amazed this bug hasn't been fixed though.

HELP! My Dock has gone!?!?

hi can any one help?
my dock has completely disappeared, its just not there, and when you go to dock preferences its just blank nothing selected but you cannot select anything? also certain short cut keys don't work, F9 and 10 etc for expose and also apple, shift and tab to flick through apps. i'm really stuck and don't know what to do? also you cannot drag anything to the trash as its not there and you cannot minimise any windows, you click the - but nothing happens! has this happened to anyone? can anyone help? anyone got any ideas?
please help thank you

hi
thanks for you help but this error is coming up:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Illegal name
Checking multi-linked files.
g Catalog hierarchy.",0)
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Checking volume information.
,"Invalid volume free block count",0)
(It should be 1646347 instead of 1647844)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
any ideas short of taking it to apple?

Problem with my Dock & HD??

I dont know how it happened but all of a sudden my dock disapeared and I had a couple of crashes when I was using Quicktime. And I played around with the syetem pref and all of that and got nothin. I saw a post on hear the same thing happened to someone else and the guy told him to restart the computer and if it crashed latley to run the disk utility and verify the hd. I think that fixed the problem for that guy, but when I did that this is what it told me
" Verifying volume “ff”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
Invalid volume free block count
uld be %@ instead of %@)",2)
7966236
7966234
The volume ff needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair"
Also I cant click on the finder at all really. I cant click on the background or cant click on any of the folders or anything on the desktop. I can click on the apple logo and right when I restarted a finder window opened up and I was able to open up safari. Another thing I have like a 80gb hd and I was using up almost all of it and then when I ran to verify the disk in the disk utility afterwards i noticed it was saying that I have 30gb free. But I dont know what that is about. Anyone have any idea on how to fix this or know what the error means that I fot from the disk utility?

Well, I can tell you first off that if you were "using all of it" in terms of your 80GB HD, that can be a leading contributing factor into the problems you're having. You should never have your hard drive filled to capacity because it will affect system performance.
Now, you stated that you VERIFIED your disk. Did you attempt to REPAIR the disk as it instructed you to do? Remember that verify and repair are different processes.
The only way to repair your HD is to boot from your installation disc and run Disk Utility from there.
That may fix it. Do that first (repair your HD) and then see what happens.
If that doesn't work, backup your HD first, then try a total clean and archive installation.

I cannot change from grid view to list view when i contol click on the downloads folder on the dock am i doing something wrong? if so how do i change the ?view in the dock

when i contol click on the downloads icon in the dock i get the gris view . I thought if you control click, you are able to change the view to fan or list. am I doing something wrong.? Icheck to make sure the contol key is working by doing a screenshot and it works there. What am I doing wrong?

Needs to be a Stack ?

I'm on ff 3.5.5 for Mac. I've been prompted twice to download latest version. Each time I have dragged the ff icon from applications folder to the dock and all seems ok. But next time I start ff it says I'm on 3.5.5 and should update to latest version!

There was no "update failed" message
I wonder whether I'm doing the right thing when I drag to the dock. There's only one ff icon in the applications folder. The first time I was prompted to update it showed that days date next to the icon as if the update was successful. The second time was a few days later but I think it was still the same date next to the icon (25/8/10) I've only just noticed that (on 10/9/10) so can't be sure but I'm sure the second time was around 2nd or 3rd of Sept.
Also, I am running two versions of ff- one is english, the other is the Italian version. They can't be opened at the same time but they seem to talk to eachother in the background, so to speak, because when I open one after a long gap, it opens with all the history and settings of the other one, right up to the last website I went to. I think I closed both when updating because it prompts you to close all programmes and restart (I think/ remember) so I just clicked ok to that prompt.
By the way, I got the prompt to update twice for ''BOTH'' the Italian and the English version- so 4 times altogether so it would seem that ff does recognise them as separate but still has problems concluding the update for each separate one respectively.
Thank you very much if you can help.
Trapperjohn

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I downloaded Maverick and now I can't open pages from the Dock. The Pages icon just jumps up and down abut doesn't open. However, I can one pages by clicking on the App. I have an iMac with iWork 08.

Since upgrading to Maverick from Mountain Lion I am unable to open Pages from the Dock. When I click on the pages icon in the dock the icon just keeps bouncing up and down. However, I can open pages by clicking on the icon in the Apps folder. No problems prior to upgrading to Maverick.

Quit Pages. Drag its icon out of the Dock. Create a new one by dragging the application into the Dock. Test.

Docking extention?

Similar Messages

Maybe you are looking for