DockinWindows 2nd Display

Hello,
it is planed to allow the dockedWindow to put it on a secondary Display?
At the moment only a sound comes if i receive a chat messages, it is planed to have a bubble like Skype?
If some one comes online from my contact list, it is planed also to have a bubble like Skype?
regards
Joerg

We cannot answer roadmap questions here as Cisco only releases future-looking information with an NDA. I suggest asking this question on the Collaboration User Group or to your Cisco account team.

Similar Messages

MacBook 2nd display (mini-DVI-DVI (D)- VGA)?

I am trying to hook up a second display to my MacBook. The problem is that I don't have a mini-DVI to VGA adapter, but I have a mini-DVI to DVI, and a DVI to VGA adapters. So I connected my Apple mini-DVI to DVI, to my DVI to VGA, and then to my 2nd display (NEC LCD1560NX). The notebook's image flips as i normally connect a second display, it auto-detects the 2nd screen and displays its correct name, but I do not get an image on my second display. It set to the right resolution and frequency.
Any suggestions?

go to system preferences -> display-> and mirror the displays, it should work on the second display, but the cons on the macbook is to work on the first display, the built in card may not support the second one, if thats the case i'm sorry i can't help it. you can also try to get a DVI/VGA splitter and see if that work, it works on standard integrated intel VGA models. good luck!

I can't seem to turn off my 2nd display (with no adapter plugged in)

Been looking on the internets for ages about this and not got anywhere, so did a completely fresh install last night.
The problem is that the DVI (2nd display connection) thinks that I have a VGA display connected (i.e. the 2nd display) when I plug in the DVI-VGA adapter to use with a TV that works fine. The 2nd display resets to align itself to the TV connected.
When I disconnect the adapter the Mac resets it display. Back to having this phantom display connected.
I've plugged in the DVI-VGA adapter as well and then carefully removed that and sameroblem.
Having done a fresh install that would mean it's not a software issue, so it has to be a hardware one? Something with the actual connection? Does anyone know of any potential problems as to why this would happen?
I've tried some compressed air. (I've lost the straw so it was straight from the can, spray paint style)
Please help.
Thanks.

Anyone?

2nd Display & iMac w/ 2 Different Sets of Content from Same iMac

Can I do this? (How can I do this?) I'd like to connect a second display to my iMac and use the iMac to generate content (like live feeds or video content from CNN.com) to play on the second display while I "work" on the iMac and its screen. Thus, each display have its own content--but the content is generated by the one iMac. Could I use a HD tv as the second display?
Thanks for your guidance.
Bill

Depends on the iMac, but some of them do support this.
Look yours up at http://www.everymac.com/systems/apple/imac/index-imac.html and look for the section about displays and 2nd display support under your model.
With the second display connected to the appropriate port, you use your Displays System Preferences to configure them. If you choose "mirror" both displays show the same thing. If you choose to not mirror, you can have an "extended desktop where you can place different windows on different monitors and do exactly what you want to do. AN HD TV might be usable but you have to look up what your iMac can handle in terms of pixels and resolution and compare that to your HD TV specs. You can certainly buy inexpensive monitors to use if your HD TV is compatible.

Connecting a 2nd display

HI,
I have a Mac Pro, circa Dec 07 (therefore no mini display port) and currently use a 23" cinema display. I want to attach another identical display and assume I can do this via the other (spare) DVI port at the back of the Mac?
However, my main monitor has the firewire and USB cables plugged into the tower which come cabled along with the DVI cable, but when connecting the 2nd display can I just connect the DVI cable into the Mac Pro and not bother with the firewire and USB cable which are bound with it?
Obviously I understand that using the firewire and USB cable from the first display increases my available ports (at the rear of the first display)... but do I really need to connect those with the 2nd display, because I'm running out of ports at the back of the Mac!
Hope that makes sense...
Thanks,
Mark

One thing that's occured to me, somebody might know...
I calibrate my main monitor, so when the second display is either being mirrored, or just an extension of the desktop, I guess the existing calibration is sufficient as the main display calls the shots?
Or am I wrong, should both be calibrated as separate displays prior to using them together?
Thanks to anybody who can help...
Mark

2nd display disappears on switching focus to another application

Hi,
I'm running LR5 on Windows. I've got the grid view on my primary display and a second display showing the loupe view.
If the focus moves to another application (i.e. a small notepad window on the primary display) then I can still see LR with its grid view in the background behind notepad on the primary display however the loupe view on the second display disappears and I can see the desktop.
Is it possible to configure LR not to automatically hide the 2nd display when the input foucs moves to a different wiindow? I'd like to be able to continue displaying the image on the 2nd display while I'm doing something else on the primary display.
I've not been able to check but I've a feeling this is new behaviour in 5, I don't think 3 or 4 did this.
Many thanks in advance for your time/help! :-)

No, sorry. I've just checked LR3 for you, and the behaviour's the same.

2nd display not as bright as first display

I have 2 facory video cards installed. They're the same (ATI 5770) each have mini ports and aldo DVI.
When I boot up each day at work, the second display won't go to full brightness. USBs are both plugged in and I do get the brightness control levers on the preferences for both displays. However, the 2nd display (at 100%) is just not as bright as the primary display. Both are the same 27" displays; each on their own dedicated video cards. I would say it is about 20% less bright.
Sometimes if I re-boot or reset SMC and monkey with it, I can get it to boot at 100% brightness but lately it's choosing on it's own to be dimmer. Switching USB ports didn't seem to have any effect. I am assuming it's a hardware issue bc I have reset PRAM, SMC, Disk Repair, trashing preferences, and so I'm a little bummed this expensive 27" LED display can't guage it's full brightness.
Thanks kindly for any input / solutions.

To post a hopefully helpful follow-up.. over past couple of days I got it to hold up its full brightness. To restore the full brightness of the 2nd display I disconnected / reconnected the display cable a few times until I noticed it was suddenly matching the full brightness of the 1st display. Is it the 2nd video card? The display? The G5 hardware/software? Can't say.
But after re-booting overnight, it retained the full brightness. Not sure why this happened/s, could be an isolated issue with something slightly defective?? Regardless, maybe this will help someone where both displays are not at full 100% brightness. Replug them a couple times to see if that tricks it back into action.
Remember, my toggles in the display prefs said both were at 100% yet the 2nd display was clearly 20% darker before I got them back to true 100%.
In the end, these LED displays are truely magnificent (aside from my isolated issue).

2nd display/monitor not working (strange problem)

hello,
I have a mac pro with this specification...
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          2 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system):          Y***Q2
Hardware UUID:          00000000-0000-1000-8000-0017F207E704
Display monitor Specs :
Chipset Model:          NVIDIA GeForce 7300 GT
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0393
Revision ID:          0x00a1
ROM Revision:          3008
Displays:
Cinema:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Mirror:          Off
Online:          Yes
Rotation:          Supported
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Problems facing....
My cinema HD is set to primary display and Cinema as 2nd display. Everything was working fine but suddenly my 2nd display stopped working. It remains black as if its in sleep mood. The small power led light on the monitor is On(not blinking). In Graphics/Displays shows both monitors are connected. I can drag any window to the 2nd display as if its working but its still black. In display preferences it shows both monitor on arrangement section. I can even change the resolution size of both monitors.
My cinema display monitor has no problem. I have checked it already. I have swapped the DVI ports at the back of my cpu but it seems only the 2nd port is giving this problem. As if no matter what my 2nd port of graphics card is on sleep mood. I have taken it to our local apple center and both ports were working fine there, the only difference is they checked it using none apple lcd monitor. But when I brought it back to office, it had the same problem again. The strange thing is....one day while I was working the 2nd display suddenly appeared but when I restarted my mac, it went back to the same problem. Till now my 2nd display not showing anymore. I have reinstalled to new OSx but the problem remains. So can anyone pls tell me how I can solve this problem.
thanks
<Edited by Host>

only the 2nd port is giving this problem
You have an older card, and the second port is flaky. The problem follows the port.
I am sorry to be so blunt, but the problem is YOU.
No one wants to be the one to club you on the head and point out that your card is dying, and you are going to have to get a new(er) one. There is no "quick fix" for dying Hardware, and no fix at all for you when you will not connect the dots and realize your card is on its last legs.
If running 10.6.4 or later, you can install the 5770 and it will work, but not at quite the advertised speeds if your slot will only go up to 8x.

2nd Display Question?

Hi! I've been using my ibook G4 12" for a few months now, absolutely loving it.
And I want to hook up a bigger 2nd display on my ibook, so I can watch movies more comfortable, but the manual says it won't support external display more than 1024x768, is that true?
Any advice will be appreciated.
Thanks!

Sorry! Got it, SSD.

2nd Display of macbook

I've read a few things about the subject but never had a clear anwser. I've read that the maximum resolution for the 2nd display of the macbook is 1920X1200. Doesn't help me if I plan to buy a 19'' inches with a maximum of 1440 X 900. I want to use the 19'' to expend my desktop. Will it work properly (without distortion)
If you have any infos about that thank you for your answer

1440x900 is less than the MacBook's maximum resolution of 1920x1200. That means it'll work just fine as a second display at its full resolution. You just can't run a display that's larger than 1920x1200, such as Apple's 30" Cinema Display. But the 23", for example, will work fine, as will anything smaller.

2nd display connected to iMac stays black (Thunderbolt - HDMI)

Hi everyone,
with my new iMac (purchased 2 weeks ago) I have the problem that my 2nd display will stay black after I connected it to the Thunderbolt port. The display shows the blue background for a split second, then i goes black (and stays that way). I find the following lines in the log file:
Feb 15 18:18:34 Edoras Dock[157]: kCGErrorIllegalArgument: CGSCopyDisplayUUID: Invalid display 0x003f003d
Feb 15 18:18:34 Edoras Dock[157]: uuid_callback_master: failed to retrieve UUID for display 0x003f003d (1001) (invariant failure)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: _NXGetScreenRect: error getting display bounds (1001)
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetCurrentDisplayMode: Invalid display 0x78c8d3f5
Feb 15 18:18:37 Edoras Terminal[513]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x78c8d3f5
The display is an AOC e2343F2, with two HDMI and one VGA port. I am using a Mini-Displayport to HDMI cable to connect the display. This worked with my Mac Pro (from 2006, AMD Radeon HD5770) without a problem.
Is this a problem with the in 10.7.x included drivers?
With the new Thunderbolt port?
I tried it with 10.7.2 and 10.7.3 on the iMac and the Mac Pro. It works like a charm on the Mac Pro, but not on the iMac. Do I need to buy the overpriced Apple adapter and can't use my adapter cable anymore?

Just a theory. Looking at the log errors you showed the system cannot get the display bounds. My theory is that the display is not able to pass the EDID (extended display identification data) through a TB port. While your 5770 could handle it the TB can't. Again, it's just my theory.
Another thing to check is your Displays system preferences. See if the Display is showing in the Arrangement tab. If so click Detect Displays and also Gather Windows to bring the second monitor's Displays preferences on to your main monitor. If you get this far then set the appropriate resolution and refresh rate (if refresh rate is shown).
If there is no Displays Arrangement tab then the system doesn't even know the second monitor is connected. I don't have a solution for this problem since I don't have TB. Although the resolution is not as good you may have to try a VGA adapter for that monitor. No guarantees that will work either of course.

2nd Display content

I'm able to connect my laptop to my TV and get a 2nd display which contains the Dock while my laptop retains the desktop folders. I know this is a simple question, but how do I direct items like videos or photos to show up on the 2nd display? I can drag windows onto the 2nd display but how do I get Full Screen to show up on 2nd display?

how do I get Full Screen to show up on 2nd display?
It depends on the application. For QuickTime Player 7 (Utilities folder), use "Present Movie" in its "View" menu. For VLC, it's "Full Screen Video Device" in its "Video" menu. For MPlayer OSX Extended, it's "Fullscreen Device" in it's "Movie" menu.

2nd Display has fast motion jitters . . .

I have a Dual 3.2GHz Quad-Core Mac Pro with 8GB RAM. I had the NVIDIA GeForce 8800 GT now have the NVIDIA Quadro FX 5600 and am getting the same issue with both. I have dual 30" displays setup as extended desktop. The primary display works fine but if I move a window on the 2nd display, it's really jerky, almost like the card is having a difficult time keeping up but that can't be it. Any thoughts?

Went to the genius bar in london and they weren't sure about why this was happening. They suspected it was caused by a software update to OS10.4, and recommended rolling it back by reinstalling the original OS from disc. (Perhaps someone sitting in America was unaware of Europe's PAL tv refresh rate...) Unfortunately my discs are currently in a port in Brasil waiting to be shipped home with all my other stuff, so I'll have a wait a month or so to try. If anyone at Apple is reading, can you check this out?

2nd Display not working on iMAC

I have a 2nd display that has recently stopped working with my iMAC - I had issues with the second monitor before I upgraded to 10.9 - then the problems went away ... had a bad storm one night and power flickered on / off. And can't get it to work since. I know the monitor / cord is good because i have an Mac Air and I plug it in and it comes right up and works great. I cleared the system log - unplugged and replugged the monitor in.. i don't see any errors in the system log.. can anyone see what is wrong? I cleared the log and put a marker on each side of the output.. I looks to me to see it - it say display added then right after that display removed..
4/11/14 10:19:24.832 AM Console[11817]: Marker - Apr 11, 2014, 10:19:24 AM
4/11/14 10:19:27.809 AM WindowServer[96]: Received display connect changed for display 0x42c0140
4/11/14 10:19:27.814 AM WindowServer[96]: Found 60 modes for display 0x042c0140 [39, 21]
4/11/14 10:19:27.835 AM WindowServer[96]: Received display connect changed for display 0x3f003d
4/11/14 10:19:27.835 AM WindowServer[96]: Found 1 modes for display 0x003f003d [1, 0]
4/11/14 10:19:27.836 AM WindowServer[96]: Received display connect changed for display 0x3f003e
4/11/14 10:19:27.836 AM WindowServer[96]: Found 1 modes for display 0x003f003e [1, 0]
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 60 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x1cbf8fef38ae9dfec93508341d780c47, ColorProfile { 2, "iMac"}
4/11/14 10:19:27.849 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.849 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.850 AM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.869 AM WindowServer[96]: Display 0x042c0140: Unit 0: Startup Mode 2560 x 1440, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80000000, ioModeDepth 0x2, IOReturn 0x0
4/11/14 10:19:27.869 AM WindowServer[96]: Display added
4/11/14 10:19:27.869 AM WindowServer[96]: Display removed
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 60 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x1cbf8fef38ae9dfec93508341d780c47, ColorProfile { 2, "iMac"}
4/11/14 10:19:27.870 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.870 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.899 AM WindowServer[96]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x7fccf9d04630 isBackBuffered: 1 numComp: 3 numDisp: 3
4/11/14 10:19:29.836 AM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/11/14 10:19:29.868 AM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/11/14 10:19:29.881 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.893 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.907 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.934 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:38.781 AM Console[11817]: Marker - Apr 11, 2014, 10:19:38 AM

You can attempt to use Apple Hardware Test, if you do run it in Extended Mode 2-3 times. It's not the most reliable test however if it does locate an error that confirms you have a hardware fault that needs to be fixed. The ONLY alternative is to take it in for service. However IMHO I'd take it in to an Apple Store or AASP anyway, because A) AHT is not that reliable and B) even if it does find something that means you have to take it in.

2nd Display LED won't turn off

I have a G5 with 2 23" Apple Displays connected to the Radeon 9600 video card. All is working well, but on shutdown the LED on 2nd Display (DVI-2 outlet on card) refuses to go off! If I unplug power supply then connect it back immediately the light will go off, but I see no reason why I would need to do this every time. Discussed with tech support 3 times, the 2nd time in parts were replaced, each time I get it back the same thing still happens. A new video card from Apple did not solve the problem either. Is the video card unable on shutdown to control both displays?? Any suggestions?
G5 Dual 2.0 Mac OS X (10.4.4) Dual 23" Display
G5 Dual 2.0 Mac OS X (10.4.4) Dual 23" Display

By the way, I own Dual 20" and I have run into this before. It took me a while to figure out that the problem goes away when the USB is connected. Before I figured it out, it was driving me crazy too.

DockinWindows 2nd Display

Similar Messages

Maybe you are looking for