DocProperty will not insert correctly

I am using Word 2010 Autofill option. I have a few document property fields set up for a document. There is one field that will not set. I set the property in the advanced properties-custom box along with the other properties that I have specified. In the
template I have inserted all of the properties in several places into the template from "quick parts"-"field"-"docproperty". There is one field "ProjectNum" with value "Project_Number" that will not stay. After
I insert it I can click outside it, then go back and right click it, and in the pop up it has a edit-field option which will display the property. Then I go work on another part of the doc and come back to the "Project_Number", right click
and the edit-field option will not be shown! At this point the "Project_Number" field is plain text! The other property fields work fine. I've also saved it as a new document template as well and have same problem. I tried renaming the field and
it's value as well.
Thanks

I'm not completely sure what you are doing or what is happening, but
a. if you click Alt-F9, does your property field show up looking something like this:
{ DOCPROPERTY ProjectNum \*Mergeformat }
? (that's the "field code" view of the field).
b. if you right-click on the result of a document property field, the right-click menu will display different options depending on whether Word has detected a spelling/grammar error in the result (which it probably will, if the "proofing language"
is set to English and the result is "Project_Number"). Even in that case, if you click Alt-F9 to show the "field code" view, right-clicking should reveal the "field code" context menu.
If that is what is happening and you want to avoid that problem, select the field result and go to Review->Language->Set Proofing Language..., and check "Do Not Check Spelling or Grammar"
Peter Jamieson

Similar Messages

Widget will not insert

Working with Dreamweaver and Flash software. Using a template, couldn't get flv videos to insert correctly, got a white blank box at the tested website. Finally downloaded widget as a solution, now widget will not insert. It appears on the insert menu, I put the cursor in the insertion point and click on widget, and nothing happens. I don't get the pop up widget box, I get nothing. At my wits end. Please help. Working on thesis project and deadline coming up soon.

After I posted, I noticed a similar post below. Couldn't reinstall Dreamweaver as I have a thesis project I've been working on for awhile stored there. Saw the fix to go to preferences and general and the problem was on the unchecked box to show dialog upon insertion. Once I checked that box, the widget pop up worked. Can't believe I have spent hours of wasted valuable time trying to figure this out. Thanks!

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Components will not resize correctly in Catalyst

Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
Ex. State 1:
Animation/Action Sequence to the following:
The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
and this when stretched out:
When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
Any guidance?
Message was edited by: joshlev

Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache since I could not see it on several computers that I had never pulled the site up on before.
And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
Thanks for all your help!
Liz

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

HT1349 itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario

ITunes will not install correctly on my PC with Windows 8. Any hints?

iTunes will not install correctly on my PC with Windows 8. Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates

I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. please help

I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. it stays on the opening screen and the message
shows up that I must update the mediathek. If I click on update the program shuts down. How can I fix this?

I downloaded the new iphoto and the upgrade
Does that mean, you are running iPhoto 9.6 on MacOS X 10.10.1 Yosemite? Or are you using an older MacOS X? "New" iPhoto is relative and depends on your system.
If I click on update the program shuts down. How can I fix this?
Does "shut down" mean it crashes? Then post please the error log from the error panel here - copy and paste the report into your next answer (the first 50 lines should suffice)
Where is your iPhoto Library (Mediathek) stored? Have you moved it to an external drive, or is it still in your Pictures folder (the order "Bilder")?

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Webpages will not load correctly on any browser

Hey all,
About 3 weeks ago I took the leap and upgraded my works PC from Windows 8 to 8.1 (as a test before doing the rest). Unfortunately since this time I've been continually encountering a major issue.
This issue is that webpages will not load correctly (about half the time). Since the day I upgraded I've had issues with this, across all browsers. Sometime a webpage will load, sometimes it'll partially load and sometimes it seems to have loaded but actually
hasn't (I.e. none of the links/inputs work). If I have an issue on a page, the only way I can get it to load is to click the stop button, navigate away from the page and then navigate back.
I've tries assessing the problem with Firebug and it seems that the HTTP transfer is being cut-off at a certain point (which is non-consistent). The webpage is then stuck in a state of 'Transferring data' and will never finish loading.
I've been looking around for answers and have come across some suggested solutions like running the All In One fix from tweaking.com, or flushing the DNS cache every few hours, but nothing is working.
Has anyone any suggestions for how I could fix (or even further troubleshoot) this problem?
Thanks
David

Please try a clean boot.
http://support.microsoft.com/kb/929135
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to open my iphoto?

My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to fix this? I would like to be able to see my photos again.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

SQLJ classes (Will not insert result into table)

/*@lineinfo:filename=SqljCircle*//*@lineinfo:user-code*//*@lineinfo:1^1*/import java.sql.SQLException ;
import oracle.sqlj.runtime.Oracle;
// iterator for the select
/*@lineinfo:generated-code*//*@lineinfo:5^1*/
// SQLJ iterator declaration:
class myIter
extends sqlj.runtime.ref.ResultSetIterImpl
implements sqlj.runtime.NamedIterator
public myIter(sqlj.runtime.profile.RTResultSet resultSet)
throws java.sql.SQLException
super(resultSet);
RadiusNdx = findColumn("Radius");
public int Radius()
throws java.sql.SQLException
return resultSet.getIntNoNull(RadiusNdx);
private int RadiusNdx;
/*@lineinfo:user-code*//*@lineinfo:5^33*/
class SqljCircle
//Main method
public static void main (String args[])
try {
// set the default connection to the URL, user, and password
// specified in your connect.properties file
Oracle.connect(SqljCircle.class, "connect.properties");
SqljCircle ti = new SqljCircle();
ti.runExample();
} catch (SQLException e) {
System.err.println("Error running the example: " + e);
} //End of method main
//Method that runs the example
void runExample() throws SQLException
myIter iter;
/*@lineinfo:generated-code*//*@lineinfo:28^1*/
// #sql iter = { select radius from RADIUS_VALS };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
iter = new myIter(__sJT_result);
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:28^45*/
while (iter.next()) {
// To see the radius values:
System.out.println(iter.Radius());
int radInput = iter.Radius();
double result=area(radInput);
// To see the result values:
System.out.println(result);
/*@lineinfo:generated-code*//*@lineinfo:38^1*/
//#sql { insert into RADIUS_VALS values(:radInput,:result) };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
int __sJT_1 = radInput;
double __sJT_2 = result;
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 1);
try
__sJT_stmt.setInt(1, __sJT_1);
__sJT_stmt.setDouble(2, __sJT_2);
__sJT_execCtx.executeUpdate();
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:38^51*/
/*@lineinfo:generated-code*//*@lineinfo:39^1*/
//#sql { commit };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 2);
try
__sJT_execCtx.executeUpdate();
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:39^13*/
iter.close();
// Utility function to calculate the area
public static double area (int rad) {
double pi=3.1415926;
double areacircle=pi*rad*rad;
return areacircle;
}/*@lineinfo:generated-code*/class SqljCircle_SJProfileKeys
private static SqljCircle_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new SqljCircle_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClassT(getClass());
private java.lang.Object[] keys;
private SqljCircle_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "SqljCircle_SJProfile0");
This SQLJ class compiles and runs ok, it retrieves a number from a table in my database, computes the result and prints them both out but it will not insert the result back into a table in my database, WHY????
Philip.

Thanks a million to all of you, the final working code;
Zed
<%
          String name = request.getParameter("name");
          String connectionURL = "jdbc:mysql://localhost:3306/";
          String dbName = "test";
          String userName = "root";
          String password = "";
     Connection connection = null;
     PreparedStatement pstatement = null;
     Class.forName("com.mysql.jdbc.Driver").newInstance();
try {
     connection = DriverManager.getConnection(connectionURL+dbName,userName,password);
     String queryString = "INSERT INTO employees(id, name) VALUES (id, " + "'" + name + "'" + ")";
     pstatement = connection.prepareStatement(queryString);
     pstatement.executeUpdate(queryString);
     catch (Exception ex) {
     out.println("Error = " + ex.toString());
     pstatement.close();
     connection.close();
%>

DocProperty will not insert correctly

Similar Messages

Maybe you are looking for