DocReady event problem

Hi everyone,
I am trying to perform a task in the interactive form I built using WD.
The task is (for our example) to display a message box when the document is ready : which means at the docReady event. But Nothing happens.
If I open the Adobe Designer standalone application (without WD) and write some code in the docReady event, it does work.
Why is there a diference ? What am I doing wrong ?
Thanks in advance.

Hi Luke,
I had a similar problem and the reason was that the SSL certificate on the server was not valid (without any errors or warnings).
You might want to first try to access the service from a browser and make sure you don't get any security warnings, if you get any security warnings, Adobe won't be able to call that service.
Hope this helps.
Thanks,
Vikram

Similar Messages

Adobe in WD : docReady event problem

Hi everyone,
I am trying to perform a task in the interactivr form I built using WD.
The task is (for our example) to display a message box when the document is ready : which means at the docReady event. But Nothing happens.
If I open the Adobe Designer standalone application (without WD) and write some code in the docReady event, it does work.
Why is there a diference ? What am I doing wrong ?
Thanks in advance.

Hi heidi ,
Ya I gone through documenation earlier but still not getting clue . Can you tell me one thing ...if I have Submit over my adobe form and if I wriring some method on ON_SUBMIT of interactive form UI element then if I am setting break point on ON_SUBMIT ..on click of Submit over interactive form it should come .Right ?
In my case its not coming in ON_SUBMIT.
Can you tell where I made mistake .

InputField fire event problem in webDynpro

I have one validation or Fire Event problem with respect to Inputfield in web Dynpro.
I have one Input filed and created the context varible for that, then i mapped the context varible to the InputField, and i changed the context varible type as date.So , when i run the view , it will show the calender near to the text box to select the perticular date. On select of the perticular date. It will populate selected date in to the inputField.
On selection of the perticular date. Based on the date i want to generate the next 12 months date at runtime in different text boxes. But the only event available for the InputField is only "onEnter". This is not useful in my case, bcz on selection of the Date , the user may not use the Enter key. so , how can use the other events like onSelection or onChange events in the InputFields to reach my needs.
Any one give me the idea to solve this problem.
Vijay

Hello Vishal,
You may also refer the sample code in the below link
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0c0dcacd-0401-0010-b4bd-a05a0b4d68c8">http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0c0dcacd-0401-0010-b4bd-a05a0b4d68c8</a>
Regards,
Sudeep.

More event problems

Hello again, I have yet another event problem. When I try to use this code I get an error saying Abstract class actionPerformed is not implemented in non- abstract class TableWindow. I'm not quit sure how I'm supposed to implement it.

Here is what I believe to be the relevant code. addWindowListener works but addFocusListener returns the error.
// Table window
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.*;
import javax.swing.event.*;
public class TableWindow extends Frame implements ActionListener
public TableWindow ()
Create Window
super ("Test Window");
setBackground (SystemColor.control);
setLocation (0, 0);
setLayout (new GridLayout (5, 5));
addWindowListener (new WindowAdapter ()
public void windowClosing (WindowEvent e)
try
if (Connected == true)
// Close the Statement
stmt.close ();
// Close the connection
con.close ();
catch (SQLException sqle)
dispose ();
System.exit (0);
tPane = new JTabbedPane ();
tPane.addChangeListener (new ChangeListener ()
public void stateChanged (ChangeEvent c)
//Status.setText ("Clicked");
tablePane = new JPanel ();
recordPane = new JPanel ();
recordPane.addFocusListener(new FocusListener()
public void focusGained(FocusEvent e)
Status.setText ("Clicked");
queryPane = new JPanel ();
TName1 = new TextField (25);
TName2 = new TextField (25);
TName3 = new TextField (25);
idField = new TextField (10);
idField2 = new TextField (10);
TitleField = new TextField (25);
TitleField2 = new TextField (25);
result = new TextArea ("Under Construction", 5, 30);
NewT = new Button ("New Table");
NewR = new Button ("New Record");
NewQ = new Button ("New Query");
NewT.addActionListener (this);
NewR.addActionListener (this);
NewQ.addActionListener (this);
TNameLabel1 = new Label ("Enter name of table here");
TNameLabel2 = new Label ("Enter name of table here");
TNameLabel3 = new Label ("Enter name of table here");
idLabel = new Label ("Enter movie ID here");
TitleLabel = new Label ("Enter title of Movie here");
TitleLabel2 = new Label ("Enter title of Movie here");
tablePane.add (TNameLabel1);
tablePane.add (TName1);
tablePane.add (NewT);
recordPane.add (TNameLabel2);
recordPane.add (TName2);
recordPane.add (idLabel);
recordPane.add (idField);
recordPane.add (TitleLabel);
recordPane.add (TitleField);
recordPane.add (NewR);
//recordPane.add (tableChoice);
queryPane.add (TNameLabel3);
queryPane.add (TName3);
queryPane.add (TitleLabel2);
queryPane.add (TitleField2);
queryPane.add (NewQ);
queryPane.add (result);
Status = new Label ("");
// make the window and add components to it
tPane.addTab ("Table", tablePane);
tPane.addTab ("Record", recordPane);
tPane.addTab ("Query", queryPane);
add (tPane, BorderLayout.CENTER);
add (Status, BorderLayout.SOUTH);
pack ();
setVisible (true);
public static void main (String args [])
ConnectToDatabase ("vdds");
TableWindow tw = new TableWindow ();
}

App.execMenuItem("SaveAs") don't work in docready event

Hi all, I create a dynamic PDF using LiveCycle Designer ES 8.1.1 The client uploaded the document to it server and the users download the document via a website. I added the "app.execMenuItem("SaveAs")" command to the docReady event, the user must save the document before he/she complete it. The save as popup work 100% fine if the docuemt is opened in Adobe reader or Prof. but when the document is opened in a browser the popup don't appear. any suggestions? Regards, Chris

Could you please confirm the browser being used here.
Make sure the plugin used here is from Adobe Acrobat/Reader : https://support.mozilla.org/en-US/kb/disable-built-pdf-viewer-and-use-another-viewer
Thanks,
Wasil

Events problem with (Java and ActiveX)

Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.

I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

Help needed with Image Events problem

Hi there I'm writing what I thought was a simple script to convert a folder full of images from jpg to tiff. But the script fails when trying to convert the first image in the folder. Instead of converting the image, Preview opens with the image shown and I get this error message: error "The variable ImageRef is not defined." number -2753 from "ImageRef".
I have seen some posts about other people having the same problem, but I haven't seen any solutions.
Here's the script.
on run
tell application "Finder"
set PicturesFolder to ((path to home folder) as string) & "Pictures:SenseCam" as alias
set Photographs to (get entire contents of PicturesFolder) as alias list
end tell
tell application "Image Events"
launch
repeat with Photo in Photographs
if (Photo as string) ends with "jpg" then
set ImageRef to open Photo
save ImageRef in Photographs as TIFF
close ImageRef
end if
end repeat
end tell
tell application "Finder"
repeat with Photo in Photographs
delete Photo
end repeat
end tell
end run
Thanks in advance for any help.
John

Hello
You may try something like the modified code below.
Noticiable changes :
#1 - Removed the parentheses. Your original code won't yield alias list but a list of finder objects, which is the reason why Preview opens the image. (The statment 'open finderObject' behaves the same as double clicking it in Finder)
#2 - Only delete the original jpeg files which are converted to tiff.
#3 - Build new path for converted image.
#4 - Save in new path. (When saving image in a format other than its original format, always save the image to a new file and do not attempt to overwrite the source file.)
cf.
http://www.macosxautomation.com/applescript/imageevents/08.html
on run
tell application "Finder"
set PicturesFolder to (path to home folder as string) & "Pictures:SenseCam:" as alias
set Photographs to get entire contents of PicturesFolder as alias list -- #1
end tell
set DonePhotos to {} -- #2
tell application "Image Events"
launch
repeat with Photo in Photographs
set Photo to Photo's contents
set oldPath to Photo as string
if oldPath ends with ".jpg" then
set newPath to oldPath's text 1 thru -5 & ".tif" -- #3
set ImageRef to open Photo
save ImageRef as TIFF in newPath -- #4
close ImageRef
set end of DonePhotos to Photo -- #2
end if
end repeat
end tell
tell application "Finder"
delete DonePhotos -- #2
end tell
end run
Hope this may help,
H

ICal all-day event problem

iCal on my iPad worked fine for a while. Now, many of my all day events (but not all of them) are showing up a day early on my iPad on week view. Everything is fine on all other devices (iPhone, MacBook) and all is fine on iPad on day, month and list view. All timed events are in the right place. But all day events in week view are a disaster and turning off the iPad isn't helping. Any advice?

Did you travel out of your home time zone and first notice the problem then? I spent an hour and a half on the phone with Apple Care while I was in the Central zone (I live in Eastern) and nothing the supervisor suggested worked (deleting the account, resetting, turning ipad off, etc). They'd bumped me up to a supervisor because the regular guy had no idea. Supervisor said no one on the internal tech board had seen that particular problem. The final assumption was it was a software glitch on my ipad--the advice was a complete restore which was going to have to wait until I returned home because he said it would take too long over the Verizon mi-fi I was using while traveling. Anyway--I got home to Eastern time, immediately pulled out the ipad to do the restore and all the all-day events were in the right place and have remained in the right place since then. My best guess is that it's a time zone issue but it doesn't make much sense. All my timed events stayed right where they were supposed to be the whole time (time zone support turned off).

Creation of an event : problem with the container

Hi Gurus,
I'm facing a problem in creation of an event.
I'm in SAP ECC 6.0 for a migration project from 4.6B
In an ABAP program I'm trying to create an event in order to launch a workflow.
1st step : Set datas in the container -> In INTERNAL_TABLE I have 5 lines.
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container.
2nd step : Create an event :
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = w_wf_objtype
 objkey = w_wf_objkey
 event = w_wf_event
 creator = applicant
 start_recfb_synchron = 'X'
 TABLES
 event_container = event_container
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 WRITE sy-subrc.
 ENDIF.
Now when I check my container with SWI2_FREQ I see that INTERNAL_TABLE has just one ligne, the rest disapears.
I have this problem only when I set an internal table in an container
I don't know why, but it perfectly works on 4.6B.
Thanks a lot
Walid

Hi,
I dont see a point in having this statement
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container. Infact it is not needed !!
SWE_EVENT_CREATE like any other FM, take a
lt_var type standard table of SWCONT.
ls_var type SWCONT.
fill your ls_var with all fields and append it to lt_var each time and pass lt_var to event_table of SWE_EVENT_CREATE. It should work !!
However, suggested way is to use SAP_WAPI_CREATE_EVENT instead of SWE_EVENT_CREATE from ECC 5.0 onwards. There are fe concerns with SWE_EVENT_CREATE mainly with respect to commit and persistancy. Better we should use SAP_WAPI* as much as possible from ECC 5.0.
Try above and Good Luck !!
Regards
Krishna Mohan

Mac OS / classpath / custom event problem

I'm having a bit of trouble with a particular classpath
anomaly, and I have a feeling that it might be a Mac thing.
Not sure if anyone else can reproduce this, but I managed to
make a custom event and a class that extends the EventDispatcher
once. Since then, Flash has refused to admit that any class
associated with a custom event exists - mostly producing the error
1046. Even after you take out any references to the event
dispatcher or a custom event, the class is ignored.
All my classes are kept in a single 'Packages' folder with
sub folders that I include in the import statement (I've
triple-checked the classpath settings, the import statements, and
the classes themselves - I have probably a hundred or so other
classes that are fine, and all referenced in the same way, some
that extend EventDispatcher, some that don't.
I come across this a few times now - once I was able to fix
it by putting the .as file in the same folder as my first custom
event, but this no longer works.
I'm running Mac OS X 4.11 on two computers - both have the
same trouble.
I've tried copying the classes to other folders and changing
the package/import path accordingly - no go.
Even stranger, if you copy and paste to a new .as file, and a
different package folder, the problem persists in that Flash claims
the revised Package statement (to reflect the new location) does
not reflect the position of the file - when it clearly does.
I haven't had this problem with any other home-grown class -
only those that reference a custom event.
It sounds like it should be pilot error, and I've spent a
long time trying to spot a silly mistake. But as this problem has
recurred a few times now, I'm beginning to think it isn't me.
Anybody else experience similar classpath problems with AS3
on a Mac? Anybody have any suggestions?

I am also a newbie and my answer could be wrong.
But from the looks of it, You are Unable to load performance pack.
The solution is "Please ensure that libmuxer library is in :'.:/Library/Java/Extensions:/System/Library/Java/Extensions:/usr/lib/java
I hope BEA or someone can tell you the file name of libmuxer. And make sure it is in the Folder where the script is searching/looking.
Good luck.
fred

ABAP OO Event Problem

Hi,
I read the blog posted by Jocelyn Dart-Raising ABAP OO Events for Workflow...
/people/jocelyn.dart/blog/2006/07/27/raising-abap-oo-events-for-workflow
When I tried the same using my own Class, I am getting some problem.
Well, I created my Class with two Attributes
1) M_POR(Persistent Object Reference Attribute)
2) PERNR(Employee Number)
And I created a Constructor with one parameter.
And I also coded the remaining standard methods as per that blog - USING ABAP OO Methods in Workflow Tasks.
Finally I activated my CLASS and each individual method.
I created one small report that raises ABAP OO Event as mentioned in the blog with the below mentioned code.
report yworkflowtrigger_ooabap.
data : ls_ywftest1_key type p_pernr,
 lv_objtype type sibftypeid,
 lv_event type sibfevent,
 lv_objkey type sibfinstid,
 lr_event_parameters type ref to if_swf_ifs_parameter_container,
 lv_param_name type swfdname,
 lv_visit_date type datum.
lv_objtype = 'YWFTEST1'.
lv_event = 'STARTEVENT'.
Set up the LPOR Instance id
ls_ywftest1_key = '00000024'.
move ls_ywftest1_key to lv_objkey.
try.
 call method cl_swf_evt_event=>raise
 exporting
 im_objcateg = cl_swf_evt_event=>mc_objcateg_cl
 im_objtype = lv_objtype
 im_event = lv_event
 im_objkey = lv_objkey
 IM_EVENT_CONTAINER =
 catch cx_swf_evt_invalid_objtype .
 catch cx_swf_evt_invalid_event .
endtry.
I switched on my event trace and tried raising the Event. But event is not raised even after execution of this code. I checked the SY-SUBRC value at the ENDTRY, But this seems perfect(SY-SUBRC = 0).
Why is my event not getting triggered even after the execution of above code?
Is there anything which I have missed.
We are on ECC 5.0
Regards,
Raja Sekhar

I missed this tip in that blog.
"Tip! Just as for Business Object events, the COMMIT WORK statement is crucial when raising a Workflow event - without this the event will not be raised."
Regards,
Raja Sekhar

Client Eventing Problem with URL Iview

Hi,
I am new to EP and have a basic client eventing question. We are trying to integrate a URL Iview from a partner product with a standard Iview downloaded from Iviewstudio. This standard Iview is capable of handling client events from other Iviews in the standard package. We want to re-use this Iview with the same event (same functionality) to be able to handle events from the partner URL Iview.
The partner Iview and our portal are on different servers.
We are using the following Javascript but it doesnt seem to raise the event.
EPCM.storeClientData('urn:com.sap.bor:BUS0010','objid',LocId));
EPCM.storeClientData('urn:com.sap.bor:BUS0010','AllKeys','objid');
EPCM.raiseEvent('urn:com.sap.bor:BUS0010','select','','/irj/servlet/prt/portal/prtroot/...'
We were able to debug and find that the data was being stored in the Data Bag. However the event is not being raised at all. It seems that it just gets stuck somewhere in the Raise event. We even put a javascript alert after the raise event but it doesnt seem to reach there at all.
Could you give me a few pointers as to what the problem might be.
Thanks in advance.
Message was edited by: Mayank Bhatnagar

Hi,
let's have a look at two quotes of the PDK documentation.
"Using the EPCF from your JavaScript, you can send messages to JavaScript code embedded in other iViews."
"Isolated iViews are iViews that are not inlined into a portal page, but referenced using an IFRAME. To make the EPCF available in such iViews, the EPCF JavaScript as well as the EPCF applet are included into each generated frame."
From my point of view, this only can work automatically with content provided by the portal.
Therefore, this can't work with isolated URL iViews generated with the wizards. Imagine a google iView, running in an iFrame. Google is called by the portal, but it's simply standard google HTML output - displayed in the portal.
To provide the capability of the EPCF, the epcf javascript file has to be included in the "partner URL iView"'s source. I tried this and it worked. However, this is not a highly sophisticated solution
If the partner iView's server is running in a different domain, there are further issues to be considered (keyword: java script origin policy)
If anybody has corrections or can provide a good solution, don't hesitate.

KeyReleased event problems

Hi everybody,
i have a JTable and what I want to is that when the user type something in the TextField the table will show the names of the company that start with the letter that the user typed. But the problem is that each time the user type the event executes 2 times, this is the code:
private void txt_searchCompanyKeyReleased(java.awt.event.KeyEvent evt) {
TableModel model = jt_Company.getModel();
ArrayList<String[]> dataArray = new ArrayList<String[]>();
String[] data = new String[ jt_Company.getRowCount() ];
String s = txt_searchCompany.getText();
System.out.println("Cantidad de filas: " + jt_Company.getRowCount()+ "\nCantidad de col: " + jt_Company.getColumnCount());
for(int i = 0; i < jt_Company.getRowCount(); i++)
 for(int j = 0; j < model.getColumnCount(); j++)
 if(model.getValueAt(i, 1).toString().startsWith(s) == true)
 data = model.getValueAt(i, j).toString();
 dataArray.add(data);
 System.out.println(" " + data[0] + "Tamano de ArrayList: " + data. length);
jt_Company.setModel(new Business.CompanyTable(dataArray));
}//End of the method
the method compares very well the string and the name of the companies in each row, but as mention before the method do it 2 times that means that the string array will the double of rows.
How can I do to make the event execute only one time
Thanks a lot.......

Hi,
KeyListener is not probably a good idea for you. You should use DocumentListener. for Example:
jTextFieldIP.getDocument().addDocumentListener(new DocumentListener()
 public void changeUpdate(DocumentEvent e){}
 public void insertUpdate(DocumentEvent e)
 try
 jListCode.setSelectedIndex(Integer.parseInt(jTextFieldIP.getText()));
 catch(NumberFormatException ne)
 JOptionPane.showMessageDialog(null, "Only numbers in this field please.");
 public void removeUpdate(DocumentEvent e)
 insertUpdate(e);
} );

Labview event problem

Hi guys
I have a problem with the event case. I have a Button called "CON". This Button have to start two deferent Event Structurs by change his value, but not on the same time.
Between the Event Structurs i have two Case structurs with other stuff. Wehn i first press the button, it will be make the stuff twice (like i press the button twice). I have no idea why.
thanks for Help

Because each event structure has its own event queue. So when you press the button, all event structures that are registered for that value change event will have it queued up. So your first event structure sees the event and runs that event case. The second event structure can't run yet due to data flow, but it has the event queued up. So when that second event structure is reached, it can run that event case.
In general, your VI should only have 1 event structure. This makes handling events A LOT simpler. Look into the state machine. That will help you handle your events properly and in a central location.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Non Tempo-Event problem

Hi,
I keep getting a "Non Tempo-Event Found in Sync Reference" alert, every time I try to do a tempo change, and the "Unable to sync audio and midi" afterwards.
I am only using external midi in sync with a quicktime movie (without audio). No other audio in the project.
(Btw. does anyone know how to turn of the vertical mouse-zoom that happens when you try to navigate in the timeline?)
Mac pro 3 OS 10.5.2
FW 1884 audio/midi interface
Xiste

I found that in my tempo list, there was an odd event that I didn't place there, and I think that was what was causing this error message although, now my MIDI is extremely delayed, to the point where it is unplayable when composing.
The playback is fine, but anything I play live is really delayed, and it is only in this song! It reminds me of the problems people had when trying to import some Logic 7 songs and getting delayed MIDI. It is the smae problem here, but this is a song composed entirely in L8.
Any ideas to this new delay problem? The MIDI was fine at the beginning of this composition...

DocReady event problem

Similar Messages

Maybe you are looking for