Docs about Interfaces between CO and BW/BI

Hi all Gurus,
I am just looking for documents about Interfaces between FI/CO and BW/BI. Can any body provide me the required documents. It is very urgent.... [email protected]
Thanks in advance
SIM
Edited by: SIM on Feb 22, 2008 12:19 PM

Hi
You are right. I meant the interfaces between FI/CO and BW/BI. Namely how do we build the Interfaces such as IDOC and other interfaces between them. I need practice oriented docs with all steps towards building interfaces.
Thanks
SIM

Similar Messages

IDOC Interface between CO and BW

Hi Gurus
I am just looking for documents about all interfaces between CO and BW/BI. Can any body supply me these??
Thanks in advance
SIM

Hi Joe-
There are several How To guides that provide detailed instructions on how to automate transactional and master data loads from NW BW into BPC. Please check out the following guides:
[How to Migrate Transactional Data|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0427318-5ffb-2b10-9cac-96ec44c73c11]
and
[How to Automate Master Data Loads|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827]
Regards,
Sheldon

Interface between WM and SD

Hi,
Is there anybody who can give me the details of the interface between WM and SD through shipping module?
It would be nice to have few info about WM /PP and WM/QM.
Thank you in advance.

Hi,
The interface is mainly through the LEWM movement type configuration. You need to define the Interim storage type and movement types required to sales process prior to that.
After you are done with the above settings, then you can configure for the 2 step picking. If you need it.
Thanks,
Mono

Interface between paravision and labview

Hi,
Does any one here who can help or give some idea how to make an interface between paravision and labview software???I need to acquire captured MRI image from paravision and store it to Labview.
I would appreciate for any kind of assistance.
Kind Regards,
Jasim

Hi Jasim,
Could I get a little more information about how you are importing the MRI image into LabVIEW?
1) How are you getting the MRI image into LabVIEW?
2) What image format will the image be in?
3) What will you be doing to the image once it is in LabVIEW?
Best Regards,
Bill
Bill E. | Applications Engineer | National Instruments

Doubt about diference between SAPconsole and SAPmobile

Hello,
     I have been many doubts about diference between sapconsole and sapmobile, if anyone could help me I appreciate.
1) I have ECC6 instaled, the SAP Mobile is compatible with ECC6 or I need of Netweaver Instaled ?
2) If Possible to Install Sap Mobile in ECC6 , I have to Buy a license of sap mobile ?
3) in any product instaled Windows CE have possible to install sap mobile ?
4) In sap console what is the requirement for to do this configuration?
I Anybody to know about this informations please explain for me ?
Thanks

My apology,
    The Basic Diference beteween SAPConsole and SAPMobile is :
SAPConsole ==>
1 ) Don' t need a new Hardaware for to configurate
2 ) Only need a Machine with the IIS service installed
3 ) The SAPGui CD content the SAPCOnsole.exe for configuration
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network( but if to have a entrance in the SAPGUi indicate a SAProuter in another factory is possible to have acesses.. ) is a mandatory. Cause the SAPCOnsle folow the SAPGUI entrances and need a LAN or a WAN configurated.
Advantage
simple to congurated and chip.
Easy to create to new window cause the SAPConsole only plubish this window in Browser.
Disadvantage
Need a lincense for each Poket or Datacolletor, wherever the equipment you will use.
Doesn't have a Database using through Browser (IE6 or IE7) this way , during the processes lost network you go to lost the information not saved.
SAPMobile
1 ) Need the a good Machine with a instance of SAP configurate
2 ) Have to found the EXE in the MarketPlace
3 ) is not publish, and yes a client with the database configurate in equipment
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network
Advantage
Need only one SAP License, doesn't metter how many equipment in use you have.
As the SAPMobile has a Database in the client , if you lost the network it goes to save in the local database and when the network come back , it will to synchronize. This way you don't need to work online every moment, you get to synchronize after.
Disadvantage
You profit in license is your lost in the Machine cause the price of Machine is expensive.
is configurate only in windows Mobile.
The window only can be create for a Developement and not in the SAP, have been created in windows Mobile.
A tip, the both is good but you can do a simple mathematics.
In the SAPConsole how much money you go to spend is the least of the Machine s Price.
If yes confurate the SAPConsole , if not configurate the SAPMobile

Interface between sockmod and udp

Hi,
where can find info on interface between sockmod and udp stream modules. Iam specifically looking for how sockmod and udp/tcp modules inform each other of the destination ip/port numbers, source port number etc... any help would be greatly appreciated.
Thanks,
Surya

Hi,
In our case we are using
IDOC-XI--SOAP ( For all Outbound scenarios)
In this case ask abt wsdl files for SOAP Structure
HTTPXI--IDOC ( For all Inbound scenarios)
In this case POS will directly post the message to intergration server direcly by using parameters like namespace , IS details
Regards
Seshagiri

Interface between Legacy and SAP for Equipment Master

Hello
I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
Thanks
Harkamal

20,000 is on quite higher side for IDOC.
IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
Transaction IE01 - Create equipment
Transaction IE02 - Change equipment
Structure - IBIPEQUI Equipment record
                 |->    IBIPNSTA     New status profile if necessary
                 |->>   IBIPSTAT     User status records
                 |->>   IBIPDOCU     Doc. from Doc. management system
                 |->>   IBIPPART     Partner details (comment below)
                 |-->> IBIPTEXT     (see comment below)
                          for long text:          TEXT_MARK = " " empty
                          for internal comment:   TEXT_MARK = "1"
                 |-->> IBIPCLAS    Classification record (eqpmt class)
                     |-->> IBIPFEAT     Classification characteristics,
                                           ie. features for the class
                 |-->> IBIPBDCD     see below (from screen 102)

Suggestions about interface: graph, directed and undirected graph

Hello all,
I'm having some doubts about the right 'choice' of interfaces. I'm designing a little library for graphs and I was thinking about the difference between directed and undirected graphs, and how I should reflect this in the library. My apologies for my bad English.
There is a small, but elegant, difference between directed and undirected graphs. Therefor, I don't know if it's worth to distuingish this difference in interfaces or not. I'll explain the difference by example. Usually, you can ask a directed graph the following queries:
- all out-edges of a node + the total of such edges (outdegree)
- all in-edges of a node + indegree
- the successors of a node
- the predecessors of a node
The same questions can be asked to a undirected graph, but the in-edges and the out-edges of a node are equal, the successors and the predecessors are equal, etc... Thats basically the only difference between directed and undirected graphs.
I found some solutions to define graphs, directed graphs and undirected graphs by means of interfaces.
[1] one interface, duplicate methods, no tagging interfaces
public interface Graph {
    Set getOutEdges(Node node);
    int getOutDegree(Node node);
    Set getinEdges(Node node);
    int getinDegree(Node node);
    Set getSuccessors(Node node);
    Set getPredecessor(Node node);
    boolean isDirected(); // no tagging interface
}[2] one interface, duplicate methods, tagging interfaces
public interface Graph {
    Set getOutEdges(Node node);
    int getOutDegree(Node node);
    Set getinEdges(Node node);
    int getinDegree(Node node);
    Set getSuccessors(Node node);
    Set getPredecessor(Node node);
public DirectedGraph extends Graph { } // tagging interface
public UndirectedGraph extends Graph { } // tagging interface[3] three interfaces
public interface Graph {
public interface DirectedGraph extends Graph {
    Set getOutEdges(Node node);
    int getOutDegree(Node node);
    Set getinEdges(Node node);
    int getinDegree(Node node);
    Set getSuccessors(Node node);
    Set getPredecessor(Node node);
public interface UndirectedGraph extends Graph {
    Set getTouchingEdges(Node node);
    int getdegree(Node node);
    Set getNeighbors(Node node);
}In the first solution, you dont know at compile time whether a graph is directed or undirected. However, it is very elegant for algorithms, since a lot of algorithms work for directed and undirected graphs. The main disadvantage of this solution is that you have duplicate functions in case of of undirected graphs: getOutEdges and getInEdges return the same set, etc.
The difference between the first and the second solution is that the second solutions gives a way to detect whether a graph is directed or undirected at compile-time.
The third solution has two seperate interfaces. This is much logical, and you know the graphtype at compile-time. However, this approach might lead to bloated code, as the algoritms for undirected and directed graphs now have two graphtypes (this can ofcourse be fixed by itroducing some kind of decorator, which in fact simulates the first solution).
As I don't have much experience in design, I can't forsee any big problems or disadvantes of one of the approaches. Therefor, I would like to ask for your opinion. What approach is most common and best practice?
Thanks in advance.

I would tend to go with true inheritance for this case. There is a strong ISA relationship between a graph and uni-directional and bi-directional graphs. Programming to an interface (as in the Lyskov substitution principle) will give you a parallel heirachy of interfaces and implementations. This can become a problem if you start out not knowing what interface needs to be published, but in the case of graphs this should not be a problem. With a heirachy all the shared code can be written once. In this case the specialized code will just simplify calling more general code in the parent class.
If all your graphs fit into memory then the implemenation should not be a problem. I used to work with map data where the graph does not fit into memory. Then you have to be careful about your interface or you will be getting calls that cannot be properly optimized "behind the scenes". Another specialization is in game programming where nodes are not actually expanded until they are "arrived at". Then you have to keep information about what parts of the structure are fleshed out and which are provisional.

Block Demand Depend Interfaces between ECC and SCM

Hello All.
Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
I need to do this because ECC writes over my plan in SCM.
Thanks and Best Regards

Hello PrasunM
For example:
When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
Best Regards.

LSO : need informations about relation between course and training need

Hi all,
i need some informations about relation between course (object E) and training need (object TN). After some tests, i note in my environment (SAP ECC6) that this objects are not related, there is no occurrence in table HRP1001. So, why ?
Cheers

Hi,
tranining needs (TN) are linked to training types (D).
You can also find information in SAP Service Marketplace
http://service.sap.com/hrfr under France -> Media Center -> Training Needs Management
Regards
Frank

Interface between ABAP and Excel-report

Hi anyone!
I need to implement a BAdI (CRM_MKTTG_SEG_MEM_EX) for displaying an aggregated BW field in the CRM Segment Builder. However my programmer knows little about the interface between ABAP an Excel. He therefore struggles with the programming. Have anyone of you any suggestions for how he can call a field in a query. Has anyone used this BAdI for the same purpose?
Thanks, Camilla

Hello Camilla,
i think you should ask your question in a generic form in the BW forum. Ask them for access to a Query via RFC.
Regards
Gregor

Interface between XI and BIZTalk

Hi Guys,
Can any help me here In Middleware
1. i need some INputs between XI and BIztalk
like what are XI Futures and BIZTAlk
2. WHat sort of Adapter need in XI to make a Connectivity between XI and BIZTALK.
Advance thanks..
Thanks
Raj

Hi,
Please check this two documents:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a73e8127-0a01-0010-b19f-f72ee1c2403c
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/107c7a27-0a01-0010-be82-92347921ae03
Regards,
Wojciech

Hi plz any body knows about difference between po_vendors and ap_vendors_v

Any body knows about the difference between po_vendors and ap_vendors_v .plz send me the solution regarding this.
thanks & regards
Raghavendra
09962651456
[email protected]

Any body knows about the difference between po_vendors and ap_vendors_v .plz send me the solution regarding this.
thanks & regards
Raghavendra
09962651456
[email protected]

Question about transfer between oracle and sql server

Could i program to transfer lots of data between Oracle and SQL Server quickly?
I have tried make two connection between two databases, but it took me lots of time to transfer data.
How could I do it?
Thanks

Hi,
If you need to move data fast, then use the Oracle Migration Workbench to Generate SQL Server BCP data extraction scripts and Oracle SQL Loader files.
This is the fastest way to migrate the data.
In the Oracle Model UI tab of the Oracle Migration Workbench, right mouse click on the tables folder. there is a menu option to 'Generate SQL Loader ...' scripts. This will help you migrate your data efficiently.
Regards
John

About integration between SAP and non-SAP applications via javaidoc classes

Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton

Docs about Interfaces between CO and BW/BI

Similar Messages

Maybe you are looking for