Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

Hi All,
We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command.
Our CMTS has the following components
ESR-PRE2: x1
ESR-PRE-MEM-FD128: x1
UBR10-DTCC: x2
UBR-MC20X20V-5D: x1
iOS version: 12.2(33)SCE3
Part of running-config as follows
cable spectrum-group 13 band 22800000 26600000
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 59.0
no rf-channel 0 rf-shutdown
interface Cable8/0/0
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 spectrum-group 13
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
diag output attached herewith. Please any one advice on how to resolve this issue.
Thanks in advance.

Similar Messages

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Hi
Chamie7 wrote:
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.
I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
CCT

I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
Official statement from Apple:
http://support.apple.com/kb/ht3152

Faxing - Modem Does Not Detect Dial Tone

Hello Everyone,
I suddenly have a need to send and receive a Fax. I have a phone line plugged into the modem port on my G4 and on trying to send a text fax, not much happens. Error message to the effect that the modem is not detecting a dial tone. Same cable that works fine on the phone itself.
Can someone either help with an answer or direct me to a page with more detailed instructions than the "Help" file is providing?
John

I have the same problem. I thought I would begin to use my several years old Powerbook to send a simple fax. As it is I have to use my old G3 to fax. Even with Faxstf pro on I still can't get it to work. Fax STF says that the modem is only set to receive and I just cannot change it in the settings. I've trashed the preferences and the program. I am at a loss after having spent a day trying to figure this out. I am on a dedicated phone line that works just fine. I would really like to just simply fax from my powerbook G4. The modem is as follows:
Modem Model: LastDash
Interface Type: USB
Modulation: V.92
SKU Name: UCJ
Hardware Version: 4.0
Firmware Version: APPLE VERSION 2.6.6
Driver: InternalUSBModem.kext (v2.6.6)
Country: B5 (United States, Latin America)

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

For itunes 11: movie that are not purchased via itunes are loaded into and catagorized as "home videos". I want all of my movies in one spot under Movies as they always were. How can i tweak this?

for itunes 11: movie that are not purchased via itunes are now loaded into and catagorized as "home videos". I want all of my movies in one spot under Movies as they always were. How can i tweak/resolve this?

Cdaver wrote:
I have this issue too and want the same result, another feed suggests selecting the movie, going to get info, and changing this under options, but I suppose you have to do that movie by movie.
You can select all the movies you want and change them at once.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

HT201272 The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on either my iphone or ipad. I have tried the previous suggestions. Can you offer further advice.

The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on my iPhone 4 or my iPad2. I have tried previous suggestions on the support page. Can anyone suggest further solutions?

Hello BwarsIG88
Check your purchase history by going to the iTunes Store and then click on purchases. From there you can see all your purchase history and download what you are missing.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G.

The types of the parameter field and parameter field current values are not compatible.----

HI,
I am attempting to set report parameters in my .jsp code via URL parameters.
I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
The parameter on the report is a String Type, named for this example p1.
The value that p1 represents is LERAD
My code:
String stringValue = request.getParameter("p1");
CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
returns the above mentioned error.
I have tried:
String stringValue = (String)request.getParameter("p1");
which returns the above error
And;
String stringValue = new String(request.getParameter("p1")).toString();
which returns
java.lang.NullPointerException
java.lang.String.<init>(Unknown Source)
org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
Any ideas???

Hi,
nevermind.
case sensitivty strikes again.
my URL param was P1 ( case sensitive)

The security module of these banks: "Banco do Brasil", "Santander" and "Caixa Econômica Federal" are not compatibles with firefox 4.0

the security module of these banks: "Banco do Brasil", "Santander" and "Caixa Econômica Federal" are not compatibles with firefox 4.0

the security module of these banks: "Banco do Brasil", "Santander" and "Caixa Econômica Federal" are not compatibles with firefox 4.0

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

Similar Messages

Maybe you are looking for