"Doctor Who: The Classic Series" - Corruption and Audio/Video Glitches

Has anyone else had problems with the "Dr. Who: The Classic Series"?
First off, I am unable to download "Episode 1" of "Carnival of Monsters". I have tried to download on 2 different Macs and one PC, all stop around 90 MB (error 8008).
Secondly, all 4 episodes from "The Claws of Axos" are riddled with audio pops, coupled with simultaneous video glitches. During "Episode 2", it actually throws the audio out of sync for the remainder of the episode.
I highly suspect these files are corrupt at the server side. Just checking to see if anyone else has had similar issues.

Sorry, but there's no way to know. Apple doesn't pre-announce additions (except for limited pre-orders on albums) and there aren't any alerts for specific shows except for season passes which don't really apply to the Dr. Who Classic shows where every full story is a "season".
You'll just have to keep checking back from time to time.
Regards.

Similar Messages

  • Doctor Who: The Classic Series - not being listed by series!

    I've bought 2 series from Doctor Who: The Classic Series on the iTunes UK store. However, in the TV Shows section, instead of being listed by series, they're all stuffed in together, so you get ep1, ep1, then ep2, ep2 etc. See http://www.yoxi.net/aragh/doctorwho.jpg for a screenshot.

    Can't confirm.
    My podcasts have decided again to "not able to play on this device" again...
    Soooo I am podcastless.....
    Good luck.
    Which podcast is it?
    Stargazer and Stardate are my problem children.

  • Problem with Doctor Who: The Classic Series

    Thank you for taking the time to look at this question.
    I recently purchased "Doctor Who: Ghost Light" from iTunes, but when I downloaded it, the three episodes were placed in between the first three episodes of "Time and the Rani" on my copy of "The best of the Seventh Doctor". Is there a way that I can get the episodes of Ghost Light listed separately? I have already tried changing the artist name and the album name.
    Thank you.

    You need to sit with them and watch. Then check it before they leave. Apparently they're hit and run not spending a minute more than they absolutely have to. This is largely due to the flat rate fee they get for a speific type of call or part swap.
    So I ask you where are the caps then if they're not put on and they were there before?
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Thinkpad Yoga: Strange honking sounds and audio/video glitches

    WARNING: LOUD VIDEO EXAMPLES
    I have a Thinkpad Yoga, type 20CD with Windows 8.1, and when I'm running some white noise to help me concentrate, I get these strange honking noises that are quite disruptive. Even worse is that when I'm trying to watch a video on youtube, the honking noise occurs and this seems to lead to quick stalls in the video as well (note: the major stall in the middle of this video may just have been a bit of lag, I meant to highlight the minor stalls like the one that occurs at around 2 seconds). Actually, it seems that the honking causes the entire system's video to stall (e.g. cursor stalls, clock stalls, etc)
    I've found only one other thread dealing with this issue and it wasn't resolved.
    Addressing the suggestions brought up in the linked thread:
    1) The problem occurs regardless of if I'm using the laptop's built-in speakers or my headphones. I don't see any reason to hook it up to my TV and check HDMI out.
    2) Yes, problem persists with headphones.
    3) The problem occurs whether I'm using the lowest quality or the highest quality audio.
    4) It's the whole system, not just one application.
    5) The microphone has nothing to do with it. Enabled or disabled, the problem still persists.
    I've updated my audio drivers but this hasn't done anything to mitigate the problem.
    Strangely enough, what does help is turning off my WiFi (i.e. Fn + F8). When the honking is occuring, I can switch the wireless card to airplane mode and the problem immediately goes away. I've read somewhere that this may be because of poor grounding on the audio card, meaning that the antenna is possibly picking up radio signals.
    Are there any possible solutions to this problem? 

    cesario85 wrote:
    OK The sticky label says SB0240
    Here's the screenshot:
    [img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
    I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
    Audigy shares IRQ with IDE controller and firewire controller. This is not good.
    NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
    Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
    NOTE: You may need to reinstall OS to get this done.
    Also you may need to enable APIC mode on BIOS.
    How To:
    A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
    B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
    C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
    D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
    E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
    .jtpMessage Edited by jutapa on 09--2005 0:23 PM

  • My Ipod classic is corrupted and I only get the red X on the screen...Cannot move to any other screens. Any ideas on fixing without paying Applw?

    My Ipod classic is corrupted and I only get the red X on the screen...Cannot move to any other screens. Any ideas on fixing without paying Applw?

    Unfortunately there isn't. A Red X is usually an indicator that the HDD has failed, if you are unable to restore the device using iTunes and also not able to reformat using windows prior to restoring then a hardware repair is needed. If your iPod is out of warranty then the pricing you pay is to have the iPod replaced not repaired. You're looking at 129.00 - 179.00 plus shipping depending on the gen.

  • I cannot install itunes from the apple site .. it keeps saying the software is corrupted and cannot install correctly.. help!!!

    I have tried to install the software from several sites including the apple site and they all say that the software is corrupted and did not install correctly to delete and reinstall. this seems unlikely as it has been weeks since I have been retrying the sites with the same results...is there an apple download that will check my pc for any errors that may be keeping the itunes from installing.. or is there anything else i can do to fix the issue.. its unlikely that itunes could stay corrupted for so ling without noticing it and fixing the issue..thank you...

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Protected View Error "The file is corrupt and cannot be opened"

    All 
    I have a problem with Protected View in Office 2010 on Windows 7.
    Symptom:  When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened.  This
    is impacting both Word and Excel.  I haven’t tested other applications.  The user gets the error "The file is corrupt and cannot be opened.".
    Expected behaviour:  Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
    Troubleshooting Results:
     -      If I turn off Protected View the error goes away and the documents open without
    issue (but not in Protected View obviously)
    -      If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
    -      If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
    -      If I repair Office the problem is NOT fixed
    -      If I reinstall Office the problem is NOT fixed
    The problem doesn't impact all machines, but any new machine I build suffers the problem.  All Protected View options are set by group policy and all machines are getting the correct settings.
    -       The setting “Enable Protected View for files originating from the Internet” is enabled
    -       The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
    -      The setting “Enable Protected View for Outlook attachments” is enabled
    -      Enable Data Execution Prevention mode is enabled
    Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause?  There are lots of postings on this around the various Internet forums, but most
    just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
    Thanks.
    James.

    Thanks for coming back, James, and I'm glad you've found the source of your
    problem.
    As an aside, I had no idea HP made software like that and will take a look
    at it - or would if I could. Personally, although I love their hardware, I
    wouldn't touch HP software, and the fact that their web page doesn't load
    (in IE8) just reinforces my feeling.
    Enjoy,
    Tony
    www.WordArticles.com
    "jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
    > Will, thanks for taking the time to post some suggestions. I understand
    > Protected View perfectly well and my post is because Protected View is not
    > behaving as it should. I think my dot points above show this, still,
    > thanks for taking the time to post. I think Tony is more on track with
    > his questions around what has changed in my build, and this is the area
    > I've focused on over the few days since posting.
    >
    > I've pulled my build apart and put it back together and found the issue.
    > This was tedious to say the least, but turned out worthwhile. A program
    > we used called Trim Context Desktop
    > (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
    > is part of our SOE. This is a records management tool, but we only use a
    > small feature set, and all the Office integration options that can be
    > configured during install are turned off, but it turns out that the
    > application still impacts Office. If I uninstall the Trim client from our
    > SOE, Office Protected View starts working as expected. We knew the full
    > Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
    > we didn't use the Office integration features we were OK. All our testing
    > was around the application and it works fine, I just didn't connect it to
    > the Office issues until systematically eliminating changes from the SOE
    > build. Keep a log of your changes!!! It helped me reverse things until I
    > found the problem.
    >
    > Uninstalling Trim also fixes and issue I had in Outlook where the
    > previewers wouldn't display Office documents, reporting that the
    > previewers were not installed.
    >
    > We will go to HP to get some support and advice around this before putting
    > Trim back in to the SOE.
    >
    > Anyone - if you have similar problems, can I suggest you look at all your
    > Office add-ins and also any applications that may potentially hook in to
    > Office.
    >
    > Cheers all.
    >
    > James.
    >
    >
    >
    Enjoy,
    Tony
    www.WordArticles.com

  • HT1766 I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved

    I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved. Can anyone help?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Outlook 2010 error - The file is corrupt and cannot be opened

    Hi experts
    Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
    I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
    the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
    Thanks

    Hi,
    You can try using the Fix it tool in the following KB article to fix the issue:
    http://support.microsoft.com/en-us/kb/2387587
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
    I hope there is a fix for this, cause it *****!!!!

  • When Password Protected - The File Becomes Corrupted and I Can Not Open It

    I have password protected two files now in Excel 2007.  After opening and then saving a few times, the file becomes corrupted and I cannot open.  The following error message appears  "Excel cannot open the file"XXXX.xlsx" because
    the file format or file extenson is not valid.  Verify that the file has not been corrupted and that the file extension matches the format of the file.
    The files that I created contains sensitive information and I really need to get to them.l

    You can try to open these files with 'Open and Repair' .
    1.Start Excel.
    2.click the Microsoft Office Button, and then click Open.
    3.In the Open dialog box, click to select the file that you want to open.
    4.Click the down arrow on the Open button, and then click Open and Repair.
    Also this issue could be  caused by malware on the affected machine
    Please see:http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
    Some one works out this issue with remove the xlsx entention,give it a try.
    1. rename the file and remove the .xlsx or .xls extention etc e.g. if my file is called test.xlsx I remove the '.xlsx' - you will get a warning message saying this could make the document unstable - accept it
    2. the document icon should now have turned white (the document won't look like an excel document anymore)
    3. open a blank excel document by hitting start -> all programs -> Microsoft office -> excel (this may be different if your not on windows 7)
    4. in your blank excel document hit file -> open
    5. navigate to the document you renamed above and select it, now click open

  • I bought a song, and it says the file is corrupted and will not download what should i do?

    I bought a song, and it says the file is corrupted and will not download what should i do?

    If you see the "Purchased" option on the main screen of the iTunes Store, here's what I'd do:
    1) Go into your library and delete the file if it downloaded. If not, go to your downloads and delete it from there to stop it from download.
    2) Go to the Purchased pane in the main iTunes Store section, locate the item, and try the download again.
    Also, you may wish to turn off any anti-virus or anti-malware programs before you try this again, as that sometimes is what can be blocking the download. Otherwise, contact iTunes Store Support:
    http://www.apple.com/emea/support/itunes/contact.html

  • "This ipod cannot be updated. The files are corrupted and unreadable"

    This message now appears when I connect my ipod to itunes....
    "This ipod cannot be updated. The files are corrupted and unreadable"
    The ipod still works and charges, but it will no longer let me add new files to it. The contents of my ipod are still displayed as usual on itunes, so it obviously is reading it to some degree. It advises me to run a chkdsk utility, but I have no idea how to do this.
    Has anyone encountered a similar problem? Does anyone know how I can fix this problem?
    Many thanks

    If your iPod is corrupt then you have no choice but to restore it.
    Before you do that, you may have some success getting the music off it and onto your hard drive again.
    Check out the instructions/suggestions here.
    Music from iPod to computer.

  • Why after downloading a pdf am I getting that the file is corrupt and can not open?

    why after downloading a pdf am I getting that the file is corrupt and can not open?

    Probably the file got corrupted during the download?  Download it again.
    If that does not correct the problem, can you share that file download?

  • Every time I try to download Firefox, it says the file is corrupt and then the download window disappears.

    I can't download Firefox. Every time I try a popup says the file is corrupt and the download goes away. What do I need to do to make the download work?

    Download a fresh Firefox copy and save the file to the <u>Desktop</u>.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

Maybe you are looking for