Doctor Who: The Classic Series - not being listed by series!

I've bought 2 series from Doctor Who: The Classic Series on the iTunes UK store. However, in the TV Shows section, instead of being listed by series, they're all stuffed in together, so you get ep1, ep1, then ep2, ep2 etc. See http://www.yoxi.net/aragh/doctorwho.jpg for a screenshot.

Can't confirm.
My podcasts have decided again to "not able to play on this device" again...
Soooo I am podcastless.....
Good luck.
Which podcast is it?
Stargazer and Stardate are my problem children.

Similar Messages

"Doctor Who: The Classic Series" - Corruption and Audio/Video Glitches

Has anyone else had problems with the "Dr. Who: The Classic Series"?
First off, I am unable to download "Episode 1" of "Carnival of Monsters". I have tried to download on 2 different Macs and one PC, all stop around 90 MB (error 8008).
Secondly, all 4 episodes from "The Claws of Axos" are riddled with audio pops, coupled with simultaneous video glitches. During "Episode 2", it actually throws the audio out of sync for the remainder of the episode.
I highly suspect these files are corrupt at the server side. Just checking to see if anyone else has had similar issues.

Sorry, but there's no way to know. Apple doesn't pre-announce additions (except for limited pre-orders on albums) and there aren't any alerts for specific shows except for season passes which don't really apply to the Dr. Who Classic shows where every full story is a "season".
You'll just have to keep checking back from time to time.
Regards.

Problem with Doctor Who: The Classic Series

Thank you for taking the time to look at this question.
I recently purchased "Doctor Who: Ghost Light" from iTunes, but when I downloaded it, the three episodes were placed in between the first three episodes of "Time and the Rani" on my copy of "The best of the Seventh Doctor". Is there a way that I can get the episodes of Ghost Light listed separately? I have already tried changing the artist name and the album name.
Thank you.

You need to sit with them and watch. Then check it before they leave. Apparently they're hit and run not spending a minute more than they absolutely have to. This is largely due to the flat rate fee they get for a speific type of call or part swap.
So I ask you where are the caps then if they're not put on and they were there before?
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Java Service Wrapper service is not being listed in the list of services

I wrote a sample program which uses Java Service Wrapper. But it's not being listed as a Service in the list of Windows' Services. Any ideas why?
Thanks.

Hi Amar,
need your help. i am facing the same issue.
how did you resolved it . please let us know.
Thanks,
Santosh

APS reviews not being listed

Wonder why reviews are not being listed when developers don't give all Info and people complain about shortcomings. I for one posted two reviews and they did not get posted. I have bought a lot of programs and am debating if I should continue.

Same problems here the last couple of days. Very strange behavior is occurring in my listing.
XML feed is from feedburner at: http://feeds.feedburner.com/otisandearl
I can iTunes ping this and then the two episodes appear, but after a day they went away (all but the first one.) BTW – if I’m subscribed to it I see them and they download ok.
Also after almost a week of being accepted to iTunes now, and my podcast does not show up in the proper podcast category (show name is: Otis and Earl – should be in comedy), I can search for it, and it’s there – but does not show up in the browse listing.
Help… Thanks,

The xml is not being refreshed

hello
i am trying to build an online calendar in which the user can
save his massages.
the problem i have is that once the user saved the messages
the first time, the next times he logs in the messages are not
being refreshed. meaning that the user will always see his first
messages and it does not refresh.
the way it works is that after u press save, it creates an
xml file that is loaded the next times.
if you delete the cache than the correct info appears.
i tried to research it but havent really figured out a way to
solve it. maybe its something to do with http headers i dont
know...
the calendar is on :
http://www.omrihecht.com/calendar/calendar.html
any help will be appreciated.

the code i am using to load the xml is :
prevData.onLoad = function (success : Boolean)
if (success)
loadPreviousData ();
showErrorMessage ("loading data")
} else
showErrorMessage ("welcome "+loginName.text)
myIdentifier = Math.round (Math.random () * 10000);
prevData.load (fileToLoad + "?uniq" + myIdentifier);
and on explorer it works ok, on firefox it doesnt
if you will look at it, when it finds the file it has to
load, it displays "loading data", if it doesnt find it it displays
"welcome "+username..
if you will use the following username = 123 and
password=456789 than you will be able to see the difference between
the browsers..

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
George

Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

TS3850 I am using a Sony HBR -VLU camera to import into Final Cut 10. Plugging into an I MAc that doesn't have a firewire port. The camera is not being recognized by the computer. The camera is set to play tape too. Why is camera not recognized?

I am trying to import from the camera into an I-MAC. I'm told the I-mac does not have the firewire port, but has thunderbolt. Is the only way to get video from the camera via a firewire port? Is someone giving me bad information as to the firewire port not being on the I-MAC? The camera is not being recognized. Thanks in advance.

Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

Hi Cjroyle,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo on the screen. To troubleshoot this issue I'd like you to please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4075 I tried the steps mentioned above but the changes are not being saved.

I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

Doctor Who: The Classic Series - not being listed by series!

Similar Messages

Maybe you are looking for