Documaker 12.0

It's that time of year! Time to wrap up budget planning for 2011 and I would really like to get my hands on some documentation for what will be featured in Documaker 12 so I can determine whether I should earmark funds for upgrading or not. Is anyone aware of a brochure or data sheet that outlines the changes? I understand that 12.0 is significantly different from th 11.x series.

Dear Dave S
If you are an existing customer (which it sounds like) please reach out to your sales person and they can furnish you with a document called Documaker 12 Statement of Direction. This will help you and your planning efforts.
Due to revenue recognition rules of US Capital markets Oracle is limited as to what we can disclose publicly until two weeks before GA date.
That being said, at Oracle Open World we exposed elements of the new Documaker 12 during our Documaker session. The presentation is available to Oracle OpenWorld attendees. If you did not get a chance to go to Oracle OpenWorld there are some excerpts you can find on the web such as:
http://www.oracle.com/us/corporate/press/174062
http://www.javaoracleblog.com/java/Transforming_Enterprise_Document_Automation_with_Oracle_Documaker.jsf
http://www.insurancetech.com/blog/archives/2010/09/managing_conten.html
etc etc
Let us know here if you have a problem getting your hands on an SOD and we will find a way to get one to you.
Sincerely
The Documaker Team
Edited by: Documaker Product Strategy on Oct 3, 2010 9:13 PM

Similar Messages

What is difference between Documanage and Documaker?

Guys..
We are new to ECM, one of our customer is using both Documaker(Distributed) and Documanage for their vendor document management. So just I would like to know what would be the reason to use both? Instead can they use only documaker?
Thanks in advance.
Edited by: Ram on Nov 4, 2011 1:37 AM

There is a huge level of difference - Documaker generates documents and print files based on a rules engine and document templates. Documanage does not generate any sort of documents - it is a document repository. Documaker incorporates a rudimentary transaction archive facility but it does not archive print streams or PDF documents, or anything else for that matter. This is where Documanage is quite usable.
You would probably do well to investigate some of the documentation as your question is really too broad to answer with any appreciable level of detail.
Documanage: http://download.oracle.com/docs/cd/E14904_01/E14904-01_index.html
Documaker: http://download.oracle.com/docs/cd/E17552_01/e17552_01_index.html
Edited by: Andy Little on Nov 4, 2011 11:09 AM

Is there a way to run IDS within Websphere to recieve messages through JMS, then invoke Documaker? Configuring the IDS client to use JMS within websphere seems pretty straight forward, but I cannot find information on running IDS as a server to invoke Do

Looking to move the maintenance of our IDS instances which drive Documaker MRLs from the Unix command line to within a container ( Websphere ). Using the IDS Java client with JMS is pretty easy. I cannot see how I would be able to get an IDS server running within Websphere.

IDS is not designed to run in WebSphere or any other J2EE container. It is a standalone Java application that uses native code, allows to run custom code, reads and writes files on disk, starts other processes, etc. and as such is not exactly suitable to run in J2EE. Most of such actions are not enabled (at least by default) in J2EE due to security concerns. You could run it as a service on Windows or setup to start automatically on Unix.
What exactly do you want to achieve by it being in J2EE container? Perhaps there are other ways to do the same thing?

Error while configuring oracle documaker connector.

We have configured the setting in as per the oracle documaker connector installation document.
the following actions can be performed after the configuration.
1. GENTNW32 is working fine.
2. PDF is generating.
But we are getting the following error while running the GENDAW32.
GenData
Transaction Error Report - System timestamp: Fri Mar 09 19:29:45 2012
DM17115: Warning : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
DM20401: Warning In RULNoGenTrnTransactionProc(): RunDate provided <01-OCT-2008 04:12:5820120309> is not a valid date in YYYYMMDD format. RunDate will be set to current date <20120309>.
FormMaker Data Generation (Base)
Company Name (after ini conversion): abcd-NOT FOUND
Line of Business (after ini conversion): asd-NOT FOUND
DM1002: Warning: BATCHINGBYRECIPINI
Cannot locate INI group <BatchingByRecip> with option <DefaultBatch>.
DM12041: Error : FAP library error: Transaction:<NB>, area:<..\C\genbannr.c,Dec 11 2010 08:50:55,12,0,0,10703>
code1:<0>, code2:<0>
msg:<Script: DEFLIB\AOR_PRET.DAL
Line: 6 Col: 4 Err: 6 Token: #AOR_Debug Msg: Invalid or unknown symbol>.
DM12041: Error : FAP library error: Transaction:<NB>, area:<..\C\genbannr.c,Dec 11 2010 08:50:55,12,0,0,10703>
code1:<0>, code2:<0>
msg:<Script: DEFLIB\AOR_PRET.DAL
Line: 6 Col: 4 Err: 6 Token: #AOR_Debug Msg: Invalid or unknown symbol>.
==> Warning count: 3
==> Error count: 2
End of Transaction Error Report - System timestamp: Fri Mar 09 19:29:46 2012
Elapsed Time: 1 seconds
Please check the INI file configurations:
< BATCH1 >
Printer = Printer1
EnableBatchBanner = True
EnableTransBanner = TRUE
BatchBannerBeginScript = AOR_PREB
BatchBannerEndScript = AOR_POSTB
TransBannerBeginScript = AOR_PRET
TransBannerEndScript = AOR_POSTT
< BATCH6 >
Printer = Printer2
< BatchingByRecip >
Batch_Recip_Def = true;"BATCH2";Office
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = TRUE;"BATCH6";FILE
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< Key1Table >
DOCCDEMO = Key1
< Key2Table >
LIFE = Key2
< PRINT_BATCHES >
BATCH1 = DATA\BRDPDF.BCH
BATCH6 = DATA\BSTPDF.BCH
BATCH2 = DATA\file.bch
< Printer >
EnableBatchBanner = YES
EnableTransBanner = Yes
PrtType = PDF
< Printer1 >
Port = C:\FAP\dll\testwork\DATA\BRDPDF.PDF
EnableBatchBanner = True
     EnableTransBanner = True
     AORDebug = No
     AORExt = .pdf
     AORFilesPerBatch = 1000
     AORPath = c:\AOR\
; Enable a DAL library of scripts to be pre-loaded
PrtType = PDF
< Printer2 >
Port = C:\FAP\dll\testwork\DATA\BSTPDF.PDF
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
Printer = Printer6
the error occued while running the AOR_PREB file. it does not write anything on the database.
Please lhelp us to proceed further on this issue.
thanks,
Ilayaraja

Hi Gaétan/Experts,
Thanks for the post, we are now able to successfully perform the following :-
1. Configure Documaker Connector - After changing lot of values that was provided in the Installation Guide, which seems to be outdated. For E.g. While using SQL Server Driver, the document says we need to configure the Connection as jdbc:microsoft:sqlserver, where as the code looks for the string jdbc:sqlserver.
2. Successfully insert the values to AOR table in SQL Server.
3. Sucessfully run the connector with mock-file-conn-properties, which creates the documents generated thru Oracle Documaker to the specified destination directory.
Issue:_
1. While using the UCM Destination, we are encountering an error which is pasted below.
2. In UCM we are able to create a new document and sucessfully check in using the credentials. The same used thru Connector throws an error.
3. We are using Oracle UCM - 11.1.1.5.
Error_
1828 [Thread-2] ERROR oracle.documaker.ezridc.ImportRequest processResponse - Error importing document
oracle.stellent.ridc.protocol.ServiceException: The content item was not successfully checked in. The authorization token is invalid. It has either expired or is not appropriate for the current request.
You may need to reload an earlier page in order to proceed.
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116)
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92)
     at oracle.documaker.ezridc.ImportRequest.processResponse(ImportRequest.java:200)
     at oracle.documaker.ezridc.Request.executeRequest(Request.java:68)
     at oracle.documaker.ecmconnector.ucmdestination.UCMDestination.importDocument(UCMDestination.java:141)
     at oracle.documaker.ecmconnector.connectorapi.Destination.internalImportDocument(Destination.java:156)
     at oracle.documaker.ecmconnector.connectorapi.Destination.importSingleDocument(Destination.java:138)
     at oracle.documaker.ecmconnector.connectorapi.Source.importDocuments(Source.java:169)
     at oracle.documaker.ecmconnector.engine.ImportChannel.run(ImportChannel.java:72)
     at java.lang.Thread.run(Unknown Source)
Destination Properties_
destination.administration.name=oracle.documaker.connector.destination.UCMDestinationAdministration
destination.name=oracle.documaker.ecmconnector.ucmdestination.UCMDestination
destination.ucm.connectionstring_2000=http\://10.242.196.93/idc/idcplg
destination.ucm.connectionstring_1=http\://10.242.196.93/idc/idcplg
destination.ucm.importmethod=1
destination.ucm.column.map.dRevLabel=1
destination.ucm.password=XXXXX
destination.ucm.username=XXXXX
destination.active.wait=15
destination.ucm.column.map.EXPDATE=dInDate
destination.ucm.column.map.PFILE=primaryFile
destination.ucm.column.map.TYPE=dDocType
destination.ucm.column.map.TITLE=dDocTitle
destination.ucm.column.map.AUTHOR=dDocAuthor
destination.ucm.column.map.NAME=dDocName
Any thoughts?
Thanks
Arumugam

Logical OR condition check in xpath - Documaker v 12.x

Hello,
We are looking to trigger images based on a logical OR condition between XML node values within the Xpath. This was possible using the flat file extract with offset referencing, say, Search mask (counter) - 10,31,12,(a,b). A similar change done for the Xpath reference does not seem to work. Thanks.

Hello,
If we give two manual triggers with 2 different Xpath conditions for applicable image, then documaker executes an OR condition between the conditions to trigger the image.
Thanks.

Logical OR with XPaths in Documaker 12.1

Is there a way we could provide a logical OR condition within Xpath Getdata DAL?
In the below case, we would need to retrieve the FormNumber value for SortOrder 18 or 19.
FormNumber= GetData( "!/Request/XmlTransaction/Quote/Product/Location/Form[PrintIn='Y'][SortOrder=18]/FormNumber 1,255");

Hi,
If it is Linux or Solaris the Word attachment to the document should work out-of-the-box with configuration. For AIX the Oracle Outside In Image Export runtime component that converts the documents for most document types (except for specific types of TIFF) needs a X11 DISPLAY context with user authorization for which to run the rule in because that what it uses to do the conversion to an image.
Is this AIX you are trying to do this on? If so the ODEE installer for 12.1.x sets a DISPLAY variable in the docfactory.sh startup script in a section for that platform that you would have use to point to a X11 Motif or Lesstif DISPLAY (e.g. my.server.com:2) that has a running X11 server. VNC server option will work also so that the system can remain headless.
I thought that the Oracle Documaker Enterprise Edition document covers this requirement under its attachments notes, not sure.
See documentation on Oracle Outside In Image Export for supported documents it can handle and platforms.
I am not sure if the version Oracle Documaker uses but here is a document reference for v8.3.5 for the Unix particulars, http://docs.oracle.com/cd/E14154_01/dev.835/e12885/c03_unix.htm .
SCCOPT_RENDERING_PREFER_OIT settings referenced in the above document is only option on Solaris SPARC and Linux x86_32 platforms according to the Oracle Outside In Image Export Developer's Guide for v8.3.5 (http://docs.oracle.com/cd/E14154_01/dev.835/e12885.pdf).
Regards,
-Steve

Documaker 12.4 dofactory not able to connect to Assembler queue

Hi There,
I am trying to setup Documaker Factory, using Weblogic as presentation tier.
When starting Factory supervisor Service, the Service stuck up in Queue.
The Error message getting fron config Startup is as follows;
2015-04-17 14:43:58,258- INFO-[Supervisor-oracle.documaker.processmonitor.ProcessMonitor]: Testing : Database connection
2015-04-17 14:43:58,274- INFO-[Supervisor-oracle.documaker.processmonitor.ProcessMonitor]: Database Connected.
2015-04-17 14:43:58,274- INFO-[Supervisor-oracle.documaker.processmonitor.ProcessMonitor]: Testing : JMS Queues.
2015-04-17 14:43:59,102-ERROR-[Supervisor-oracle.documaker.processmonitor.ProcessMonitor]: Problem while creating queue jms.al1.assemblerreq
2015-04-17 14:43:59,118-ERROR-[Supervisor-oracle.documaker.processmonitor.ProcessMonitor]: javax.naming.NameNotFoundException: While trying to lookup 'jms.al1.assemblerreq' didn't find subcontext 'jms'. Resolved '' [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jms.al1.assemblerreq' didn't find subcontext 'jms'. Resolved '']; remaining name 'jms/al1/assemblerreq'
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1034_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:423)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at javax.naming.InitialContext.lookup(Unknown Source)
at oracle.documaker.processmonitor.DBQueueTest.StartupDBQueueTest.checkQueue(StartupDBQueueTest.java:151)
at oracle.documaker.processmonitor.DBQueueTest.StartupDBQueueTest.testQueue(StartupDBQueueTest.java:130)
at oracle.documaker.processmonitor.ProcessMonitor.main(ProcessMonitor.java:766)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.documaker.process.Startup.main(Startup.java:210)
Caused by: javax.naming.NameNotFoundException: While trying to lookup 'jms.al1.assemblerreq' didn't find subcontext 'jms'. Resolved ''
Any hep or suggestion would be appreciated.
thanks,
-r

The Assembler queue is the first queue that is accessed when Factory starts. From the error message it looks like the server to which you are configured isn't available in the JNDI lookup. A few things you can do to verify:
1) Verify that the JMS server is running - check your WebLogic console (https://<servername>:7002/console) - 7002 is the default port, if you modified this then use the appropriate port. Login with your weblogic credential and navigate to Services->Messages->JMS Servers and ensure the AL1Server is OK.
2) Verify that the queues are configured with the appropriate JNDI name. In the WebLogic console, navigate to Services->Messaging->JMS Modules->AL1Server and look at the Assembler queue's JNDI name.
3) Verify that DocFactory is configured with the same JNDI name. Open Documaker Administrator, expand System 1 and select Assembly Line 1, click Configure. Expand QUEUES_CFG and select Bus. See the Assembler's queue name.
The likely culprit is that your JMS server is either not running, or not reachable from the DocFactory server. Also check to make sure you have no firewalls or port blocks on the requisite ports in your system.
-A

Documaker 11.5 in Window 7 - 64 bit machine

Hi Experts,
We are trying to install Documaker 11.5 in Window 7 - 64 bit machine. The installation is successful, however we aren't able to invoke Documaker Studio. It just gives the below error message:
"The application has failed to start because its side-by-side configuration is incorrect".
Has any one come across or any suggestions on solving this issue?
Thank you.

Hi,
Could be you are missing the installation pre-reqs, the MSVC++ 2008 redistributable installation in particular.
Documaker Installation Guide: http://docs.oracle.com/cd/E16256_01/install_book.pdf, page 120, section "Installing The System", subsection "Before you begin"
Regards,
-Steve

Documaker Add-in for microsoft word

Hey guys where can i download documaker add-in for MS-WORD 2007

https://edelivery.oracle.com/
After you enter your name, company, email, etc.
Select "Oracle Insurance Applications"; "Microsoft Windows (32-bit)"
Click Go
Select Oracle Documaker Standard or Enterprise Edition Download
Download "Oracle Documaker v12.0 P0 for Microsoft Windows (32-bit)" which is part # V24186-01
Follow the installation instructions located on OTN at http://www.oracle.com/technetwork/documentation/insurance-097481.html
Under "Oracle Documaker Documentation Libraries" select "Oracle Documaker Online Documentation Library – Manuals – Release 12.0" which is part number E17552-01 and click View Library (or download it all if you want).
Under "Oracle Documaker Standard Edition - Installation Guides" select the "Documaker Installation Guide" for installation instructions. Refer to Chapter 4 for Windows installation.
Please note that this is the 12.0 version of the Add-In and Documents created with it should be imported into the library using the 12.0 version of Studio.
There are tutorials available on OTN as well under "Oracle Documaker Docmentation Libraries" under "Oracle Documaker Online Documentation Library - Tutorials - Release 11.5"; which is part #E20774-01. These have not been updated with the latest 12.0 changes, but user interface is very similar in most areas and they may prove useful to a new user.
-DA

Can we create .CSV files through documaker

Hi,
Is it possible to create .csv files through documaker apart from pdf's
Thanks

With apologies, it is still unclear (to me) what you are asking.
It is possible to create files using DAL, but to offer more specific guidance requires a better understanding of what it is that you want.
A CSV is a Comma-Separate Value file. A PDF file is a printed document file containing formatted text content, graphics, lines, boxes, etc - in other words a fully-composed document. I'm not exactly sure how a PDF and a CSV file could contain the same data.
Are you perhaps asking to get an index of the created PDF files written as a CSV file? Something that contains a row of key transaction data along with the file name of the generated PDF? Perhaps something akin to the batch (BCH) files that can be produced per transaction recipient?
Are you asking for an export file of all the field data that went into the creation of the document and included in the PDF? Normally a CSV has a header that describes the columns and then each row of data would be consistent with that header. Without knowing that every PDF file you create will have exactly the same number of fields defined, it is difficult to imagine that a single CSV file would be sufficient. And depending upon the number of fields and the size of the data assigned to each, this could be quite a long record per PDF in the resulting CSV file.
Or perhaps you had in mind to get a name / value pair written for each field with data written on separate lines? This would not a be a true CSV file, but could have the name and values separated by commas if that is what you require.
You have something specific in mind and yet, we are not in your mind. We need more specific information on exactly what you are trying to accomplish.

Read rtf contents from xml file and print them in pdf using documaker

I am using Documaker 11.2.
Input file is XML and for a particular tag, rtf contents is passed like
{\rtf1\ansi\ansicpg1252\deff0\deflang1033\deflangfe1033{\fonttbl{\f0\fswiss\fprq2\fcharset0 Arial Narrow;}} \viewkind4\uc1\pard\b\f0\fs20 My\b0 name is Schoo.....
I want to read this data excluding the RTF abstract and print the text alone in pdf along with format like paragraph,bold....
The output file generated is PDF.
Kindly let me know how can i achieve this in Documaker.

There is no direct support for importing RTF from an XML extract. Perhaps feature 1514 "Mapping formatted XML data into multiline field" will be of some use. This was released in 11.0, I believe.
Essentially you can establish paragraph and certain text formatting like bold and underline when you include the proper token information in the data. I believe this is similar to simple HTML tokens.
Example: <FIELD><P>First paragraph of data.</P><P>New paragraph with <B><U>bold and underline text</U></B>. Rest of paragraph normal.</P></FIELD>
The result is something like this:
<P>First paragraph of data.</P><P>New paragraph with <B><U>bold and underline text</U></B>. Rest of paragraph normal.</P>

Ondemand Script is failing in oracle documaker 12.2

We just upgraded from oracle documaker 11.3 to 12.2. When we try to generate AFP file, ondemand script is failing in 12.2. It is failing in Gen print.
GenPrint
Transaction Error Report - System timestamp: fri sep 26 09:24:12 2014
DM17115: Warning : The DownLoadFAP INI option is set to YES, this option should be set to NO for optimal performance. Check the RunMode control group, DownLoadFAP option.
DM17065: Warning in GENGetRecipientSet(): AGENT batch is empty, Unable to RCBGetFirstRcpSetRec(NULL).
DM17065: Warning in GENGetRecipientSet(): ERROR batch is empty, Unable to RCBGetFirstRcpSetRec(NULL).
DM12041: Error : FAP library error: Transaction:<>, area:<..\C\rulcomnt.c,Aug 8 2013 19:10:48,12,2,0,21451>
          code1:<0>, code2:<0>
          message:<Script: DEFLIB\LOADONDEMAND.DAL
Line: 10 Col: 642 Err: 65535 Token: ) Msg: Unknown>.
ULL).
DM12041: Error : FAP library error: Transaction:<>, area:<..\C\rulcomnt.c,Aug 8 2013 19:10:48,12,2,0,21451>
          code1:<0>, code2:<0>
          message:<Script: DEFLIB\LOADONDEMAND.DAL
Line: 10 Col: 642 Err: 65535 Token: ) Msg: Unknown>.
==> Warning count:    6
==> Error    count:    2
End of Transaction Error Report - System timestamp: fri sep 26 09:24:13 2014
Elapsed Time: 1 seconds

This appears to be telling you that there is a DAL script error. There's probably some syntax error not previously detected in the script that is now being reported. The script execution is not able to tell whether LOADONDEMAND is really the name of a script or a routine found within a script library, but that is where the error is located.
Perhaps you can bring that script up in DMStudio and do a syntax check from the menu/ribbon. That might help you recognize what needs to be corrected.
Line 10, column 642 would mean that it is a really long line! Might mean there is just a paren out of place or not enough to satisfy the syntax.

Securing and protecting PDFs produced from Oracle Documaker

Hi Experts,
Is there anyway to secure and edit/ password protect PDFs produced from Oracle Documaker? This will enable us to protect editing, copying of content from the PDF.
Thanks

Yes.
See Chapter 4 pages 63 through 79.
http://download.oracle.com/docs/cd/E16256_01/pdf_book.pdf
This is 11.5 documentation; what version are you using?
-DA

Web Service call from Documaker Server?

Hi folks,
We have a process where we'd like to create a document, and import (via AddMultiPageBitmap rule) an existing external document to send with the newly-created document. This external document is stored in FileNet. We could use a Java application to read our input file, call an Webservice utility to retreive the necessary documents and put them onto the server that we'd run the Documaker engines (GenData/GenPrint) on, where they could then find and import them from. However, rather than develope a new java application to do that, we're wondering whether we can call this webservice utility from within Documaker to retreive the documents from FileNet, and either do so within the AddMultiPageBitmap rule (eliminating the need to actually place the document on the server by just returning the bitstream to the Rule in lieu of telling it the file location), or whether we can at least do so prior to the AddMultiPageBitmap rule and put each document onto the server just before calling the AddMultiPageBitmap rule.
So basically, Is it possible to do a Webservice call from GenData when running in batch on Linux? We're currently running 11.5.
Thanks,
Gregg

Gendata does support custom code, so you could, in theory, write a custom rule that calls a WEB service and writes the TIFF(any supported bitmap) to disk. After this the base Add..Bitmap rule can just pick it up and work as usual.

SH file error after Documaker 12.2 to 12.3 upgrade

Hi all,
We have a unix batch file that uses the gen files to generate PDF. After we upgraded to 12.3, we encountered the error:
GenData
Transaction Error Report - System timestamp: thu nov 27 11:09:39 2014
DM12041: Error : FAP library error: Transaction:<>, area:<JFNLIB>
          code1:<0>, code2:<0>
          message:<Unable to find the Java runtime for JFNLIB.>.
DM12041: Error : FAP library error: Transaction:<>, area:<JFNLIB>
          code1:<0>, code2:<0>
          message:<Error loading JNILib!
Unable to find the Java runtime for JFNLIB.
>.
DM13025: Warning in RCBSendToErrBatch(): The transaction is being assigned to the error batch.
==> Warning count:    1
==> Error    count:    2
End of Transaction Error Report - System timestamp: thu nov 27 11:09:39 2014
Elapsed Time: 0 seconds
GenPrint
Transaction Error Report - System timestamp: thu nov 27 11:09:39 2014
DM17115: Warning : The DownLoadFAP INI option is set to YES, this option should be set to NO for optimal performance. Check the RunMode control group, DownLoadFAP option.
DM17065: Warning in GENGetRecipientSet(): Batch1 batch is empty, Unable to RCBGetFirstRcpSetRec(NULL).
DM17065: Warning in GENGetRecipientSet(): Batch2 batch is empty, Unable to RCBGetFirstRcpSetRec(NULL).
DM17065: Warning in GENGetRecipientSet(): DEFAULT batch is empty, Unable to RCBGetFirstRcpSetRec(NULL).
==> Warning count:    4
==> Error    count:    0
End of Transaction Error Report - System timestamp: thu nov 27 11:09:39 2014
Elapsed Time: 0 seconds
The sh file goes like:
export myextract=/scratch/loc/app/c/project_workspace_db/input/polska.xml
export PATH=/scratch/loc/app/documaker123/fap/bin:$PATH
export PATH=/scratch/loc/app/documaker123/fap/bin/lib:$PATH
export LIBPATH=$LIBPATH:$loc_HOME/lib:$JAVA_HOME/lib:/scratch/loc/app/documaker123/fap/bin/lib:$LIBPATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$loc_HOME:$loc_HOME/lib:$JAVA_HOME/lib:/scratch/loc/app/documaker123/fap/bin/lib/jfnlib.jar:/scratch/loc/app/documaker123/fap/bin
export CLASSPATH=$LD_LIBRARY_PATH:$CLASSPATH
cd /scratch/loc/app/documaker123/fap/bin
ldd gendata
#gendata /ini=/opt/loc/documaker_beta/docstudio/fsiuserat.ini
gendata /ini=/scratch/loc/app/c/project_workspace_db/fsiuser.ini
genprint /ini=/scratch/loc/app/c/project_workspace_db/fsiuser.ini
rm /scratch/loc/app/c/project_workspace_db/print/*noname*
jfnlib.jar is correctly placed in the lib folder. Any help would be welcome.
We are running Documaker Studio 12.3. Thanks!

Your custom wrapper shell script does not have a path for all the JRE primary JVM shared object (libjvm.so) and also all supporting shared objects needed to load the JRE. It is not clear what UNIX flavor this is because you have mix of library path environment variables from different OSs, e.g. LIBPATH is for AIX but LD_LIBRARY_PATH is for Linux and Solaris.
You need multiple entries to the appropriate platform directories of the 32-bit JRE so that all the supporting shared objects are in the library path.
Example:
For AIX it should include the JRE 32-bit subdirectories:
     $JRE_HOME/lib/ppc/classic:$JRE_HOME/lib:.$JRE_HOME/lib/ppc
For Linux x86 it should include the JRE 32-bit subdirectories:
     $JRE_HOME/lib/i386/server:$JRE_HOME/lib:$JRE_HOME/lib/i386/server
For Solaris (SPARC) it should include the JRE 32-bit subdirectories:
     $JRE_HOME/lib/sparc/server:$JRE_HOME/lib:$JRE_HOME/lib/sparc
Hope this helps,
-Steve

Documaker : how to change text by count during overflow

Hi Experts,
Please help me...
I want to change a text in a section by overflow count.
Summary that I have set are as follows.
1. FormA (contains Subform1)
2. Subform1 (contains Subform2)
3. Subform2
Subform1 on FormA is setting the overflow with the trigger by the XML.
Search Mask (counter) : !/xxx/data/Repeats/Repeat
Subform2 on Subform1 is setting that always repeat 3 times.
Reference :
Documaker : How to set the overflow repeated 3 times always.
I created DAL scripts as follows.
1) To setgvm CTR.
---> Section_HEADER on Subform1 has a field that setting this script.
2) To return GVM(CTR).
---> Section_TEXT on Subform2 has a field that setting this script.
3) To increment GVM(CTR) by 1.
---> Section_TEXT on Subform2 has a field that setting this script.
This counter has been running without any problems.
I tried to set as follows.
4) To change text by GVM(CTR)-1.
if havegvm('ctr',1)
varctr = gvm('ctr',1)
if varctr-1 = 1
return("A")
else if varctr-1 = 2
return("B")
else
return("C")
end
else
return("")
end
---> I placed a field (call this "OUTPUT_TEXT") that is set this script in Section_TEXT on Subform2.
This setting is working.
BUT, I want to output the Double-byte characters at OUTPUT_TEXT field.
I can not input the Double-byte characters in DAL Script. (If I input, DMStudio was shut down...)
By placing 3 text areas in Section_TEXT, I thought of setting the trigger switch by count of overflow, but I could not set.
By count of overflow, is there any other ways to solve this problem?
Thanks,

Sorry, I resolved this...
I created 3 triggers and set it for 3 text area.
A trigger is as follows for *1* text area.
if havegvm('ctr',1)
varctr = gvm('ctr',1)
if varctr = *1*
return(1)
end
else
return(1)
end
return(0)
And, I moved the increasing count field to most right position in Section_TEXT.
+3) To increment GVM(CTR) by 1.+
---> Section_TEXT on Subform2 has a field that setting this script.
It is able to switch text areas by count.
Thanks,

Documaker 12.0

Similar Messages

Maybe you are looking for