Document 60000030482 cannot be reversed due to clearing reset

Hello Freinds,
Has anybody faced this error during FP09. Document 60000030482 cannot be reversed due to clearing reset
There are some documents which are stuck in clarification list. Please can anyone help me to rectify this error.
Regards,
Charvi

Hello Christiane
Thanks a lot  for your reply. yes even i read that error log. It says
"Instead of posting a reversal of the reversal, you have to recreate theoriginal clearing, that is, post a new equivalent for the original
clearing document."
Does this mean that i need to post a new payment document or try to
adjust with the old document.But if i have to do how will i be ableto
achieve this as the old document is alrady reset and a new document has
been posted which is not a payment document.
This error we have faced for the first time. Please guide us how to
achieve this so that in future we can handle these cases.
Regards,
Charvi

Similar Messages

  • FBRA - Clearing cannot be reversed (contract number)  Message no. F5538

    Dear
    In T.code F-51-- transfer posting with clearing-- user has posted the document by giving posting key 27 and vendor code, amount  and later in line item 2 by giving posting key 39, vendor code spl gl indicator (for further security deposit), amount and profit center and by mistake filled contract number and contract type.
    In t.code F-51, since in line item 002 the fields contract number and contract type are filled by mistake the same could not be removed even in FB02 as they are greyed out. 
    Later the above spl gl credit was paid by t.code F-53 by selecting the above open item, process open item, and cheque is not yet issued.  Now he would like to reverse the document.
    Now  when the same is tried in t.code FBRA the following error is coming.
    "Clearing cannot be reversed (contract number)  Message no. F5538"
    If contract number and contract type are not filled there is no error at all and the document can be reset and cleared. 
    We are in ECC 6.00.  I just verified the note number 31547 but it is issued on 29.07.1998.  Our basis team also said the same thing.
    Your valuable inputs are highly solicited. 
    Regds

    Dear
    F-53 document has got a clearing document.  Hence I cannot directly use F-08 here.  So I have to use FBRA only
    Requirement is :
    Delete the contents at the line item level in the field labels Contract Number and Contract Type viz., BSEG-VERTN, BSEG-VERTT  fields. (ex., in T.Code F-51 --in posting key 39 contract number and contract type are filled by mistake by user and they need to be deleted after posting the document) 
    The above fields have been included in SPRO>Financial Accounting (New)>Financial Accounting Global Settings (New)>Document>Rules for Changing Docuements-->Document Change rules, Line item after posting the document.
    But even then I could not delete the contents in the above fields in FB02
    Please throw some light as to where I am missing still ?
    Regds
    Through coding the relevant fields were deleted as per reply received from sap. 
    Edited by: aravindpc on Jan 14, 2011 4:47 PM
    Edited by: aravindpc on May 14, 2011 12:18 PM
    Edited by: aravindpc on May 14, 2011 12:21 PM

  • Document with origin R4 cannot be reversed -error msg EB049

    We have an invoice with 2 posting relevant items, the energy charge and a renewable energy credit.  the latter was generated as zero (valid condition) and posted as a Cr transaction. 
    this is the only instance of this scenario as normally the zero amounts post as Db rather than Cr.  we upgraded a week ago to SAPK-60308INISUT, could this have caused a change in the main/sub used for posting these zero amounts?
    The DFKKOP line item for the zero amount has cleared against itself, and now clearing reset cannot be performed.
    error generated is Document XXXXXXXXX with origin R4 cannot be reversed, message number EB049.
    The invoice needs to be reversed as its based on an estimated reading that needs changing, and the invoice won't reverse because of the clearing reset issue.
    I've researched the error number and can see a few related notes but they were all fixed some time ago and were different scenarios - move-outs and statistical BPP, neither applies in this case.
    Please can anyone provide help as to how the clearing can be reset so the invoice can be reversed.
    Many Thanks
    Astrid

    Hi David
    EA13 is configured to allow for clearing reset of both fully cleared and partially cleared invoices, and we have numerous cleared invoices that get reversed every day, but this is the first time we've seen this error.
    I think the underlying issue is that the zero amount transaction is getting posted as a credit rather than a debit.  We've been able to set up the situation in a system that still has the old code, and there it posts as a debit, clears against itself, and can be reversed.
    In the QA region which is at the same new version as production, it posts as a self cleared Cr transaction and again can't be reversed.
    Besides getting  a fix to get make the zero amounts post as debits again, we also need to find a way to reverse the bad invoice in production.
    Thanks

  • ERROR: Clearing cannot be reversed (contract number)

    Dear Experts,
    When i go to t.code FBRA and want to reset the doc clearing. The error appear with Message no. F5538 Clearing cannot be reversed (contract number).
    This is the Diagnosis
    It is not possible to terminate clearing because a contract number was posted in the line item 002 of the document 1500000088 3500 2011.
    Please anyone, who can answer this case.

    Hello Vivek,
    Thank you for your information. It's very helpful for me.
    On this sap notes, it said 2 program RFVD_CHK_REMOVE_CLEARING or
    RFVD_CHK_CHANGE_CLEARING.
    You can use program RFVD_CHK_REMOVE_CLEARING for customer, but for vendor you can use RFVD_CHK_CHANGE_CLEARING.
    CHANGE CLEARING only break the link between two document and open one side only.
    You need to run the program once more for clearing document, so both of them will open again.
    If you don run for the second once, the clearing document still closed.
    After that you can use t.code FB08 to reverse that document.
    Hope this will help the others one.

  • Document balance cannot be distributed when settlement is reversed via CJ88

    Dear Experts,
    When i do settlement reverse via CJ88, i got the below mentioned error.
    "Document balance cannot be distributed when settlement is reversed"
    My current system has implemented already the below notes
    "Note 891709 - Settlement reversal to fixed asset: Error msgs AW751, AW753" but the satus of implementation is " Cannot be implemented" which the SAP Note does not contain any correction instructions that you can implement in your system. No action is required.
    other SAP note related to this error is Note 190402 - Settlement to an asset: AW751, AW753 with reversal which is for the SAP system up to 4.6C version.
    My current system is ECC 6.0.
    Can any one give me a hint what could be the cause for this error other than above mentioned?
    Regards
    vetrivelan

    Hi Vetrivelan,
    The solution lies in note 891709 itself. May be you have missed the correction part given in the note. This note has  two correction options for separate versions. Check it once again.
    Also check the prerequisite as stated in the note. It can guide you about the relevence of this note to your system.
    Regards

  • SD invoice can't be reversed due to foreign currency valuation

    Hi,
    I have an invoice which relates to an Sales order,it was posted in several months again(cross monthly closing). Now I want to reverse this invoice,but the system can't cancel the relevant FI document due to we have done the foreign currency evaluation at last month end.
    The error message as:
    ===========================================================================
    Reversal of document 0220v1 1100004518v2 2009v3 not possible in FI
    Message no. F5A005
    Diagnosis
    Item &v4 in accounting document 0220  1100004518 2009
    was valuated with an open item foreign currency valuation.
    System Response
    Document cannot be reversed.
    ===========================================================================
    How can I accomplish this job?
    Any input is appreciated.
    Thanks,
    Don

    Hi Mike,
    Reset the Foreign currency valuation run? I am not sure about your suggestion. Does it means that I just key in the "reversal posting date" and "reverse post.peried" and don't key in "Document date","Posting date" and "Posting period",it is right?  And then how to check the document being reset or not? (Just check if there have the document or not,when test run.)
    Or I need to select a reset valuation method?
    Thanks,
    Don

  • BlackBerry Z10 Error "The file cannot be played due to an unexpected error (10)"

    Hope someone can help this one, I received a voice note through BlackBerry Messenger, after downloading I tried to play it and the following message popped up, "The file cannot be played due to an unexpected error (10)".
    I received another file, 3GP format, tried to play it, same error pops up. I headed over to the music and video libraries, I could not see these 2 files. I connect my Z10 to the notebook and checked on my SD Card, I could see the files from were not named correctly e.g. VID 00001-20101226-1206 was named as VID 00001%20101226-1206 with the percentage symbol being the unusual thing I picked up. This was the case for both files.
    I then modified/remaned the files replacing the % with a - (dash) symbol. The files were now visible and able to play through the Z10. I think there is a problem with the way BBM files are being saved especially the naming convention might be having an error/bug.
    My OS release is 10.0.10.99, Version 10.0.10.738 with Build 455718. Is there a fix for this problem that is known? I checked but saw no posts where it was clearly addressed. Am I the only one experiencing this anomaly?
    I have restarted the device but this does not resolve. I have attached a screenshot of the error sequence also showing how the file is named upon saving to my media library.
    Attachments:
    Z10 Error.png ‏287 KB

    Hey runyamhere,
    Thanks for bringing this to our attention.
    To find the root cause of this issue regarding the media not saving the file properly, we will need to gather logs from the BlackBerry Z10.
    I would highly suggest you contact your network service provider and ask to be transferred to BlackBerry so we can get a case number created so we can get the logs.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Reg: how to reverse the partial cleared items

    Hi Gurus
    1) how to reverse the partial cleared items
    and
    user posted wrogly below:
    2) actually amount received against invoice but she posted in f-02 insted of f-28 so how to reverse this

    Hi,
    I think you should do the following:
    1. T.code - FBRA - to reset the cleared document.
    2. T.code - FB08 - to do the reversal after resetting.
    See if it helps.
    Regards,
    SGP

  • Erro"Transaction cannot be posted due to errors in price determination"MIGO

    Hi All,
    I am facing error message "Transaction cannot be posted due to errors in price determination" for "X-field conversion" while posting GR document against Scheduling agreement.
    I have checked the Validity periods of conditions maintained in Scheduling agreement and it was within validity.
    In Material master - Price Control - V (Moving average price/periodic unit price)
    Standard price              0.00 
    Per. unit price             1.58 
    Price unit             1         
    Please help me to resolve this issue.
    Cheers!
    Sujay Chinchole

    your material master displaying Zero price .maintain the price in material master.and also check why material has Zero price.
    what is the price  in  material moving average field
    Edited by: Sridhar Jayavarapu on Mar 13, 2009 7:17 AM

  • Reverse FI Invoice & Clear

    Hi,
    Need to have FI reverse invoice and also have it cleared.  The goods have not been delivered to the customer.
    I need to have the invoice cleared, canceled, reverse the goods issue, cancel the delivery, and close the sales order? 
    Do i use FB08 to reverse the document, but would this clear the document at the same time? But how do undo the rest of the items? Is there a one step process or several steps? Can someone please explain this to me.
    Thanks
    Noopers

    I don't think reversing FI invoice directly using FB08 is the right option, as it is a follow-on document.  First, cancel/reverse delivery (PGI) using VL09 and then cancel the billing document using VF11 (which would trigger an FI document automatically).

  • Tcode: MR8M---Logistic invoice verification'document can't be reversed

    Dear Experts.
    I have a logistic invoiceverification' document and use tcode:MR8M to reverse it ,but can't be reverseed ,the system issue the wrong information :"No reversal possible. Reverse value must be reset".please tell me how  I  should do? thanks!
    Fanny.

    Hello Fanny Chen,
    In certain situations, the reversal of posting documents may be cancelled with an error. This may, for example, occur in the following situations:
    The specified posting date is in a posting period that is already closed.
    At the time of the reversal, the posting of the original document had not been completed.
    Account assignment objects (for example, cost centers) which were posted to in the original document are closed at the time of the reversal.
    Posting items that were created by the original document are already cleared at the time of the reversal (for example to customer and vendor accounts).
    In your case it seems that the posting items that were created by original document are already cleared so you need to first reverse the cleared document which the system is trying to mean by saying"No reversal possible, reverse value must be reset.
    UNDER THESE CIRCUMSATNCE PROBABLY YOU NEED TO USE THE  TRANSACTION FOR WHICH ALL CLEARED DOCUMENT CAN BE RESET AND REVERSE
    1)     TCODE  :   FBRA
    2)     CLEARING DOCUMENT  :  ENTER THE CLEARED DOCUMENT NUMBER
    3)     COMPANY CODE  :  ENTER COMPANY CODE
    4)     FISCAL YEAR  :  RELEVANT FISCAL YEAR
    5)     CLICK THE SAVE BUTTON
    6)     IN THE NEXT SCREEN CLICK YES
    7)     THE SYSTEM WILL GIVE ANOTHER MESSAGE BOX WITH THREE OPTIONS : 
    ONLY RESETTING
    RESETTING & REVERSE CLICK ON THIS
    CANCEL
    8)     SELECT THE MIDDLE ONE I.E. RESTTING & REVERSE
    9)     THE SYSTEM WILL  ASK FOR REVERSAL REASON.
    10)     ENTER 01 AND THEN PRESS ENTER
    11)     THE SYSTEM WILL RESET THE DOCUMENT
    After this resetting is done you can use MR8M Tcode.
    Hope I had been able to help you. Please assign points and close the thread.
    Rgds
    \Manish

  • Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

    Hi, 
    I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
    If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
    Script: 
    $laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
    foreach ($laptop in $laptops)
        Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
        Enter-PSSession $laptop
        $version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
        if ($version -ne "135.0.2071.1047")
            Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
        else
            Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
        Exit-PSSession
    Error message:
    Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
    At line:2 char:1
    + Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Start-Process], InvalidOperationException
        + FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
    Thanks, 
    Dimitri

    Hi,
    Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
    http://ss64.com/ps/invoke-command.html
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Error: Service process cannot be confirmed due to its status

    Hi Experts,
    we want to create a Service Notification (BUS2000117) as a follow-up document of a service order (BUS2000116). The problem is that we receive the following error:
    Service process cannot be confirmed due to its status
    *Diagnosis*
    You cannot enter a confirmation for the service process due to its status.
    *System Response*
    To enable you to enter a confirmation for a service process, it must be released and may not yet have the status Closed .
    *Procedure*
    Check the service process status and if necessary, change it.
    How can i shut off the control of the status as we need to create service confirmation of service orders which are still in process. Is there any customizing?
    Best Regards
    Oliver

    To solve the problem without using the note it is possible to change customizing.
    Customer Relationship Management -> Transactions -> Status Management -> Define Status Profile for User Status:
    In Transaction Control is has to be assigned the Business Transaction 'To be distributed' to the relevant status.
    Afterwards the service notification can be created without problems.

  • Error: Transaction cannot be posted due to errors in price determination

    Hi,
    I am facing below error when i try to post GR for a SA. I checked out all the configurations, these worked on GR for PO but not on SA.
    I have seen other posts which recommend to view OSS note 447374 and 446831. I am not sure where to find these and how to use these notes.
    Please help!.
    Thanks
    Ramya

    Here you go
    Transaction cannot be posted due to errors in price determination
    Message no. ME573
    Diagnosis
    The error marked with 'X' occurred during the price determination process for purchasing document 201 00010:
    [ ] Net price is 0.
    [ ] Net price is negative.
    and/or there are no valid conditions or the duration of the
    contract has ended.
    [ ] Effective value is negative.
    [X] Mandatory condition missing.
    [ ] Negative delivery costs.
    [ ] Delivery costs have been recorded although invoice
    receipts are not defined for the item.
    [ ] Error during quantity conversion
    [ ] Error during currency translation
    [ ] Field overflow
    [ ] A condition involving delivery costs exists without a
    transaction/event key.
    [ ]Error during maint. of delivery costs in master conditions
                  Delivery cost conditions in different validity  periodsnot identical
    System Response
    The transaction cannot be posted without successful price determination.
    Procedure
    Check the purchasing document and the associated conditions:
    Display purchase order
    Display scheduling agreement
    If the problem cannot be resolved in this way, contact your system administrator.
    The latter can check the Customizing settings for price determination in Purchasing under Conditions -> Define Price Determination Process
    When the foregoing steps have been carried out, try posting the transaction again.

  • Document Rows cannot be closed concurrently with the other modifications

    Dear all,
    We are trying to clear a small backlog of open Sales Orders in SAP. There are few rows in the Sales Orders which have remained open because of undelivered quantities. We are trying to close these rows. In most cases, the complete sales order is not to be closed.
    However I am getting the following error when i close one row and click on update.
    "Document Rows cannot be closed concurrently with the other modifications you have made."
    We are running on SAP B1 2007 PL 11. Some of these sales order are old and were made while we were running on the older version.
    Kindly let me know how i can clear these backlogs and have a match between my actual open sales orders and those open in SAP.

    Dear All,
    It is a problem if we cannot close the rows because
    1. Sometimes it so happens that all the items are not sent to the client on account of rejection. For example if the order was for 1000 nos., we have shipped him 980. the row is still open for 20 nos. we cannot close the row.
    2. This causes a problem in the inventory data as well, since it appears in the committed for that item.
    Could you suggest some way of closing rows of sales orders without closing the whole sales order for partial shipment?

Maybe you are looking for