Document always opens in Preview mode, prefer Normal mode

Documents always open in Preview mode, while I'd prefer the Normal mode. I tried setting the mode to Normal and saving the document, but next time I open it it again opens up in Preview mode. Can I change this somewhere so it defaults to Normal mode?
Thanks for your help or suggestions.

The preview that was used when the file was saved is saved with the
file. If you save it in preview mode, it will open that way.
If that's not the case, you may have a slight corruption in your
preferences. Try trashing them if this bothers you.
Bob

Similar Messages

Why does closed documents always open up again when I use the program

Why is it that recently opened documents always opens up whenever I reopen the program to access other files? The previous opened file will always reopen again automatically whenever I access the program to open other files. This has happened after I upgraged to 10.7 and, so far, occurs in Preview and Pages. I've not used other applications so I don't know if it happens with those as well, i.e., Numbers, etc. Any help with debugging this would be appreciated.

Mate - it's not a bug... it's a feature called Resume.
In essence, if you don't close a window before you quit the program, you will get that window back again when you next open the program.
You can change this behaviour in System Preferences. Click on General and untick "Restore windows when quitting and re-opening apps".

Differentiation between ADF Di disconnected mode and normal mode

Hi,
While opening the Di Excel, I need to differentiate whether excel is opened from disconnected mode or normal mode from the UI.
When opened from normal mode, I have to execute some method actions and while opening from disconnected mode I have to skip executing some method actions.
Any updates could be of great help.
Thanks in Advance,
Vinod Tummuri

Hi Vinod,
There is no way to determine if the excel is opened in connected mode / disconnected mode.
If you've saved the workbook locally, then opening it from the local file system is disconnected mode. However, when you perform some operation (server side - say executing a method , performing download on the table etc), will initiate a request to the server, which will then work as online.
-Arun

Pages Documents Always Open with Microsoft Word???

I have two word processing applications installed on my computer:
Microsoft Word (12.24)
Pages (4.04)
For whatever reason, documents in .pages always want to open using Microsoft Word.
I have tried everything to change this, including Get Info> Open With > Pages > Change All. At first this appears to work, displaying a (default) after pages in the drop-down box. However, when I next attempt to open the document, the document automatically opens in Microsoft Word. When I again check get info, Pages still has the (default) setting, but Microsoft Word is selected in the open with.
I can change individual documents to open with .pages (by selecting pages in the dropdown box), but this only works with the single document and is thus extremely impractical.
Can you think of how to solve this problem?

That is a (drop down) menu.
Try *Repair Disk Permissions* with *Disk Utility* and rebooting.
Something has appeared to been hashed.
Have you by any chance moved the Pages appliaction from out of the iWork folder in the Applications folder?
Also have you updated Pages to the latest version and updated your system using the Combo (downloaded) version of OSX Updater (not the one from System Preferences > Software Update).
Peter

Export to pdf - document always opens on 2nd page, not 1st

Hi
As a photographer, I am really liking Pages for creating a pdf for clients to download from my website.
Only thing is that the pdf always opens on 2nd page (not first) - at least on my computer.
Any suggestions?
Example here: http://www.hotelresortphotography.co.uk/HRP-2015-BROCHURE.zip (15mb zip download)
With thanks in anticipation
Stephen Hyde
http://www.hotelresortphotography.co.uk

Hi Mnkbsnss
Thanks for quick reply & nice thought.
However, when I go to print the pdf, it shows 1st page as the cover photo & 1st page ready to print.
It's really only when opening the doc up that it starts at page 2.
But thx again
Stephen

HT201274 how to exit from recovery mode to normal mode

i have trouble with my ipnone 4S 5.1.1....
recovery mode dan can't to normal mode...it always blang...when i was restore from alway shown error 3491 or restor dan upgrading...
Thank you
max

iTunes: Specific update-and-restore error messages and advanced troubleshooting
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

HT201263 how to exit from recovery mode to normal mode

i have trouble with my ipnone 4S 5.1.1....
recovery mode dan can't to normal mode...it always blang...when i was restore from alway shown error 3491 or restor dan upgrading...
Thank you
max
how to fixing error 3194?

iTunes: Specific update-and-restore error messages and advanced troubleshooting
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

TS3694 how to exit from recovery mode to normal mode

i have trouble with my ipnone 4S 5.1.1....
recovery mode dan can't to normal mode...it always blang...when i was restore from alway shown error 3491 or restor dan upgrading...
Thank you
max
how to fixing error 3194?

iTunes: Specific update-and-restore error messages and advanced troubleshooting
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Switch from safe mode to normal mode problem

my comuter is stuck in safe mode , when start up i press f8 and try starting in normal mode but it still goes to safe mode . how can i fix that?

Hi,
First, please let me know if there is any program or updates installed before the issue occurs.
You may take the following steps to test this issue:
1. Boot the system using the “Last known good configuration”:
1). Turn on your machine
2). Immediately begin tapping the F8 key repeatedly (If you get to the Windows startup screen start over)
3). When the Startup Options menu comes up select “Last known good configuration”
4). Let the computer attempt to boot into Windows
If this successfully gets you booted into Vista you should be ok. Your system will function as it did before. If this does not get you booted into Vista
normally we can try running the System File Scanner.
2. System File Scanner
1). Turn on your machine
2). Immediately begin tapping the F8 key repeatedly (If you get to the Windows startup screen start over)
3). When the Startup Options menu comes up select “Safe Mode with Command Prompt”
4). At the command prompt type this command sfc /scannow
5). Then press enter
This utility will look for damaged or missing system files and attempt to correct the problem. When it finishes, it will tell you the results (example:
SFC found and fixed problems). Restart your system normally. If you boot successfully into Vista, the problem should be solved. Let us know if either of these steps solve the problem.
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Debug mode and normal mode

Hi;
we made a repair coding in MFBF. we send a mail to someone after saving proggress.
in debug mode it's working. but in normal mode it's not working.
WHY?.
Thanks

Hi,
What type of repair ? What have you used for that ? Please explain in detail.
Regards,
Mukul

Low ringtone volume if change vibrate mode to normal mode after missing incomming call

Initial condition: Sony Xperia Z1, C6903 (S/W: 14.5.A.0.270). Phone was flashed with all wipes Steps to reproduce:1) Goto phone settings and be ensure that:Vibrate mode with sound - ONIncreasing ring - ONSound start - ON Other sounds:Key sound - ONScreen lock sound - ONSound of tap the screen - ONvibro feedback - ONIn keyboard: The vibration when you press - ON2) Ringtone volume - 100% (Normal mode)3) Take incoming calls from any phone4) Check that volume of incoming call was 100%5) Change sound mode to vibrate only6) Take incoming calls from any phone to Z1 and do no answer (Miss the call)7) Change mode back to normal8) Take incoming calls from any phone9) Check that volume of incoming call was about 10-15%. It also can view in sound settings - ISSUE. Please give your feedback about this ISSUE! Issue is also reproduced on 14.5.A.0.242.

Increasing ring is the settings which affects on this ISSUE! If Increasing ring = OFF, all OK, if Increasing ring = ON - ISSUE! Also after issue it becomes much quieter sound pressing the three lower buttons even if you increase the ringer volume.To restore the volume keystrokes you must change mode from normal to vibrate and back again (provided that there were no calls).

New CS5.5 documents always open UNDER floating tools palette!

Long time Indesigner, just upgraded to CS5.5...and so far so good. Except for this one annoyance. IN CS3, which I have been using, a new ocument opens to the immediate right of the floating toolbox in upper left corner of my workspace. But in CS5.5, a new document window goes UNDERNEATH the tools, partially obscuring the rulers and small box in upper left that is used to drag the 0/0 measuring crosshairs to make new measurements. Sure, it is fine each time I open a new doc to (a) resize the window a little smaller so the lower right sizing grabber thingy is visible when I (b) grab the sidebar, pull the doc out a little ways, and then (c) use the lower right sizing grabber thingy to resize the doc window to my workspace so it is now pinned ot the right edge of the floating toobox. BUT SHOULD I REALLY HAVE TO DO THIS EVERY TIME? Is this a new feature of some kind? Opening new docs in CS3 did not require this resizing dance each time, it is just annoying and a step backwards in useability.

MAJOR changes in the user interface between CS3 and CS5/5.5. I'm guessing you are on Mac as Windows users don't have as many options, but there is now something called the Application Frame and with that also comes tabbed windows like in a browser. Using the application frame, with or without tabbed windows, I think, solves this problem, but I'm a Windows user so I'm going on memory from other posts, and many Mac users seem not to like the application frame as it obscures the desktop.

What is the difference when bouncing a Logic Pro X project to Stereo Mode and Normal Mode?

I was was working on a Logic Pro X Project which I am using as a Sequence for a band. When I completed my project, I mixed for left side to hear the Click track and I panned everything else to the right side. After I completed my project, I bounced to Mp3 in Normal Stereo Mode and after opening in iTunes I discovered that I am hearing the click on the right track. I again bounced and tried the Joint Stereo Mode thinking that would fix it but I still get the click track on both left and right. What is the difference between bouncing to Normal and Joint Stereo.
My goal is to produce a 2 track Mp3 Sequence so that all my click track is only heard on the left side and the produced audio is heard only on the right side.
Any suggestions?

FIrst, try to bounce to uncompressed aiff or wave and see if you get perfectL-R separation.
The compression algorithm does its voodoo and maybe some of the left right separation gets messed up with it.
About Joint Stereo.
The idea behind is to save data. The algorithm analyzes the stereo signal, when it sees signals/frequencies that are in the left and right channel, then it says, "having the same signal on the left and right channel is the same as storing only one channel (mono ), and when played back send that one channel to the left and right speaker. it saves you half the storage/transmission". However, you have to trust the voodoo again to think that if what comes out is the same as what went in.
If size and transmission speed isn't an issues, don't use Joint Stereo.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to switch fullscreen mode with normal mode in OSMF with mediacontainer and mediaplayer?

i use OSMF to make a video player ,use the mediacontainer and mediaplayer ,all works right but to switch from normal to fullscreen mode ,i don't know how ?
because my videoplayer can be resized with some ratio ect 50%.
anyone do something similar to this? any help?
thanks very much!

I did this:
public function toggleFullScreen( event:Event=null ):void
if( this.stage.displayState == StageDisplayState.NORMAL )
// set full screen display
this.stage.scaleMode = StageScaleMode.NO_SCALE;
$playerInstance.width = $stage.fullScreenWidth;
$playerInstance.height = $stage.fullScreenHeight;
bg.height = $stage.fullScreenHeight;
$playerInstance.addChild(controlBar2);
LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.ZOOM;
var resultRect:Rectangle = new Rectangle(0, 0, $stage.fullScreenWidth, $stage.fullScreenHeight);
stage.fullScreenSourceRect = resultRect;
this.stage.displayState = StageDisplayState.FULL_SCREEN;
else
$playerInstance.width = 600;
$playerInstance.height = 400;
$playerInstance.mediaContainer.width = 600;
$playerInstance.mediaContainer.height = 400;
LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.LETTERBOX;
bg.height = 400;
// set normal display
stage.fullScreenSourceRect = null;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
this.stage.displayState = StageDisplayState.NORMAL;

I have installed 10.8.5 and now am unable to login....neither safe mode or normal mode

Hi
I have updated 10.8.5 and my laptop restarted - then I get stuck in the login screen.
I could see my account icon and sleep/restart/shut down buttons on the screen but nothing works.
What I could do is to press the power key and force it shut down.
Even booting in safe mode does not help.
The screen remains no responses.
Is there anyone experieced similiar situation?

I am trying to install "WEATHERBUG" Weatherbug was allowed to run just fine on earlier versions of MOUNTAIN LION. 10.4 and later won't allow this 3rd party app to download.
WeatherBug Alert for Mac helps you plan your day with confidence by putting severe weather alerts and your live temperature on your desktop.
Features
The most reliable weather information found anywhere.
Severe weather alerts to help protect you and your family.
One click access to radar, forecasts and more on WeatherBug.com
Installation Intructions
Download zip file.
Copy file to Applications folder.
Run the app.
System Requirements
Mac OS X version 10.4 or later
Internet connection
Support
For support or to provide feedback on WeatherBug Alert for Mac, please visit the WeatherBug Alert Forum
Click here for the OS X 10.3.9 Compatible Version
FREE DOWNLOAD
WeatherBug Alert for Mac helps you plan your day with confidence by putting severe weather alerts and your live temperature on your desktop.
Features
The most reliable weather information found anywhere.
Severe weather alerts to help protect you and your family.
One click access to radar, forecasts and more on WeatherBug.com
Installation Intructions
Download zip file.
Copy file to Applications folder.
Run the app.
System Requirements
Mac OS X version 10.4 or later
Internet connection
Support
For support or to provide feedback on WeatherBug Alert for Mac, please visit the WeatherBug Alert Forum
Click here for the OS X 10.3.9 Compatible Version
FREE DOWNLOAD
When I click install WEATHERBUG from the FINDER it get this message.
"WeatherBug Alert" can't be opened because it is from an unidentified developer.
Your security preferances allow installation of only apps from the Mac App Store and identified developers.
Safari downloaded this file today at 7:33 AM from wdownload.weatherbug.com.

Document always opens in Preview mode, prefer Normal mode

Similar Messages

Maybe you are looking for