Document and PS Project - create a link via BAPI?

Hi everybody,
follow problem: I have a document and a project. How can I create a link between both via BAPI?
Means: create a real exsitens document in a project with ...
FB's. What is to do?
Thanks for help.
Regards Thomas

Hi,
one sol. might be ta <b>OAOH</b> with BUS-object 2001
another <b>OAOR</b>. pls search the corresponding fm's in that transactions
Andreas

Similar Messages

Create Support Message via BAPI with additional partners

Hi all,
i need to create a support message (slfn) via bapi / function module. The basic creation is no problem with BAPI_NOTIFICATION_CREATE.
But i need to set additional partner(functions) like "approved by" in the support message. With this bapi i can only set the processor and creator of the message.
How can i add additional partners via BAPI call?
Any help would be much appreciated.
Daniel

Hi Daniel,
i do not think there is a standard functionality for this.
you can use function module CRM_DNO_UPDATE_PARTNER to set partner functions to a message. You will have to build your own RFC enabled function module around this, though.
Then you can use it to add your partners after the message was created.
Regards,
Christoph

"Buffer table not upto date" while creating Service entry via BAPI

Hi All,
I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution.
Regards,
Garima

Hi ,
Please close all the applications and re-check your rquirement.
Also, check for any information from SM21 logs.
Some times, it can be due to program /report not correctly maintained.
Finally, Basis people need to validate & may re-start (cautios of Production system) system.
Regards
Nagaraju

How to create sto po via bapi-BAPI_PO_CREATE1

if create sto po via bapi_po_create1, which fields must be defined? and i want to change sto price.how to define bapi fields? can anyone give me a sample?

hi
check following
BAPI_PO_CREATE1
http://abap.wikiprog.com/wiki/BAPI_PO_CREATE1
hope it helps
regards
kunal
award if helpful

Create BOM alternative via BAPI

How can we create a BOM alternative via BAPI?
I now use CSAP_MAT_BOM_MAINTAIN but then I get the following error:
BOM already exists for 1234 W041 9
I do not want to use batch input.
Kind regards,
Lieselot

Hi,
U can use the following BAPI'S
BAPI_MATERIAL_BOM_GROUP_CREAT
BAPI_MAT_BOM_EXISTENCE_CHECK
i hope they solve your purpose!!
thanks

Saving compound graphics in structured documents OR how to create a link in a graphic

Hi all,
Frame 9 structured.
We need to make a graphic icon into a link. In nonstructured documents (we have a different product that is not in structure), we just create a text frame on top of the graphic in the anchored frame, and add a hypertext marker to it.
But in the structured docs, when you do that, Frame generates a .cgm file since the graphic is compound. Is there either:
1. Another way to make a graphic into a link
2. A way to persist the compound graphic into a file that does not get overwritten with a different name each time and that is also in a .png format.
We have tried tweaking the R/W rules to have Frame write out a PNG, and so far, this is not working. Here's the code block we tried:
element "graphic" {
is fm Graphic element;
writer anchored frame {
export to file "$(docname).png" as "PNG";
I can see no verifiable effect from this. Frame continues to generate a new .cgm file. And even if it did generate a .png, I assume it would increment the number in the filename. We have an images directory that contains all the images and we cannot support a bunch of loose images in the document directory, especially ones whose filename change all the time.
Anyone know if there are workarounds for this? We are budgeted to move to Frame 11 in 2013, so if there's a fix in that version, it would expedite our migration.
Thanks very much for any help,
Shelley Hoose
Rogue Wave Software

Shelley,
If there is more than one item in the anchored frame, I don't think there is any way to change the default behavior, that is, the generation of a CGM composite. Maybe you could through with an import/export API client, but that sounds like an extreme option.
I would suggest that this is not a bug, though. The possible layout variations in a document are endless and at some point FM just needs to make an assumption. So, I think this behavior is reasonable and not in need of a "fix." Maybe it would be nice if you could control the file format (which is always CGM), but otherwise it makes sense to me.
In short, if you must embed these hyperlink markers in the anchored frames, I think you'll need to do some programming to roundtrip XML. Even if you could get a PNG generated, you would lose the hyperlinks on the way back in. This begs the question... is it absolutely necessary to have these links? Is it because you need them in a PDF?
Russ

Imported Events to External Hard Drive and all Projects refuse to link!

Hi,
I have successfully moved all my iMovie Events to an external hard drive (EHD) as I am running out of space on my Mac. The Events all play fine, iMovie correctly links to them. HOWEVER: All the iMovie Projects I created using these Events are now showing yellow triangles and exclamation marks (but they play in iMovie for as long as the EHD is connected), and when I tried to import the projects to iTunes, all these appeared as missing source clip. What could have happened? Does this mean that I have to create projects with the source files on my Mac HD only, o that the Events have to be in their final location when I use them to create a project?
Thanks a lot!

The first thing to do is to move your Events back to your internal drive. They should go in the Movies/iMovie Events folder.
Check to see that all the links in your projects work.
(Note: If you are short on space, you can do this one event at a time.)
Then, you can move the events back to your external drive, but you must do this from within iMovie.
First, click View/Show Events By Disk.
Then Drag and drop the events in the EventLibrary List in iMovie to the small icon for the external disk that is also in the Event Library List.
This will preserve the links.

Using what I believe is image capture, how do I go about pulling up a scanned document and attaching it to send it via email?

Using what I believe is the app Image Capture, exactly how do I go about scanning and attaching a PDF document in order to email it? After scanning it I'm having trouble locating it while attempting to attach it to an email. Thanks.

At the bottom left of the Image Capture window is a drop down menu called Scan To which will let you choose where your scan will be sent. Create a folder on your desktop named Scans and send your scans to it. Then rename the scan to whatever will help you remember what it is.
Then when in Mail you can click on Attach and find the Scans folder and attach your scan.

Saved and publieshed Projects are not linking to the enterprise project types

Hi
We have 15 enterprise project types, when we create a project we will select that EPT's and create projects.
After create the project -- saving and Publishing -- server settings -- change or restart work flow -- it must show the project under the EPT which we selected but the problem is that it is showing all the projects in None.
We tried to asscoiate the project to the EPT but still it is ssowing up in basic project paln which we are not using.
Can any one had faced this kind of issue please revert..
Thanks for the assistance in advance.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Usually it means there's a failure in the workflow. A couple things:
1) Check the ULS log.
2) Try creating the projects from a non-SysAdmin account - which typically doesn't have a user profile - which causes workflow to fail.
3) Try creating an EPT with no workflow and see if you get the same results.
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

Import Word Document and Merging Projects

Please
look at this link

Hi Julie
Many of us here on the forums subscribe via E-Mail. So as
each post is made, it arrives in our in-box.
Those of us that operate in this manner tend to notice
immediately when the same person posts repeatedly to different
categories. In your case, by posting only a link, it first appeared
to be a spam bot. That happens a lot. We see where a person will
obtain a forum ID and login, then begin saturating forum categories
with nothing but a link that points back to some obscure web site.
I'm not certain, but it may be an attempt to garner better search
rankings on Google or something. So we are a bit hypersensitive to
that as a result.
We also see where a person is a bit on the frustrated or
antsy side and does the whole post to one category, then copy and
paste that post to every other category. In those cases, we figure
that the person is simply impatient and doesn't realize that all
categories are being monitored by the same folks. We tend to fix
these up by posting back and pointing links to a common thread so
that later if someone searches the forums for an answer and we
aren't around, they don't end up following five dead end posts
where nobody answered and yet the sixth (where an answer was
provided) was there but overlooked because they grew frustrated and
gave up.
Sorry if we appeared grumpy or unhelpful. That's never our
intent. As Colum said, we tend to pride ourselves on being fast and
accurate with our helpful answers.
Cheers... Rick

Import Word Documents and Merging Projects

Please
look at this link

Please do not post the same query in multiple forums. Most of
the people who can help monitor all the forums so will see your
post no matter where it resides. It also makes it VERY difficult
for others looking for a solution to your problem later on.
Click
here
for the other post.

Problem with creating business partner via BAPI

Hello! I have a simple File-RFC-File scenario:
XML-file with Firstname, Lastname and PartnerCategory. I use BAPI_BUPA_CREATE_FROM_DATA to create a partner with this data.
It works, in target file I have a number of new business partner, but I can't find new partner in the system. Like I only tested BAPI_BUPA_CREATE_FROM_DATA in "bapi" transaction without real effect.

Hi,
probably you didn't comit the BAPI
RFC adapter allows to specify comit for BAPI
add this to your RFC channel configuration and you will see the partner
for more info read section:
Commit Control for Single BAPI Calls
from
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Regards,
Michal Krawczyk

Creating Quality Notification via BAPI

I am attempting to create a quality notification using BAPI_QUALNOT_CREATE but am running into an issue. I need the ability to link the inspection lot number to the quality notification but I do not see a field for inspection lot in any of the BAPI segments. When i record results using defect codes in SAP, the quality notification that is created has the inspection lot linked to it (in the reference object tab). As there another field within the BAPI that i can use to pass the inspection lot number??
Thanks in advance...

Brock,
Thanks for the response. I have attempted to use the FM you suggested but still am not having much luck. After I feed the required data to the FM, I am prompted with the error message u201CNo quality notification type maintained for inspection lot type.u201D However in SPRO, under Quality Management -> Quality Inspection -> Inspection Lot Creation -> Maintain Inspection Types, the notification type is defined for each of the inspection types I am using. Is there any additional configuration I may be missing? Thanks againu2026
Harm

Create Contact Person via BAPI / CMD_EI_API (TCode VAP1)

Hi everybody,
I have to develop a function module, which has to be called from an external application (java). This function module should, create contact persons for customers (like Transaction VAP1 does).
I did not find any function module or bapi for this, but I found class CMD_EI_API, which seems to possibly help me. Unfortunately, there is no documentation for this class.
Could anyone help me getting the contact person's addresses into the system? Just hustle me into the right direction and I will walk by myself
Thank you very much
Ralf
Edit: The contact persons addresses have to be maintained for existing customers.
Edited by: Ralf Wenzel on Feb 21, 2012 12:19 PM

I have this working. I wrote a wrapper BAPI. If inserting a new contact, you need to get a new partner number otherwise it won't work. There is extra code in this function module that you can remove. I left it as I used the logic for other customer update BAPIs.
FUNCTION Z_CUSTOMER_CONTACT.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(CUST) LIKE ZCUSTOMER STRUCTURE ZCUSTOMER
*"     VALUE(TESTFLAG) LIKE WDL_FLAG-XFLAG DEFAULT ' '
*"     VALUE(FBAPI) TYPE CHAR01 OPTIONAL
*"     VALUE(CONTACT) LIKE ZCONTACT STRUCTURE ZCONTACT
*" EXPORTING
*"     VALUE(CUSTOMERNO) LIKE BAPIKNA103-CUSTOMER
*"     VALUE(RETURN) LIKE BAPIRETURN1 STRUCTURE BAPIRETURN1
*" EXCEPTIONS
*"      CLIENT_ERROR
*"      KNA1_INCOMPLETE
*"      KNB1_INCOMPLETE
*"      KNB5_INCOMPLETE
*"      KNVV_INCOMPLETE
*"      KUNNR_NOT_UNIQUE
*"      SALES_AREA_NOT_UNIQUE
*"      SALES_AREA_NOT_VALID
*"      INSERT_UPDATE_CONFLICT
*"      NUMBER_ASSIGNMENT_ERROR
*"      NUMBER_NOT_IN_RANGE
*"      NUMBER_RANGE_NOT_EXTERN
*"      NUMBER_RANGE_NOT_INTERN
*"      ACCOUNT_GROUP_NOT_VALID
*"      PARNR_INVALID
*"      BANK_ADDRESS_INVALID
*"      TAX_DATA_NOT_VALID
*"      NO_AUTHORITY
*"      COMPANY_CODE_NOT_UNIQUE
*"      DUNNING_DATA_NOT_VALID
*"      KNB1_REFERENCE_INVALID
*"      CAM_ERROR
   data: wa_header          type cmds_ei_header,
         wa_central_data    type cmds_ei_vmd_central_data,
         wa_central_datax   type cmds_ei_vmd_central_data_xflag,
         wa_address         type bapiad1vl,
         wa_addressx        type bapiad1vlx,
         wa_contact_addr    type bapiad3vl,
         wa_contact_addrx   type BAPIAD3VLX,
         wa_tax_ind_st      type cmds_ei_tax_ind,
         wa_tax_ind         type cmds_ei_cmd_tax_ind,
         wa_bankdetail_st   type cvis_ei_cvi_bankdetail,
         wa_bankdetail      type cvis_ei_bankdetail,
         wa_company_code_st type cmds_ei_company,
         wa_company_code    type cmds_ei_cmd_company,
         wa_functions_st    type cmds_ei_functions,
         wa_functions       type cmds_ei_cmd_functions,
         wa_tcontact        type CVIS_EI_PHONE,
         wa_phone_st        type CVIS_EI_PHONE_STR,
         wa_phone           type CVIS_EI_CVI_PHONE,
         wa_fcontact        type CVIS_EI_FAX,
         wa_fax_st          type CVIS_EI_FAX_STR,
         wa_fax             type CVIS_EI_CVI_FAX,
         wa_econtact        type CVIS_EI_SMTP,
         wa_smtp_st         type CVIS_EI_SMTP_STR,
         wa_smtp            type CVIS_EI_CVI_SMTP,
         wa_sales_data_st   type cmds_ei_sales,
         wa_sales_data      type cmds_ei_cmd_sales,
         wa_customer        type cmds_ei_extern,
         wa_cust_created    type cmds_ei_extern,
         is_customers       type cmds_ei_main,
         es_customers       type cmds_ei_main,
         wa_correct         type cmds_ei_main,
         wa_defective       type cmds_ei_main,
         wa_mes_correct     type cvis_message,
         wa_mes_error       type cvis_message,
         it_contacts        type cmds_ei_contacts_t,
         wa_contacts        type CMDS_EI_CONTACTS,
         messages           type BAPIRET2_T.
   FIELD-SYMBOLS: <bapiret2> type BAPIRET2.
   DATA: STATUS TYPE CHAR20,
         PARNR LIKE KNVK-PARNR.
   constants: FILLCHAR VALUE '/',
              gc_objtype_customer TYPE mds_ctrl_object VALUE 'CUSTOMER',
              gc_insert           TYPE c VALUE 'I',
              gc_delete           TYPE c VALUE 'D',
              gc_current_state    TYPE c VALUE 'C',
              gc_update           TYPE c VALUE 'U',
              gc_true             TYPE c VALUE 'X',
              gc_false            TYPE c VALUE ' '.
   include fbgenmac.
* generate data record
   fbgenmac 'Z_CUSTOMER_CONTACT'.
* Clear memory variables - needed if run in Test mode
* Initialization
   CALL METHOD cmd_ei_api=>initialize.
   wa_customer-header-object_instance-kunnr = cust-kunnr.
   wa_customer-header-object_task           = gc_update.
   append wa_customer to is_customers-customers.
   call method CMD_EI_API_EXTRACT=>get_data
     EXPORTING
       is_master_data = is_customers
     IMPORTING
       es_master_data = es_customers
       es_error       = wa_mes_error.
   IF wa_mes_error-is_error is initial.
     STATUS = 'OK'.
     LOOP at es_customers-customers into wa_cust_created.
       wa_company_code = wa_cust_created-company_data.
       IF STATUS = 'OK' and wa_mes_error-is_error is INITIAL.
*      is_customers = es_customers.
         free: wa_customer, wa_company_code_st,
               wa_company_code, wa_address, wa_sales_data_st,
               wa_contacts, wa_contact_addr,
               wa_sales_data, wa_tax_ind_st, wa_functions,
               wa_functions_st, wa_correct, wa_mes_correct,
               wa_defective, wa_mes_error, wa_cust_created,
               wa_tcontact, wa_phone_st, wa_phone,
               wa_fcontact, wa_fax_st, wa_fax, wa_econtact,
               wa_smtp_st, wa_smtp.
         FREE: is_customers.
         IF CONTACT-FIRSTNAME IS NOT INITIAL.
           CALL FUNCTION 'NUMBER_GET_NEXT'
             EXPORTING
               nr_range_nr                   = 'AP'
               object                        = 'PARTNER'
               QUANTITY                      = '1'
               SUBOBJECT                     = ' '
*           TOYEAR                        = '0000'
**          IGNORE_BUFFER                 = ' '
             IMPORTING
               NUMBER                        = PARNR
*           QUANTITY                      =
*           RETURNCODE                    =
            EXCEPTIONS
               INTERVAL_NOT_FOUND            = 1
               NUMBER_RANGE_NOT_INTERN       = 2
               OBJECT_NOT_FOUND              = 3
               QUANTITY_IS_0                 = 4
               QUANTITY_IS_NOT_1             = 5
               INTERVAL_OVERFLOW             = 6
               BUFFER_OVERFLOW               = 7
               OTHERS                        = 8.
           IF SY-SUBRC = 0.
* Add partner type 20
             wa_contacts-task           = gc_insert.
             wa_contacts-data_key-parnr = PARNR.
             wa_contacts-data-pafkt     = '20'.
             wa_contacts-datax-pafkt    = 'X'.
*        wa_contacts-address_type_1 = ''.
*        wa_contacts-address_type_2 = ''.
*        wa_contact_addr-fullname   = CUST-NAME.
             wa_contact_addr-firstname = CONTACT-FIRSTNAME.
             wa_contact_addrx-firstname = 'X'.
             wa_contact_addr-lastname   = CONTACT-LASTNAME.
             wa_contact_addrx-lastname = 'X'.
* Assign address data directly
             wa_contacts-address_type_3-task = gc_insert.
             wa_contacts-address_type_3-postal-data = wa_contact_addr.
             wa_contacts-address_type_3-postal-datax = wa_contact_addrx.
* e-mail address
             wa_econtact-task = gc_insert.
             wa_econtact-data-std_no = 'X'.
             wa_econtact-data-e_mail = CONTACT-E_MAIL.
*        wa_econtact-datax-std_no = 'X'.
*        wa_econtact-datax-e_mail = 'X'.
             wa_smtp-current_state = ' '.
             wa_smtp_st-contact = wa_econtact.
             append wa_smtp_st to wa_smtp-smtp.
             wa_contacts-address_type_3-communication-smtp = wa_smtp.
*        wa_contacts-contact_texts = ''.
             append wa_contacts to it_contacts.
           ENDIF.
           CALL FUNCTION 'NUMBER_GET_NEXT'
             EXPORTING
               nr_range_nr                   = 'AP'
               object                        = 'PARTNER'
               QUANTITY                      = '1'
               SUBOBJECT                     = ' '
*           TOYEAR                        = '0000'
**          IGNORE_BUFFER                 = ' '
             IMPORTING
               NUMBER                        = PARNR
*           QUANTITY                      =
*           RETURNCODE                    =
            EXCEPTIONS
               INTERVAL_NOT_FOUND            = 1
               NUMBER_RANGE_NOT_INTERN       = 2
               OBJECT_NOT_FOUND              = 3
               QUANTITY_IS_0                 = 4
               QUANTITY_IS_NOT_1             = 5
               INTERVAL_OVERFLOW             = 6
               BUFFER_OVERFLOW               = 7
               OTHERS                        = 8.
           IF SY-SUBRC = 0.
* Add partner type 30
             wa_contacts-data_key-parnr = parnr.
             wa_contacts-data-pafkt     = '30'.
             append wa_contacts to it_contacts.
           ENDIF.
* Assign contacts to customer structure
           wa_customer-central_data-contact-contacts = it_contacts.
* Set object_task to modify
           wa_customer-header-object_instance-kunnr = cust-kunnr.
           wa_customer-header-object_task = gc_update.
           append wa_customer to is_customers-customers.
           IF FBAPI = 'X'.
* MAINTAIN_BAPI seems to now work. Fills in table addr_appl_to_int used in function module
* ADDR_MEMORY_SAVE line 631. It should be blank.
             call method cmd_ei_api=>maintain_bapi
               EXPORTING
                 iv_test_run              = TESTFLAG
                 iv_collect_messages      = 'X'
                 is_master_data           = is_customers
               IMPORTING
                 es_master_data_correct   = wa_correct
                 es_message_correct       = wa_mes_correct
                 es_master_data_defective = wa_defective
                 es_message_defective     = wa_mes_error.
           ELSE.
             call method cmd_ei_api=>maintain
               EXPORTING
                 iv_test_run    = TESTFLAG
                 is_master_data = is_customers
               IMPORTING
                 es_error       = wa_mes_error.
           ENDIF.
           IF wa_mes_error-is_error is initial.
             if testflag <> 'X'.
               commit work and wait.
               LOOP at wa_correct-customers into wa_cust_created.
                 CUSTOMERNO = wa_cust_created-header-object_instance-kunnr.
                 SY-MSGID = 'F2'.
                 SY-MSGNO = '056'.     " Failure
                 SY-MSGV1 = ''.
                 SY-MSGV2 = ''.
                 SY-MSGV3 = ''.
                 SY-MSGV4 = ''.
                 CALL FUNCTION 'BALW_BAPIRETURN_GET1'
                   EXPORTING
                     TYPE       = 'E'
                     CL         = SY-MSGID
                     NUMBER     = SY-MSGNO
                     PAR1       = SY-MSGV1
                     PAR2       = SY-MSGV2
                     PAR3       = SY-MSGV3
                     PAR4       = SY-MSGV4
*               LOG_NO     = ' '
*               LOG_MSG_NO = ' '
                   IMPORTING
                     BAPIRETURN = RETURN.
               ENDLOOP.
               CALL FUNCTION 'ADDR_MEMORY_CLEAR'
                 EXPORTING
                   force              = 'X'
                 EXCEPTIONS
                   unsaved_data_exist = 1
                   internal_error     = 2
                   others             = 3.
             ELSE.
               ROLLBACK WORK.
               LOOP at wa_correct-customers into wa_cust_created.
                 CUSTOMERNO = wa_cust_created-header-object_instance-kunnr.
                 SY-MSGID = 'F2'.
                 SY-MSGNO = '035'.
                 SY-MSGV1 = ''.
                 SY-MSGV2 = ''.
                 SY-MSGV3 = ''.
                 SY-MSGV4 = ''.
                 CALL FUNCTION 'BALW_BAPIRETURN_GET1'
                   EXPORTING
                     TYPE       = 'E'
                     CL         = SY-MSGID
                     NUMBER     = SY-MSGNO
                     PAR1       = SY-MSGV1
                     PAR2       = SY-MSGV2
                     PAR3       = SY-MSGV3
                     PAR4       = SY-MSGV4
*               LOG_NO     = ' '
*               LOG_MSG_NO = ' '
                   IMPORTING
                     BAPIRETURN = RETURN.
               ENDLOOP.
               CALL FUNCTION 'ADDR_MEMORY_CLEAR'
                 EXPORTING
                   force              = 'X'
                 EXCEPTIONS
                   unsaved_data_exist = 1
                   internal_error     = 2
                   others             = 3.
             ENDIF.
           ELSE.
             messages = wa_mes_error-messages.
             LOOP at wa_mes_error-messages assigning <bapiret2>.
               CUSTOMERNO = CUST-KUNNR.
               CALL FUNCTION 'BALW_BAPIRETURN_GET1'
                 EXPORTING
                   TYPE       = <bapiret2>-type
                   CL         = <bapiret2>-id
                   NUMBER     = <bapiret2>-number
                   PAR1       = <bapiret2>-message_v1
                   PAR2       = <bapiret2>-message_v2
                   PAR3       = <bapiret2>-message_v3
                   PAR4       = <bapiret2>-message_v4
*         LOG_NO     = ' '
*         LOG_MSG_NO = ' '
                 IMPORTING
                   BAPIRETURN = RETURN.
             ENDLOOP.
           ENDIF.
         ELSE.
           CUSTOMERNO = CUST-KUNNR.
           SY-MSGID = 'F2'.
           SY-MSGNO = '152'.     " Failure
           SY-MSGV1 = CUST-KUNNR.
           SY-MSGV2 = CUST-BUKRS.
           SY-MSGV3 = ''.
           SY-MSGV4 = ''.
           CALL FUNCTION 'BALW_BAPIRETURN_GET1'
             EXPORTING
               TYPE       = 'E'
               CL         = SY-MSGID
               NUMBER     = SY-MSGNO
               PAR1       = SY-MSGV1
               PAR2       = SY-MSGV2
               PAR3       = SY-MSGV3
               PAR4       = SY-MSGV4
*         LOG_NO     = ' '
*         LOG_MSG_NO = ' '
             IMPORTING
               BAPIRETURN = RETURN.
         ENDIF.
       ENDIF.
     ENDLOOP.
   ELSE.
     CUSTOMERNO = CUST-KUNNR.
     SY-MSGID = 'F2'.
     SY-MSGNO = '077'.     " Failure
     SY-MSGV1 = CUST-NAME.
     SY-MSGV2 = ''.
     SY-MSGV3 = ''.
     SY-MSGV4 = ''.
     CALL FUNCTION 'BALW_BAPIRETURN_GET1'
       EXPORTING
         TYPE       = 'E'
         CL         = SY-MSGID
         NUMBER     = SY-MSGNO
         PAR1       = SY-MSGV1
         PAR2       = SY-MSGV2
         PAR3       = SY-MSGV3
         PAR4       = SY-MSGV4
*         LOG_NO     = ' '
*         LOG_MSG_NO = ' '
       IMPORTING
         BAPIRETURN = RETURN.
   ENDIF.
ENDFUNCTION.

Create Purchase Order via Upload.

Hi,
Our company have lost 4 months data due to some hardware problem. After hardware issue resolved we have to post all lost data. Therefore in MM module can it is possible that I can create PO order via BAPI program? We have four type of PO (Inventory, Assets, Changed off and IO). I got a BAPI function "BAPI_PO_CREATE1" can any body tell me how can I you this BAPI to create PO or Upload it?
Thanks
Syed Tayab Shah

Hi
[Sample Code|Re: BAPI-PO;
[Explanation About BAPI|http://abap.wikiprog.com/wiki/BAPI_PO_CREATE1]
Re: BAPI_PO_CREATE1-Runtime error
BAPI_PO_CREATE1
Regards
Pavan

Document and PS Project - create a link via BAPI?

Similar Messages

Maybe you are looking for