Document assembly not allowed

I have created several PDF forms using Adobe Designer 7.0 for Windows XP and I want to compile them into a single PDF document using Adobe Acrobat Professional 7.0's "Create PDF from multiple files" option. But when I try, I get a message that "The file (name) is protected. It cannot be used for this command" for each file in turn. When I open the files individually and look at the security settings, I see "Document Assembly: Not Allowed". I was wondering how I could change the settings to allow document assembly. Acrobat Help just tells me to contact the original document author...but I *am* the original document author!

Once a form is made in Designer, it can't be edited in Acrobat. They are two totally different technologies.

Similar Messages

  • No security but document assembly not allowed

    There is no security according to the properties security tab but Document Assembly is not allowed.  How do I change it to Allow?

  • Message No BS027 - Create Sales Document is not Allowed

    Hi All
    I have created a status profile zfm00001 copying the status profile FM000001.
    I have created a new user status as OPEN in which I have allowed all the transactions including create sales document.
    All the possible transactions in Funds Management object type is set as allowed.
    After I release these status for " * " FC & " * " CI for 2011, All other transactions are working properly.
    I am getting an error during Sales Order creation as " Message No BS027 - Create Sales Document is not Allowed", even though I have set the status for "Create sales document" as allowed.  I am going wrong somewhere..Please help
    Rgds

    Hi,
    Please, maintain in BS12, VA01-relevant business  transactions for object type FS0.
    Regards,
    Eli

  • Object Link to DMS document - does not allow to link to docs not released

    Hi Folks,
    I am trying to create an object link from cProjects 4.5 to a DMS document. When I select a document in DMS I am getting the message "26 223 Document <doc_number> has not been released". If I set the status of the DMS document to a released status I am allowed to create the object link.
    My question is - why am I only allowed to object link to released DMS documents? I want link to a DMS document regardless of the status.
    Thanks,
    Lashan

    Hi Lashan,
    Not sure whether this works, but do check in CFC01 and see "Document Type Dependent Data'
    Regards,
    Aby

  • Warning ,message: "Security Block - In safe reading mode, this document does not allow connection to (URL). Check Trust Manager to change out of safe reading mode." How do I do this???

    Can't give you any more details except the URL is:
    http://powerretouche.com/Tutorials_pdf/Black-white_plugin_tutorial.pdf

    That is not a Firefox setting, it is a setting in Foxit. See http://techdows.com/2010/06/how-to-enabledisable-safety-reading-mode-in-foxit-reader.html

  • Creating a pdf form that with document assembly = allowed

    I am having trouble creating a print and mail pdf form that i can combine with other pdf documents. I have created a form in live cycle designer. when i try and combine it with other documents it says that the form i have created is protected and cannot be used for this command. I have not explicitly put any security on the form. I have simply created the form and saved it as a pdf. when i open the form with adobe acrobat pro and check the document properties it is always set to "document assembly = not allowed" how do i change this? i have experimented with the security settings and even using a password and allowing changes to the document but nothing seems to change the "document assembly = not allowed" i have adobe acrobat 7.0 professional with Live Cycle Designer. Please Help!

    Brian,
    PDF Files made with Acrobat are based on postscript.
    PDF Files made with LiveCycle Designer are based on XML and are essentially wrapped in a PDF. Once modified in LiveCycle Designer, you can no longer edit the file directly in Acrobat.
    They do not share the same base file type and can not be combined into a single PDF using Acrobat version 7.
    One of the new features of Acrobat version 8 - is called packages. Packages allow you to combine files of different types (acrobat and designer) as well as documents with different security settings (also not previously allowed). Each file in the package maintains it's independent identity and settings, wrapped in a new pdf file.
    Recommended solution: Upgrade to Acrobat 8 Professional, get the new version of designer, and the ability to use packages.
    Hope this helps.
    Angie Okamoto

  • Changing The Document: Not Allowed

    Hi,
    Kindly refer to this link - https://forums.adobe.com/thread/1565222 regarding with our issue on PDF files created using Acrobat Pro 7. When we open the files using higher versions the Changing the Documents and Document Assembly always marked as Not Allowed.
    Thanks

    Attention: Acrobat Product EXPERT (Adobe Support HelpDesk)
    PLEASE Reply

  • Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

    Hi,
    I have an SSRS report that works fine in Visual Studio 2008 BIDS.  This report references a .Net assembly namely:
    System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    I use this assembly in some simple Code functions in the report. e.g.
    System.Web.HttpUtility.UrlEncode(inURL).ToString
    I have converted the SSRS project to 2012 and am trying to preview the report.  However, I get an error relating to: "That assembly does not allow partially trusted callers".  If i deploy the rdl to my local SSRS it renders fine, but
    how do I fix Visual Studio to preview the report without error? This is highly annoying.
    My Visual Studio version is:
    Microsoft Visual Studio Professional 2012
    Version 11.0.61030.00 Update 4
    Microsoft .NET Framework
    Version 4.5.51641
    SQL Server Reporting Services  
    Microsoft SQL Server Reporting Services Designers
    Version 11.0.3402.0
    Any help is appreciated on this one.
    Regards,
    MrHH

    Hi MrHappyHead,
    According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
    trusted callers".  But the report works fine after you deployed it to report manager.
    Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
    (one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
    refer to the following steps:
    Add namespace system.security to AssemblyInfo.cs file
    Add [assembly:allowpartiallytrustedcaller] to the file.
    Set trust level to "Full" in web.config file
    For more information, please refer to the following document:
    http://support.microsoft.com/kb/2869522/en-us
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • ICloud will not allow me to download my documents... Pages won't let me view them...

    Yesterday I decided to start fresh with my iPad so rather than going through and deleting countless bits of info, I restored it back to factory settings. I had pages set up to back up my work to iCloud. I restored my iPad and then put Pages back on to it.  I tried to retrieve my documents from iCloud and they when they finally appeared they would not open (minus one very small document). They are all arranged in the same folders I had them before except without a thumbnail preview. they have a default pages symbol on them and will not open.  I figured that I could just go to iCloud.com and re-download them but I found them in the same state. They would not download in any format. Please help me! Finals are this week and ALL of my notes are stored here!
    Important Info:
    I am running on a PC
    my iPad is up to date
    I have tried to restore back to old iPad (prior to restore referenced above). Same effect.
    -Stephen

    You don't give any details about what you mean by "will not allow" so the following may or may not help, but have you tried the Windows Explorer method discussed in the following link if the primary method isn't working: http://support.apple.com/kb/ht4083
    There are 3rd party applications which claim to extract things from iTunes backups but I don't have experience with any of them.

  • The latest version of Pages does not allow a Pages document to become a 'stationery pad'!  Is there a way to do this this other than through the 'Get Info' window?

    The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'!  Is there a way to do this this other than through the 'Get Info' window?  As Pages templates cannot be ordered in folders, my many templates are effectively unusable now and I need to find another way to order and access them.

    Are you aware of that you can still use Pages 09 on Mavericks? You don't have to go thru the grieves of using the crippled Pages 5. Pages 09 should bi in Applications/iWork 09 folder.

  • I just installed the free trial Adobe Acrobat XI Pro and it is not allowing me to freely convert a pdf to a word document????!!!!

    I just installed the free trial Adobe Acrobat XI Pro and it is not allowing me to freely convert a pdf to a word document????!!!! Why is this? Does anyone have this problem?

    When you report a problem you should always try to include as much relevant information as possible. Saying "it doesn't work, help me!" is not very helpful to us, because there could be a million reasons for it not working... What exactly happens when you try to convert a PDF to Word? Are there any error messages? How exactly are you trying to do it? Also, what operating system do you use? What version of Word? What exactly version of Acrobat? etc.

  • Not allowing changes to payment terms after the AR document is released to accounting

    Hi,
    Anyone know the best way to not allow a user to change the payment terms after the AR document has been created in AR? This is affecting aging because users are changing the payment terms without permission. What is the best way to control that?
    Thank you.
    AK

    Hi A K
    Frequent change in payment terms is something business should introspect. Payment term is decided and agreed upon with customer/vendor during the initial stages.
    However from IT perspective, it can be controlled keeping some system controls.
    1. Limit the Customer master change transaction to very limited users or to a manager. There should be internal approvals by management for business to make a change. Bring this into force.
    2. Regularly run the customer master change reports and provide the trend to management to restrict or limit the changes.
    3. Use Change Message control for master data by providing necessary warnings or error messages when master data is changed.
    4. In  the sales order level, there is every possibility to change the payment term. Based on the user authorization get the payment term field greyed out and provide change access to accounting or to a specific user upon approvals. This is a bit complex process but I feel this brings up controls and stops the process from exploitation.
    5. Also activate 'Sensitive fields' KNB1-ZTERM for payment term field in customer master. This brings up another layer of confirmation of change by other users.
    6. Another back route, not recommended in all cases, is to subsititute the required payment term during accounting document posting.
    Hope it helps.
    Thanks,
    Sekhar

  • Security settings to not allow Changing the PDF Document

    I'm trying to create PDFs where users can do anything they wish to the PDF document including Document Assembly but not Changing the Document (i.e. modifying the original text).
    Looking at the security settings in Acrobat, I can't seem to find an option that would only limit Changing the Document and nothing else. Is there a way this can be done?

    > In how we're going to end up using the secured document - no.
    But in the way that Acrobat views it - yes.
    I suppose you could "try" to outline the text before PDFing it. Whether you can do that will depend on what application you are using to create the original document.

  • Setting "Filling of Form Fields" document property to "Not allowed"

    I am using Adobe LiveCycle Forms, and I want to set the property "Filling of Form Fields" as "not allowed" in the pdf documents it renders (that property
    can be found in the "Document Properties" window of Adobe Reader, under the Security Tab).
    Is there any way to set it , in the server (using the EJBClient class that renders the form) or
    in the client (via javascript)?.
    Thanks

    [email protected] wrote:
    > I am using Adobe LiveCycle Forms, and I want to set the property "Filling of Form Fields" as "not allowed" in the pdf documents it renders (that property
    > can be found in the "Document Properties" window of Adobe Reader, under the Security Tab).
    >
    > Is there any way to set it , in the server (using the EJBClient class that renders the form) or
    > in the client (via javascript)?.
    >
    > Thanks
    You should be able to set this on your XDP file from within Designer. Go to File-->Form Properties
    and you'll see a PDF security tab there with the same options you have in Reader.
    Justin Klei
    Cardinal Solutions Group
    www.cardinalsolutions.com

  • How do you copy one page from a document into a new document? The new pages does not allow you to copy a thumbnail

    In the old pages you could simply copy the thumbnail and past a certain page into a different document.
    The new pages does not allow you to do this.

    That and 95 other things it does not let you do.
    Pages '09 should still be in your Applications/iWork folder, use that instead.
    Peter

Maybe you are looking for