Document attach to inspection lot

Hi
How to attach the doc. in QM inspection lot? There is no standard functionality available.
Regards,
Vairavan
Edited by: p vairavan on Mar 26, 2008 1:14 PM

Hi,
Normally document will be attached in Inspection method , which inturn will be attached to MIC and subsequently you can see this in result recording screen.
By this way it is attached to the inspection lot.
If you are in ECC 6.0 , In the Quality Inspector role, you can display, upload, and delete documents during results recording for inspection lots.
See the link below
http://help.sap.com/saphelp_erp2005/helpdata/en/84/bc5a4254781853e10000000a155106/frameset.htm
Hope this will helps you.
Regards
K.M.Arun
Edited by: ARUN KM on Mar 26, 2008 8:24 PM

Similar Messages

  • Documents attachment in Inspection Lot

    Hi
    My requirement is to attach the documents (WORD or PDF or .Tiff or Excel file) in Inspection lot Usage decision Screen. Also Any user should be able to see all Documents attached in that Inspection Lot.
    I have attached the document from "Services For Objects" tab which is available in Usage Decision Screen. But after attaching the Docs I am unable to see what docs I have attached in Inspection Lot.Even I have done the Usage Decision & Save My entries.
    "Services For Objects" tab is available in almost all transaction & it is at  left hand corner top most tab below enter green tab.
    Plz help me How to attach the Docs in Inspection Lot & How to  Display it in Same Inspection lot screen?
    Waiting for your reply
    Thanks
    Pavi

    Hi,
    "Services For Objects" tab is available in almost all transaction & it is at left hand corner top most tab below enter green tab.
    Plz help me How to attach the Docs in Inspection Lot & How to Display it in Same Inspection lot screen?
    Attaching documents from Services fro Objects tab uses doc type A2 : ArchiveLink. Default setting is to stored it into SAP database. In order you want to stored these attachments into content server, you need to define respository for the same accordingly.
    In addition to these you need to maintain link tables for the objects pertaining to inspection.
    For example:
    =========
    Tcode OAC2
    QMICERT -> PDF
    QMILETTER2 -> PDF
    SM30 - TOAOM_C
    BUS2078     QMILETTER1     X     A2
    BUS2078     QMILETTER2     X     A2
    BUS2078     QMILETTER3     X     A2
    BUS2078     QMOLETTER1     X     A2
    BUS2078     QMOLETTER2     X     A2
    BUS2078     QMOLETTER3     X     A2
    Tcode: OAC3
    BUS2117     QMICERT          X     A2     TOA01
    BUS2117     QMICERTPDF        X     A2     TOA01
    Above is an example for Quality notification.
    Also check that following tables entries are appropriately maintained.
    TOAOM
    TOADV
    TOAAR
    Hope this is useful.
    Regards,
    Deepak Kori

  • Doc attachment to INSPECTION LOT

    i want to attach a doc to inspection lot, as per std sap, inspection lot is not an object link.
    if i want an attachment, wht i have to do?  is it a development?
    i have to develop a object link "inspection lot"? and develope a screen?
    how to do? wht are the steps involved? pls do guide me
    Regards
    Surya

    hi,
    you have tree option,
    1. QINF--Quality Info Record
    2.QMTBDOC--Quality inspection methods,
    or if u want exact object, then u have to go for Zobject.
    Also u check in SE80, standrd Objects available in DMS, function group is CV120.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ->Maintain key fields.
    Process
    1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Benakaraja
    Edited by: benaka rajes on Jun 23, 2009 1:36 PM

  • Without PRT ,inspection lot shud not get released

    Dear all ,
    We use to attach PRT at inspection plan with DMS, we attache TDS (test data document) as PRT to to operation at inspection plan, client's requriemtn is that if there will be no TDS document attach to ispection lot , it should not get released .
    pls reply .
    Regards
    Prerna

    Dear Prema,
    If you do not maintain the PRT for the inspection plan, do not put the release status for the inspection plan.
    This will block inspection lot from processing as the status of the inspection lot will be in CRTD. once you assign the PRT release the inspection plan and do the resetting of the inspection lot through QAC3.
    Try to explain this Std SAP functionality to client and revert if u need any help.
    Regards,
    Anil

  • Control of Inspection Lot Creation in Material Master settings

    Hi
    There are settings like
    1 for each  document material,  batch ,storage location
    2 for each   material,  batch ,storage location .
    X for PO  , batch and storage location .
    for each material document item
    In the Control inspection settings of material master
    i Can't understand the logic by F1 help .
    Any help will be appreciated
    Thanks
    JJ

    Dear JJ
    These setting are done for controling the creation of inspection lots
    1) If you want to create an inspection lot to all the goods receipt then you have to choose
    ' ' An inspection lot for each material document item .An inspection lot is created for each item in the goods receipt document.
    2) X for PO , batch and storage location .
    An inspection lot is only created during the first goods receipt for each PO item . Means if you have a PO item with quantity 50. and you make a GR for the same PO for 10 quantity an inspection lot will be created. But if you make again GR for the PO item inspection lot will not be created. Those item will go directly to unrestricted. This holds good if the PO item is same, batch number is same and aslo the storage location
    3) 2 for each material, batch ,storage location
    If you set this indicator, the system creates only one inspection lot for each material and batch. This setting is only advisable for materials with a batch management requirement. Again material, batch number and storage location should be same
    4) '1'  for each document material, batch ,storage location
    If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
    hope this helps
    Regards
    gajesh

  • Inspection lot not appearing in QA32

    Dear Experts,
    We have transfered a batch  from a storage location of one plant to the storage location of another plant through movement type 909 with all require datas entered and saved the transaction . But while we checked in MB51 and QA32 , no material document or a Inspection lot for stock transfer not appearing.
    When checked for the logs Message QA 150 appearing for ' Errror inserting QALS as update was terminated ' . What to do ?
    Thanks.

    Hi
    Is 909 is SAP's standated Mvt type?
    Check the setting for this mvt type in QCC0->Qulity inspection->Inspection for goods Mvt.--->Inspection lot origine & Deactivate Quality inspection.
    I have a suggesion.for transfering Material from one plant to other SAP has own Mvt type:301(single step--->Without purchse Order).You can active 08 inspection type for Material at receiving plant.It will create a lot at receiving plant.
    In addition to this 351& 352 are used when purchse order(STO) is there.
    In hop this will help me.
    revert back for any Querries.
    Regards
    Sujit Gujar

  • Create inspection lot move data from mseg to qals

    hello.
    When SAP create inspection lot from MIGO,  I need to move mseg-ablad ( uploading point) to qals-yyfield.
    In Migo we can have more than one pos, then system create differents inspection lot.
    Is it possible ??? are there any user exit to do that ??? i see user migo's exist  and inspecion lot's create, but in both cases i don't see all data to read an and move it.
    Regards.
    Antonio

    Namastey
    In my case i have Migo with more than one position, and for each position the system will create a new inspecion lot.
    Do you mean there are more than one Items in PO and for each Item there will be different inspection lot?
    Then,
    You need to get Material document number for inspection lot number and get MSEG-ABLAD which will be QALS-YYFIELD (YYABLAD).
    I hope, I have understood your question!!
    Amol.

  • Material document not updated in inspection lot QALS table

    HI
    The inspection lot created for 04 inspection type  during Goods Receipt.
    The material document is appearing in the inspection lot but found not updated in table entries.  i.e.., QALS -MBLNR
    When i checked other inspection lots it was found updated. How this happened ?
    Any Snote to be applied?
    Thanks

    Hi,
    Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
    If same material document number repeats in the same calendar year,then document update will be terminated.
    As, document no. will be already existing in tables, system won't allow to update the same no. again.
    Thanks & Regards,
    Anand.

  • Material document cancelaation after genarating the Inspection lot

    Hi All,
      Pls let me know how to cancel the material document after Inspection lot created in QM
    Regards
    Raj

    hi
    it is difficult once you have posted the material using QM ,kindly refer the following link for reversing the stock posting
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/b9b3341a933f50e10000009b38f83b/frameset.htm
    regards
    thyagarajan

  • Manual Inspection Lot and Material Document

    Dear All,
    I created a manual inspection lot using inspection type 89. i wanted to make a relationship between my GRN material document and the Manual inspection lot. Is there a way to link these two. Even in the table level is there a relationship between these two?
    Regards,
    DTD

    >
    TMDTDSL wrote:
    >PO - 470000565
    > LI 10 - Material 1000157  Qty - 100 - Sales Order 60156 - Batch X123
    > LI 20 - Material 1000157  Qty -   60 - Sales Order 60157 - Batch X123 
    >
    > If i assign inspection type 01 for the above mentioned material two inspection lots will be created with the same batch number. What i want to do is in RR combine these two and record results for one inspection lot. By using inspection type 89 even though i can create one inspection lot combing those two, SO reference (Mat Doc reference) is not there. What you suggested is good but once i create a manual inspection lot the way you explained how do i keep the relationship to the automatic generated inspection lot. If you could explain little bit further really appreciate.
    Your understanding is correct here. For above two lot if you batch number X123 then simply assign this batch number X123 to manually created lot with type 89, this way you can map all three lot with batch number.
    If you want to enter SO in manually created lot for information or reference then assign this SO at field short text in QA01 (technical name - QALS-KTEXTLOS)
    FYI - For 89 lot you can do RR & UD for record but this lot would be not stock relevant.
    Hope this helps.
    Thanks!!!

  • Material document posted on the same inspection lot but using another batch

    Hi, May I request your assistance with regards to our issues on iinspection lot For this inspection lot, there were three movements created. When doing Usage Decision, it is reporting that there are still remaining quantity 13,332.413 LPA open in the inspection lot using batch X But checking in MMBE, the amount is in batch Y and there is no remaining qty in batch X. can you help me UD the inspection lot? Thanks, sara

    Hi Sarah,
    In UD screen, there is a message next to "insp End Date" that is " Actual Quantity of lot is greater than lot quantity". I guess, actual quantity has been changed using transaction QAC1.
    Kindly check for corresponding entries in MB51.
    There might be inconsistency between QM and MM stock.
    Use Sap Note 48815 and check for any inconsistencies.
    Amol.

  • BAPI for Inspection lots

    Hi,
    I'm executing the following steps in development:
    Goods Receipt
    (Transfer Order Creation)
    Transfer Posting
    (Transfer Order Creation)
    The goal is to receive the goods in an "external" Storage Location and then repost it in an "internal" Location. The TOs are automatically generated per Customizing of the Movement Types.
    I'm using the BAPI  BAPI_GOODSMVT_CREATE.
    In case of automatical Inspection Lots (Material master, view Quality management) the Express document lands in my Wokplace Inbox with the following error message:
    Error during creation of transfer orders for material document 5000002931
    Date: 10.03.2009
    Time: 13:13:42
    Transf.reqmnt CP1 8000000325
    TRs relevant for inspection lots cannot be processed using this func.mod.
    By pressing 'Ctrl + F6', you can directly trigger subsequent processing
    Is anyone aware of the BAPI, which will work with the inspection lots?
    Thanks,
    Taras

    Hi,
    you should be able to create inspection lots when executing                 
    BAPI_GOODSMVT_CREATE. See for example the attached note 536769 that         
    is about wrong status in the inspection lot created in this way.                                                                               
    Please review your data used for testing this BAPI. 
    Best Regards,
    Arminda Jack

  • Documents attached to MICs

    I know that it is possible to attacht documents to inspection lots, inspection methods and codes of qualitative insp. char.
    But is it possible to attach documents (PDFs, images, etc.) directly to MICs to make clear what is meant by the inspection characteristic?
    Regards
    Marcus.

    Actually, that is really what the METHOD is used for.  The method describes how the test is to be performed, sample preparation steps, training required, equipment required, anything important to running the test.  It can be as elaborate as you want.  Methods are assigned within the MIC create/edit transactions. (QS21 thru QS28)
    Many places just create a method header that is primarily the method number used in their laboratory manuals to reference the test method.  But you can add long text to the method an basically write a book about the test there.  You can also link make links to DMS and externally maintained documents on a network drive for instance.  That requires some coding and configuration to do however.
    Craig

  • SAP DMS Link to Inspection Lot QALS

    Hi experts,
    Can anyone tell me how to implement the Object Link to inspection lot.
    Am using EHP 6.and found that there are some notes to be implemented note.
    Does anyone have worked with the DMS Object link with Inspection lot.
    request you to kindly let me know the solution at the earliest.
    regards,
    veeramani

    Hi tilak Raj,
    Thanks for the reply.
    Can you please suggest me.
    For Inspection Lot object link, i have seen some note .and there is a option to go ahead with the link that you have mentioned.
    Can you please suggest me by which method i can achieve my requirement easily,since am going to use the Screen number 500 which is a dummy screen in DMS.
    Also the attached Documents to inspection lot should visible in Results recording.
    is there any standard switch or business Function for the DMS Object link to inspection lot  ???
    Please suggest me ASAP.
    Regards,
    veeramani

  • Follow-up action : please help - Inspection Lot related

    Hi,
    I am having the following trouble:
    Through MB02, a printout is generated to the local printer (LOCL).
    However, through QA11, when we save, we have a custom follow-up action attached that pops-up a
    dialog screen.
    The follow up action is triggered when a usage decision is changed for the inspection lot.
    The follow-up action (configured in IMG) calls a Function Module and a screen, which in turn populates
    a value into a custom DB table (based on the buttons, on the screen, sending either to LOCL or to a
    zebra printer).
    Now, what has to happen is that after inserting the value into a custom table, it should also open a sapscript and output.
    The Sapscript and print program are there, with the print program being created 3-4 years ago by someone
    else. However, even though we have code in the print program to update nast, in turn creating a message
    for output (1st the custom DB table is checked to see if the values match, MATNRCHARG), It does not update
    NAST. When we go through MB02, it does, but this should happen automatically after selecting one of the radio
    buttons on the original pop-up & selecting print.
    Please help. I don't know what to do and can't enable a debugger from the pop-up and if going though QA11,
    I can't get it to stop inside the print program (only inside the custom FM).
    Cheers,
    John

    hi
    kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
    regards
    thyagarajan

Maybe you are looking for