Document attachment won't open in pages

I have installed pages on my iPad 2 and when I am emailed a document, PDF,doc,ppt, I don't have the option to open it in pages. The only option I get it to print it. Shouldn't I be able to move into pages from my mail program?

If the document is a word doc (.doc) or a pages document (.pages) and you have properly installed Pages on your iPad, you should see an option to Open In... when you tap and hold.
You can't open .ppt documents unless you have Keynote installed
You can't open PDFs unless you have a PDF reader installed.
Since you have installed Pages on your iPad, and it isn't working, I would suggest trying two things:
1. Do a full shutdown and restart - double click your home button, tap and hold on one of the running apps icons until you see them all wiggle and offer a "-" badge, then tap each "-" badge to shut them down. Then click and hold the Home and Sleep Buttons until you see the shutdown slider - Shutdown. Wait a minute or so then restart your iPad. You will see the Apple Logo appear. When the iPad is restarted, open your Mail app and tap and hold on your email attachment and see what happens.
2. If that doesn't fix the problem (and the attachment is a .doc or pages document), the next step would be to do a full reset and restore, but try the first action before you get that far.
You might contact the sender to confirm the type of document you have received. Can't hurt. Sometimes things get corrupted - ask them to resend in a format that you can read. See the iOS iPad User Guide (found under the Bookmarks Icon in your Safari app) - see the section on Mail Attachments.
If you don't have Keynote or Numbers installed, I would recommend them or other apps that can read your email attachments such as OpenDocs, etc.
Also, if you don't have iBooks, it is worth the download.
Good Luck.

Similar Messages

  • I have a mac air and an iMac and both have Pages. I use Pages on my air and save all documents to iCloud. I can see them on my iMac but it won't open with Pages. It becomes visible if I change it to open with preview but I can't interact with it.

    I have an mac air and an iMac 5k - pages runs on both.  I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it  - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from  any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it  ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough  - or maybe it's me?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. Any help?

    Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks

    I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
    I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps!

  • Pages cycles through documents and won't open any of them - what do I do?

    Pages cycles through documents and won't open any of them - what do I do?

    Thanks for replying -
    my operating system is OS X Lion 10.7.5
    Pages version 4.3
    What I mean by 'cycles through documents" is that when I attempt to either open a document or just open the application - it looks like the application begins to start - I see the first page of a bunch of documents very quickly going from left to right on my screen but then I see a bar in the middle of the screen (I'm not sure what its called but its the one that tells you to wait while the computer does something) - and then it just stays there, never opening the documents.
    My version of pages has always had the "cycling" effect at the beginning but it always ended quickly and I could begin working on my documents - now.... I can't begin working on anything and the only option I have is to force quit.
    Thanks for any advice you can give me!

  • .pages file created in Pages for Mac won't open in Pages for iPad

    Just created a pages document on my Mac, saved it to my google drive and when attempting to "open in" from my google drive the file won't open in pages for iPhone or iPad (mini).
    All versions of Pages are on latest release.
    Messge reads:
    Document can't be imported.
    The file format is invalid.
    I download both the mac app and ios app a week ago.
    Thank you for any info!

    I've been testing file structures via google drive this morning and have yet to find a solution.
    Compressed files will not open in Pages on the ipad and an upload to Google Drive of a .pages document re downloaded to my desktop will no longer open in Pages on the Mac.
    Somewhere in the google ecosystem during upload or download / "open in" (on the ipad) the file is being restructured so that it cannot be recognized.
    An hour call with the team at Google hasn't supplied an answer yet and they have opened a case file to investigate.
    I'll update when I hear back.
    Thanks!

  • I have adobe installed on my computer but some documents still won't open

    I Have Adobe on my system but some documents still won't open what should I do?

    I am trying to open some documents from a Canadian site some documents open but some gives me a page saying"please wait.........if this message is not eventually replaced by the proper contents of the document,your PDF viewer may not be able to display this type of document....<br/><br/>You can upgrade to the latest version of Adobe reader for windows,Mac or linux by visiting http://www.adobe.com/go/reader_download"<br/><br/>I already have the latest version but the page still won't open

  • Safari won't open any page

    I'm using 7.0.5 Safari on Maveriks
    Safari won't open any page, unlimit loading... ... ...
    Chrome and other browsers - working good, no errors.
    App Store and Updates - work well
    No network issues.
    Safari - clear cache and reset safari - didn't work.
    hosts file is ok
    no extensions
    delete all plug-ins except default ones.
    hm.. what else...
    apple extreme wifi router - work's well.
    Other devices at home has internet on it, other macbook pro doesn't have a problem with safari.
    in console - no errors
    any page won't load in safari, just a white screen and loading progress..
    What should I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • TS1702 I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    You could try downloading a program called Calibre.  It is very good at converting files between formats.  I use it all the time to convert PDF's from work to read on iTunes when I don't want to have to keep zooming in and out to read the actual text. 
    I know that iBooks will read PDF's but they can get pretty squashed down some times. Especially if the original font was small to begin with.  So I run them through Calibre and then email them to my phone and open them in iBooks. 

  • Safari won't open a page

    Hey!
    I've got a big problem: My Safari wasn't able to open a page. So I decided to uninstall it. When I installed it again I still had the same problem as before:
    Safari won't open a page. Even not google.de or google.com
    Firefox works perfect, it's only Safari...
    Is there anything wrong with the Internetoptions? I'm connected wireless with an airportExtreme since two weeks. I don't now if it was working before...
    Anyone knows a solution? : )
    Thank you...
    Björn

    ok, i've found the problem myself... The app piclens made the problem... now it's working fine : )

  • Safari won't open any pages since I downloaded McScan Beta V

    I downloaded McScan's Beta version the other day from securemac. Since then, Safari won't open ANY pages at all, giving me the message, "Safari can't connect to server"
    "Safari can’t open the page “http://aol.com/&#148; because it could not connect to the server “aol.com”.
    I dragged McScan to the trash, and still won't work. I also ran through the Safari Preferences, and made sure I had followed their suggestions, "”.Choose Preferences from the Safari menu and click Security. Make sure that the checkboxes to use plug-ins, Java, and JavaScript are selected and that the "Block pop-up windows" checkbox is not selected." Still no luck.
    Any idea how I can get Safari to work again?
    Thanks,
    Tom McDuffie
    [email protected]

    Hi Tom,
    You might want to try posting this in MacScans forum area too:
    http://macscan.securemac.com/macscanforum/index.php

  • Why do Word Documents get distorted when opened in Pages?

    Why do Word documents get distorted when opened in Pages?

    ssprengel wrote:
    The screenshots you’ve posted look very similar to me, but they are all composed of tiny dots not a continuous-tone image.
    Yes.  They don't make any sense to me either.  Are we supposed to be looking at a blank dark gray rectangle, or has the upload process failed the OP ?

  • Safari won't open most pages

    Safari Mavericks suddenly won't open many pages, including Apple's! Many posts on this, it's not just mine. Modem is working fine.

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • Safari won`t open private pages made in iweb

    Safari won`t open private pages made in iweb, but it works in Firefox! Why is this happening! It even works in internet explorer! But in Safari it doesn`t, it just can`t load the page, the login dialog doesn`t show up, it just stand there trying to load the page! Please help?

    Here is what finally worked for me based on a post I saw on another thread. Apparently the login.keychain file for the use is corrupted.
    Trash the "login.keychain" file located in the Keychains in the users Home folder.
    (Users/yourname/Library/Keychains/
    Then access the site once more. It now works as expected. You will need to authenticate the new keychain file and grant access when needed for the website to use your login keychain.

  • Scanned documents won't open in pages.

    I have an HP Photosmart D110. I have tried scanning and saving to documents with tiff, jpeg and pdf but when I open pages the documents are greyed out and won't open. I am using Mac OS X version 10.6.8. I am new to Macs and am not tecnical, please help.

    The HP scanners usually save to certain default folders which may not have read/write privileges.
    Look in the scanner panel and you will see that you can choose to save to another location. Choose your documents folder or desktop.
    But I think you are actually trying to open the scans from the Open dialog. Open is for Pages or other WP documents, not for images.
    You import the scans by either dragging them into Pages or by going Menu > Insert > Choose…
    Peter

  • Pages 5 document will no longer open in pages 5

    I upgraded to Mavericks a few days ago and afterwards, I had both Pages '09 and Pages 5 in my dock, instead of one of them being in the applications folder. They are both still in my dock. I have looked briefly at Pages 5 and determined that, at this time, I prefer Pages '09. All of my documents were created in Pages '09 and now they will no longer open in Pages '09. (Some will, and I don't know what the difference is between the ones that will and the ones that won't) When I try to open one, it either opens, no problem, or I get the message "The required index.xml file is missing." This message is in a rectangle with an icon representative of Pages '09 (the inkwell). Since it has this icon, I'm assuming that I was trying to open it in the Pages '09 version, which is what I intended o do. Since this didn't work, I tried to right click and "Open with Pages.app (4.0.5)" and got the same message. I was a little afraid to try to open it in Pages 5, since I've heard rumors that this could ruin the document. I would like to be able to use either of the apps but, since I apparently can't do that, I gathered my courage and opened a document in Pages 5. Everything seemed to be okay, so I opened a couple more. One of them, I even was able to edit with no problem. But when I tried to open it again hours later, I got an error message saying ". . . can't be opened because it is from an "unidentified developer". What's going on here? The only people involved in this document are Apple and me. What "unidentified developer" are they talking about? And why was it fine, then a few hours later it was not accessible? If I'm forced to use only Pages 5, I guess I can live with that, but it seems as though I will have to live in constant fear that, at any time, my document will not open. I've read about a lot of other people who are having problems, too, but not this particular one. I'm at a loss and, like everybody else, I have important documents that I need access to. I'm using an iMac and 10.9.4. What to do?? I need my stuff!

    1. You have allowed Apple to auto-upgrade your Mac
    Turn off auto-update here:
    Menu > Apple > System Preferences > App Store
    2. The Icons on your dock are Aliases not real apps
    They point to where the apps really are which is:
    For Pages 5.2.2 in your Applications folder
    For Pages '09 in your Applications/iWork folder
    3. You are alternately opening documents randomly with either version of Pages
    Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
    right click on the file and choose which version you want to open it
    4. Pages '09 can not open Pages 5 files
    Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
    It will also auto save opened files into its own format.
    You can export these back to Pages '09 if you need to:
    Menu > File > Export > Pages '09
    5. Yes Pages 5.2.2 is a marked downgrade
    Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
    Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
    For further information about what has happened:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
    Peter

Maybe you are looking for

  • ST05 doesn't work : can't open trace file

    Hi, I am used to work with ST05 for years, but today, the trace DOESN'T WORK !! The trace activation and deactivation seem okay, but display triggers the following 2 errors : "File end of performance trace file detected -> See long text" (message 0S1

  • Xi adapter framework

    hello I have a scenario RFC 2 WS sync and the message does not leave the XI to the WS. the message that I see in the sxmb is   <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!--  Call Adapter   --> - <SAP:Error xmlns:SAP="http://sap.com/

  • How to create user in Express database through express command

    Hi In our application we need add/delete new user to the OFA. Is there any way of doing this through the automated express.? Is there any Express command to add new user ? If so,Please let me know how to do that. Thanks Murugesan

  • Can I install onto an external hard drive + run off it?

    Can I install onto an external hard drive + run off it? If possible, will the system run at the *same* speed as the built in hard drive? ALSO: Am I correct in saying that if I replace my current hard drive with an SSD one? If so: that *****   Thanks

  • QT 7.2 VOLUME DEAD & CHOPPY

    Things were running swimmingly, and then the volume completely stops working, stuck on the highest setting but muted. Also, the video pauses every so often and I have to click the time marker to egg it on. Any similar problems?