Document became corrupted after any editing and saving it using Excel

I have quite a simple document which can be opened by Excel, edited, but after saving became corrupted (no longer possible to open it on the same PC). I tried editing on copies of this document on 3 different PC's with the same result - so the problem is
in a document, but why Excel behaves in a such unfriendly way? If document is initially corrupted it should not be possible to spent time on editing it and then lost all the work done together with a document itself....
The document is shared there: https://drive.google.com/file/d/0B1nYSke1KSW0RVlEbmJlSE5IUzA/edit?usp=sharing

Hi,
Which Excel version are you using? Based on my tested in my environment (Excel 2013&Windows8.1 and Excel 2010& Windows 7), I can re-open the file which your shared after editing/saving it.
Do the three PCs have the same Excel version and operation environment? If the issue only occur in this file and the other file work well, I recommend we copy all of the content to the new/blank file to test.
If you got the error message like: The file is corrupt and cannot be opened", please try the following methods:
1. Open Excel 
2. Click on File > Options.
3. Select Trust Center > Trust center settings.
4. Select Protected view.
5. Uncheck all the options under Protected View > OK.
6. Restart Excel and try to open Excel documents.
If the issue occurs in all files with three different PCs, I recommend we repair Office programs.
George Zhao
TechNet Community Support

Similar Messages

  • After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    Hi,
    Please take a look at one of the following documents to see if it answers your question about finding the files that are locally stored on your device.
    For iPads & iPhones
    How to manage files in Acrobat DC for iOS
    For Android devices
    How to open PDFs on Adobe Acrobat DC on Android
    Please let us know if you have additional questions.

  • Imported images from my iPhone became corrupted after importing.

    I Imported images from my iPhone and they became corrupted after importing. They appeared fine just after import, so I unfortunately erased my phone. When I reopened the aperture project where they were stored they had streaks, some were only partially visible, and others had no image just an exclaimation point with the words "incompatible file". thanks in advance for any suggestions or help.

    What you describe are very typical symptoms: You import; the images look to be o.k.; you go ahead and delete them. The problem is that during the import you only see the previews created by your camera, not the actual images you are importing. When you afterwards try to edit or to enlarge the images Aperture will recreate its own, better previews and needs to access the original master image files. If Aperture cannot find the master image files or cannot open them, you may see warnings (unsupported) or corrupted thumbnails. Only then you will notice if the images have been imported correctly, and that may be too late, if you deleted the images from your camera.
    How did you import? Are the imported master image files managed or referenced, i.e. included in the Aperture Library or referenced outside?
    I'd suggest you look directly at the master image files to check if they are o.k. and can be read by other applications.
    If your master image files are managed you'll find the images in the Aperture Library by right-clicking the Aperture Library package and selecting "Show Package Contents". Then Browse the folder "Masters". The master image files are stored in subfolders organized by the date of the import session.
    If your master image files are referenced, open the folder where you told Aperture to move them to.
    Check for two things:
    Have all your images really been imported?
    What is the  format and the state of the images? Try to open the images with Preview, or any other image editor you have and check if they really are corrupted, or if only Aperture has a problem to access them.
    If all your images are there, but Aperture cannot access them, your Aperture library may need fixing.
    Back up your Aperture library (just a precaution) and use the Aperture Library First Aid Tools to repair the permissions or/and to repair the database; see this section of the Aperture 3 User Manual on how to do that: Repairing and Rebuilding Your Aperture Library
    If repairing and rebuilding did not help, but you found the original masters and can read them, then copy them to a location outside Aperture and try to convert them to another file format with Preview or another application that can read them. Then try again to import those files to Aperture.
    Post back, if you have more questions.
    Good Luck
    Léonie

  • Word document became corrupt when attempting to append...

    I'm going crazy here. I'm using RoboHelp 4.1 and I am having
    an issue with trying to create printed documentation. I was
    receiving the error message, 'The Word document became corrupt when
    attempting to append a malformed topic.' Then it would say failed
    to update 'topic name'. So in trying to fix it I deleted the entire
    folder which contained the file where it blew up, and tried
    recompiling it. It went past the point where I had removed the
    folder and blew up on a topic in the next folder and gave the same
    error...so I deleted that folder also. Now it will make it entirely
    through the printed documentation process....but at the end of
    compiling it, it tells me Failed to Update images....but at least
    now it will give me a finished document (it just has a bunch of
    dead linked images). Is this an issue that would be cured with an
    upgrade to X5 or is this something else that I have not thought of
    yet? Any help will be greatly appreciated.

    Hi, jdammen.
    The first thing I suggest is a search of the forums on the
    word "malformed" - you are not alone! Seems like the problem can
    have multiple causes: one bad topic, a bad style in the CSS, not
    enough RAM, some kind of weird invisible running corruption...
    The solutions offered seem to fall into general categories -
    1) generate with half the topics, then a quarter, etc. to narrow
    down and kill the bad topic, 2) change all styles to Normal and see
    if printdoc generates correctly, 3) take a copy of the project and
    restore it from .hhp (see
    Peter Grainge's website for
    help), 4) start over.
    I'm afraid they all have one thing in common - trial and
    error. You're just going to have to slog through this.
    BTW, this happens in X5 - I don't think an upgrade will be a
    quick solution for you.
    Sorry, and good luck.
    Elisa

  • Photoshop bug: Smart Objects overwriting other Smart Objects when edited and saved in Illustrator

    Experiencing issues when working with a large number (over 200) vector smart objects brought into Photoshop CS4 from Illustrator. 
    Things seemed to be going along nicely; if I needed to edit a Smart Object, I could double-click it, it would open in Illustrator and then I could edit and save it.  Return to Photoshop and the Smart Object is updated.  Swell and dandy.  The issue started happen when I hit a large quantity of either vector smart objects (remember, over 200) or the many layers and groups within Photoshop (must be over 500).  When I would double-click, open, edit, and save the vector Smart Object, the Photoshop Smart Object I was working on would update AND another/several other Smart Objects would update as well.  Which, of course, would ruin the artwork, as suddenly I was seeing several instances of the same object.  If it hadn't have been for ForeverSave, I many not have recovered the work.
    It's rather hard to isolate the issue to see what's causing the problem.  Here are some of the possible causes:
    Running Snow Leopard on Mac
    Many, many Smart Objects in file, perhaps enough to ruin the naming convention and cause bugs when Photoshop referenced the temp file
    Many, many Photoshop layers and groups
    Illustrator vector files copy+pasted from several different files (affects the naming convention perhaps?)
    Some groups/layers in Photoshop are duplicates
    To help make it a little clearer, you should know:
    Running the most updated software / OS (that is until CS5 comes out)
    Smart Objects showed no error until I had actually opened, edited, and saved the referenced temp file (i.e. VectorSmartObject1.ai)
    Files saved and worked on from Dropbox (network folder)
    Not looking for much of an answer to this question; I just wanted to see if anyone else had come across this bug.  Also, Adobe PLEASE look into this as you begin testing for the next update.  I have the file(s) if you need to replicate the issue.  My best guess is that the naming convention of Vector Smart Objects has an odd character limit so when Vector Smart Object 200.ai is saved, Vector Smart Object 2.ai gets overwritten.

    Have you tested this with Photoshop CS5 and Illustrator CS5? (the current versions, that came out last month)
    If you duplicated a smart object layer, both layers refer back to the same file content. So when you change the file, both layers would be updated.  That is intentional and explained in your manual.  If you didn't realize this, that could explain what you are seeing.
    If you placed separate files, then they should not be updated at the same time, because they will refer to separate files.
    Yes, Smart Objects only update when you save the file.
    You would need over 4 billion smart objects in one document to get Photoshop confused about which one refers to which file.  And since the layer limit is much less than 4 billion, I doubt that is the cause.
    There is no naming convention involved. We don't limit the filenames (except to platform standards and to include a file type extension).

  • External editing and saving

    For some reason pictures that I have edited in photoshop are no longer being saved to aperture. Before when I finished editing and saved an image it automatically went to the place where it was filed in aperture before I edited it. I am sure I have changed no settings and suddenly it stopped saving properly. I don't know how to get it set up to save the way it used to. Can anybody help? I have a project due and I can't seem to get past this.
    Thank you.

    This is probably not going to be any help, but just in case...
    Are you at any point in your Photoshop editing work saving the file with a new or revised name -- intentionally or otherwise? And then not saving to a separate Finder file from which you can subsequently import that "new" (from Aperture's perspective) image into your Aperture Library, as either a Managed or Referenced file (depending on your workflow)?
    I ask only because I frequently find myself creating a whole new file from versions of images I've sent to my External Editor (i.e. Photoshop) from Aperture -- an example being when I create a Photomerge. But also sometimes I end up wanting to save two different versions of the file while still in Photoshop. For those situations, I've created a folder on my Desktop called PICS TO IMPORT, and it's to that folder that any of those new or "Saved As" PS files get sent. Then, back in Aperture, I import those new PS files, (in my case using the "Move Files" option so they are placed into the correct sub-folders in my MASTER IMAGES folder, which my Aperture Library then references).
    The only thing I have to remember (and which I occasionally forget when I'm in a hurry) is to navigate to that "PICS TO IMPORT" folder in Photoshop's Save dialog BEFORE saving the new/revised file for the first time, otherwise it will be saved by Photoshop to the default location, which is deep within that MASTER IMAGES folder (wherever the files reside which Aperture used to create the original Exports for the External Editor). That means when I return to Aperture, I can't see the new PS file, since I still haven't officially imported it yet.
    Whereas if I just send a jpg from Aperture to my External Editor, and simply keep saving that new .psd version "as is" in Photoshop (no changes or revisions to the file name), then every time I flip back to Aperture, all my Photoshop revisions (up to my last save in PS) are reflected in the .psd file now residing in a Stack right next to the original jpg which "gave birth" to it.
    Again, I've no idea if any of this is even germane to the problem you're having, but I hope maybe it might at least spark an idea.
    Good luck!
    John Bertram
    Toronto

  • A large portion of edited and saved material seems to have been lost in transit  this is time sensitive material that i need to find

    I have been editing and saving a project to the adobe cloud  when I tried to send it via the link all material was lost  and has so far not been recovered

    You really need to provide more information if you expect any help.

  • XML Creating, editing and saving! ;D

    Hey!
    So, here's what I want to do:
    When the users loads the Flash File, I want the ActionScrip to create an XML file that says:
    <id="000000" tutorial="no" name="000000" coins="3000">
        Now, I want the flash file to see that the user hasn't completed the tutorial.. and if it says NO it should load: tutorial.swf
    Then, once the tutorial.swf end, after the final button is clicked I want it to edit the XML file so that tutorial="no" is replaced with tutorial="yes" and it loads 'user.swf' And when the FlashFile is reloaded, it checks that the tutorial="" says yes, and it skips out tutorial.swf and it goes straight to user.swf..
    If it's not clear I'll show it below:
    Load tutorialcheck.swf
    If tutorial="" says no load tutorial.swf
    If tutorial="" says yes load user.swf
    Load tutorial.swf
    If tutorial is complete, on final button click edit XML and say tutorial="yes", then load user.swf
    Thanks!

    Hi
    Although not directly related to your problem, you can find an example of loading, editing and saving xml here.
    I have created a demo of Loading,Editing & Saving XML To/From Flash.
    You can find the Demo here http://demo.thefeldkircher.org/flashxml/xmlles/xmlls.htm
    You can find the How-To here http://blog.thefeldkircher.org/?p=262
    Hope it helps.

  • Editing and saving under PS touch Android

    Hi,
    I have a number of pictures of my students which I take with my tablets front camera in the classroom. Usually these pics are lacking of colour and contrast and I want to make upmthese pics using PS touch.
    Pictures are located in /storage/sdcard0/androclass/images
    I can select a picture in my galaxy note 10.1 file manager and open it in PS touch. I can also adjust colour contrast and the like. What I cannot do, however, is to save the picture in the very same location from where I have opened it.
    Thanks for your help!

    Hi.
    I`m haveing the same request. Please make it possible to export a picture without having to hassle with projects an exporting. I understand, that its your philosophy, but I need a completely different workflow: I don`t sta r t with an empty project, but I go through my picture of the last holiday an want to edit some of them. So from my gallery app I choose "edit" and from there use photoshop touch, which is great btw. Then I just need to save it with the same name an path. Maybe you could inculde a button like "fast export without saving project" and use the first imported image as a suggestion for the naming and directory. Btw this coukd also be a nice feature for the actual exporting function...
    Please do it!
    Greetings from germany.
    Michael

  • What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

    What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

    You can have a look at Quickoffice
    http://i1224.photobucket.com/albums/ee374/Diavonex/74fb0e85.jpg

  • .profile can't be edited and saved in pico

    there's no content in the .profile file if I type "pico ˜/.profile" in the terminal, and I can't edit and save changes to it via pico.
    The error message in pico is "Error writing ˜/.profile: No such file or directory". But this file actually exists and has contents in it. 
    I can only edit and save .profile using Sublime Text editor. And this can be performed on another iMac of mine.
    May I ask why?
    Thanks!

    pico .profile
    or
    pico ~/.profile

  • How do i delete everything off my iphone 6 before i send it off to get repaired after water damage and can't use it

    how do i delete everything off my iphone 6 before i send it off to get repaired after water damage and can't use it

    If it does not respond when plugged to a computer running the latest version of iTunes, then it is indeed dead and no content will be recoverable.

  • I edit and rotate photos using MS Photo Editor. when open with Apple TV- photos still have 90 deg rotation. Why ?

    I edit and rotate photos using MS Photo Editor.
    When open with Apple TV- photos still have 90 deg rotation. Why ?

    Does this have anything to do with iPhoto for the Mac? If so please descrive what and exaclty wha tryou are doing
    LN

  • I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac

    I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac.

    How did you purchase Lightroom? Download? Package?
    Have you followed the instructions to verify that you qualify for academic discount?

  • Where are my photos in Lightroom after I have edited and saved them in Photoshop?

    I'm using LR and Photoshop CC. When I export a photo from LR to edit in Photoshop and then save it in PS and close the file why doesn't the saved file appear next to the original file? I know it's in Lightroom somewhere, but I always have to close LR and reopen it before the edited file will show up in Lightroom next to the original file with the same keyword. What determines where the file will be located within the list of files with a particular keyword. It seems to depend on which external editor I use. Sometimes the edited file is not shown with the original until I close and re-open Lightroom, sometimes it will be at the end of the list of files with that keyword and for some external editors it will immediately show up next to the original file.

    Anyone looking? Or has everyone given up on solving this problem. Apparently, most don't have this problem but no one knows how to solve or why it happens. Others have had this or very similar problems and no one has found an answer. Adobe just ignores my queries about this as is normal for them.
    When I select photos in LR and Export to Photomatix Pro to create an HDR photo the saved result appears immediately next to the original files in LR. When I select the photos in LR and go to Photo > Edit in >Merge to HDR PRO in Photoshop the resulting photo does not appear next to the original files even though LR says they are in the catalog. After I close and reopen LR they will be there next to the original files. Photoshop is the only editor where I have this problem. When I use any other editors such as those by OnOne, Topaz, Photomatix Pro, process a file and save the new files shows up immediately in LR right next to the original file. When I process a file in Photoshop and Save it I notice the filmstrip in LR jumps but the saved file from PS doesn't show itself until after I close and reopen LR.
    AAARGH!

Maybe you are looking for