Document body text in email, when you are sending the PO by email

Hi
I folowed the note 191470 and sending PO by the mail works fine.
I just doesn't have nothing in the body text in the e-mail...  I created the text at the output type, but I don't get nothing,
Any tip?
Thanks in advance
BR
Saso

Hi SF,
Your settings look correct,The Notify step should work fine.
Still you can refer the below link ,which will guide you in detail on how to use the Notify step in MDM Workflows.
I have used the Notification step in MDM workflows in the SP06 version and it works fine.I am not quite sure whether this will will work in the SP05 version.
Even after all the correct settings if it does not work as expected ,then i guess it should be a version problem.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90efe90c-b03f-2b10-65bf-e572fef651cb  (email notification in wf)
The main reasons why the notify step may not work are:
Check for the following:
- The mds Settings are correct and mention the IP of the server instead of the Name.
- All the users to whom notification have to be send must have to complete email ,mention in console.
- Try Restarting the MDM server once after configuring the MDS.ini file
Hope It Helped
Thanks & Regards
Simona Pinto

Similar Messages

  • What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.

  • HT1461 For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    Why don't you  (generic most every post lacks critical details) be clear and say you never used Mac OS etc.
    But, I did try to anticipate and give you what you needed.
    Excel is one of those rare programs that, if they are extremely large complex spreadsheets still tend to run better under Office for Windows.
    A VM won't do for that but it does make it easier to transition. As in: install Windows natively, then use VMware Fusion or Parallels to attach to the partition and OS. That way you can run Windows as Guest OS VM under Mac; and still run Windows natively dual-boot when needed.
    The word "see" was not what you wanted, was it? really? you want to open and make changes and keep it on Windows side rather than Save As or copy to Mac
    You use Windows and don't know it has NTFS (NT FileSystem)?
    http://en.wikipedia.org/wiki/NTFS
    http://en.wikipedia.org/wiki/Hierarchical_File_System (HFS) native file system used by Apple
    And there is much more UEFI style "bios" and other things I suppose.
    Great thing about Google and encyclopedias or dictionary, you can look up what you don't know.

  • HT1435 how long does the recycle program take or do they give you an ipod straight away when you are at the store.when you buy from the store do they do free ipod engraving

    how long does the recycle program take or do they give you an ipod straight away when you are at the store.when you buy from the store do they do free ipod engraving

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • How do you know when you are using the internet?

    If I am using an app that requries internet, and I press the middle button to get out of it am I still using part of my data plan?

    While you are using the app if you are not on WiFi you are using the internet. If the app is one of the few that can run in the background you need to close it to stop it from using your data plan. Double click the home (middle) button, hold down your finger on the app, when you see a red circle with a dashed white line next to the app icon tap it, press the home button.

  • Do you send the real traffic or a copy when you are using the CWS service and where are the datacenters located ?

    Hi, when you redirect traffic to the CWS service for scanning, do you redirect the real traffic this way or is it a mirrored copy of the traffic ?
    If all traffic is redirected to the Cloud, where are the Cisco datacenters located. Good to know I guess, since you don't want to avoid to much of latency
    /Jan

    Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

  • How do you view your ipod when you are using the remote?

    Every once in a while me and my freinds will be hanging out, and im sure youve all experienced the "oh let me show you this song!!". since we are far away and the ipod is plugged into the computer, the remote is the best option, but how can i get the ipod to even show up on the remote menu, or even to just become a part of the library?
    thank you!

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • How do you update a re occuring event in ical when you are sent the update from the organizer?

    I have accepted an event and then I receive an update to that event and I cannot update ical by double clicking the mouse, or using the quick look function or right clicking the mouse to open the event in iCal to update it...any sugesstion?

    Hi Xalell,
    Check out this thread it should tell you what you want to know.
    How to edit category selection menu on the transactions sheet of Personal Budget template?
    quinn

  • How can you match an existing color when you are using the Hue/Saturation adjustment layer?

    Hi, I have a student who wants to match the color of a new layer to the exact color of an existing layer. He is using an adjustment layer to "eyeball" the color match, but is there a way to ensure that the match is perfect?

    Depends, John.
    If you're able to create a reasonable selection via Color Range, feathered masking, etc, then by matching one specific color, you'll also be correcting for that entire range of hue. It might have been needed anyway...or you use a color filter to correct the whole image, if it's needed.
    As we all know, each image presents its own specific challenges and solutions.

  • HT4623 App store prompt us to update the the existing games app, but when you are in the update page, it not allow you to do update, it shown blank page. pls help

    why the app store update page is blank, whereby it prompt us to update the app.  cannot update at all

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before.

    I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
    If the Customer run the solution to get the PDF we found in the ULS log following entry:
    03/07/2014 12:07:20.69  w3wp.exe (0x0B10) 0x18EC 
    SharePoint Foundation General                        90hv Unexpected 
    Detected use of SPRequest for previously closed SPWeb object.  Please close SPWeb objects when you are done with all objects obtained from them, but not before.  Stack trace:    at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
    source, String defaultResourceFile, UInt32 language)     at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict()     at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
    bThrowException)     at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException)     at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)    
    at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)    
    at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)    
    at ECM_PDF_Excel.PDF.Create()     at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
    03/07/2014 12:07:20.69* w3wp.exe (0x0B10)                        0x18EC SharePoint Foundation        
     General                        90hv Unexpected ...lags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
    flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)   e918ecd4-7ed6-44bb-9e4f-d764586a2f79
    We check the method
            /// <summary>
            /// Returns the ECOs in a Dictionary: ECO Number, Suffix
            /// </summary>
            /// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
            /// <returns>Dictionary ECO Number, Suffix</returns>
            public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
                SPSite siteContx = SPContext.Current.Site;
                SPWeb webContx = siteContx.RootWeb;
                Dictionary<string, string> listECOs = new Dictionary<string, string>();
                string ecoNumber = string.Empty;
                string ecoSuffix = string.Empty;
                if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
                    ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
                else
                    return listECOs;
                // Ich suche die ECO Nummber bei gegebener ECR Nummer
                // Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
                SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
                if (dataList != null)
                    SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
                    foreach (SPItem dataListItem in dataListItems)
                        Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
                        Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                        if (relationECRColumnName != null && relationECOColumnName != null)
                            // Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
                            string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
                            string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                            // Get the List from variable listName
                            listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
                return listECOs;
    - What take we wrong?
    - How can we avoid this message?
    Regards
    Jonnyenglisch
    Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

    Here the code of GetECOsDictionary:
             /// <summary>
            /// Fill the dicionary with related ECO Numbers/Suffix
            /// </summary>
            /// <param name="searchedListName">String: the name of the list</param>
            /// <param name="ecoNumber">String: the ECO Number</param>
            /// <param name="relationECOColumnName"></param>
            /// <returns>Dictionary</returns>
            private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
                SPSite siteContx = SPContext.Current.Site;
                SPWeb webContx = siteContx.RootWeb;
                Dictionary<string, string> listECOs = new Dictionary<string, string>();
                SPQuery oQuery = new SPQuery();
                oQuery.Query = "<OrderBy>" +
                                    "<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
    +
                                "</OrderBy>" +
                                "<Where><BeginsWith>" +
                                    "<FieldRef Name='" + "Title" + "'/>" +
                                    "<Value Type='Text'>" + ecoNumber + "</Value>" +
                                "</BeginsWith></Where>";
                SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
                foreach (SPItem searchedListItem in searchedListItems)
                    // Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
                    string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
                    string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
                    if (ecoNumber == splitECONumber[0])
                        ecoNumber = splitECONumber[0];
                        if (splitECONumber.Count() == 1)
                            listECOs.Add(foundECONumber, "0");
                        if (splitECONumber.Count() > 1)
                            listECOs.Add(foundECONumber, splitECONumber[1]);
                return listECOs;
    Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

  • When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box, for a specific area on the page...instead of it going on in one straight long line...?

    When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.

    Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
    Thanks,
    Josh

  • Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

    Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben  [email protected]

    Hello Trevor
    Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
    Ben

  • ItemFocusOut called twice when you are using datagrid

    Have you ever encountered itemFocusOut called twice when you
    are using datagrid. I use this event to check the text that has
    been entered.
    Also when I use regex expressions
    if((event.itemRenderer as TextInput).text.search(new
    RegExp(/.*\..*\./)) != -1){
    in the itemFocusOut method and someone enters
    234.34.234
    I get an error
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    at
    mx.controls::DataGrid/destroyItemEditor()[C:\autobuild\3.2.0\frameworks\projects\framewor k\src\mx\controls\DataGrid.as:4000]
    at
    mx.controls::DataGrid/itemEditorItemEditEndHandler()[C:\autobuild\3.2.0\frameworks\projec ts\framework\src\mx\controls\DataGrid.as:4897]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at
    mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
    at
    mx.controls::DataGrid/endEdit()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\c ontrols\DataGrid.as:4041]
    at
    mx.controls::DataGrid/mouseDownHandler()[C:\autobuild\3.2.0\frameworks\projects\framework \src\mx\controls\DataGrid.as:4296]
    Could some be so kind as shed some light on this
    situation

    I've worked around the error. I had something to do with the
    fact that the event was being twice and I worked my handling code
    around to avoid the error. However the problem with the event still
    remains. I think it is because the data it in the grid is being
    refreshed intentially after the code in the itemFocusOut is called
    that is cause the second event to fire.

  • How the upgrade to Creative Cloud happens when you are already a signed member of Typekit?

    Hello everybody. I have a signature for Typekit. When I purchase a Creative Cloud the price I had payed is discounted? How the upgrade to Creative Cloud happens when you are already a signed member of Typekit?
    Thanks

    Hi rogeriovelloso,
    This page explains how your Typekit account may change if you sign up for a Creative Cloud subscription:
    http://help.typekit.com/customer/portal/articles/529513-link-an-existing-typekit-account-t o-a-new-creative-cloud-subscription
    Please let me know if you have any other questions, here or at [email protected]!  Best,
    -- liz
    Typekit Support

Maybe you are looking for