Document Browser: Possible to start from a certain folder?

Hi,
in some cases it would be rather helpful if the document browser tab would open a certain folder in the whole structure.
E.g. User is displaying a DIR in CV03N where he/she can see that this DIR is a folder. When the user now jumps to the doc browser tab he/she should directly see the sub folders and not the top folders (private and public root).
Any ideas how to influence the doc browser tab?
Kind regards
Alex

Hi Alex,
please see if note 968312 is usefull here. This should keep the Browser expanded if you go back.
Best regards,
Christoph

Similar Messages

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

Portege P3500: It's possible to start from USB-stick?

Is it possible to start from usb-stick? i have tried to make a bootable usb-stick , and it really worked on my pc at home , but not on the laptop ..bios settings are ok , as far i know (usb-fdd legacy enable , first boot device fdd)
where is the problem ?

Try to update bios. Even though it has that option does not mean that it will. Make sure in BIOS that legacy emulation is enabled as well. Then connect your USB and turn on the computer. Go into bios and check to see if your USB keystick is located under boot devices, which it should be. Other then that, you might have installed the boot program wrong. CD's etc have a boot.ini file. Basically an ini means initiate. So boot.ini initiates boot process. If this is configured wrong, or doesnt exist on the boot device you are using, it will not boot from the device even if configured in BIOS.

Outside in Viewer resets the page number to 1 always, even though the Word document has page numbering starting from different value.

Hi All,
I've a Word Document with page header having page number inserted.However the page numbers have been formatted to start from a value other than 1.
E.g. For a given word document, navigate to "File -> Insert -> Page number-> format page number -> start at " and set the value to say "300". Now insert page numbers, so that the page numbering of the 1st page starts from 300.
When this document is viewed using Outside-in Viewer, the page number of the 1st page always shows 1 instead of showing 300 (though this is not being reset/changed within the actual document)
I'm using Outside in 8.1.9 SDK for the same. Is there an API to set the page number correct (exactly what has been set within the original document) while viewing...
Alternatively confirm if this is a limitation within the Outside-in Viewer.
Thanks,
Badri

You're going to need to open an SR to Outside In Support, Product ID 2276.
Make sure you attach an example Word doc to the SR.

Is there a way to strip all tags from a certain folder?

My sister sent me a bunch of vacation photos, but she color tagged them. And her colors mean different than mine (for example, I use green for "B role" not "good picture"). Is there a way I can automatically remove all tags from a single filder (and sub-folders) named "Fall Trip"

No way of creating such a Smart Album that I could find...

Is it possible to start a web browser from with xterm (X11)?

Hello,
Would it be possible to start a web browser from xterm? I am able to use for example, dbca or netca. But I want to know if I could start a web brower in my xterm. Thank you.

Thank you. Firefox was not found on this redhat linux, I am guessing it was not installed. I did a find / -name firefox but not finding it. I don't think the SA installed GUI on this box. Is there a browser I can use even though GUI was not installed? That is why I am attempting to use xterm hoping to be able to access a brower in xterm. I am using Xming for xterm. Is there something in Xming I can use so I can access the Oracle Database Control Console? I can use firefox from my desktop but the port is block at the firewall and the SA would not open the port due to security reasons. Thank you.

Is it possible to run process chain from the certain process/point?

Hello
Is it possible to run process chain from the certain process?
How?
Thanks

Hello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala

Bi call document browser from web template wad 7.0

Hi,
Is it possible to customize the document browser dialog when calling via command "OPEN_DIALOG_DLG_DOC_BROWSER" from web template.
The iframe within the browser has a fixed size, so when opening a document the iframe is always too small and does not change the size, also when changing the size of the document browser window.
Is there a possibility opening the documents in a new window instead of opening in the iframe?
From WAD I have not found any possibility solving this. Maybe it's possible to change the web dynpro. Does anybody know the web dynpro / component for the document browser?
Regards,
René

You can only open 2004S Web Templates in 2004S EP. R u using EP to display ur web templates?
Check this blog for more details:
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
KJ!!!

Is it possible to start slideshow from current picture?

Hi,
is it possible to start slideshow from current picture?
Slideshow in Aperture always start from first picture in album.
There is possibility to select bunch of images and than start slideshow and slideshow will use only selected pictures but this is not what I want:
I want it to start from photo that I curently viewing in full scree.
I *do not want* to:
1. exit full screen
2. going to browser
3. than selecting rest of photos
4. than hitting shift+S for slideshow
I just want to hit shift+S and to slideshow starts right from picture that I curently looking.
I hope I was clear enought
Thanx in advance!

If you mean on the phone (like J2ME apps on a cellphone) then the answer is no. However, if you can run the application on the server, then of course.. you just need a way to send a request to the server (e.g. a softkey button which makes a call to http://your-server/path/yourApplication) which triggers the application and does god knows what.

Is it possible to save a data portion starting from when a "save" button is pressed?

Hi,
The below attached vi acquires data from a sensor. The sensor signal output can be reset to zero and the data saved into a file. However, the saved data comprises the data portion starting from when the vi starts running until the "stop" button is pressed. Is it possible to save the data portion starting from when the "save" button until the "stop" button are pressed?
Best regards,
Ninjatovitch
Solved!
Go to Solution.
Attachments:
Sensor Signal Acquisition.vi ‏52 KB

this should be in 8.2
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
RandomNumberSubVI.vi ‏8 KB
savefilewhenselected.vi ‏11 KB
f.txt ‏1 KB

Purchase requisition from sales document' not possible due to a credit bloc

hi experts,
i have to confirm delivery date and quantity for some purchase order items but i'm not able because i receive following message:
Subsequent function 'Purchase requisition from sales document' not possible due to a credit block'
Purchase requisition belongs to a sales order which has customer 10000.
The customer 10000 was block from FD32 but now i have unblock the customer from FD32, i have assigned customer to a category risk which is only a warning. (in OVA8 risk category 002 static check, reaction C, status/block uncheck )
There is any possiblilities to confirm quantity ?? I mean ... i understand that sales order was created when the customer was block due to credit limit exceded ... but now the customer is not blocked.
What should i do?
Thank you.

Hi Dan
If you want to confirm the delivery date then change the static check reaction to B . in OVA8 . But if you change the static check reaction to A , you can do Delivery and billing also
Regards
Srinath

Utl_file how to start reading from a certain position?

Hi all,
i'm currently using utl_file to read a text file and import to db. i have managed to do it. however i would like to avoid reading the first line as it is the header. i would also like to avoid the last line as it is the footer.
how do i use the function of get line to start reading at a certain position? i am also able to get the length but i do not know how to make it start reading from a certain position.
the length of the first line will always be 9 and length for the last line would be 51.
here's my code so far:
set serveroutput on
declare
vSFile   utl_file.file_type;
vNewLine VARCHAR2(4000);
file_name VARCHAR2(200) := 'read.txt';
v_exist     BOOLEAN;
v_length number;
blocksize   NUMBER;
temp_value varchar2 (4000);
BEGIN
vSFile := utl_file.fopen('MYDIR', file_name,'r');
IF utl_file.is_open(vSFile) THEN
    LOOP
      BEGIN
        utl_file.get_line(vSFile, vNewLine);
        IF vNewLine IS NULL THEN
          EXIT;
        END IF;
      EXCEPTION
        WHEN NO_DATA_FOUND THEN
          EXIT;
      END;
    END LOOP;
    UTL_FILE.FGETATTR('MYDIR',file_name,v_exist,v_length,blocksize);
    dbms_output.put_line(v_length);
    COMMIT;
END IF;
utl_file.fclose(vSFile);
END read_demo;

Hi,
utl_file has an fseek procedure for moving the file pointer around in a file, either absolute or relative number of bytes.
It's in the documentation, I'm surprised you didn't see it there when you looked before going to the hassle of asking us a question.
Andre

Scrolling with mouse wheel in column browser starts from the start of the list

Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
How can I fix this problem?
I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
I shall file a bug report.
tt2

Is it possible to start intel mac in target mode from ppc mac ?

Hello all,
Is it possible to start intel mac in target mode from ppc mac ? If so does using target mode make ANY change at all to the target disk if user doesn't voluntariliy write stuff to target disk ?
Thanks in advance !

Yes, you can, but with some notes. Braby sent some data, I add some other.
Target Mode has two basic roles:
1. to turn a mac into an external drive and/or external optical drive (if it has one, until Air era, all had); you may use this way if your internal optical drive is damaged and you wish to use the optical unit of the other mac; or use it as a simple external disk for backup purposes or else.
2. to boot from a such-booted mac.
#1 is usable with any two macs disregarding whether they are both PPC, both intel, or combination PPC-intel, as the behavior is like any external disk drive or external optical drive.
#2 is impossible if you want to boot the other mac, they must be both intel or PPC, as you cannot use an intel-based mac as a boot mac for the other ppc-mac, and vice-versa.
So said and clarified, you may use, but not if you intend to boot the other one if you wish to use it for various purposes implying boot.

Browse in Bridge fails to start from Photoshop CC

Why won't Browse in Bridge launch from Photoshop CC?

Just to make sure: Bridge is installed and opens if you start it manually?
Please read these and proceed accordingly:
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Document Browser: Possible to start from a certain folder?

Similar Messages

Maybe you are looking for