"Document cannot be edited at this time-"
In the process of editing a spreadsheet I have had there for several months now which I edit every week, the iCloud server must have done something strange and not synced correctly because the document I was working on is now not available and the work is lost. This only occured now with Apple's update of the iWork system. THIS IS VERY ANNOYING...
I have this same issue. I have been using this same spreadsheet for 10 months and now all of a sudden I can not update it. Is this something that is going to be fixed? Or should I be looking at rebuilding the spreadsheet again with a different spreadsheet program?
Similar Messages
-
This Data Object is currently in use and cannot be edited at this time
Hi,
I have a problem with one of my data objects in that when I try an edit it I get ‘This Data Object is currently in use and cannot be edited at this time’. I have tried everything from rebooting the machine. Any ideas?
RobertIf you have defined any plan or an alert on this data object , please disable them and try agian..
-
Mail cannot be enabled at this time wait a moment and the try turning on mail again
So my icloud and apple store account just stopped accepting my old password.
This included my iphone, apple tv, macbook air and my wife's ipad
I resent my password
Updated all the accounts and all seems to be good with the exception of the OSX Mail client
That seems to be an issue connecting to icloud
The following works and/or are syncing under System Preferences -> Mail Contacts and Calendars
Contacts
Calendars & Reminders
Notes
Safari
Photo Stream
Document & Data
Find My Mac
*I've never tried to enable Back to My Mac nor do I want to
Mail gives the following error: mail cannot be enabled at this time wait a moment and the try turning on mail again
I've enable my mail again by adding my icloud again as a separate account to Mail Contacts and Calendars
Weird thing is it only has mail and notes as options.
I know this fix is a temporary hack, and I'd like to get a permanent solution
I've also been checking my credit card linked to the account pretty obsessively to see if theres any issue on that end. No problems so far.
FYI - Running mountain lion and currently in Philadelphia
Message was edited by: vnitlaSorry, don't know how to delete the post.
Message was edited by: vnitla -
Adobe Epic_App cannot be launched at this time?
Hi there
I installed Adobe InDesign CS3 then CS4 today - when i open Adobe Acrobat Professional 8 - it says Adobe Epic_App cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Epic_App.
Even if i open an InDesign document - it still comes up with this message.
How do i fix this?
ThanksHi ,
I would like to inform you that this typically associated with a licensing error .You might want to refer the following document even though it is for Acrobat 9 .Please have a look and see if that helps.
https://helpx.adobe.com/acrobat/kb/error-epic-app-cannot-continue.html
Regards
Sukrit Dhingra -
Adobe Acrobat 8 Professional cannot be launched at this time - why?? Pls help!
Everytime I open a pdf I get the following message...
"Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional".
What does this mean?
I don't have Photoshop. Does that mean I need to get it to be able to look at pdf's?
Is there anything I can just download without having to buy it?
I have also just downloaded Adobe Reader 9.0, if that info helps?
Please help, I need to work on a pdf for work due tomorrow!!Hello,
When you try to open Adobe Acrobat 8 Professional, the application returns the error "Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional."
Please try to do one of the following solutions:
* Open another Creative Suite 3 application first.
*Open any other Creative Suite 3 application and follow the on-screen instructions to enter a serial number and activate your software. Then open Acrobat 8 Professional.
But if you have MAC OS - Move the Acrobat, Adobe PCD, and Adobe PDF folders.
Quit any Adobe applications that are open.
In the Finder, navigate to /Library/Application Support/Adobe.
Note: This folder path refers to the Library folder at the root level of the startup disk, not the Library folder that is inside a user's Home folder.
Move the following folders to your Documents folder or another safe location:
Acrobat
Adobe PCD
Adobe PDF
Important: Do not delete these folders.
4. Open Acrobat 8 Professional.
5. Enter your serial number when prompted.
Hope this one could help. -
[help me] Oracle 10G + ASM "ORA-00376: file 5 cannot be read at this time"
We have used Oracle 10G R2 RAC + ASM on Redhat 4 (EMC cx700 Storage)
I found below errors on alert log and can't inserted, updated and deleted datas in database.
Sun May 27 01:12:34 2007
SUCCESS: diskgroup ARCH was mounted
SUCCESS: diskgroup ARCH was dismounted
SUCCESS: diskgroup ARCH was mounted
SUCCESS: diskgroup ARCH was dismounted
SUCCESS: diskgroup ARCH was mounted
SUCCESS: diskgroup ARCH was dismounted
Sun May 27 01:19:11 2007
Errors in file /oracle/product/admin/DB/udump/db3_ora_15854.trc:
ORA-00376: file 5 cannot read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00376: file 5 cannot be read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00376: file 5 cannot be read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00372: file 5 cannot be modified at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
So:
I checked and recovered data file
SQL> select name,status,file# from v$datafile where status ='RECOVER';
NAME
STATUS FILE#
+DATA/db/datafile/undotbs3.257.617849281
RECOVER 5
RMAN> run {
allocate channel t1 type 'SBT_TAPE';
allocate channel t2 type DISK;
recover datafile 5;
recover completed.
SQL> alter database datafile 5 online;
Butttttttttttttttttt:
What is going on?
I checked EMC storage, not found any disk error.
I checked alert log of ASM, no found anything.
I don't know What the problem ?
Because I had the same problem 2 days ago.
This day error on undo datafile node 3.
2 days aGo; error on undo node 4.
Please please anybody
What bug or anything wrong ?
Please introduce me
trace file:
/oracle/product/admin/DB/udump/db3_ora_15854.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
ORACLE_HOME = /oracle/product/10.2.0/db
System name: Linux
Node name: db03.domain
Release: 2.6.9-42.ELsmp
Version: #1 SMP Wed Jul 12 23:32:02 EDT 2006
Machine: x86_64
Instance name: DB3
Redo thread mounted by this instance: 3
Oracle process number: 65
Unix process pid: 15854, image: [email protected]
*** SERVICE NAME:(DB) 2007-05-27 01:19:11.574
*** SESSION ID:(591.62658) 2007-05-27 01:19:11.574
*** 2007-05-27 01:19:11.574
ksedmp: internal or fatal error
ORA-00376: file 5 cannot be read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00376: file 5 cannot be read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00376: file 5 cannot be read at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
ORA-00372: file 5 cannot be modified at this time
ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
Current SQL statement for this session:
INSERT INTO DATA_ALL VALUES (:B1 ,:B2 ,:B3 ,:B4 ,:B5 ,:B6 ,:B7 ,:B8 ,:B9 ,:B10 ,:B11 ,:B12 ,:B13 ,:B14 ,:B15 ,:B16 ,:B17 ,:B18 ,:B19 ,:B20 ,:B21 ,:B22 ,:B23 ,:B24 ,:B25 ,:B26 ,:B27 ,:B28 ,:B29 ,:B30 ,:B31 ,:B32 ,:B33 ,:B34 ,:B35 ,:B36 ,:B37 ,:B38 ,:B39 ,:B40 ,:B41 ,:B42 ,:B43 ,:B44 ,:B45 ,:B46 ,:B47 ,:B48 ,:B49 ,:B50 )
----- PL/SQL Call Stack -----
object line object
handle number name
0x21dc2b4b8 780 package body MGR.AC
0x21e4815b0 3 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+31 call ksedst1() 000000000 ? 000000001 ?
7FBFFF7290 ? 7FBFFF72F0 ?
7FBFFF7230 ? 000000000 ?
ksedmp()+610 call ksedst() 000000000 ? 000000001 ?
7FBFFF7290 ? 7FBFFF72F0 ?
7FBFFF7230 ? 000000000 ?
ksupop()+3581 call ksedmp() 000000003 ? 000000001 ?
7FBFFF7290 ? 7FBFFF72F0 ?
7FBFFF7230 ? 000000000 ?
opiodr()+3899 call ksupop() 000000002 ? 000000001 ?
7FBFFF7290 ? 7FBFFF72F0 ?
7FBFFF7230 ? 000000000 ?
rpidrus()+198 call opiodr() 000000066 ? 000000006 ?
.......etc.............................
Message was edited by:
HunterX (Surachart Opun)To me it looks like your undotbs on node3 is filled and not marking old undo as expired. Use this query to find out if it is labeling old undo as expired.
SELECT tablespace_name, status, COUNT(*) AS HOW_MANY
FROM dba_undo_extents
GROUP BY tablespace_name, status;
Another thing I noticed from your alertlog is it is only doing that on undotbs3, which I assumes is on node3.
1) try recreate undotbs on node3
2) take node3 out of service (stop nodeapps, ASM, instance and finally CRS on node3) and see if you can do DML on your database.
-Moid -
Solar01 "Message no. SOLAR_DOC020" The document cannot be edited
Hi!
I am configuring the business processes via SOLAR01 and receive the error "The document cannot be edited" Message no. SOLAR_DOC020.
It is also not possible to load the templates.
<b>Has anyone experience by solving this problem or some useful SAP note?</b>
Thank you very much!
regardsHi!
I think it does not connection with the GUI version, because I cannot edit the Word-documents in the transaction SOLAR01.
I can edit .txt-files, but I cannot edit the .doc-documentas.
I have SAP GUI 7.10
Thank you! -
ORA-00376: file 2 cannot be read at this time
Hi,
Our SAP system is down. When checked I found PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
So I have created another tablespace PSAPUNDO2 and altered the system.
SQL >create undo tablespace PSAPUNDO2 datafile 'D:\Oracle\SOL\sapdata1\undo_2\UNDO.DATA2' size 700MB;
SQL>alter system set undo_tablespace=PSAPUNDO2 scope=spfile;
I have changed undo_management to Manual. And I have not dropped old tablespace PSAPUNDO yet,
I have restarted the system and initially the database was not open.
I gave command alter database open and opened it.
The oracle has been started normally. But still SAP instance cannot be started.
Last few lines of aler log:
Sun Jan 06 04:05:12 2013
Completed: ALTER DATABASE OPEN
Sun Jan 06 04:06:08 2013
Shutting down archive processes
Sun Jan 06 04:06:13 2013
ARCH shutting down
ARC2: Archival stopped
Adjusting the default value of parameter parallel_max_servers
from 160 to 65 due to the value of parameter processes (80)
Sun Jan 06 04:06:29 2013
Starting ORACLE instance (normal)
Sun Jan 06 04:14:09 2013
Errors in file d:\oracle\sol\saptrace\background\sol_smon_3796.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
Now when i give command:
show parameter undo, I got the table_space name as PSAPUNDO2.But if I give command
SQL> select segment_name,owner,tablespace_name,status from dba_rollback_segs;
I am getting PSAPUNDO as the tablespace insteadof PSAPUNDO2. PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
Also
In BRTOOLS, in show tablespace command I cannot see the new tablespace PSAPUNDO2.
Kindly suggest how to resolve this issue.Hi,
Thanks for your reply. When I checked SAP down issue(around 6th Dec) I had exteneded the tablespace PSAPUNO and PSAPSR3 with brtools and restarted the server.
Then I checked further and found the problem was PSAPUNDO needs recovery.
Then I created another tablespace PSAPUNDO2 and altered system. (See my previous post).
Now as you told I checked alert log history to check when the problem started and found the following:
Incremental checkpoint up to RBA [0x2aad.15fb6.0], current log tail at RBA [0x2aad.15ff4.0]
Sun Dec 02 19:01:16 2012
Beginning log switch checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
Thread 1 advanced to log sequence 10926
Current log# 2 seq# 10926 mem# 0: D:\ORACLE\SOL\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 10926 mem# 1: C:\ORACLE\SOL\MIRRLOGB\LOG_G12M2.DBF
Sun Dec 02 19:06:21 2012
Completed checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
Sun Dec 02 19:25:04 2012
Incremental checkpoint up to RBA [0x2aae.2d36.0], current log tail at RBA [0x2aae.2e11.0]
Sun Dec 02 19:30:00 2012
KCF: write/open error block=0x19 online=1
file=2 D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
error=27072 txt: 'OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.'
Automatic datafile offline due to write error on
file 2: D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
Sun Dec 02 19:30:01 2012
Errors in file d:\oracle\sol\saptrace\usertrace\sol_ora_5408.trc:
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
ORA-00376: file 2 cannot be read at this time
I am not sure what caused this error: ORA-00376: file 2 cannot be read at this time
I think there is no issue with Parallel_Max_Server as I can see its entry in Alert log since 2007.
Thu Oct 25 20:48:48 2007
Adjusting the default value of parameter parallel_max_servers
from 160 to 65 due to the value of parameter processes (80)
Thu Oct 25 20:48:48 2007
Starting ORACLE instance (normal)
Will wait for your reply.
Edited by: 980149 on Jan 6, 2013 9:32 AM -
ORA-00376: file 201 cannot be read at this time
How can i resolve this?
SQL> alter database tempfile '/home/oracle/product/oradata/ora01/temp01.dbf' resize 10g;
alter database tempfile '/home/oracle/product/oradata/ora01/temp01.dbf' resize 10g
ERROR at line 1:
ORA-00376: file 201 cannot be read at this time
ORA-01110: data file 201: '/home/oracle/product/oradata/ora01/temp01.dbf'Hi
If you have created a new TEMP Tablespace and dropped the old temp tablespace , then you will have to use the follwoing command to make use of the old temp files in the new temporary tablespace.
alter tablespace <new temp tbs name > add tempfile '<old tempfile name>' reuse;
To autoextend the tempfile :
alter database tempfile '<tenpfile name>' autoextend on;
Regards,
Akash
Link : [oracledreamz.blogspot.com]
Edited by: akash@otn on 28 Mar, 2009 12:58 AM -
ORA-00376: file 29 cannot be read at this time
Hi Guys,
I am running Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production on RHEL5.
I had mny files on auto-extend now my mount point went to 100%.
I had a problem with some of the files that were on that mount point.
I managed to can increase the mount point. Now I want to recover those files as their status is RECOVER.
But when I do recover datafile 'file_name'; I get this error:
ORA-00376: file 29 cannot be read at this time
How do I make sure that the files are readable again?
Please help!!!!!!!!!!!Go through your alert.log . File 29 would have been taken OFFLINE by Oracle at some time and a message would have been written to the alert.log
You can
ALTER DATABASE DATAFILE 29 ONLINE;
ALTER DATABASE RECOVER DATAFILE 29;Hemant K Chitale -
ORA-00376: file 24 cannot be read at this time
Hi,
DB 10.2.0.4
AIX 5.3
PROD
When i am trying to start database i got below error.kindly suggest me.
SQL> startup
ORACLE instance started.
Total System Global Area 5368709120 bytes
Fixed Size 2091632 bytes
Variable Size 2399143312 bytes
Database Buffers 2952790016 bytes
Redo Buffers 14684160 bytes
Database mounted.
ORA-00376: file 24 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/undo_.dbf'
Thanks
Edited by: user13382934 on Apr 21, 2011 2:05 PMIn trace file find below
ORA-00376: file 27 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
Parallel Transaction recovery caught exception 376
Parallel Transaction recovery caught error 376
*** 2011-04-21 19:09:26.615
SMON: following errors trapped and ignored:
ORA-00376: file 27 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
Parallel Transaction recovery caught exception 376
Parallel Transaction recovery caught error 376
*** 2011-04-21 19:09:27.633
SMON: following errors trapped and ignored:
ORA-00376: file 27 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
Parallel Transaction recovery caught exception 376
Parallel Transaction recovery caught error 376
*** 2011-04-21 19:09:28.651
SMON: following errors trapped and ignored:
ORA-00376: file 24 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data//undo.dbf'
In alert log file
*** 2011-04-21 20:18:16.178
SMON: following errors trapped and ignored:
ORA-00376: file 24 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
MMNL absent for 4286 secs; Foregrounds taking over
MMNL absent for 4286 secs; Foregrounds taking over
MMNL absent for 4286 secs; Foregrounds taking over
MMNL absent for 4286 secs; Foregrounds taking over
Thu Apr 21 20:20:26 2011
Errors in file /vol01/oracle/admin/bdump/dev_smon_516148.trc:
ORA-00376: file 27 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
Thu Apr 21 20:20:36 2011
Errors in file /vol01/oracle/admin/bdump/dev_smon_516148.trc:
ORA-00376: file 27 cannot be read at this time
ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
Kindly update me,
http://www.oracle.cc/2008/06/case-study-recover-database-after-crash-of-storage-array-linux-error-5-ora-01243-ora-00376.html
This link is giving solution for the same,confirm me
Thanks
Edited by: user13382934 on Apr 21, 2011 2:15 PM
Edited by: user13382934 on Apr 21, 2011 2:19 PM -
i can not resore my ipad 2? the message i keep getting from Itunes 10. is "ipad cannot be rstored at this time because the ipad software update server could not be contacted or is temporarily unavailable". What can I do?
Just in case, let's try the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.) -
Content editor webpart error "cannot retrieve properties at this time"
Hi,
Everytime I try to editor content within the content editor web part I receive the error message "cannot retrieve properties at this time".
I can edit the content within the web part when I use http. The error only seems to occur to when using https and SSL.
I've looked at the following web site and KB articles to implement a workaround however still get the same error.
http://support.microsoft.com/default.aspx/kb/912060
http://www.sharepointblogs.com/agoodwin/archive/2007/09/03/content-editor-webpart-error-quot-cannot-retrieve-properties-at-this-time-quot.aspx
http://support.microsoft.com/kb/830342
Can anyone else suggest anything else?My symptoms
1. CEWP & Sharepoint Designer could not retrieve data.
2. Event id 5000 "ulsexception12,p1 w3wp.exe ..."
Problem
1. Upgraded Small Farm WSS and SPS 2007 to SP2.
2. Unhandled exceptions and access denieds int the uls logs no specifics to run down.
3. Crawl issues and had to reset the crawl index.
Solution
1. ASPNet user account had certain rights stripped by gpo, check your permission with Tech Net "IIS and Built-in Accounts 6.0" or I found a much easier product to use Mircrosofts "Authentication & Access Control Diagnostics 1.0"
2. Ran the "stsadm -o sync -listolddatabases 0" to check for unsyn'd databases then ran the "stsadm -o sync deleteolddatabases 0" to clear those databases.
Havn't seen any further issues, this was a tuff nut to crack hope this helps someone else.jellywood -
App store reports "Pinball HD and 11 other apps cannot be purchased at this time"..... This occurs whenever I log into the app store. I have already purchased this app (and presumably the 11 others as well). I believe this started when it showed up as an app I should update (for free).
My wife and I share this iPad and we have apps purchased under two different store accounts on this machine. I have tried to log off and sign in with her account and then check updates but with either account I am told that all apps are up to date. All of our credit card info is current. Any clues?Already on Automatic..... :(
This is an iPad 1 - I've had it since it first came out (ordered directly from Apple). Lots of apps and purchases over the years. My wife got her own WiFi only iPad shortly after mine as she fell in love with it and I don't share well. ;) This only started about 7-10 days ago. I did not update to iOs 5.1 until last night so this predates that. My concern is that when the iPad 3 arrives next Friday that this will transfer over.
Ever since my wife received her own iPad our purchases are pretty much separate. -
"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!
lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that
Maybe you are looking for
-
d
-
I notice Windows 7 has a preferred resolution of 1280x800. Captivate has defaults for 1280x720. I am wondering what resolution others are using? I get a warning message if I drop belolow 1280x960 (shown below).
-
How much storage do I need to install Snow Leopard onto my 2008 MacBook?
I have a 2008 MacBook and need to install Snow Leopard to be able to connect with my ipad and iphone. But it keeps telling me there isn't enough storage space available. I have over 2Gb, isn't that enough?
-
Problem with multiline text item return on query
Hi there, I am a beginner in ORACLE, here when i write a query i engaged a weird problem, LOOP FETCH CSR_ODR2 INTO :ORDER_RECORD.OREDER_RECORD_NO,:ORDER_RECORD.BILL_NO,:ORDER_RECORD.ACTUALO_WEIGHT,:ORDER_RECORD.OPERATION,:ORDER_RECORD.PLACE,:ORDER_RE
-
Hello I am running iMovie version 9. I have literally just spent hours and hours over the past year making a video of my son's first year. It's taken a lot of blood, sweat and tears and now when I try to finalise the project it finalises for a few ho