Document Category not being generated Automatically for AR transaction type

Hi,
we have defined some transaction type in AR. But the corresponding document category is not being automatically generated
Kindly help

This doesn't look feasible, the only issue I ever encountered with this was the document category not being updated if the transaction type was updated. Maybe the customer has some custom triggers which are preventing the record from being inserted into FND tables. You can easily debug this by opening the form and testing in a TEST environment.

Similar Messages

Snapshots not getting generated automatically

Hi all,
I want to generate an ADDM report. For that, I am running the addmrpt.sql script in $ORACLE_HOME/rdbms/admin
While running, i am being asked for the begin_snap ID and end_snap ID. The problem is I have only one snap_id. The snapshots are not getting generated automatically for every 1 hr, as they shd be. I have to manually create a snapshot and run the ADDM script. I know that the database has to be open for atleast next 1 hr for getting the snapshot. I have not closed my database for the whole day.
Now, I want to know what exactly I shd be looking at, or rather be doing to get my snapshots generate automatically.
Please help me in this regard.
Thanx in advance....
Regards,
ORA_SRI

Hmm, you probably want to ask questions about ADDM in the [Database General Forum|http://forums.oracle.com/forums/forum.jspa?forumID=61]

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Accounting document not being generated from SD

I have been trying to create billing documents from SD but I am getting this message that says that Accounting document can not be generated. Even when I release to accounting it just says no accounting document generated.

Could be an issue with account determination (VKOA). You can analyze via Environment -> Account Determination Analysis -> Revenue Accounts to see what is missing. Please also search the forum with keywords from your subject line. There are several messages. Here is one example.
No accounting document generated during billing

BPM alert not being generated

Hi guys,
I'm having quite a little trouble in doing one thing which has been done for several times but which is giving me a hard time...
I've created a bpm process which in an error condition will trigger a simple alert.
I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
Thanks a lot for your attention

Hi,
Yes the job scheduling is needed only for Sp14 and below.
Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
Finally, refresh the Alert Inbox.
Regards,
Bhavesh

F-28 T-CODE - Open Document is not being pulled

F-28 T-CODE - Open Document is not being pulled
Item is shown as open on customer account (FBL5N). Item has not been cleared.
When selecting items to apply payment, the following message is shown:
"No appropriate line item is contained in this document" Message no. F5228
Appreciate any help that can be provided.
Best regards, Maikol M.

Hi,
- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist:
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
Look at table REGUS using Transaction SE16. Enter the account (KONKO) in the selection screen. If you selected an entry, use the information Run date (LAUFD) and Identification (LAUFI) in Transaction F110 (payment program). Check the status of the payment run. If only the proposal was carried out, the documents proposed for payment are blocked for other clearing transactions. It is only when you delete the proposal run that the items are taken into account again in the clearing transaction.
Rgds.

Rebate Agreement Statement not being sent automatically

Hi SAP experts,
I am currently investigating why 3rd Party Commission Agents are not receiving Settlement Statement Details automatically.
Can anybody help on where the setting can be incorrect or why the communication are not being sent.
In FI transaction FBL5N everything looks correct.
Any help is welcome
Regards
Roger

Hi Roger,
I have a doubt? Who must receipt the e-mail? the customer or the sales agent?
If the agent must receipt the e-mail perhaps you can create a Z-FIELD for the email of the agent (with the BADI 'CUSTOMER_ADD_DATA' and 'CUSTOMER_ADD_DATA_CS' (in table KNB1 eg) and in the enhancement populate the field FINAA-INTAD with the email of the agent if BKORM-EVENT is the right correspondence (it works as a filter).
I hope this helps you
Regards,
Eduardo

Spool file not being generated in production server

Hello
Our end users are using automatic payment program F110 to print multiple cheques.
The settings in SPAD are identical in Quality and Production Server,but some how
spool file is not being generated in production.
Test printing is fine in Quality server.
Printer being used is Epson LQ 300.Device type is EPESCP2.
We are using z custom page size ,and it is assigned to printer device Type as well
Would be very great if some can can comment on which settings to check,as SPAD setting is
same in both server ,yet no spool.Very Very urgent.
Iam not sure ,whose domain is it now-BASIS or ABAP.
Thanks a lot
Nouman

If there is a problem with the spool, the variant that is being in F110 parameters.
As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
This should solve your situation.

Reports not being Generated

I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

I am fairly new at this so let me try my best to answer these questions:
Crystal Reports XI
Visual Studio? Not sure
No service pack applied. How and where do i get it?
I am using Windows XP
I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
No have not tried to view a single report; i don't know how.
I have not used Crystal reports designer for anything else.
Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

TA1 Acknowledgement not being generated.

Hi All,
I have a requirement for the Inbound 820 to generate 999 and TA1 Acknowledgement. 999 is fine but TA1 is not being generated. I tried changing the ISA14 element to '1' from '0'(by referring http://docs.oracle.com/cd/E28280_01/user.1111/e10229/app_ta1.htm), but of no use. The ISA of the EDI file is as follows
(ISA*00* *00* *30*905454545 *30*805454545 *130315*0758*^*00501*100000174*1*T*\~). I am using B2B 11.1.1.6.
Please help me out with some suggestions.
Thanks in Advance!!
Edited by: soa999 on Apr 15, 2013 4:17 PM

I am using B2B 11.1.1.6.TA1 Ack feature has been introduced in PS6 (11.1.1.7). So please use PS6 (11.1.1.7) to get benefit of this feature. If you cannot use PS6 then raise a SR with support to check if you can get a patch on top of PS5 (11.1.1.6) to use this feature.
Regards,
Anuj

The time on my iphone is not being updated automatically, although it is set that way, why is the time 10 minutes slow

The time on my iphone is not being updated automatically, althought it is set that way. Why does it not update the time and why is it 10 minutes slow?

Thank you for your reply. I realy have nothing else to sync - no music. Emails do work so its just my contacts I am concerned about. I'm kinda new at this but have a working understanding of the system.
I have an icloud account but the Geek Squad went there and tried but could not export contacts. I truly am not that good re icloud. They worked exclusively with my itunes, re-downloading, etc - all of the stuff in their book.
I have not tried a complete restore because I am not sure I am that good with the equipment but could. I did all of the stuff on the help page - sync reset, forced one-way sync etc but the phone just does not seem to recognize the sync. I have not gone to an Apple store to have them have a look - that may be my next step to hook up to another itunes computer. It seems simple to me - it was working fine until maybe 3 months ago - probably when there was an update. Its telling to me that the phone does not tell me there is a sync in process while itunes is saying there is - its just not biting between the 2.
I appreciate any hep - and I said, I not stupidi about these things but have kind of reached as far as I am comfortable with fear of doing something really wrong.

Some backend documents could not be generated or are incorrect - Contract

Hi SRM Experts,
I am trying to create Contract with Carry out Sourcing and reference to Shopping Cart. But, I am able to create Contract with Error like "Some backend documents could not be generated or are incorrect". Please let me know do I need to do any configuration settings or implement OSS Note to fix for my problem.
Kind Note: System is not updating Purchasing Organisation and Purcgasing Group at Contract Header Level. I treid to use BAdI (change BAdI) to update Organisation details - got Organisation details from Shopping Cart and updated in Contract change BAdI (Org Structure).
SRM Version: 4.0 with Extended Classic scenario.
Thanks a lot in advance for your help.
Thanks,
Sudarsan

Hi Muthu / SRM Gurus,
I removed BAdI implementation for Contract. I am still gettign error message.
When I create contract from Carry Out Sourcing I am geeting error message "Some backend documents could not be generated or are incorrect" and when I create contract with Process Contract I am not getting any error.
Can anyone guide me or suggest me to fix this issue?
Thanks a lot in advance.
Thanks,
Koyya

Mail is not being checked automatically

My e-mail accounts are not being checked automatically even though I have them set to be check every hour. I also tried a day at 30 minutes but I noticed the iPhone is still not checking my messages. I have to check manually. Any suggestions?

I am having the same issue, which appears to have started with the last firmware update to my iPhone. Yahoo no longer pushes mail to my iPhone, and the check every 15 minutes does not work - I have to manually refresh my email accounts to check for mail. This used to work correctly. I've had no luck finding answers online yet.

Default Personnel No. Ranges not being generated through NUMKR

Default personnel number ranges according to the company / client are not being generated. what should I do further to fix the problem?

Hi first go to PA04 and maintain the different number ranges as stated above.
01 1 to 2000
02 2001 to 5000 etc
here 01, 02 are different number ranges.
In your case maintain a number range number 6 with a range as per your requirement.
Then go to PE03 NUMKR feature.
Create subnodes using Personnel Area with a return value as the number range number.
So in you case decision tree should look like should look like
NUMKR
WERKS
GUJ1 ( PA for Gujraat)
06 ( return value = number range number )
Hope this helps.
Ajay

SWF File not being generated by compiler

I am using Flash Builder 4.5.
One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
This was working up until I made a change to the module in question and then saved it.

I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

Document Category not being generated Automatically for AR transaction type

Similar Messages

Maybe you are looking for