Document copying from one place(holder/level) to another place(holder/lev).
Hi All,
I need to copy the document from one place/level to another place/level. I am not supposed to use down load and upload concept as ther could be more documents per one revieew. It's basically PS module. I just want to checkout form one place and check in to another place.
Lets specifically explain....
I need to copy documents of all document types of one credit which are at credit level and
paste it at Review wbs level. where all the credits belong to that Reveiw wbs.
With out using document down load and upload, rather using check out and chekin.
Thanks in advance.....
Edited by: Faiyaz Ahmed on May 5, 2009 7:01 PM
It might be feasible using BDC or probably using some BAPIs.
Regards
Shital
Similar Messages
-
Copying from one arrangement and pasting into another arrangement
Hi, I'm using Logic Express 8.
I'm wondering if there is a way to copy several tracks from one arrangement window into another. I've tried to do this simply by copying and pasting, but when I paste into the new arrangement window I get error messages and the tracks pasted into the new window have a speaker icon with an "X" through it - and obviously no sound.
Am I missing something, or perhaps this is simply a limitation that exists with using express instead of pro?
Thanks a lot.You can do this by simply importing the data from one project to your new one. Check it out here.
-
Copying from one photo to paste into another
I need to copy two people from one photo and paste them into a group picture in another photo. I understand this is not something Aperture can do. I need something like Photoshop. However, since I seldom do this type of copying and pasting, is there a less expensive photo editor that will let me do this? Will Photoshop Elements suffice? Or is there a free application like Picasa that will do the job?
TIA!!In order of price here are some suggestions:
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
Regards
TD -
How to copy and paste text from one photo book page to another.
hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts -
How to copy BEx Workbooks from one user's favourites to another user's
Is there a way to copy BEx Workbooks (Excel Analyzer) from one user's 'Favourites' to another user's Favourites?
A user is away on vacation and we need to get at a couple of workbooks that are stored only in that user's Favourites. We do not have access to that user's user id and password.
Were on BW version 3.5.Thanks Ravi.
We are aware that if a workbook is assigned to a Role then other users can access the workbook.
In order to assign the workbook to a Role, we need to be able to see it in the first place.
The workbook is currently saved only in a specific user's Favourites, and that user is away on vacation. We can not assign it to a Role unless we sign on as that user. We do not have the user's logonid and password.
So we are still interested in finding out how to copy from that user's Favourites, perhaps via a program or via the Administrator Workbench. -
How do I copy and paste from one page or file to another page or file - on the same screen?
How do I copy and paste from one page or file to another - on the same screen?
Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale. -
How can i copy files from one external hard disk to another using macbook pro with retina display
How can i copy files from one external hard drive to another using macbook pro with retina display?
That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton -
Can I and How do I copy from one iWeb site to another.
I currently have a few different versions of my web site stored as different doman.sites I would like to copy a blog entry from one into another. Is it possible to do that and if so how. I am sure I could copy all the text and all the pictures separtly and then paste them in, but that would be tendious as I would either have to keep opening and closing iWeb between the different versions or have them both open on separte accounts on my computer and keep jumping back and forth between them. Any suggestions? Let me know.
http://web.mac.com/captrustywildrice/
[email protected]what exactly would I copy from one folder to another to be sure that the blog entry that I am copying shows up in the blog menu? I would like to be able to copy everything together, dates, links at the bottom, hit counter and all, rather than piece by piece off of the site or from another iWeb account. Thanks!
-
Hardware:
Apple Powermac Dual 2.5 GHz G5
512 MB RAM
External Drive 1: LaCie 250 GB (Firewire 800) (contains 150 GB data) (formatted MacOS Extended)
External Drive 2: LaCie 400 GB (Firewire 800) (contains NO DATA) (formatted MacOS Extended Journaled)
Software:
Mac OS 10.4.3 (Tiger)
I've sucessfully run the firmware updater (http://www.lacie.com/support/drivers) "LaCie Update Tool v1.3.3" for both LaCie drives to the latest version - 107.
Background:
Before I updated to the latest firmware and before I changed Drive 2 to journaled, I had problems copying files from both drives to the other. I get this error: "The Finder cannot complete the operation because some data in "filename here.ext" could not be read or written. (Error code -36)."
I did some research (http://www.appleerrorcodes.com/) to discover that Error -36 is an I/O error.
My goal is to reformat Drive 1 (250GB) to journaled. After some reading, I have decided to do that for both of my external drives.
Question:
I'm at the point now where I need to copy the data from Drive 1 to Drive 2 and this error is still occuring. I need to 1) understand why it's happening and 2) find a solution so I can copy this data from Drive 1 to Drive 2.
Future Question:
Once the data is copied, I will then reformat to journaled. I'm then going to decide between scheduled backups or setting up a RAID, but I'll post this issue as a separate question. I first need to understand and fix this copy I/O stuff.
THANKS!
Dual 2.5 GHz G5 Mac OS X (10.4.3)Using the Disk Utility with the Mac OS, I just realized that I can't verify or repair disk permissions on either of these external LaCie drives. I can on my startup internal disk, but not the external ones. Any idea why?
I replaced the FW800 cables, but I still cannot copy from one external to the other. The connections are like this:
Drive 1 (250 GB) is connected to the back of my G5 via FW800.
Drive 2 (400GB) is connected to Drive 1 via FW800 cable.
I'm in need of some help!
Robert
Dual 2.5 GHz G5 Mac OS X (10.4.3) -
Cannot copy itunes from one external hard drive to another.
I have been using an external hard drive for storing my itunes and iphoto for a while now. I have never experienced any issue copying it to a larger drive for back up. My current drive is only 80 gigs (LaCie) and is almost out of space. I bought a new g-tech 500gig mini drive to replace it. Every time that I try to move the files from the old drive to the new one, I get the following error message 10 gigs into the transfer-
[You can’t copy “Music” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames.]
There is nothing on the new drive. I even took the iphoto folder off to make sure there was nothing on it to cause this message.
Is this an external drive issue or a Finder issue? I had no issue moving the iphoto library onto the new drive, fwiw...I am getting exactly the same problem. It's just with the music folder. I dont get the problem copying other folders over. It gets about 22gb into copying 100gb from one external hard drive to another then I get the error message "You can’t copy “Music” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." So I tried just copying the itunes folder and I still get the same message. Any advice welcome.
-
Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/ -
Adobe Bridge CC : metadata copy from one field to another for multiple files
So I am using Bridge CC for managing audio files and have many many MP3's that I need to copy or move one field of metadata to another.
ie: copy "Audio Artist" field to "IPTC Core Creator" Field
move "IPTC Core Description" to "Video Log Comment" field
Is there a script I can add that will let me select multiple files, and have it copy or move all the info from one of these fields to another?
Thanks
Scott
[email protected]Scott, I did have a go at this but I can't get the right path to the logComment in the XMP…
Coping artist to creator works fine… If I find the solution I will post back… -
HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?
Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?
Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it
-
Can security information be simply copied from one server to another?
Hi,
In WL6.1, we managed to set up a build and deploy system, with an RDBMS realm,
using ant. What we did is that we created a config.xml file, put it in our CVS
and modified it manually when needed. However, using this system, we always had
a one-step process for configuring and adding new information in our realm. Can
I expect to be able to do that with 8.1?
I'm not too clear on the entire JAAS principles involved and it does seem to be
more complex than in 6.1. We do a lot of automated testing and need a way to test
our security where we don't need to continually do manual labour.
My impression is that in our production environment, we will need to:
- Create a new server and domain manuall
- Configure the initial Realm manually
- After that, manual changes in our config.xml should be able to work correctly
Am I correct in my assessment? Or are there some peculiarites to the whole security
system that would prevent me to do what I want without a lot of manual intervention?
Thanks,
LHi KK,
Yes you can copy from one server to other server but make your that you change the restiry.xml file correctly.
1 what are the changes we need to do?
Major thing is you need change few path from following files.
from %BEA_Home%
-- .home
-- registry.xml
-- domain-registry.xml
Wlserver_103 folder
-- .home
--.product.properties
Majorly path changes from common / bin folder and server / bin folder in startup scripts.
-- Majorly you need maintain same folder structure for your Domain or BEA Home.
-- Thats it make your JDK are available on setted path.
Note when you copy directly in similar folder structure major issue will be solved out.
let me know if you need any further query on this issue.
Regards,
Kal -
Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG
Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation!
Maybe you are looking for
-
Dear all, In PO I want to maintain the exchange rate in USD at header level and it should display in INR after multiplying with the quantity and converting from USD at item level in Condition tab. regards, Madhu.
-
Where did I found the images in Finder?
For a while ago, I found some images in Finder of, among others; iPad, iMac Unibody, some MacBooks, etc. Now, I can't remember where I found them. Does anyone have experienced the same, and can tell me where in Finder they are?
-
Vendor Return Excise Invoice Problem
Hi All, I have captured/posted excise invoice of 'Consumable' material type . When i am doing return delivery part 1 posting is going to RG23C1 register but Part 2 posting is going to RG23A2 . Why this is happening? Please guide u
-
This is all I can remember. The Firefox download process did not complete.
-
Installation guide with screen shots for OAS Installation
Hi, I want to know if there is an Oracle Application Server Installation Guide 10g Release 2 (10.1.2) for Solaris Operating System (SPARC) that contains the screen shots of the installation procedure. Thanks in advance. Regards, Sindhiya V.