Document could not Save after edit in SharePoint Document Library

Hi,
Actually the User is as "Contributor" Access.
I have uploaded the word document in document library. After that i have "Checked Out" and "Edit in Microsoft Word".
Its opening correctly and I have made some changes and tried to save.i am getting message Like "File is read Only".
So, what would be the issues. I am wired like anything because of it. The same thing happen for "Excel Document".
Can anyone suggest me on this.
Thanks in advance.

Hi,
Thank you cameron rautmann
Yes I have checked. "Content Type is selected as :No" only.
"Allow management of content types?" option is "No" only in "Content Type"
Still its showing the same.
Thanks
Poomani Sankaran

Similar Messages

Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

Xformbuilder error ... Could not save document Name/Name-Schema.xml

Hello everyone,
We're using 7.00 SP14 and I have a problem with the xml forms builder on one of our systems. We're having a 3 system landscape - all three are on the same patch level etc.
I was able to create a new xml form on one machine, unfortunately it doesn't work on our P-system. I tried to create a new form as well as copied an existing one - with the same error result.
While saving a project the following errors appear:
The following error occured when saving the schema: Could not save document Name/Name-Schema.xml. Reason: Operation is not supported
The project could not be saved on the server. Do you want to save a local copy?
Oct 13, 2008 2:45:43 PM - (ERROR)com.sapportals.wcm.app.xfbuilder.server.ServerManager :Could not serialize document: Operation not supported
Does anyone know what the problem is? I'd appreciate your help, thanks.
Sincerely,
Susanne
Okay I just found out that it's not possible to create a new folder in KM under xmlforms. That's working on the other 2 systems quite well. I have all the admin roles but somehow somewhere somewho must have restricted that. We found out that ice, etc, runtim, entry points and maybe even a few more aren't setup to create new folders in there. Does anyone know where/how to change that? It doesn't work with Details - permissions etc.
Edited by: Susanne Zahn on Oct 13, 2008 3:40 PM

For anyone who's interested in the solution.. there you go.
14.10.2008 - 17:53:00 CET - Antwort von SAP
Dear customer,
Can you please check whether the repository /etc is in read-only
mode?
Please navigate to -
System Administration -> System Configuration -> Knowledge Management
-> Content Management -> Repository Managers -> File System Repository
There you can see the checkbox for "read-only".
Please insure that this is not ticked. If it is, please uncheck it
and building/saving the project again.

Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?

I have an iMac 21.5 running OS X 10.9.4:Processor 2.7 GHz Intel Core i5:Memory 8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different path.' Unable to save anything now?? Can anybody help?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

"could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
Tnx

Hello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014)

I have adobe CS 5.1 and recently (after an update) it is giving me an error (Could not save...because of a program error) every time I try to save my work as a PDF Help how can I get this resolved??

I have adobe CS 5.1 and recently (after an update) it is giving me an error (Could not save...because of a program error) every time I try to save my work as a PDF> Help how can I get this resolved??

Run the cleaner, reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
And don't bother with running any updates unless you really need them or they fix a critical issue relevant to your workflow.
Mylenium

"could not save as ***.psd because the document is bigger than 2 gb

"could not save as ***.psd because the document is bigger than 2 gb

Yes, that's the maximum for PSD. Save as PSB instead.

Recently when trying to save an edited version of a photo in cs6 i get this message {could not save (filename) because write access was not granted}. Why is this? and what to do?.

Recently when trying to save an edited version of a photo in cs6 i get this message {could not save (filename) because write access was not granted}. Why is this? and what to do?.
robinh 380102549

It seems you lack the rights to change the file, so you may want to repair permissions.
Do you have administrator rights?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

Could not save document

I'm using GoLive CS2 v. 8.0.1
Mac OSX 10.6.7 on a Mac Pro w/ two Quad-core Xeon
I opened my site, made a small change, and when I tried to save the site, I received this error message: Could not save document, OS Error (-36).
When I try to re-open the same site, I'm told the site cannot be read. When I open the backup site, the change I had made is visible but I cannot save this backup site either.
Opening previous copies of the site from another disk gives the same results; I can open the site, make changes, but can't successfully save the site without corrupting it.
I've been using the same version of GoLive successfully for several years, modifying the same site, and now it suddenly cannot save the site.
I updated to OSX 10.6 last December, and have used GoLive successfully since then. I don't recall when the system did the update to 10.6.7 and am not sure if I used GoLive since that happened.
Does this sound like a corruption of the application software? If so, is my best course of action just reloading the software?
Is there some compatibility problem between GoLive 8.0.1 and OSX 10.6.7?
What to do?
Don Wong
[email protected]

Thanks for the PPC tip. My PPC tower is long gone, but I've still got my 6 year old PowerBook. Not sure if it's up to the task, but I'll keep it around.
I'm a photographer, not a website writer, and only learned enough GoLive a few years back to write my site and maintain it. I seem to remember that GoLive was replaced by Dreamweaver (Adobe gave me a copy of it along with GoLive) and my impression is that GoLive is no longer being updated and therefore more problems might crop up as operating systems and hardware evolve. (I could be wrong, since I don't follow web software developments.)
Back to your original comment about wanting to stick with GoLive CS2. If for some reason I wanted to transition to another software in the future, is there a standout choice for me? Keeping in mind that I don't really use it that often, and would prefer spending the least amount of time relearning things.
What is the majority using these days?
Also, if I did switch software, would I have to re-write my site from scratch, or could the existing site be 'ported' over to the new software?

Photoshop CS3 error saving files - Could not save ... because the fileis already in use or was left

I have a problem with Adobe Photoshop CS3 that only started happening last night. Heres a description of the problem.
When I try and save a Photoshop file, I get the following error message:-
Could not save (filename). because the file is already in use or was left open
I have rebooted my computer, rebooted our server, un-installed & reinstalled Photoshop and also done a system restore, and I still have the problem. (The system restore actually caused huge problems I got the error message The licensing subsystem has failed catastrophically. You must reinstall or call customer support, except I wasnt able to reinstall or uninstall the product. The computer just would not run the installer. I had to undo the system restore.)
I can do Save For Web with no trouble and I can save files to the same location with every other Adobe product installed in the Web bundle, just not Photoshop.
We have 2 machines here with an identical set up (hardware and software) and the problem is only on one machine.
Even though Photoshop says it cant save the file, its actually saving the file in the following format:-
~psX.tmp where X is a random variable, either characters or numbers.
I have to manually open My Documents and rename the file to filename.psd so I can access it again.
Short of reformatting my computer (which Im not keen on doing because it will mean several wasted work hours and I will have to pay our IT people to come in and hook me back up to our network), how can this problem be fixed?
I have also Googled the problem and the only help I found was a suggestion to search for a psicon.dll file and rename it. This file does not appear anywhere on my system, so I'm at a loss.
I have contacted support about this issue, but thought it was also worth while to ask here at the same time.

I'm having similar problems with not being able to save files after editing them (and giving them a new file-name, obviously) in Photoshop Elements 4.0. I get an error message saying (for instance): "Could not save as (whatever I'm trying to name the file) because the file is already in use or was left open". Then I see a .tmp file (that I can't open)
I did a search and found that the file was being saved twice, once within Photoshop (where I'm working with it) and also in..
"C:\Documents and Settings\Owner\My Documents\My Pictures\Temporary"
I'm assuming this is the problem, but if you have any clue as to why is this happening and what I can do about it, I'd welcome any input. I've been using PSE-4.0 for years, and this problem just started cropping up. The only (cumbersome) way around this problem has been to just make my edits (in PSE-4.0) and do a "save" under the original file name, then go into explorer and rename the file. So, in short, I cannot do what I've been doing for years, editing a picture and saving it (renamed) in the sane folder (or a different one).
I can "see" the .tmp files in PSE-4.0, but they won't open.. but they will in JASC.. odd..
Thanks-
Bob

Photoshop CS4 "Could not save as...because file is already in use or was left open"

I have been using Photoshop for years, and CS4 for about a year now. I have never had this error message pop up until this week. It started happening right after I did the Adobe update to 11.0.2. Everytime I try to save a PSD or JPG file now (which are the only two types of files I work with), I get this message preventing me from being able to save;
"Could not save as... because file is already in use or was left open."
I have to attempt to Save as about a dozen times before it will finally save the file. Any suggestions on what could be wrong and how to remedy it? Is it the update that caused this problem?

Turn off Caching of Thumbnails in Hidden thumbs.db Files
People sometimes report that they cannot manipulate their folders as they want to because Explorer has a thumbs.db file open. Windows 7 apparently generates these files for compatibility with older software that may expect such files to exist in folders with, for example, photos in them.
The good news is that (with Windows 7 Professional and above) you can disable this through the Group Policy editor:
Click the Start orb
Enter gpedit.msc in the search box and hit Enter.
Expand User Configuration - Administrative Templates - Windows Components.
Click on Windows Explorer.
Right-click the entry "Turn off the caching of thumbnails in hidden thumbs.db files" and choose Edit.
Enable the setting.
-Noel

Could not save *.* because file is in use or was left open...

OK, I mentioned this when it happened with .eps files, and rather than get a single useful tip(Except for 'choose a new file name'), I got a series of responses from people telling me how I should be saving in .tiff and 'eps files aren't any good anyway, etc., etc... IN other words, no help, just a bunch of opinions on what I was doing wrong in the first place.
Well, now I have had it happen with a .tiff file. I opened the file, did some work, and went to re-save it, and I got the error that it could not save the file because it was in use, or had been left open.
Anybody got any suggestions on why this is happening?
Mac OS 10.4.1
Dual 2.66 GHz Dual core Intel Processors
2 Gb RAM
Photoshop CS3

OOPs I forgot to paste the Adobe help message so here it is;
understand that you receive an error when you try to edit Lightroom
images in Photoshop® CS3.
If you have not already done so, update to Photoshop Lightroom 1.3. In
Photoshop Lightroom, choose Help > Check For Updates. You can also
download the update from the Product Updates page on the Adobe website.
Try specify Photoshop CS3 as the Additional External Editor in your
Lightroom preferences:
- Click the Lightroom menu and choose Preferences.
- Click the External Editing tab.
- Click the Choose button under the Additional External Editor
section.
- Browse to the Photoshop CS3 application file and click Choose. If
Lightroom gives you a warning, select Use Anyway.
- Select an image in the Lightroom Library module, click the Photo
menu and choose the second option for Edit In Adobe Photoshop CS3.
If this does not resolve your issue, it is possible that files from
Photoshop CS2 are interfering with your workflow. To completely remove
Photoshop CS2 files from your computer, follow the instructions in the
following document on our website:
http://kb.adobe.com/selfservice/viewContent.do?externalId=331404
<(>&<)>sliceId=2
If this does not resolve your issue, it is possible that your Lightroom
catalog is damaged. To test the integrity of your catalog:
- Launch Lightroom while holding the Ctrl key on your keyboard.
- Check Test integrity of this catalog
- Click the Select button.
If you have a large number of photos in the catalog, Lightroom may take
some time to complete the testing process and finish launching.
If that does not resolve the issue, quit Lightroom, launch it the same
way and create a new catalog in the Select Catalog window.
If you continue to experience the issue, try the steps in this general
troubleshooting guide on our website:
http://kb.adobe.com/selfservice/viewContent.do?externalId=333653
<(>&<)>sliceId=1

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

InD blocking Ps to save a file / Could not save * because the file is already in use error

Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.

JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.

Document could not Save after edit in SharePoint Document Library

Similar Messages

Maybe you are looking for