Document data to be mapped against ERP data fields

Hi GTS-Experts,
is anyone of you aware of an existing mapping table that links data elements in customs declaration messages to data elements in SAP GTS or ERP?
Within the scope of a fit-gap analysis, I'm trying to identify possible gaps where data required for the NCTS declaring might not be available in SAP ERP. I'm currently reviewing lists of message elements for specific NCTS implementations (e.g. ATLAS in DE, PLDA in BE), but this is not straightforward at all.
Thanks for your support and regards,
Martin

This is a good idea, and should be standard with the purchase of GTS.
Advise if you are able to find a source, as it would be useful to all users of GTS. I've considered mapping data fields in SAP and GTS against the WCO Customs Data Model, in order to have a common definition for the fields, and to facilitate mapping to EDI messages and for user help.

Similar Messages

Dates are not mapped as the Date data type in Universe created on Infoset

Hi,
When i try to create the universe on top of Infoset query, the date fields present as the variables in SAP BI Query are not mapped as date data type in Universe, instead they are considered as Characters, hence the prompts related to those variables are coming s List of values instead of Calendar in WebI.
Can any one pls help me to find the solution on how to map date variables as calendar in Webi Prompts.(For SAP BI Queries created on Infoset)
Edited by: Nisha Makhija on Jul 20, 2009 5:59 PM

Hi Ingo,
Thanks for your response!!
The I Query is built on Top of BW MultiProvider and the InfoObject is of Type DATS.
Actually our Modeling on the BI is as follows :
DSOs> Infoset>Multiprovider->BI query>Universe.
Since we were not able to get the prompts as Calander so We tried Debugging on different Data targets to find the root cause. Please find our observations as follows:
When I tested the same date infoobject(of Type DATS) by creating a BI Query on top of DSO, Infocube & Multiprovider ,the Prompts are working fine as a calander in WEBI Report.
But when the BI Query is built on Infoset data target, In WEBI Report I am getting list of values rather a Calender prompt .
I tested in the Universe that field is appearing as Character instead of Date.
Please guide to resolve this issue.
Thanks,
Nisha.

XSLT Mapping - Getting current date in XSLT version 1.0

Hi,
I want to fetch the system date and compare it with another date, say 06.04.2010.
How can I do this in XSLT 1.0?
Thanks & Regards,
Aditi Naik

Hi,
I tried using the following code:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:cal="java:java.util.GregorianCalendar">
     <xsl:output method="xml"/>
     <xsl:template name="currentDate" xmlns:cal="java:java.util.GregorianCalendar">
          <xsl:variable name="now" select="cal:getInstance()"/>
          <xsl:variable name="day" select="cal:get($now, 5)"/>
          <xsl:variable name="month" select="cal:get($now, 2)"/>
          <xsl:variable name="year" select="substring(string(cal:get($now, 1)), 3, 2)"/>
     </xsl:template>
<Body>
          <xsl:choose>
          <xsl:when test="boolean(//*[local-name() = 'IRenvelope']/node()) and boolean($year = 2009) and boolean($month > 11) and boolean($day > 05))">
          </xsl:when>
          </xsl:choose>
</Body>
However, when I try to run this mapping I get the error "Invalid XPath Expression" in Altova.
Can you please tell me exactly what is wrong with this code and how I can get around this?
Thanks & Regards,
Aditi Naik

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

Report for viewing Sales order no against delivery date & actual GI date

Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.

dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit

Filter Idoc segment based on date in XSLT map

Hi,
In a Idoc to flat file XSLT mapping, I have a requirment to filter segment out of multiple segment occurance in HRMD_A idoc. Idoc has two date fields(actually string data, containing date in YYYYMMDD format) in the segment(end date and start date). I need to filter only one segment from multiple segments where current date falles within start and end dates (end date >= current date >= start date). Then map output fields from the filtered segment.
Its easy doing it in graphical mapping, but its difficult to use graphical mapping here as the message structure are enormous. I dont have much hands on in XSLT but think many of you have been through this kind of requirement using XSLT. So holding my hope high :). Please suggest a logic for this, will be highly appretiated.
Regards
Suman.

This functions will give you the current date:
fn:current-dateTime()     => Returns the current dateTime (with timezone)
fn:current-date()                 => Returns the current date (with timezone)
fn:current-time()                 => Returns the current time (with timezone)
To compare:
fn:compare(comp1,comp2)
fn:compare(comp1,comp2,collation)
=> Returns -1 if comp1 is less than comp2, 0 if comp1 is equal to comp2, or 1 if comp1 is greater than comp2 (according to the rules of the collation that is used)
Example: compare('ghi', 'ghi')
Result: 0
Also I suggest working with an IF condition like this:
<xsl:if test="price > 10">
        <tr>
          <td><xsl:value-of select="title"/></td>
          <td><xsl:value-of select="artist"/></td>
        </tr>
      </xsl:if>
Edited by: Kai Lerch-Baier on Apr 14, 2009 10:21 AM

Foreign key Mapping based on Data - in SQL Developer Data modeler

Team
Do SQL Developer Data modeler supports Foreign Key mapping based on the Data in the Schema rather defined at the DDL ? For e.g if we implement a Objects Relation ship mapping in Data base, we don't define Foreign keys at table creation.
Toad does this feature through "AUTOMATIC FOREIGN KEYS MAPPING IN TOAD DATA MODELER" more info at (http://toadworld.com/Blogs/tabid/67/EntryId/905/Automatic-Foreign-Keys-Mapping-in-Toad-Data-Modeler.aspx)
any one know how to implement through some scripts also helps me
Regards
Raj

If you have table PKs defined and the candidate columns match those PK columns, then you can use the Discover Foreign Keys utility. Right mouse over the relational model name (node) in the left browser. It is about half way down the menu. I did a blog post about it last week on kentgraziano.com.

Mapping Float with data type Qty or Curr or INT4

Hi,
We are extracting the data from a table. Some fields are defined as Float but at trasfer rules we have mapped those Key figures with Quantity or Currency or INT4 .
In transfer rules there is only info object mapping. But when extracting the data we are not getting any data even In PSA for those fields.
Please suggest should we change the data type or any changes
Thanks,
Shaliny. M

Hi,
Can you provide some more inputs.
have you mapped with Standard Fields.
Reg
Pra

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

Current date in xslt mapping

Hi,
I've tried to get the current date in my xslt mapping.
I've used the following xslt coding:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:date="http://exslt.org/dates-and-times" extension-element-prefixes="date">
<xsl:template match="/">
<xsl:variable name="now" select="current-date()"/>
</xsl:template>
</xsl:stylesheet>
In stylus studio everything is OK and i retrieve the current date.
When i import the xslt in the mapping tool and test the mapping i get the following error:
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Function with name 'current-date' not found in context library. at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251)
While directly using the current date functionality within the message mapping everything is OK too.
Does anyone know which date-functionality is used within the message mapping within the Integration Builder and/or wich mapping to be used in xslt for a working scenario?
Thnx in advance!

Ok thnx, these anwers where very helpfull for me to solve this problem.
I've awarded points for all your answers.
For anyone interested later on, I needed the date in my XSLT mapping in the following format ddMMMyy.
Finnally I used the following xslt to achieve this:
     <xsl:template name="currentDate" xmlns:cal="java:java.util.GregorianCalendar">
          <xsl:variable name="now" select="cal:getInstance()" />
          <xsl:variable name="day" select="cal:get($now, 5)" />
          <xsl:variable name="month" select="cal:get($now, 2) + 1" />
          <xsl:variable name="year" select="substring(string(cal:get($now, 1)), 3, 2)" />
          <xsl:variable name="month">
               <xsl:choose>
                    <xsl:when test="$month=1">Jan</xsl:when>
                    <xsl:when test="$month=2">Feb</xsl:when>
                    <xsl:when test="$month=3">Mar</xsl:when>
                    <xsl:when test="$month=4">Apr</xsl:when>
                    <xsl:when test="$month=5">May</xsl:when>
                    <xsl:when test="$month=6">Jun</xsl:when>
                    <xsl:when test="$month=7">Jul</xsl:when>
                    <xsl:when test="$month=8">Aug</xsl:when>
                    <xsl:when test="$month=9">Sep</xsl:when>
                    <xsl:when test="$month=10">Oct</xsl:when>
                    <xsl:when test="$month=11">Nov</xsl:when>
                    <xsl:when test="$month=12">Dec</xsl:when>
                    <xsl:otherwise>INVALID MONTH</xsl:otherwise>
               </xsl:choose>
          </xsl:variable>
          <xsl:choose>
               <xsl:when test="$day < 10">
                    <xsl:value-of select="concat(concat(concat('0',$day), $month), $year)"/>
               </xsl:when>
               <xsl:otherwise>
                    <xsl:value-of select="concat(concat($day, $month), $year)"/>
               </xsl:otherwise>
          </xsl:choose>
     </xsl:template>

How to load data using two maps for the same source file in Import Manager

Hi,
I am trying to load the source data to MDM using two map files, since one map is too big (creating memory error).
However the first map data able to see after loading (SAP data) but when loading second map(nonSAP data) using the remote key to match the previously loaded SAP key ,even if MDM is processing the data it is not reflecting in data manager.
Is there any reason for this.
Appreciate your suggestion and tips on this.
regrds,
Reo

Hi Reo,
As ur requirement seems,In the second pass perform recording matching by select default import action as "<b>update null fields only"</b> for those data records which are matching and "<b>create</b> " for those data records which are not matching with previous data records from SAP system.
If you define "update null fields only", then only the key of the new record from NON SAP will get appended to the existing record. And if you select "create" then it will create new records and will apply NON SAP key on it.
Please check the remote key values using data manager.Key is applied in the records or not.
Remember that import maps are client specific. Remote key comprises of both key and client system.So be sure that you are connecting to two different client systems.
I have tried this and this is working fine on my system.
Thanks,
Shiv Prashant Dixit
Thanks,

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

I suggest you post your qeustion on the Microsoft Mac forums as it's their software you're having issues with and that's where the MS experts hang out
http://answers.microsoft.com/en-us/mac

Unparseable date Error in Mapping in PI 7.1

I am working on Proxy to SOAP in PI 7.1 version
I have input date as 2009-05-14T17:00:00-07:00 from ECC and I need to split the date as 2009-05-14 and time as 17:00
please find the error in mapping below
Compilation of MM_ECC_to_ISO_ClaimSearch_Req successful Unparseable date: "2009-05-14T17:00:00-07:00" com.sap.aii.mappingtool.tf7.FunctionException: Unparseable date: "2009-05-14T17:00:00-07:00" at com.sap.aii.mappingtool.flib7.DateTransformer.convertDate(DateTransformer.java:72) at com.sap.aii.mappingtool.flib7.DateTransformer.getValue(DateTransformer.java:37) at com.sap.aii.mappingtool.flib7.If.getValue(If.java:35)
Please let me know how can I get rid of this error
Thanks
PR

>
PR wrote:
> I am working on Proxy to SOAP in PI 7.1 version
>
> I have input date as 2009-05-14T17:00:00-07:00 from ECC and I need to split the date as 2009-05-14 and time as 17:00
>
> please find the error in mapping below
>
> Compilation of MM_ECC_to_ISO_ClaimSearch_Req successful Unparseable date: "2009-05-14T17:00:00-07:00" com.sap.aii.mappingtool.tf7.FunctionException: Unparseable date: "2009-05-14T17:00:00-07:00" at com.sap.aii.mappingtool.flib7.DateTransformer.convertDate(DateTransformer.java:72) at com.sap.aii.mappingtool.flib7.DateTransformer.getValue(DateTransformer.java:37) at com.sap.aii.mappingtool.flib7.If.getValue(If.java:35)
>
>
> Please let me know how can I get rid of this error
>
> Thanks
> PR
You need to convert the source date format into that of target date format....you need to use standard DateTransform function available in Messaeg Mapping......

Mapping Values to Data Type Enhancements in XI

I want to a map values from a source XML to a target XML but the target fields are data type enhancements and not that of the standard one. The target message is the message of a predilevered interface of SAP for the SNC product. We did some enhancements to a particular data type. The enhancement was done in a different SCV and points to the datatype in a different SCV. Now, the mapping is in another different SCV (since the SCV for the SNC content of XI cannot be edited). When I was trying to map the values to the data type enhancement in the message mapping, the enhanced/additional fields are not there.
How would I be able to map the values to the additional fields? Thanks in advance!

check this:
http://help.sap.com/saphelp_nw70/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/content.htm
The Integration Builder does not recognize changes to software component versions that have already been imported. Therefore, if you want to define dependencies between imported software component versions at a later date, you have to import the superordinate software component versions into the Integration Builder again. You will not lose objects that have already been created.
Not sure but this might help.
Thanks,
Beena.

Document data to be mapped against ERP data fields

Similar Messages

Maybe you are looking for