Document date in MIGO takes any date in past and future
All SAP Gurus,
We have a problem with Document date in MIGO taking any date in past and future.
We want to restrict this date, although this (document date) has no relation with posting of the document.
Can it be done?
Regards,
Hi
Check the below message setting if it works and set it to E mode
in mm-->Purchasing->environment data-->Define Attributes of System Messages->system messages----> New entries
00 06 028 Purchase order date is in the past
For future you may have to go for an enhancement. Check out
Regards
Edited by: samuel mendis on May 22, 2009 9:02 AM
Similar Messages
-
Document date is in the future in incoming Invoice
Hi,
When I create incoming invoice with Tcod MIRO this problem create
{Check - document date is in the future)
What I do in this case please tell me
Regards
Sunil.hi,
cHECK THE DOCUMENT DATE IF IT IS IN THE FUTURE I,E FOR EG A MONTH AHEAD.
Probably the system just askds u if u have to post the doc in the future date.
This should be just a warning message and not the error message.
This should allow u to proceed with MIRO.
Please proceed and see,
Regards,
Hope thsi helps.
Prasanna
Award if helpful -
Business scenarios where PO/GR/INV documents dates in past
Hi buddies,
Can someone please give me some business scenarios where we need to feed the PO/GR/INV document dates in past.
Regards,
Sachin NarvekarHi,
1. You can post an invoice to the last period of the previous year. The procedure is the same as for posting to the previous period.
You must note the following feature: If you post an invoice receipt before the goods receipt to the previous year, a balance results on the GR/IR clearing account. Since you cannot post a goods receipt to the previous year, this item cannot be cleared in the previous year. The open item is carried over into the current fiscal year as a balance carried forward; it can then be cleared by the goods receipt posting.
2. If the stock value shanges...
3. Price change...
4. Account Balancing ..in banking..
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 21, 2008 7:10 AM -
This is the first time i have brought an itunes voucher to use on my iphone, i have been able to redeem it and it shows up on my account but it wont take any money off it and it just keeps asking for my apple id all over agin and for my card details....... slowly loosing the will to live and all the help websites just use all these terms i dont understand, Any help will be much appreciated!!! Thanks
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Calculating batch sizes using past and future data
Hello all,
I have been a business analyst for the past 10 years on SAP working in many of the different areas surrounding supplychain.
I am looking for a way of ensuring that the business that I am working in are ordering parts in the most efficient batch sizes.
Is there a way in which I can use past consumption, order data and future demand to determine any adjustments that need to be made in the current batch sizes that we use.
Thanking you in advance,
Markcheck this:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d27eb44af11d182b40000e829fbfe/frameset.htm -
ABAP HR- How to retrieve employees in past and future date
I have a requirement in which i have to retrieve employees as mentioned below:
User provides value for KEY DATE on selection screen ( I am using PNPCE selection screen).
Now, i have to retrieve employees between date range (KEY DATE- 30 days ) and ( KEY DATE + 30 days) .
example : user provides 31.10.2009 as KEY DATE on selection screen . Therefore, i have to process all employees within date range 01.10.2009 and 30.11.2009.
I am using PNPCE logical database, Can anyone tell me how to achieve this by using GET PERAS event.
Thanks in advance!
Regards,
AleriaPN-BEGDA and PN-ENDDA will initially be the same date, if this is a custom program then before you do the GET PERAS statement you can make PN-ENDDA = PN-BEGDA + 30.
-
How do I stop updates uploading on my mobile please? Because I cannot take any photos at all on it as the iOS update program 7.0.3 is hogging up every inch of my mobile's space, not allowing me to keep my photos even though I've not that many anyway. Help?
Turn off Wifi in settings and then turn it on again; this will pause your device's update from updating.
To stop automatic updates of applications, go to settings, Itunes&appstore, scroll down to automatic downloads and turn off updates
Hope I've helped -
All past and future iCal data mysteriously wiped out???
I am still in denial, hoping that there is some fix for this:
I just noticed that my iCal calendar was suddenly (in the past hour) blank on my iMac. I had recently synced with my iPad, so checked there, and it was empty there too. I did not do anything special recently with iCal or settings, though I did purchase a few Apps through iTunes today (none of them calendar related). Luckily I also have an iPod Touch and my calendar there was still intact. I thought perhaps I could restore iCal with a sync - I carefully checked to make sure my settings would not lead to an overwrite of my iPod, and synced. And then what do you know but now my iPod iCal is also wiped out. I had never figured out how to set up Time Machine (just tried it again and no luck), and I was not using iCloud.
I am praying that there is some hope for me.
Thank you!
Caseycheck this:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d27eb44af11d182b40000e829fbfe/frameset.htm -
Document date of PO to be made unchangable
Hi,
In our system, user can make PO and give document date of past or future. I want that document date of PO can not be changed from today's date during making a PO. How can i do this?
Regards,
KalpeshMake the warring meass to error message
Go to SPRO MM -- Purchasing -- Environment Data -- Define Attributes of System Messages (ome0)
meassage no ME 039 make it error it will not allow to create with past daliveery date
regards
Edited by: Roy Anamika on Jul 17, 2009 12:16 PM -
Exchange rate should pick as per document date of GRN in MIGO
Dear all,
As per my client requirement while doing Material GRN in MIGO, system should fetch exchange rate as per Document date of the GRN.
As per standard now it is picking from posting date.
we already implemented Note number 574583. After implementation of this note system picking document date for MIRO and normal FI Documents(f-02) bur not for MIGO.
So suggest me how can we get document date as exchange rate translation date for MIGO
Note: Before posting this, i have searched for solution in SCN but i didn't get solution any where.
Regards
kishoreHi Amitesh,
Finally i am able to fulfill my client requirement with the help of you and SAP support. I have used SAP Note number 619330 and few configuration steps.
Thanks for your support and points has been given. -
Document date&Posting date Validation In MIGO Transaction
Hi,
I need to control document date should not be in future date comparing to posting date and should not be past date comparing to PO date in MIGO transaction.Pls suggest.
Regards
ManiDear Mani,
Goto Spro
Materials Management -> Inventory Management and Physical Inventory -> Define Attributes of System Messages
Goto Settings for System Messages and select
Version 00
Application area -- M7
Messages no -- 088 -- Document date lies in the future. (Check your entry)
Convert in Error Massage.
Regards,
PK -
I need help with 'Documents & Data' taking up all the space on my iPhone
Hello, I have searched for days on the internet for a way to solve my problem but nothing and I really mean NOTHING seems to work at all.
I can't buy any software either.
When I go into Settings>iCloud Documents & Data are off and have been off all the time. Yet I STILL have Documents & Data taking up 5 GB of my phone and I don't have much space either.
I have hopelessly tried deleting most of my messages and NONE and I mean NONE of the space has been given to me, nothing changed but my messages completely disappeared. No I do not use iCloud and I have the latest software updates. My phone is not jailbroken. I even tried deleting most of my apps and installing them again but that didn't work either. Photos take a small amount of space on my iPhone.
I really hope someone can help me this is a really big issue for me and I do not fancy resetting the phone back to its Factory settings.
I am new to the apple forum so sorry if this isn't in the right category or something. Thank you in advance. I also do not really fancy going all the way to the centre of the city to go to a Genius Bar.
By the way, a few minutes ago I tried backing up my iPhone and syncing it again and a message popped out telling me that I need additional 4 GB of space in order to let it sync and I do not understand this, Documents & Data take more and more of my space every time I look. Also all the messages I delete come right back when I turn the phone on and off.Hi demolitonlovers,
If you have unaccounted for data taking up storage space on your iPhone, you may find the following articles helpful in identifying what is taking up the space and how to remove it:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
- Brenden -
Reversed iCloud "Document & data syncing" settings
Hi there,
I do have a "really weired" problem.
Using 1 iPhone and 1 iPad (mine) and another iPhone (my wife's) on the same iCloud account.
1) docs (i.e. GoodReader or Pages) generated on my iPad show up on my iPhone, but not on my wife's iPhone. So, my wife's iPhone seems to be "separated" from the other devices, even it's on the same "account".
2) on my iPhone and iPad in "Settings -> iCloud -> Document & Data syncing" it has to be OFF to make Pages and GoodReader show iCloud. If I turn it ON, immediately there's no more iCloud availabe. So this setting is "reverse sensed".
What is more, when I go to "Settings -> iCloud -> Memory & Backup" all devices show the same "usage", only let's say 10MB used it Pages and GoodReader (which is true for my wife's iPhone) even on my iPad there's >10GB of files in GoodReader.
All devices newest iOS.
When I found out files didn't sync to my wife's iPhone (which had the "reverse sensing settings" problem too), I deleted the iCloud account, used a differen account, deleted that too and activated my iCloud account again. That helped switch from "reverse" to "normal" settings.
This didn't help on the other devices (my iPhone and my iPad).
Is there any "RESET on the server-side" to get things running correctly?
Thx & best regards,
PeterCorrection and one more explanation:
Let's say, my wife's iPhone has in GoodReader -> iCloud -> Folder A (with 10 MB) of data-files, but doesn't see Folder B & C,
My iPhone & iPad both have Folders B and C with 1 (not 10) GB of data files, but cannot see Folder A. Everything that's created / moved / deleted shows on the other device (as iCloud is supposed to), but not on my wife's iPone at all.
And what is more, the "Settings -> iCloud -> Memory and Backup" on my two devices shows "10MB used in GoodReader" even if it's 1GB of data in there and "Documents & Data settings" is (and has to be) switched OFF.
At the Genius Bar in Munich Apple Store they were quite puzzled and said there is a Server-Reset, does anyone know how to contact iCloud support for that?
Thx & best regards,
Peter -
No document date (VBAK-AUDAT) by default
Hi,
As the standard report VA05 reads the document date (VBAK-AUDAT) and this is a field which is hidden in the sales view at header level.
I want to avoid the systems proposes current date as document date.
I want to put it in blank and inside the log of sales order incompleteness procedure. So the user will enter it manually.
Thanks,Hi Enrique,
You can avoid the system to automatically propose a date for your VBAK-AUDAT field by enhancing the program MV45AFZZ user exit USEREXIT_MOVE_FIELD_TO_VBAK form routine VBAP_FUELLEN.
Use TCode OVA2 to change or create incompletion procedure at the order header level and assign it to your sales doc type(s) using TCode VUA2.
I haven't done it before but give it a try and let me know if this worked.
Regards,
Arnel Adordionicio -
Defaulting the Document date to system date while GR cancelation via MIGO
Hi All,
While canceling a GR via MIGO transaction, i manually change the Document date to system date, but after posting still the document date is showing the original document date when is was posted.
Is this is the standard behavior?
I have a requirement to make this date default to system date. But it is not considering the date which we centered in the screen.
Kindly help me to resolve this issue.
Srinu KaduriHi,
while doing GR cancellation,system will take only system date for example today will be in the document date.
With Regards,
Jaheer
Maybe you are looking for
-
.
-
Hi All, I have created a Master (Form with Navigation buttons) - Detail (table) with search region. Intially both regions show no data as expected. When I search for an entry in Master region - It shows the data in Master but not in Details region. W
-
How to keep leading zeros in numeric Keynote entries?
When I try to enter numbers that start with zeroes in a table, Keynote removes the zeroes. For instance, I type 007 and it gets "corrected" to 7. Also, for instance, when i type false in lower case, it gets changed to FALSE. How do I stop this? I fou
-
Hello, I was going to make a level select frame in my game, and to unlock the different level, you need to complete the previous level. I've done this, but I also want an effect on my button. So if level1 completed=true, it goes red, but if it's fals
-
Dear All, can system create multi batch number per line item while do GR posting .???? My scenario is : Normally we Procure the components in quantity basics and batch is get created one per line item. Now this components come in tape (electroinc ch