Document does not contain selectable items.

Hello Gurus,
My purchase team wanted to transfer plant from one plant to other.. and so they are creating STO , without any confirmation , while doing GRN 101 movement type Store person is facing error Document does not contain selectable items.
Please help to resolve the same.

Hi,
1) this should be posted in MM forum, not here
2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
Regards,
Tomek

Similar Messages

GR of Process order - Document does not contain selectable items

Hi Guru's,
While doing GR for process order, user is not able to do the GR because of the below message:
Document XXXXXX does not contain selectable items
The other user is able to do the GR. The status of process order is
REL PCNF PRC EXPL EXTS GMPS MANC PDLV. There is overdelivery tolerance so, the delivered quantity is more than ordered qty.
There is no auto GR setting, no COGI errors, no final delivery indicator, no authorisation issue.
What could be the reason for this ?
Thanks in advance.
Regards
Kalyan

Hi Dee Joy,
I am using MIGO for posting the GR. So, kinldy let me know what setting in MIGO needs to be done.
Regards
Kalyan

'Document does not contain any items' error while posting GR from BAPI

Hello Friends,
I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
Regards,
Rajkishor.

Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
Thanku very much all of you for your reply.

PO does not contain selectable item

Dear All,
I have created PO(ME21N) and also released(ME29N) but while doing GR(MIGO) the error comes"PO does not contain selectable item".
Please explain why error is coming where as i have filled all the mandatory data??
Thanks and Regards,
Baiju

While doing the GRN against the PO, if you are getting the error message u201CPO doesnu2019t contain any selectable itemsu201D, following may be reasons:-
1.PO may not be released.
2.The confirmation control tab may be blank, in that case selects the relevant key. If you are preparing the GRN against inbound delivery then select the confirmation control as inbound and prepare inbound delivery using VL31N.
3.If through rough GRN then prepare Rough GRN using VL41 and proceed.
4.If the delivery completion flag under delivery tab is set, then also you will get the same error message. In that case, uncheck the delivery completion flag and proceed.
Still issue persist, revert back.

Document does not contain any selectable items

Respected Gurus!!!
The following error popped up while trying to capture excise invoice. The allocation was with reference to purchase order / scheduling agreement.
"Document does not contain any selectable items"
Here are the other relevant details:
1. Material has been "chapterised!!"
2. Excise details have also been maintained for the vendor.
My issue is:
Why is it that when I am trying to find the purchase order before doing a goods, this error comes up?
I wish to directly do a "capture excise invoice" without a goods receipt.
Seeking help gurus
Jaideep

Hi,
First you have to post a goods receipt then capture & post Excise invoice using J1IEX.
Or you can post Excise invoice manual without referecne of purchase order.
But ideally you have to capture & post Excsie invoice after Goods receipt only where as only in case of Import you have to capture duties before GR through planned delivery cost using MIRO and after Godds receipt you can post the Excise invoice.

Playlist does not contain new items after sync.

We recently pruchased 4 new songs from iTunes on the iPhone.
All 4 songs were successfully downloaded. We Sync'd the iPhone with iTunes on a Windows PC. All 4 songs are now in the library on the PC.
We then used iTunes on the PC to add the 4 new items to an existing playlist. For what it is worth, we do all our playlist maintenance on the PC and then sync back onto the iPhone and our iPad because we find playlist maintentance on both mobile devices very clunky and time-consuming.
Once we added the 4 items to the playlist, we then sync'd the iPhone and the iPad with the PC again. It all went smoothly as normal. The new songs are in the 'songs' list on both the iPhone and the iPad. However, the playlists do not contain all the songs on either devices.
The iPad sync options are set to sync the entire music library. The iPhone sync options are set to only sync specific playlists - and I checked that the playlist that contained the new songs was selected for the iPhone.
I tried creating a new playlist on the PC with just the 4 new songs and sync'd it with the iPad - the new playlist appeared on the iPad, but it only had 1 of the 4 songs in it.
I added the same *new* playlist to the selected set of playlists to sync for the iPhone. The playlist appeared on the iPhone, but this time with 3 of the 4 songs (one missing). Random! Worse, frustrating!
When I expand the device tree in iTunes on the PC (with the device still connected) to see what it thinks is in the playlist on the device, it always shows the correct content - but when you look on the actual device the content varies as above.
Can anyone shed some light on what has happened here, and preferrably, how I stop this random behavior and get this all back on track.
I believe all the software and all devices is up to date. I am running iTunes 11.1.3.8 on Windows.
Thanks in advance for any help.

*** Update ***
We purchased another song on iTunes today. We added it to one of our playlists on the PC and sync'd the iPad. On this occasion the four songs we added to playlists yesterday all sync'd correctly. However the new song we purchased today did not sync into the playlist. I can't imagine why, but is there some kind of delay built into the sync'ing mechanism somewhere?

Document 4500016031   does not contain any selectable items

Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number:   ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO)   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o   The document items have already been processed
        (Suggest zero lines indicator set?).
o   the document items have been deleted or are blocked.
o   the document items have been created for a different plant.
o   (for reservations only) movements are not yet allowed for the
        reservation items.
o   (for reservations only) the document items are retrograde components
     of the order. These are posted using the order confirmations.
o   A confirmation must exist for the document items.
o   The document items must be released first.
o   The document is an R/2 document.
Procedure
Make sure your entries are correct.
o   If the system has already processed the total quantity, you can set
     the Suggest zero lines indicator. The system will suggest the
     quantity zero for the items that have already been processed.
o   If you have entered a particular item, cancel the item. If you do
     not enter an item, the system searches all of the open items in the
o   If the document is a purchase order, production order or a
     reservation, you can enter search criteria in the dialog box.
     You access the dialog box by choosing Enter with reference on the
     initial screen.
o   If the document is an SAP R/2 document, you have to cancel it
     manually by entering the reversal movement type.
Regards

Hi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK

Migo cannot be done " PO does not contain any selectable items"

Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kk

Hi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful.

J1IEX post than made error like does not contain any selectable items

Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022     The document items have already been processed
(Suggest zero lines indicator set?).
u2022     the document items have been deleted or are blocked.
u2022     the document items have been created for a different plant.
u2022     (for reservations only) movements are not yet allowed for the reservation items.
u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022     A confirmation must exist for the document items.
u2022     The document items must be released first.
u2022     The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022     If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin Shah

HI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful

Error msg, "Maximum selection does not contain value 9999999999.

Hi, I am getting this error wile doing Reclassification of HFM Movement.
Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "
in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009
Actually, We have converted the consolidation area from XX(2009) to YY(2010).
Before this task, user has performed the balance carry forward.
My Analysis is as follows:-
Method Used in this Reclassification
RECYX (Reclassify HFM Movement at YE lvl 10)
     TRIGGER
     Items : 100-299, 9900-9999
     HFM Movement Type : O200 to O300
     Posting Level : 10
     TARGET
     Items : 100-299, 9900-9999
     Move : O100C
     Posting Level : 10
     HFM CD2 and Asset type : Ticked
After TEST run in UCMON, the error message comes :-
The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700 etc.
Breakdown categories in Workbench
Maintained as "OPTIONAL, Initialized value allowed".
Single Selection
1A
1B
AR
GA
Default Selection
99999999999
BCS CUBE
HFM CD2 & Asset Type - coming blank
LOTR
HFM CD2 & Asset Type - Coming blank
Please help to go forward.
In Anticipation,
Deepankar Jain

Thanks a lot Dan for the reply.
Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type" is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
Please correct me if I am wrong.
Your replies on it are highly appreciated.
Thanks and Regards,
Deepankar

Help Solving: Does not contain a definition for 'Select'.....

Hi,
Need help solving a Task that returns a Task<IEnumerable<Writing>> so I can fill ObservableCollection<ViewModels.IWritingItemViewModel> Writings for my
Design Time Data Page:
<d:Page.DataContext>
<designTimeData:MainPageViewModel />
</d:Page.DataContext>
My constructor does this:
public MainPageViewModel()
var writings = this.GetGroupsAsync();
this.Writings = new ObservableCollection<ViewModels.IWritingItemViewModel>();
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
My var writings = this.GetGroupsAsync(); is:
public async Task<IEnumerable<Writing>> GetGroupsAsync()
await this.GetMenuDataAsync();
return this.Groups;
which in turn gets data from:
private async Task GetMenuDataAsync()
Uri dataUri = new Uri("ms-appx:///DesignTimeData/MenuData.json");
StorageFile file = await StorageFile.GetFileFromApplicationUriAsync(dataUri);
string jsonText = await FileIO.ReadTextAsync(file);
JsonObject jsonObject = JsonObject.Parse(jsonText);
JsonArray jsonArray = jsonObject["Groups"].GetArray();
foreach (JsonValue groupValue in jsonArray)
JsonObject groupObject = groupValue.GetObject();
Writing group = new Writing(
groupObject["UniqueId"].GetString(),
groupObject["IsHeaderInteractive"].GetBoolean(),
groupObject["ViewType"].GetString(),
groupObject["ModelType"].GetString(),
groupObject["Page"].GetString(),
groupObject["Title"].GetString(),
groupObject["Subtitle"].GetString(),
groupObject["ImagePath"].GetString(),
groupObject["Description"].GetString(),
groupObject["GroupId"].GetString()
foreach (JsonValue itemValue in groupObject["WritingMenus"].GetArray())
JsonObject itemObject = itemValue.GetObject();
group.WritingMenus.Add(new WritingMenu(
itemObject["UniqueId"].GetString(),
itemObject["Page"].GetString(),
itemObject["Title"].GetString(),
itemObject["Subtitle"].GetString(),
itemObject["ImagePath"].GetString(),
itemObject["Description"].GetString(),
itemObject["Content"].GetString(),
itemObject["WritingsId"].GetString(),
itemObject["GroupId"].GetString(),
Convert.ToInt32(itemObject["Item"].ValueType)
this.Groups.Add(group);
and I get this Error:
Error 5 'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a using directive or an assembly reference?)
I'm creating collections of:
public interface IWritingItemViewModel : Common.IVariableSizedItem
Models.Writing Writing { get; set; }
and my class for creating data is:
public class Writing
public Writing(
string uniqueId,
bool isHeaderInteractive,
string templateType,
string viewModelType,
string page,
string title,
string subtitle,
string imagePath,
string description,
string groupId
this.UniqueId = uniqueId;
this.IsHeaderInteractive = isHeaderInteractive;
this.TemplateType = templateType;
this.ViewModelType = viewModelType;
this.Page = page;
this.Title = title;
this.Subtitle = subtitle;
this.ImagePath = imagePath;
this.Description = description;
this.GroupId = groupId;
this.WritingMenus = new ObservableCollection<WritingMenu>();
public string UniqueId { get; private set; }
public bool IsHeaderInteractive { get; private set; }
public string TemplateType { get; private set; }
public string ViewModelType { get; private set; }
public string Page { get; private set; }
public string Title { get; private set; }
public string Subtitle { get; private set; }
public string ImagePath { get; private set; }
public string Description { get; private set; }
public string GroupId { get; private set; }
public virtual ObservableCollection<WritingMenu> WritingMenus { get; private set; }
How can I solve or successfully complete this code?
Thanks!...
Code is like a box of chocolates!...

I looked into your error message again, I found something interesting:
Error 5
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition
for 'Select'
and no extension method
'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a
using directive or an assembly reference?)
That means: Task does not contain the definition for Select. This was reasonable, Task does not inherit IEnumerable interface.
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
public async Task<IEnumerable<Writing>> GetGroupsAsync()
You need get the IEnumerable<Writing> for Select use. See this for more information:
How to: Return a Value from a Task
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Maximum selection does not contain value 600 of subassignment Subitem-error

Hi All,
I'm getting the following error when i tried to load the file through data stream.
Maximum selection does not contain value 600 of subassignment Subitem
Message no. UCD1038
Diagnosis
The posting item 11100100 has breakdown category BR01 for which a maximum selection was maintained for subassignment Subitem. The current posting value, however, is not in this maximum selection.
System Response
The posting is not possible.
Procedure
Check the maximum selection and the posting.
I have already refered the earlier threads but its of no use for me. I have checked my setting w.r.t to FS item breakdown category, Max selection in breakdown category and sub items all the setting are fine, even i applied the OSS notes no-1074599 still i'm facing the same issue.
Can any one help me with this regards, thanks in advance.
Regards,
Magesh

Hi Dan,
Yes, breakdown category has been assigned with a sub item category which in turn assigned to subitems and this sub item is a part of the sub item category which is assigned in max. selection.
Let me know if you want any more information on the same.
Regards,
Magesh

"The stylesheet does not contain a document element" error

Hi,
I'm using Hyperion Financial Management 11.1.1.3
I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
Error Number:-2147467259
Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
Error Source:msxml6.dll
Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
My environment is win server 2003 on a VM and EPM 11.1.1.3
Thank you and best regards,
Ahmed.

Hi taku,
Yes I've solved my issue.
Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
It's about "Managing Intercompany Transactions in Financial Management".
I wish you can solve your issue soon.
Best wishes,
Ahmed.

VL463 - No distribution: Delivery does not contain items relevant for dist

Dear Experts,
When we slect multiple Deliveries from VL06 and distribute, Only few get distributed and others fail.
The error log shows: VL463 - No distribution: Delivery does not contain items relevant for distribution.
However, If I select these deliveries individually or say 4 or 5 deliveries at a time and distribute, deliveries get distributed.
If I select more nunbers (ex: 12 or more), only 3 gets distributed and others fails with above message?
Any inputs on this are most welcome.
Regards,
Shetty

Hi,
Check in OVLK
Which distribution mode you maintained in delivery type it should be Distribution according to the settings for the warehouse number
Also check in Logistics Execution --> Decentralized WMS Integration --> Central Processing --> Application --> Activate Decentralized WMS.
Kapil

Eclipse problem selection does not contain main type

i m using eclipse3.3 and have set all the necessary paths in it
but when i run a simple java program just for displaying hello world but
the error comes
selection does not contain main type

You must have a class with a main method.
The main method must be public, must be static, must return void, must have parameter String [], and is case sensitive (so does Java).
Put this into your class
public static void main(String args[]) {
}Let me know if it answers your question.
Best regards.

Document does not contain selectable items.

Similar Messages

Maybe you are looking for