Document Editor X12 Document Type 5030

Hi All
One of our Customer requested X12 Document Type 5030.
But in Oracle B2B Document Editor i can see only up to 5020.
So can any one Please guide me how can i get X12 Document Type 5030 in to Document Editor.
Do i need to install any patches to get this ??
thanks
Ravi
Edited by: user598717 on Sep 21, 2009 1:37 PM

No with that patch we didn't get the 5030.
this is the message we got from the oracle support
I have Document Editor version 6.0.0.1476, and I still do not find EDI X12 version 5030.
I have contacted product management to get the EDI X12 update you need. In the meantime, I suggest you apply patch 5550097
to get you to 6.0.0.1476, which is required for the very latest B2B Server patches.
thanks
Ravi

Similar Messages

Unable to use B2B Document Editor tool to create guideline from data file

Does anyone successfully used the B2B Document Editor tool to generate the guideline doc from an HL7 data file ?
I attempted to use the SpecGenerator feature of this tool to create a guideline from the "a01.xml" sample file in the HL7 tutorials (came with the B2B installation" and the wizard kept on giving me "parsing errors" message below
"The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect."
Any idea why ? I did not alter the sample file in anyway -- its format is exactly the same as when it was installed.
Any helps are appreciate !!

Hi,
I would suggest that you learn the B2B product starting with the HL7 tutorial. Start by importing the export files and follow the instructions to make the system work end to end.
Next, you want to configure for the HL7 tutorial manually using the ecs and xsd files provided in the HL7 tutorial directory. Again, ensure that the system work end to end after you have done the manual configuration.
Next, you create a new ecs and xsd file using the Document Editor from scratch and use them in your manual configuration. You can use the same doctype and version as in the tutorial so that you can be familiar with the Document Editor and at the end of this exercise, you know you have done things properly if the system works end to end. The documentation for Document Editor is mainly in the Windows Help section.
After the incremental steps above, you will have the knowledge to implement the document type and version of your project. Going straight into the requirements in your project makes it difficult to debug because they are too many moving parts.
Hope this helps,
Eng

Unable to import gentran DDF file in B2B Document Editor

I am trying to import DDF file (available from a Gentran Integration Server) in to B2B Document editor (11.1.1.6 or 11.1.1.7). The DDF file has no external reference to a DTD file (and hence the first line resembles <!DOCTYPE GENTRANDDF> and not <!DOCTYPE GENTRANDDF SYSTEM "something.dtd">). While importing, I get an error "The element GENTRANDDF is used but not declared in the DTD/Schema".
Presuming the missing DTD for the above error, I created my own DTD (using Stylus or IntelliJ etc...), but that results in a variety of different errors.
Can anyone advise what type of DDF can actually be imported in to Oracle B2B ? The document is not very clear on this topic. There is a very old OTN community thread Import Gentran DDF but that also has no solution explained.
Regards

VAS_MS wrote:
please help me..First help yourself by posting a clear question
You have far to much code posted and without the use of the correct code tags its almost unreadable.
You have a question about uplaoding files with Struts then get rid of all the junk in your code thats not related to uploading files.
If you have an error then post the relevant information on the error
like
org.apache.commons.beanutils.ConversionException:
Cannot assign value of type 'org.apache.struts.upload.CommonsMultipartRequestHandler$CommonsFormFile' to property 'file' of type 'java.lang.String'
org.apache.struts.action.DynaActionForm.set(DynaActionForm.java:424)If you had posted only that you would have given enough information, that error says it all you are trying to put your file into a String and its not working.
reread the tutorial/documentation provided and try again
Edited by: pgeuens on 21-mrt-2008 8:04

B2B Document Editor License Key Issue

Hi,
I have downloaded Oracle B2B Document Editor from OTN and installed the same without any error but while trying to use it to generate B2B guideline files (ecs and xsd files), at the very first step we are getting the error saying -
*"This feature is not available with the current type of license. Please contact [email protected] to obtain an upgraded license key."*
As a result, it is not allowing further to create the guideline files i.e. we cannot use the software.
Have anybody faced this issue? Any idea about is it expected or why this is coming or how to get rid of this?
Note: Buying a license is not an option for me as I just want to evaluate the software.
Download link I have used: http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Thanks
Satyaki

Satyaki,
But as I understand installing b2b doc editor does not have any dependency with SOA installation as such and it can be installed at any Standard Windows machine with no SOA in it. So, has this concept changed in case of this latest version? Should the latest doc editor version can be installed only where soa is installed? Your understanding is correct. B2B Doc Editor is independent of SOA and that patch should be applied into SOA environment(SOA Suite 11g R1 (11.1.1.5.0)) release to use complete health care features in SOA which are already available in Doc Editor 11.1.1.5.0
Moreover, will the guideline files generated using this doc editor NOT work if used with soa suite version 11.1.1.3? You are not supposed to use B2B Doc Editor 11.1.1.5.0 version with SOA Suite 11.1.1.3.0
I will personally suggest you to use SOA 11.1.1.4.0 and B2B Doc editor 11.1.1.4.0 if you are working on any evaluation.
Regards,
Anuj

B2B Document Editor Global Replace for Requirement attribute

Hi Gurus,
I am having hard time to replace requirement attribute from required to optional to all segments and fields through B2B document editor.
Here is my scenario...
I am building a spec for "Application A" and it is expecting HL7 structure with all segments and fields are optionanl.
I tried with "Find & Replace" tool but when I select Segment and Field nodes it is not giving an option for "Requirement" (Search Atributes section)
Any trick?
Thanks,
Datla

Thanks Anuj,
It would be very helpful and save lot of time for us if we have that functionality in the tool. I am wondering what stopping in the tool to replace "Requirement" and "User Option" attributes as it is allowing to replace all other (Data Type, ID, Name, Position,Purpose, Repeats) attributes.
Thanks,
Datla

Is B2B document editor necessary in SOA suite 11g environment?

Hi All,
In my server, SOA suite 11g is installed, which include B2B engine also.For devoloping a POC in B2B environment, document editor is necessary or not?. Without document editor, is it posible to devolop a simple POC? I am completely new to this B2B environment.
Regards
Dd

Integration B2B forum is -
Integration - B2B
Document Editor is optional and will be used in case of B2B. For further clarification, raise a thread in B2B forum.
Regards,
Anuj

How do I save a pdf as a word document so I can type in it?

how do I save a pdf as a word document so I can type in it?

Hey David, add some security to it. You can even keep people from printing it if you want to, or even need a password to open it.
J.R.

Unable to change gl account in purchasing document rows of item type(8.8 ve

Hi all,
In previous sap b1 version ,in purchase document rows of item type -- system allows to change the gl account in rows.
But in current 8.8 it is missing ,can any one know how to activate this or is there any logical reason to lock this.
Regards,
Naresh K

Hi Chandra,
In some older version this was possible. This was changed as this is the stock account to avoid usage of incorrect account and valuation report issues.
If you want a specific stock account for the item change you can define that on the item master data. Set it to Item Level and then change the GL account.
Hope it helps,
Jesper

How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

Hi,
How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
Note : I have created custom Content Type since I have custom columns along with upload column..
Regards, Shreyas R S

go to library settings
Change new button order and default content type
set your custom content type to be #1
when you upload new document it will automatically have your custom content type
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

How to create parser schema in Oracle document editor 7.0.5

Hi All,
Could anyone please share how to create a parser schema from a given ecs( for delimited flat file) in Oracle document editor 7.0.5.
Thanks and Regards,
Prachi Negi

Your listener.ora may become something like this :
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /S01/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = <db name>)
      (ORACLE_HOME = /S01/app/oracle/product/10.2.0/db_1)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.148)(PORT = 1521))
SID_LIST_LISTENER1526 =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc1526)
      (ORACLE_HOME = /S01/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = <db name>)
      (ORACLE_HOME = /S01/app/oracle/product/10.2.0/db_1)
LISTENER1526 =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1526))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.148)(PORT = 1526))
)You'll have two listeners :
1. listener => port 1521
2. listener1526 => port 1526 (listener1526 is a free name, you can name it as you want)
To start/stop listeners :
$ lsnrctl start/stop => to start/stop listener on port 1521
$ lsnrctl start/stop listener1526 => to start stop listener on port 1526

Regards B2B Document Editor download

hi,
Im currently working on SOA Suite (11.1.1.3.0)version on windows XP platform.I extented JDeveloper into 11.1.1.3 by adding composite editor in order to work with soa suite 11g.
I want to download B2B Document editor. In Oracle Fusion middleware Runtime download section, i found B2B document editor download place where there will be three files namely disk1, disk2 and disk3 which approximatly 4 GB capacity. is it required to download all three disk files or dowload any specific disk according to patch set?
regards
ashok.v

Hi Ashok,
All three disks are required for installation. It is not based on release. For any question related to Oracle B2B or Oracle B2B document editor, raise a thread in Oracle B2B forum -
Integration - B2B
Regards,
Anuj

B2B Document Editor

Where is the B2B Document Editor?
I am reading Oracle® Fusion Middleware User's Guide for Oracle B2B 11g Release 1 (11.1.1)

Please refer below link to know more about Decument Editor (section 3.1 - Introduction to Oracle B2B Document Editor) -
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10229/bb_doc_ed.htm#CIHICIJI
Any queries related to this, are welcome in Integration B2B forum -
Integration - B2B
Regards,
Anuj

Document Management system - Document Type configuration.

Hi Friends,
We are have having document type same as Document class (Dock Type PDF = Dock Class PDF). Now we have to identify documents that are stored based on geographical location. Is there any possibilities to differentiate the based on different region by using Doument parts or some other ways?
Thanks in Advance.
-Thanks,
Ajay

Hi Ajay,
This can be possible by two ways;
1 you assign lab office for document type.
2 assign geographic characteristics to doument by way of classification in DIR.
for Lab office;
Goto SPRO-Cross appln comp-Doc management-Gen Data-define Lab / office. Here u have to define diff offices as per your geographic locations. Then in Doc type in field selection you have to make lab/office as required entry. By doing this u can search documents based on Doc type & Lab/office location.
for Classifcation;
You have to create geographic characteristic in CT04, and needs to assign tht to class in CL02 with class type 017. In DIR by classification tab you have to assign Geo char with Document. By this way also you can search document based on classification.
for less complex classification option 1st is advisable.
Please award points if above information is useful/solves your problem.
Pramod

Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

Kindly confirm on the following features of Iphone 4s..and advice me accordingly.
Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

You can easily compare any Nokia devices using the web sites, here is a comparison of the N8 from the Nokia UK site:
http://www.nokia.co.uk/gb-en/products/compare/?action=productcompareaction&site=64060&products=23301...
And similar from Nokia Developer:
http://www.developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_800,N8-00
Some information may be incomplete at present, since some device details were kept secret until the final moment of the launch so the pages have been prepared withoug all of the data.
Nokia Maps is available for Windows Phone at launch.
Multi-Touch(TM) is the registered trademark of another company, however Windows Phone does feature the common touch features such as swiping, pinch-zooming and so on.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Document Editor for EDI

Do we have to purchase separate licence to use Document Editor powered by EDIFECS

No not at all,
Please apply patch 5550097. The license expired on the initial released CD and This patch renews the license and enhances the editor.
The current patches are:
6488268 Oracle B2B
5550097 Document Editor
Note:
The above patches are a pair, upgrading the 10.1.2.0.2 installation and are accumulative and are Available on Metalink.
A new patch replacing 6488268, will be out shortly. Refer to:
http://www.oracle.com/technology/products/integration/b2b/index.html
for the latest patches.
regards
Jeff

Document Editor X12 Document Type 5030

Similar Messages

Maybe you are looking for