Document Flow for deleted |outbound delivery
Hi All,
I am facing with a very urgent issue. I hope somebody will be able to help.
Scenario:
I have a sales order. I have created outbound delivery with no picking and PGI done. By mistake one of the end user have deleted the outbound delivery. Now i want to find the sales order number of the deleted delivery. I have the deleted outbound delivery number.
Is there any way, I can look at the document flow or data in any table regarding this deleted delivery number?
This is an urgent issue. Please help
Hi
Once the delivery is deleted the references you are looking for a cleared
(LIPS-VGBEL, VGPOS) go with the deletion and the document flow link in VBFA
is also deleted. As mentioned the record of the deletion and what happened to the delivery
should still be available in VL22 as mentioned.
When a sales document is relevant for delivery it is written to table VEPVG.
So when you deleted the delivery the entry for the affected sales order would have been
restored to the delivery due index. You will find it in there but no where else now at this
stage.
I hope this helps
Kind regards
Brian
Similar Messages
-
Missing document flow for STO proc. delivery
Hi Experts,
I have problem with missing document flow for STO proc. delivery. I debugged VL10 and BADI (IF_EX_LE_SHP_DELIVERY_PROC~SAVE_DOCUMENT_PREPARE), I found that document flow parameters (CT_XVBFA) for this BADI interface is empty.
Any comments or solution.
Thanks,
SASD functional are satisfied with configuration.
Please advise.
Thanks,
SA -
Deleted outbound delivery doc displayed in document flow
Hello,
Deleted outbound delivery document is still displayed in document flow and its status is 'Archived'
I don't know why deleted document is seen and moreover I haven't ever seen such a status in document flow. For your reference, the delivery document is displayed in only VF02 or VF03 with its billing document, which is also cancelled. One more thing, its sales order is also deleted.
Thanks for your kind response in advance.Hi,
This is happening because invoice can only be cancelled and not deleted. While sales order and delivery can be deleted. So if you check the document flow of the cancelled invoice it will show the delivery number but with status as archived. If you try to display such documents you will get an error message 'Delivery xxx does not exist'.
If you delete a sales order and delivery which does not have an invoice this will not happen.
Regards,
Sajith. -
Return to vendor Error - Document flow for delivery cannot be updated
Hi Expert,
we have a issue - can't post "return to vedor" by MIGO.
The steps are following:
1. It is an STO between 2 plant within different company code;
But the planner wrongly set this STO as CONFIRMATION KEY REQUIRED.
2. The issuing plant didn't create the outbound delivery for this STO. And at the same time, the receiving plant directly post the Good Receipt for this STO by creating an inbound delivery.
3. Then we found this error, we decided to reverse this Good receipt, and then ask the issuing plant to open an outbound delivery, and the receiving plant post good receipt for the outbound delivery.
We met error when we tried to use 122 - return to vendor:
Document flow for delivery cannot be updated
Message no. M7352
Diagnosis
Purchase order 753486 is assigned to a delivery. The current transaction cannot update the document flow for this delivery, because the system does not recognize the delivery number.
System response
When you post this goods movement, the document flow is not updated in the delivery. This can lead to problems later on when you process the delivery.
Procedure
You can post the goods movement using transactions MB0A or MIGO (Goods receipt for a delivery) after you enter the delivery number.
If you are currently posting a cancellation, a return delivery, or a subsequent delivery for the material document, it is not possible to enter the delivery number.
Procedure for System Administration
See SAP note 361014: Message M7 352: What does it mean?
Please advice,
Thanks,Unfortunately, when I use MB0A and I input the delivery number under Find POs for Preceeding Document, it errors out as well as the delivery does not exist.
Any other option to reverse the GR? -
Cannot reverse GR. Error: "Document flow for delivery cannot be updated"
An STO has GI, GR and invoice verification. However, it appears the delivery was deleted such that when trying to reverse the GR, there is an error: "Document flow for delivery not be updated".
According to OSS Note 1499411, solution is:
Change your process so that the goods receipt (in stock transport order scenarios with replenishment deliveries) is always posted with reference to the replenishment delivery and never with reference to the purchase order.
If this is not possible and you have to work with the restrictions of a goods receipt with reference to the purchase order instead of the replenishment delivery, implement the attached corrections to be able to correctly post the GR reversal with reference to the stock transport order.
However, it does not say anything on how the GR of the existing STO will be reversed.
How will i reverse the GR in this case?
Thanks!
Best Regards,
ArmieUnfortunately, when I use MB0A and I input the delivery number under Find POs for Preceeding Document, it errors out as well as the delivery does not exist.
Any other option to reverse the GR? -
Hello all:
When attempting to PGI an inbound delivery (via VL06I - For Goods receipt - select inbound delivery - click Post Goods Receipt) I received error messgae VL 659:
Diagnosis
As the system was recording the document flow for the goods movement, it determined that the subsequent document number is either blank or identical to the number of the preceding document.
System response
In order to avoid inconsistencies, the goods movement posting was cancelled.
All WMS transfer orders tied to this inbound delivery are complete. This hasn't happened with any other delivery. Any suggestions as to what I can do?
Thanks,
BillHi,
I would suggest you to go trough OSS notes using the error message number as search key (e.g. 352243, 645119, 197864).
If you fail to find any maybe it would be worth of contacting SAP AG.
Regards,
Csaba -
Document flow for delivery can not be updated
Hi all,
I received goods for a PO and the PO has a subsequent OBD created. When I tried to reverse the GR I got the following error- document flow for delivery can not be updated
Can you help me understanding why this error occured?
Thanks,
RanaHi Rana,
In ECC 6.0 both ways you can do the goods moments (WRto PO/ Delivery) provided "Document flow update" check box checked in Logistics Execution-Shipping-Basic Shipping Functions-Configure Global Shipping Data
Please confirm
Nagesh -
Document flow for delivery cannot be updated !
Hi,
When i try to cancel a GR (GR upon an aoutbound delivery) with MIGO i had this error message :
"Document flow for delivery cannot be updated"
Please how to solve that ?
RegardsThanks,
in MIGO i try to reverse the matrial document of my GR
if it is not correct what must i choose in migo ? because when i choose cancellation, "Material document" is the only choice suggested by the system !
Please help. -
Document flow for a delivery created w/o reference_?????
Hi all,
Iam looking for a way to, trace the document flow for an delivery created w/o reference to a PO.(<b>tcode: vl01no</b>)
Is there any FM to do this. can you be more detailed.
Regards,
Ravi.
Message was edited by: RAVIKIRAN ReddyHi james,
when you run the FM with the delivery and client entries,
It gives back the delivery details but it does not give any details regarding the Doc. num,PO num etc.
The entries in VBFA_TAB doesnot show any such details.
I want all those to be displayed during document flow.
please, let me know how to proceed.
Thanks in advance. -
Error when creating document flow for delivery
Hi,
I would like to post the GR for Inbound delivery. I receive an error the TO is not confirmed. I have tried to confirm the tranfer order and I receive the "error when creating document flow for delivery . In order to avoid inconsistencies the goods movement posting was cancelled." It seems like the document already exist.
How can I do to confirm the TO and post the GR.
Thanks
DedeIn Inbound delivery after GR only a TO is created and confirmed.
So please check the PO history and see a GR is there or not .
Once a GR is found create a TO and do the confirmation -
Error while deleting outbound delivery
Hi experts,
To brief about the issue,we are trying to delete outbound delivery created with reference to sales order which was created with wrong line items .We are trying to delete the outbound delivery document but the system is showing the error " Topfile KT-STB2000-C1WW line item 000020 has the following missing components :STB2000-C10007R".BOM is created for the same line item KT-STB2000-C1WW with subcomponets STB2000-C10007R and KT-14000-148R.suggest the solution for the same
Thanks & Regards
subhashHi Reazuddin,
We are concerned only with deleting the OBD.Earlier there was a mismatch between material BOM and OBD sub-componets.The wrong sub-componets were taken from sales order.Later on we realized that we dont want these componets (it was mistake) in OBD since BOM has different components.Later on we realized our mistake and we have sychronized BOM components,Sales order components and OBD components and tried to delete the OBD,but the system gives error as explained in above query.The message number that we received is "ZW024".
Thanks & Regards
Subhash -
Report for listing all document flow for SD
Hi expert,
do you know any report from SAP or you have any sample report that can display and show all document flow for SD in one line...
let say in selection screen i have contract number... so when i key in by contract number all detail and flow will display e.g
conract 2000001 service order 3000000 delivery 4000000 invoice 5000000
thanks.
[SAP Notes & Tips|http://abap4beginner.blogspot.com/]hi,
thanks for the solutions. Did others have experience on this situation?
Thanks.
[Abap Notes & Tips|http://www.abap4beginner.blogspot.com/] -
Problem with IDoc for an outbound delivery
Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz SkorusHello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY -
Handling Unit not being assigned to TO for an outbound delivery
Hi All
When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO.
I cannot confirm the TO as it complains about the non assignment of HU.
I have done the following so far:
1. Set up a default packing material w.r.t WhNo and movement type.
2. Defined a packing group and then assigned the packing group to the packing material.
3. Set 1 to the indicator for automatic HU creaion in customizations for automatic HU creation.
Is there something I am missing in the configuration?
Any suggestions would help.
Thanks,
ArupHello,
HU never get assign at the time of creation of TO. You can assign pick HU at the time of confirmation of TO. There are two ways
Use transaction code LH01 and assign pick HU
OR
(ii)Or at the time of confirmation of TO click on pack tab and complete the packing
Thanks,
Milind C -
Is it possible to reterive the deleted Outbound Delivery details
Hi
I would like to know , Is it possible to reterive the deleted Outbound Delivery details like who deleted with date and time.
Can It possible to create Proforma invoice without Post Goods Issue (PGI) of Outbound Delivery.
Can it possible to delete Outbound delivery after creation of its proforma and excise Invoice.Thanks sridhar,
My prob is solved regarding deleted details.
Can we avoid , user can't delete the Outbound Delivery after creation of Proforma Invoice and Excise invoice. because OD is related to PRof and Excise inv.
Actually In case of Sale Order's OD user cant delete OD's. but in case of STO it possible.
Thanks and Regards,
Tapovardhan
Maybe you are looking for
-
In need of a flash/html5/quicktime audio/video media player for a website
Hello everybody, I'm looking to get some kind of audio/video media player for a website. I would like it to be customizable, and also most likely read a play list from some kind of text file or xml file. Normally, I would look for some kind of flash
-
Error Installing SAP Netweaver ABAP Trial version on windows XP
Dear all, I was trying to install SAP NEtweaver 7.01 ABP trial version with MaxDB. DB installed fine but it failed later. Below is the error I am getting in the log file. I don't know what went wrong. I don't see it installed thus I can not uninstall
-
Safari bringing machine to stand still
Hi I am finding safari keeps slowing down my whole machine, it starts fine but eventually the whole system will just come to a stand still and it doesnt matter which user account is being used i dont know if its certain sites but the system becomes s
-
VS 2013 Prof. edition always shows "Could not complete the action"
Hi all, When I open any .ascx file VS2013 always shows alert, and when I close, it shows it again. Could you help please? Thanks.
-
Does SCCM 2012 R2 Secondary and DP servers really need backup?
Hello to all. I'm involved on a SCCM 2012 R2 project that will install aprox. 20 SCCM 2012 R2 servers: 1 CAS, 3 Primary, 8 Secondary and 8 DPs (just SCCM runs on all these servers). As backup is licensed by Tb and cost is a restriction, I think th