Document Flow Functionality using two different Clients

Our Client wants a develop a functionality where document are stored in different SAP instances.
Example - FI document 123 is in client 100 and its original document is in client 200. Our client wants to go to original document in 200 from client 100. How is the best way to achieve this functionality and what are the challenges to implement it.
Regards
Nandkumar

Hi,
This will work correctly if you use XA drivers (XADataSource instances).
You can check the vendor docs to see what exact classes you need to deploy for each database.
Beware of the pitfall: if you don't use XA drivers then commit might very well appear to work, but rollback won't.
Also, don't forget to close the connections.
Hope that helps,
Guy
Atomikos TransactionsJTA - visit our new JTA forum at http://www.atomikos-support.com

Similar Messages

Printing document on LJ8150DN using two different weights of paper

I am being required by the US Postal Service to use a cover page on a document I mail for a non-profit. The cover page must be 80#. The remainder of the document is printed on 20# stock. The question is, does anyone know of a way I can put the 80# paper in one tray to print pages 35-36, while printing pages 1-34 on 20# paper from a different tray ? Again, this is a LaserJet 8150DN. I am printing the document from Adobe InDesign CS3. I don't think the computer details are pertinent to this question.

Well, my paper size is not listed, so I had to do a custom size. So, I put in the exact size of the paper, which is KG size (Japan photo size) and is 102 x 152 mm. I also have L size in there which is 89 x 127 mm. Then, I put the non-printable area size as zero on all four sides.
Is it simply that my paper dimmensions are wrong? I took it from the package and from wikipedia http://en.wikipedia.org/wiki/Photo_print_sizes
Perhaps I should use 100 x 150 for KG size?

Using two different datasource driver into a transaction

Hi all,
i have two database : one under Informix and another under Oracle.
Well, well, i have declared two datasources in my apllicationserver ( Sun ONE 7).
I have to use a session EJB to write into the two databases some data and i have to open an UserTransaction to deal with it.
The flow is :
- open the UserTransaction
- Get the connection from the first datasource
- launch the INSERT query in Informix
- Get the connection from the second datasource
- launch the INSERT query in Oracle
My doubt is : Will the transaction work fine even if i have to use two different connection from two different datasources ?
Using only one database the transaction work fine.
Cheers.
Stefano

Hi,
This will work correctly if you use XA drivers (XADataSource instances).
You can check the vendor docs to see what exact classes you need to deploy for each database.
Beware of the pitfall: if you don't use XA drivers then commit might very well appear to work, but rollback won't.
Also, don't forget to close the connections.
Hope that helps,
Guy
Atomikos TransactionsJTA - visit our new JTA forum at http://www.atomikos-support.com

CIsco ISE use two different local certificates for EAP

Hi Experts,
ISE 1.2.1.198
It is possible to use two different local certificates on cisco ISE, generated by two different root CA, for EAP?
Example:
1 - Microsoft CA for notebooks
2 - Different CA (public, openssl, other) for mobiles
And, in case it is possible, which will be the first one presented from the server to the client for EAP-TLS authentication?
Thanks
Andrea

Thanks for your reply,
i think i'll go for another pair of PSN for the mobiles
Andrea

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

Can you use two different apple ID's on one Ipad?

I would like to use two different apple id's on one IPAD. One apple ID is for work and the other is for personal use.

Read this.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
 Cheers, Tom

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can I use two different itune accounts on one computer?

Can I use two different itune accounts on one computer?

1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941)

Is there any way to switch between using two different phones?

I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
Is there any way to do that sort of thing with Verizon?
I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut). So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?

Michael_F wrote:
So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
4G SIM Information | Verizon Wireless

How can I use two different ToolTipUIs?

Hi,
I want to use two different ToolTipUIs depending (in my case) on the JRadioButton that the Cursor is hovering over. For some JRadioButtons, I want to use the default ToolTipUI, and for others I wish to display a large amount of text over multiple lines. It seems to me that this is not easily possible as ToolTipManager uses the same JTooltip for each component, so setting the UI for JToolTip will affect every tool-tip-text.
Does anyone know of a simple method to achieve this goal? Or can someone please correct me if my understanding is wrong?!
And yes, I do realise that I could just use the multi-line ToolTipUI for all tooltips.
Thanks,
Muel.

As a point of interest, does anyone know why JToolTip doesn't have a public setUI(ComponentUI) method? Most other JComponents have such a method. This is really annoying because it means you have to do 1 of 2 things:
1. Subclass JToolTip and subclass the particular JComponent
public class WrappableToolTip extends JToolTip {
     public void setUI(ComponentUI ui) {
          super.setUI(ui);
} //end class
// and the subclass of the JComponent
public class WrapToolTipRadioButton extends JRadioButton {
     public WrapToolTipRadioButton(String text) {
          super(text);
     public JToolTip createToolTip() {
          JToolTip toolTip = new WrappableToolTip();
          toolTip.setComponent(this);
          toolTip.setUI(new WrappableToolTipUI());
          return toolTip;
} //end class
2. Rank work around in particular JComponent
public class WrapToolTipRadioButton extends JRadioButton {
     public WrapToolTipRadioButton(String text) {
          super(text);
     public JToolTip createToolTip() {
          JToolTip toolTip = super.createToolTip();
          ComponentUI oldUI = UIManager.getUI(toolTip);
          UIManager.put("ToolTipUI", WrappableToolTipUI.class.getName());
          toolTip.updateUI();
          UIManager.put("ToolTipUI", oldUI.getClass().getName());
          return toolTip;
} //end classThis problem is really annoying, because I have to write 2 or 3 (depending on above methods) classes for something simple. If it were a different component, I'd just have to write 1 class - the UI class. Irritating!

Document Flow Functionality using two different Clients

Similar Messages

Maybe you are looking for