Document flow in Inbound delivery not updated as in PO History for the SA

Hi,
We have an SA with 2 line items. All GR's & IR's have been reversed for the line items in SA.
The document flow incorresponding  Inbound delivery is not updated correctly for these line items.
The GR have all been reversed with correct quantities. But, Document flow in Inbound delivery is not updated correctly.
Hence, the goods movement status for these shows as Partially processed and completely processed.
There is an inconsistency here.
Please advice

Hi
Have you post the GR through VL32N and reverse VL09?
Regards
Eduardo

Similar Messages

  • Service document in document flow of inbound delivery

    I need to delete an inbound delivery but system is not allowing me to do so .When I checked the document flow of inbound delivery,I found a service document is there, but I am not able to display teh service document,It says it does not exist,I even tried by ML81N.

    With the support pack in case if material is serialized for such plant you can post goods receipt only in VL32N which would happen only during 105 mvt type and you cannot post goods receipt using MIGO.

  • Document flow of Inbound Delivery

    Dear Gurus,
    We have upgraded to support pack SAPKH60018 from SAPKH60010.
    Earlier the process for goods receipt was followed as described below
    1. Purchase order
    2. Inbound Delivery
    3. GR in to Blocked stock against Inbound Delivery (mvmt type 103)
    3. Release GR blocked stock (mvmt type 105)
    Now after upgrading the support pack when GR blocked stock is made against the Inbound Delivery system is not updating the Document number in the document flow and PGR button is not disabled though 103 mvmt type document is made through migo.
    System is also not allowing to make the Release GR block stock through MIGO and prompting to use Inbound Delivery Dialog instead.
    Request for immediate assitance in regard to this issue.
    Regards
    Danish Alam.

    With the support pack in case if material is serialized for such plant you can post goods receipt only in VL32N which would happen only during 105 mvt type and you cannot post goods receipt using MIGO.

  • How to skip the Inbound Delivery while updating LA confirmations via EDI

    Hi Experts,
    I have a requirement wherein I dont want to create Inbound Delivery automatically when updating the LA (or a copied Conf Cat of LA) confirmation via EDI.  When we are using the message type DESADV, LA confirmations are being updated, but simultaneously, the Inbound delivery also being created.  My client desires that Inbound Delivery should not happen and only LA confirmation should be updated via EDI.
    Is there anyway, by which we can skip the Inbound Delivery while updating the LA confirmations in the PO?
    Thanks in advance
    Regards
    Radha Krishna

    Hi Prabhaharan,
    Thanks for your quick response.
    My requirement is to have both AB and LA confirmations.  I have included these two in a new the conf control   So, your suggestion will not work.
    Is there any other way out to fulfill my requirement?
    Thanks & Regards
    Radha Krishna

  • I have had to create a new iTunes account. However, there are updates that were not performed while under the old account. So now when I try to update apps, it's asking for the login of the old account, which I do not have.

    I have had to open a new account, however, there were App updates that did not get installed before I opened the new account. Therefore, when I try to do the updates, it's is asking for the sign-in and password for the old account, which I do not have this information. 

    All apps are tied to the Apple ID they are purchased with and is not transferable.
    Delete these apps and download them with the new Apple ID.

  • I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller  said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

  • I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

    I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

    Erdygirl please be aware you are posting to a public forum.  I have removed your personal information from your previous post.
    Please check your account at http://www.adobe.com/ to locate your serial number.  You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • How do I copy a document from pages into email (not pdf) and have color and format the same as the document created in pages?

    How do I copy an entire document from pages into email (not pdf) and have color and format the same as the document created in pages?

    Pages ’09 v4.3 and Pages v5.2.2 are entirely different document architectures. Consequently, copying and pasting a table from Pages ’09 circumvents the customary translation process  that would occur if you opened that Pages ’09 document in Pages v5.
    Make a backup copy of the Pages ’09 document that has the table in it, and then open this document in Pages v5.2.2. The table is translated into Pages v5 document format and displayed correctly. You can even select this Pages v5.2.2 table, and then copy/paste it into another Pages v5.2.2 document with accurate results.

  • Why can I not update my iPad first generation to the latest software?

    Why can I not update my iPad first generation to the latest software?

    Which version of iOS is supported is a decision made by each
    individual software developer. If there is an app that is not available
    in iOS 5, contact the developer to see if they can provide a version
    compatible with your iOS.
    Perhaps one of these links may help:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • Why Apple did not update Macbook pro retina spec for early 2014?

    Why Apple did not update Macbook pro retina spec for early 2014? I really want to buy new macbook pro retina.
    Very disappointing. I cannot wait. I will buy windows laptop because out of patient.

    Does the October 2013 model not meet your needs? What advances would you expect or see in a 2014 model?

  • Unable to open document. Please check to see if you have read permission for the above file.

    System:
    Adobe Acrobat X Pro, 10.1.2
    Windows 7 Enterprise, 32-bit
    Quad Core badass CPU
    4GB RAM
    MS Word 2010 (Office 2010)
    I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
    When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
    "Unable to open document:"
    "[document location]"
    "Please check to see if you have read permission for the above file."
    This happens after the little notice pops up "Starting the application which created the document...."
    If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
    It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
    "I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
    I have updated to the latest version 10.1.2 and still have this problem.
    This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
    This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
    If anyone has found the solution, please post it here.
    Thanks!
    B

    I think I found a solution. It seems to be relatet to normal.dotm.
    In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
    The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
    (By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
    I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

  • Error while updating HRA in infotype 581 for the employees.

    Hi,
    System is showing an error while updating HRA in infotype 581 for the employees.
    The error is No Automatic updation for IT0008. Allowance Grouping not found.
    What is this error. Please advice what to do in this case.

    Hi Deepthi,
    Check Table V_T7INA5,V_T7INA1,V_T7INA3 and V_T7INA9 also.
    Check it,
    Regards,
    Vinod.
    Edited by: vinod rao on Jul 30, 2008 1:23 PM

  • Beware the update of 2006-06-28 for the ipod nano!!!!!!!!!!!!!!!!!

    I ran this update and now the ipod never shows as connected
    and itunes takes forever to load (if it does (50/50 chance).
    The update window, looked ok, i clicked on update (realizing
    that all my playlist would be wiped out) and waited, and
    waited, etc, etc. Finally the update window blanked out
    except for the top bar. I assumed that it was done (has
    apple core never heard of a working or busy signal?)
    So i disconnected the ipod, rebooted and everything was
    slowed way down. Itunes still may or may not run. The one
    time i got itunes to run, it said the ipod or a folder was
    corrupt. The ipod never shows up in itunes but when i try
    to disconnect it (via the task bar icon), it says it cant
    be disconnected because a program is still using it.
    Need help (and BTY apple, get your act togeather!),
    thanks,
    savagcl

    I still not using the update.

  • I manage 60 ipads for a school using Apple Configurator. Need to update to iOS7 and AC1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new AC and iOS to work properly.

    I manage 60 ipads for a school using Apple Configurator. Need to update my devices to iOS7 and Apple Configurator to 1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new Apple Configurator and iOS7 to work properly.

    I always run a Time Machine backup before updating anything and recommend you run a backup as well. Paid apps should migrate over without any problem. If you have problems with VPP codes not transfering over properly, you can talk to your Apple SE or contact VPP for Education support and they can help you. While I haven't experienced any problems with updating, its never a guarantee that others will have the same experience.
    Good luck!
    ~Joe

  • HT201412 i have notes on my i phone and for the second time they dissapear, any one know why?

    I have notes on my iphone 5s and for the second time in a month the notes disappear.  any one know why?

        Hey Webbrowser.  I am sorry for the delayed response and that bluetooth and WiFi was giving your device some troubles. I hope that you had a nice vacation that you had a safe return.
    Are you still having issues with WiFi and Bluetooth?
    If so, please try resetting the network settings, http://vz.to/uLOEAI.
    After you update the network settings, please update us with results and let us know if the WiFi and Bluetooth are now working.
    NickB_VZW
    VZWSupport
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Publishing one iWeb project at a time?

    With iWeb I made a website and was able to publish it to a folder, public_html, which I then uploaded with Fetch. No problem. But then I made a second website project, highlighted only that one, and went through the same steps, but I ended up getting

  • A report that track price changes

    My User wanted a report to show the changes in List Price during sales order. They wanted to know what new prices are as compared to the price maintained in the system. This would helped them to review their pricing used by the sales admin. is there

  • Internet crashing on ipad 1 ?

    MY ipad 1 is crashing from safari and is slower since the operating system upgrade? is this a common problem?

  • FireFox 4 won't open our web app anymore?

    Hi. I notice that FireFox 4 won't load our web app. When I view the source it is blank? It's fine in FF 3, IE and Chrome

  • I've downloaded the trial Photoshop and Lightroom.  How do I upload my photos now?

    I can't figure out how to upload my photos to both Adobe Photoshop (General) and Lightroom for editing.  I just downloaded the trial period for both programs.  Can anyone help?