Document flow not showing material posted details in maint order
Dear Frnds,
In the refurbishment order document flow is not showing material posting documents. Plz guide me to correct the issue. Thanks for all your cooperation.
Guruprasad KS
Dear Thygarajan,
Thx for ur reply. Goods issue button is been ticked in "Define Documentation for Goods Movements for the Order". Still same issue. It is working in different client so i hope not an IMG issues.Plz give ur valuable feedback.
Guru
Similar Messages
-
Document Flow that shows Service Notification wrt Credit Memo Request
HI all,
Like VBFA, Is there any table that carries the Document flow of the service Notification and Credit Memo Request.
Document Flow that shows Service Notification wrt Credit Memo Request.
Help me on this.
Thanks in advance
ChakriWhat does service notification have to do with credit memo request? Nothing I think.
Service notification shows after you hit post goods issue on a delivery document that does not have any goods movement. I think it shows in the document flow based on the GI status field, not based on a record like in VBFA.
Regards
Rad. -
Document is not showing up group currency in the GL line item display
Greetings,
Could you please advice me as to why document is not showing up the group currency in the line item disply, when all other document posted to that GL are showing it.
Your prompt reply will be appreciated.Hi
select screen layout and copy gorup currency field.
Hope it will work
Regards
Murali -
Documents do not show up on iCloud.
My documents will not show up on iCloud. I am just trying to upload documents from my Macbook to iCloud, nothing that resembles science fiction or that requires a PhD in computer science.. I have done everything that the help section/faq's tell me to do, still nothing shows up on iCloud. I am new to Mac but this doesn't seem to be any different than Windows... Any suggestions? Thank you.
Welcome to the Apple Community.
If you could tell us what you have done and where it's not working how it should, we might be able to help you. -
my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?
Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen -
Appraisal document header not showing up in the Portal
when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
how can I show the appraisal document header in the Portal?
regards,
Tiberiu>
Chris Thomas wrote:
> Do you know how to set the template such that the Header is expanded (displayed) by default ?
>
> Chris
hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document. -
ANYONE HELP?????? Cover Flow not showing my artwork
I have the following problem but only with certain artwork, not all, I added images to all my files before and hardly ever did I get this problem(Cover Flow not showing my artwork), I usually added the same image or another image to make the cover flow "react", so to speak; the funny thing with my problem is that the files in question still have the artwork I put before in the Get info thingy, they appear whenever I see the info tab of the files, and when they're playing, the image shows at the bottom of the playlists list(above the repeat button and that), but the artwork doesn't show in the cover flow (-- =S ???--), no notifications show up about what's happening, and the image file I added is just a regular .JPEG from an album. In fact right now it's playing and the cover flow is still not showing the artwork, luckily this doesn't affect my iPod config and it shows there, but still it seems weird.
Now does this mean the iTunes is having some sort of behavior issues or it just fancies playing with me? =S*Why is artwork not showing on my iPod when it's there in iTunes?*
iTunes will display a cover in many of it's views provided at least one track from the album has embedded artwork. The iPod appears to load only the artwork from track one to create the cover flow and album views which means that it can sometimes fail to display art for albums even when you can see the art in iTunes. Further, when tracks are played on the iPod, artwork is displayed if and only if it exists in the currently playing track, so track one may show art while track two does not.
*How to find tracks without artwork*
To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/ss.php?sp=trackswithoutartwork for Macs. Use Google, Amazon, Discogs etc. to locate relevant images. Ideally these should be square, 320x320 pixels or above and borderless to give the best results in the various menus. If you have artwork for some tracks of an album, but not others, find the album in the main music folder, select a track with artwork, right-click (Option-Click for Macs) on the art & click copy, then select all the tracks of the album, use CTRL-I or Command-I to *Get Info* and then paste the image into the artwork box.
I say 320x320 because I believe (from using TouchCopy) that it's the size used in the iPod cache so if you're going to crop or resize you might as well work to that size. Otherwise 200x200 is probably good enough.
*Rebuild artwork cache*
Sometimes the artwork cache becomes corrupt and fails to show correct artwork, even when this is properly set up in iTunes. To rebuild the artwork cache, connect your iPod to iTunes. Locate the iPod in the Sources pane on the left-hand side, then select the Music tab. Remove the tick from *Display album artwork on your iPod*, sync the iPod, reselect the option & sync again.
tt2 -
Billing document should not be cancelled after creating return sales order
Hi All,
Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
Sudheer.Hi,
In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
Check and confirm.
Regards,
Ravi Duggirala -
Material Document no. not showing FBL3N Report
Dear Friends ,
Please note i have an issue, which the Material No. not showing in Referecne Key3 in FBL3n ( GR/IR )report.
Thanks & regards
Josephi have get corrected as i have add special field in menu settings BKPF-AWKEY.
-
SO document flow not display accounting file
Hi, I have a question with SO document flow don't display accounting file, the billing has posting , use FI report could display the accounting file, but not display in SO document flow, i don't know what question, where have a problem?
Hi,
R u activated document flow in following t-codes
VTAA
VTLA
Go in above t-codes slect u r source & target document >>> go to item level >>> select item >>> details >>> tickmark to update document flow.
Kapil -
Document flow not getting updated
Dear Experts,
I am facing a problem in document flow.
I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
Kindly advise.
Regards,
RandhirHi
Pls see the copy control sales document to sales document T.Code VTAA
Go to the item category and see the document flow field is activated or not if is not activated pls activate and re run the scenario
pls check your correct defined Z item category the document flow is activated or not.
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM -
FS10N GL Balances not showing line item details
Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledgerBig hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards! -
Document Flow not updated using BAPI_GOODSMVT_CREATE
Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga -
Document Flags not showing on Web Excel
We are using BW3.5 SEM4.0.
Documents are added to cells in planning layouts.
Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
Is there a solution to this? Thanks for reading.
WilliamHi guys,
I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
My 4 characteristics are WBS element, version, fisc per, and material.
Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
(I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
any help is appreciated
thanks,
martin -
Document Flow not updated in CRM from ECC
Hi Experts,
We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?Hi,
Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
Rgds,
-Sweta
Maybe you are looking for
-
I get Singed out of eBay.com when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in..if I click back it brings me back to "my eBay" and I am still singed in
-
Hello I have following problem and I am seaching for a soulution or statement: We use iFS 9.0.1.0.1 I have create my own parser. The parser look for MS Word document (doc). When I copy a MS Word document viva SMB anything is good. When I open a MS Wo
-
How do I change the BLOCKSIZE variable permanently?
I want to change the output when I do ls -s to 1024 instead of 512. How do I do this so it stays that way permanently?
-
I keep getting kicked out of my apps when using my IPad...any suggestions for a resolution? Thank you.
-
Hi To All There is a History Tab in Service Call...In which table the values from History Tab got stored....