Document flow not updated for Package Quote

Hi
I am creating a Packaged Quotation from Opportunity. After creation of document I see that document flow gets updated in Quotation but in an Opportunity it is not updated (in UI). Whereas in GUI it is being shown correctly. Please help me in resolving this.
Thanks & Regards
Hits

not required

Similar Messages

Originating document number not updated for one invoice line item

Hi,
We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
Best Regards,
Rohit

Dear All,
I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
Is there any other way to clear this document.
Thanks...

Document Flow not updated using BAPI_GOODSMVT_CREATE

Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.

Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga

SO document flow not updated with PR no created

Hi All,
A Purchase Requisitions is created from SO for a line item, i can see the PR generated in report ME5A but not in document flow. Is it a standard behavior or i'm missing something ??
Regards
Abhilash

Purchase requisitions are not updated in the document flow, just use SE16 and look at document flow table VBFA. it has 2 fields for document category VBTYP_V and VBTYP_N . If you use F4 on this field then you can see that the PR is not among the possible documents.
Use the status overview button instead and you can see the PR

Document flow not updated?

I have created a inter company Schedule agreement . Then supplying plant have done delivery and PGI against this after doing picking and transfer Order .
Now I am trying to do MIGO at receiving plant. While trying to save it's giving an warning message ''Delivery flow for delivery cannot be update'' .
1. Please expalin why document flow is not updated?
2. What I should do for updating the document flow?
Please advise.
Thanks

Thanks Warwick. But can you please explain the logic of this message.
Suppose I need document flow to be updated then what I can do.
Please advise.
thanks

Document Flow not updated in CRM from ECC

Hi Experts,
We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

Hi,
Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
Rgds,
-Sweta

Profit center Document is not created for Balance sheet items

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Dear all,
Profit center document is not created for balance sheet accounts , where i specified in 3KEH (default profit center for balance sheet a/c's) , i did n't do any changes , if i do any changes in dev , then i will transport to quality there is no pending requests
Same entry In quality environment profit center is updating and creating profit center document for balance sheet accounts . I compared with actual posting settings like Maintain Document Types and Define Number Ranges for Local Documents but it is same as development
regards
Govind
Edited by: Govind Yadav on Sep 24, 2008 8:33 PM

Is any body find the solution of this problem
I am also facing the same problem Profit center document is not getting created from any MM document
3KEH configuration is there but still the system not generating the Profit center document for those materials where there is no profit center assigned in the material master data and in 3KEH i have configured that it should post to dummy if there is no profit center in the material master data
Please tell me if some one have the solution to this problem
Bilal

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

SC Item in Transfer process active - follow on document status not updated

Hi Gurus,
    Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx' successfully. Checked the BE PO 45xxxxxxx that was created successfully.
Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
BBP_PD shows following statuses:
     I105   Awaiting Approval         X
     I1021 Created
     I1038 Complete
     I1106 SC ordered
     I1129 Approved
     I1111 Item in Transfer process
                    The last status I1111 is still active.
Any advise are welcome. Not sure if I am missing any OSS Notes.
Regards
Viktor Paul

Hi,
1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
the SC .. then use FM BBP_PD_SC_RESUBMIT.
3. none of these use normal process execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
Thanks,
prasad.s

Message server information not updated for SIDs in SMSY

How do I get the message server information updated for systems in SMSY?
I moved a system from one server to another but the information is not updating for the Java stack. The informatoin was updated successfully for the ABAP, but not the Java side. I've reviewed the SLD information and everything there is correct.
In change mode the information is greyed out, so it's updated automatically somewhere.
Thanks for any help.
Ryan

Hi Ryan,
         What's your solution manager version?
         Have you taken a look into this note?
         ->     1301106 SMSY: Enhancements and errors in Enhancement Package 1
        Within this note you will find another list of related notes that may fix your issue.
        Please take a look as there are many notes reporting similar issues, like:
       1298517   SMSY: Server of SCS instance not known in SMSY
       1273095   SMSY: Incorrect database server (Java)
Regards,
Daniel.

Revenue recongnized documents are not updated with trading partners

Hi SAP Gurus
Revenue recongnized documents are not updated with trading partners
Can any body help on this as it is priority issue
Regards,
suchithra

You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Document year not updated at the time of part I Posting

Dear Guys.,
At the time of part I posting the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
but i dont know the reason why this document year was not updated.
the field name and table tane is J_1iexchdr- DOCYR.
Excise Transaction type is GRPO.
because of this problem we can not able to do the invoice verification..
REgards
P.Anandhakumar.
Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

Timing
I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
might be going on.
https://forums.adobe.com/community/general/forum_comments
Yours has not been the only thread where I have had these problems.
ATR

Accounting documents are not posted for Excise invoice

Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..

hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range

Document is not relevant for billing

Dear All,
We are implementing ECC 6 in one of our client.
Our client manufacturer of x finished product, they want monitor the production process through Project system and deliver should be through project system,
We did the complete configuration from Production order till delivery in PS is working fine.
But when we try to post billing document from the delivery document, the system is showing the following error,
Document is not relevant for billing: LP is not relevant for F2.
Our doubt is in this process, whether excise invoice will be generated or not?
this LP is hard coded in SAP, We are unable to rectify the error,
our GO-LIVE date is 1st March
can any one help us to solve this issue?
Thanks in advance
regards
Elango

LP is not relevant for F2
What is LP ?? Is it Delivery type or Item Category ?? Nevertheless, copy control is missing in VTFL.
whether excise invoice will be generated or not?
If physical material movement is there from a manufacturing plant to outside, then definitely, you should generate an excise invoice
thanks
G. Lakshmipathi

Document flow not updated for Package Quote

Similar Messages

Maybe you are looking for