Document Flow not updated using BAPI_GOODSMVT_CREATE

Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.

Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga

Similar Messages

  • Document flow not updated for Package Quote

    Hi
    I am creating a Packaged Quotation from Opportunity. After creation of document I see that document flow gets updated in Quotation but in an Opportunity it is not updated (in UI). Whereas in GUI it is being shown correctly. Please help me in resolving this.
    Thanks & Regards
    Hits

    not required

  • SO document flow not updated with PR no created

    Hi All,
    A Purchase Requisitions is created from SO for a line item, i can see the PR generated in report ME5A but not in document flow. Is it a standard behavior or i'm missing something ??
    Regards
    Abhilash

    Purchase requisitions are not updated in the document flow, just use SE16 and look at document flow table VBFA. it has 2 fields for document category VBTYP_V and VBTYP_N . If you use F4 on this field then you can see that the PR is not among the possible documents.
    Use the status overview button instead and you can see the PR

  • Document Flow not updated in CRM from ECC

    Hi Experts,
    We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

    Hi,
    Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
    Rgds,
    -Sweta

  • Document flow not updated?

    I have created a inter company Schedule agreement . Then supplying plant have done delivery and PGI against this after doing picking and transfer Order .
    Now I am trying to do MIGO at receiving plant. While trying to save it's giving an warning message ''Delivery flow for delivery cannot be update'' .
    1. Please expalin why document flow is not updated?
    2. What I should do for updating the document flow?
    Please advise.
    Thanks

    Thanks Warwick. But can you please explain the logic of this message.
    Suppose I need document flow to be updated then what I can do.
    Please advise.
    thanks

  • VBFA not updated using BAPI_GOODSMVT_CREATE

    Hi,
    I'm using the function BAPI_GOODSMVT_CREATE to do a goods receipt for the outbound delivery as the replacement for MIGO (movement 101). The movement is created in the table MSEG but it doesn't update VBFA.
    There is someone another function to do this?
    Thank you in advance

    Outbound delivery is a goods issue, not goods receipt. Why do you need to do a receipt and how could you even do that?.. Are you sure it is not an inbound delivery?

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all,
    This is a question related to Change document.
    I created one custom Change document object ‘ZBUDGETS’.
    As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’.
    I included some of the authorized fields from FMIT table on which we placed the trigger.
    And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
    Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
    the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
    Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
    Prabhakar

    CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
    You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
    Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
    -Kiran
    *Please reward useful answers

  • SC Item in Transfer process active - follow on document status not updated

    Hi Gurus,
        Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
    In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx'  successfully. Checked the BE PO 45xxxxxxx that was created successfully.
    Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
    BBP_PD shows following statuses:
         I105   Awaiting Approval         X
         I1021 Created
         I1038  Complete
         I1106  SC ordered
         I1129  Approved
         I1111 Item in Transfer process 
                        The last status I1111 is still active.
    Any advise are welcome. Not sure if I am missing any OSS Notes.
    Regards
    Viktor Paul

    Hi,
    1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
    2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
    the SC .. then use FM  BBP_PD_SC_RESUBMIT.
    3. none of these use normal process  execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
    Thanks,
    prasad.s

  • Iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgraded application.

    iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgrader application.  Repeatedly says it can't locate photos even when told to cancel.  I think the photos in question are in Nikon RAW format.

    iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
    iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
    You need to do the following:
    1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application. 
    2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
    3 - launch iPhoto 9.5 to open and finish the conversion of the library.
    OT

  • Measuring point/document is not updating

    Dear all,
    I am  new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
    1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
    2) Then i have assigned this equipment as a PRT in the routing of material .
    3) Production order confirmation via co11n  Each unit
    Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
    STILL not answered and no reply.
    I am waiting for reply.
    Thanks
    tarun
    Edited by: tarun on Oct 5, 2010 5:06 PM

    Hello,
    Have look this thread [Re: Auto Update of measuring point/document;
    Regards,
    Rakesh

  • Revenue recongnized documents are not updated with trading partners

    Hi SAP  Gurus
    Revenue recongnized documents are not updated with trading partners
    Can any body help on this as it is priority issue
    Regards,
    suchithra

    You might try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Document year not updated at the time of part I Posting

    Dear Guys.,
                        At the time of part I posting  the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
    but i dont know the reason why this document year was not updated.
    the field name and table tane is J_1iexchdr- DOCYR.
    Excise Transaction type is GRPO.
    because of this problem we can not able to do the invoice verification..
    REgards
    P.Anandhakumar.
    Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

    Timing
    I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
    I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
    in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
    might be going on.
    https://forums.adobe.com/community/general/forum_comments
    Yours has not been the only thread where I have had these problems.
    ATR

  • Document flow not getting updated

    Dear Experts,
    I am facing a  problem in document flow.
    I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
    For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
    Kindly advise.
    Regards,
    Randhir

    Hi
    Pls see the copy control sales document to sales document T.Code VTAA
    Go to the item category  and see the document flow field is activated or not if is not activated pls activate  and re run the scenario
    pls check your correct defined  Z item category the document flow is activated or not.
    Thanks.
    Vasu
    Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM

  • SO document flow not display accounting file

    Hi, I have a question with SO document flow don't display accounting file, the billing has posting , use FI report could display the accounting file, but not display in SO document flow, i don't know what question, where have a problem?

    Hi,
    R u activated document flow in following t-codes
    VTAA
    VTLA
    Go in above t-codes slect u r source & target document >>> go to item level >>> select item >>> details >>> tickmark to update document flow.
    Kapil

  • Clearing document no. not updated in GRIR account

    Hello all.
    We recently found that there are some errors in clearing for GR/IR.
    I have taken two examples as below;
    -          The GR 5002308346 appears in our download even though that GR has been already used to post invoices.
    The Doc 5101039178, a line item is still open of amount 115.89 EUR even though that doc is cleared.
    In both cases the clearing doc no. is not updated in the GRIR account line item.
    Points will be awarded
    regards
    jaya

    Hi,
    Is automatic clearing executed and it has cleared them? Is it displaying as open item or closed item in line item display - FBL3N.
    If the document is already cleared and clearing document number is not updated, check for OSS notes.
    Thanks
    Murali.

Maybe you are looking for