Document flow not updated?

I have created a inter company Schedule agreement . Then supplying plant have done delivery and PGI against this after doing picking and transfer Order .
Now I am trying to do MIGO at receiving plant. While trying to save it's giving an warning message ''Delivery flow for delivery cannot be update'' .
1. Please expalin why document flow is not updated?
2. What I should do for updating the document flow?
Please advise.
Thanks

Thanks Warwick. But can you please explain the logic of this message.
Suppose I need document flow to be updated then what I can do.
Please advise.
thanks

Similar Messages

Document flow not updated for Package Quote

Hi
I am creating a Packaged Quotation from Opportunity. After creation of document I see that document flow gets updated in Quotation but in an Opportunity it is not updated (in UI). Whereas in GUI it is being shown correctly. Please help me in resolving this.
Thanks & Regards
Hits

not required

Document Flow not updated using BAPI_GOODSMVT_CREATE

Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.

Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga

SO document flow not updated with PR no created

Hi All,
A Purchase Requisitions is created from SO for a line item, i can see the PR generated in report ME5A but not in document flow. Is it a standard behavior or i'm missing something ??
Regards
Abhilash

Purchase requisitions are not updated in the document flow, just use SE16 and look at document flow table VBFA. it has 2 fields for document category VBTYP_V and VBTYP_N . If you use F4 on this field then you can see that the PR is not among the possible documents.
Use the status overview button instead and you can see the PR

Document Flow not updated in CRM from ECC

Hi Experts,
We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

Hi,
Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
Rgds,
-Sweta

Unable to proceed in change document are not updating in CDHD, CDPOS tables

Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
Prabhakar

CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

SC Item in Transfer process active - follow on document status not updated

Hi Gurus,
    Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx' successfully. Checked the BE PO 45xxxxxxx that was created successfully.
Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
BBP_PD shows following statuses:
     I105   Awaiting Approval         X
     I1021 Created
     I1038 Complete
     I1106 SC ordered
     I1129 Approved
     I1111 Item in Transfer process
                    The last status I1111 is still active.
Any advise are welcome. Not sure if I am missing any OSS Notes.
Regards
Viktor Paul

Hi,
1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
the SC .. then use FM BBP_PD_SC_RESUBMIT.
3. none of these use normal process execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
Thanks,
prasad.s

Revenue recongnized documents are not updated with trading partners

Hi SAP Gurus
Revenue recongnized documents are not updated with trading partners
Can any body help on this as it is priority issue
Regards,
suchithra

You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Document year not updated at the time of part I Posting

Dear Guys.,
At the time of part I posting the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
but i dont know the reason why this document year was not updated.
the field name and table tane is J_1iexchdr- DOCYR.
Excise Transaction type is GRPO.
because of this problem we can not able to do the invoice verification..
REgards
P.Anandhakumar.
Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

Timing
I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
might be going on.
https://forums.adobe.com/community/general/forum_comments
Yours has not been the only thread where I have had these problems.
ATR

Document flow not getting updated

Dear Experts,
I am facing a problem in document flow.
I create order (for free goods order type ZFRE), do delivery and finally billing.Outbound delivery is showing as "Being Processed".While I have maintained "Update document flow" in item level in copy control.
For your information, this is free goods order type and the system has been configured in such a way that accounting docs are not generated after billing. (As it is for free goods.).Could this be because accounting docs are not being generated?
Kindly advise.
Regards,
Randhir

Hi
Pls see the copy control sales document to sales document T.Code VTAA
Go to the item category and see the document flow field is activated or not if is not activated pls activate and re run the scenario
pls check your correct defined Z item category the document flow is activated or not.
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 8, 2010 12:09 PM

SO document flow not display accounting file

Hi, I have a question with SO document flow don't display accounting file, the billing has posting , use FI report could display the accounting file, but not display in SO document flow, i don't know what question, where have a problem?

Hi,
R u activated document flow in following t-codes
VTAA
VTLA
Go in above t-codes slect u r source & target document >>> go to item level >>> select item >>> details >>> tickmark to update document flow.
Kapil

Automatic payment program (F110) document are not update in PAYR table

Hi all,
I have make payment in F110 (automatic payment) to customer
But it is not update in PAYR table
Please guide me what I have to do for documents update in PAYR table
Thanks and Regards,
Prudhvi

Hi,
It is possible to enter multiple documents.
You can enter a list of single documents or in intervals.
Enter the document number in ascending order.
Ex:
Individual documents.
10001,10003,10011
If the documents are in a sequence you can enter the Interval like this
(10001,10011)
Hope it helps you
Regards
Andrew
Edited by: Andrew J on May 28, 2009 4:26 PM

Clearing document no. not updated in GRIR account

Hello all.
We recently found that there are some errors in clearing for GR/IR.
I have taken two examples as below;
- The GR 5002308346 appears in our download even though that GR has been already used to post invoices.
The Doc 5101039178, a line item is still open of amount 115.89 EUR even though that doc is cleared.
In both cases the clearing doc no. is not updated in the GRIR account line item.
Points will be awarded
regards
jaya

Hi,
Is automatic clearing executed and it has cleared them? Is it displaying as open item or closed item in line item display - FBL3N.
If the document is already cleared and clearing document number is not updated, check for OSS notes.
Thanks
Murali.

Originating document number not updated for one invoice line item

Hi,
We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
Best Regards,
Rohit

Dear All,
I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
Is there any other way to clear this document.
Thanks...

Document flow not updated?

Similar Messages

Maybe you are looking for