Document for deployment descriptor and config

Hi,
I just downloaded wls8.1. I am browsing the online document. I ca't find any document
on config.xml (there is one in 70). I can't find the deployment descriptor too
like application.xml, weblogic-application.xml
Thanks

more info at:
http://e-docs.bea.com/wls/docs81/programming/app_xml.html
"Erik Johnson" <[email protected]> wrote:
>
application.xml documentation at:
http://e-docs.bea.com/wls/docs81/programming/app_xml.html#1007302
"Erik Johnson" <[email protected]> wrote:
Documentation on config.xml at:
http://e-docs.bea.com/wls/docs81/config_xml/overview.html
"Jen " <[email protected]> wrote:
Hi,
I just downloaded wls8.1. I am browsing the online document. I ca'tfind
any document
on config.xml (there is one in 70). I can't find the deployment descriptor
too
like application.xml, weblogic-application.xml
Thanks

Similar Messages

R12 TOI documents for AR, AP and GL

Hi,
From where do I download R12 TOI documents for AR, AP and GL modules?
Any pointers in this regard would be helpful.
Thanks.

If your employer is a Oracle Partner, you will have access to many TOI sessions on ilearning.oracle.com.
If not, you can access Oracle documentation at
http://www.oracle.com/technology/documentation/applications.html
Thanks,
Anil

Appropriate directory for themes, logs and config files

Hello, I would like to know what would be the appropriate directory to place a application's config directory that contains themes, logs and config files for that application.
I want that directory to be accessible but since ~/Library is now invisible on Lion, that kinda rules it out for accessibility. The only place left now would be ~/Applications, but I don't think it was intended for that.
There is also an invisible config file that contains the path to the config directory and that's what the app uses to know where the config directory is located. The current emplacement of that config file is in the home directory, which I think is not in accordance to Apple's guidelines. So where should I place that file?
What should I do?
Thanks

Whee wrote:
I wish I could choose both of your answers as being the good one.
Thanks for the additional info about the Home and Documents directory, that clears a lot of things up. I needed to know that too. Do you know where that documents is located now? http://developer.apple.com/library/mac/#documentation/MacOSX/Conceptual/BPFileSy stem/Articles/WhereToPutFiles.html
Apple prefers you use the system API for these things. Here is one document that explains it.
So even though I won't use NSDefaults because what I am working on is a cross Platform app that is in C, I will put the config file in ~/Library/Preferences and the config folder in ~/Library/Application Support.
Almost everything has a C equivalent. You can use CFPreferences instead. I strongly urge you to use one of the system APIs instead of trying to write your own files. For one thing, the user can put their home directory virtually anywhere they want. For another, Lion is rewriting the underlying architecture with the new screen sharing and iCloud. If you use the system APIs, your program will work properly with any new technologies or custom network settings.

Functional Specification Documents for SAP Sales and Distribution

Dear Gurus,
I am having the problems of Invoice Output..... the default out put generated by the SAP is completely different from the hard copy of the Invoice of the Client. ppl say that I have 2 take the help of ABAPers to define the smart forms for the invoices of different company codes.... i had conversation with the ABAPers.... butthey are asking the format, wht ever the change we are looking for..... I am not be able to get the exact format.... how 2 provide this to ABAPers in FS format.
can any one pls send me ( or provide me the link to download the same from the SDN website) these Functional Specification Documents for Sales and distribution.
Wishes,
Abhishek

Hi there,
1st try to understand what is a functional specification doc before asking for it.
Functional specs is a doc in which you include what is the business requirement. If it requires a change to change to existing configs / code, then you will give the progs & the location where you will need to change. If the requirement is a totally new one, then yuo will explain the requirement in detail & possibly give the progs / code if there are any.
In your case, your client has a specific invoice format which is different from which SAP gives, in such cases, you will need to define a new Invoice output for eg ZINV. Define it as a print output. You will need to define a new print prog for the new output in which you will call smart forms to define the layout & fields.
Ask your business user to send the invoice copy which he has. Scan it & include it in the functional specs which you prepare. Mention all the fields which you want in the layout. Ask the ABAPer to code the invoice format in the same way. ABAPer is free to define any convinent name as per the guidelines (which he will be aware). You will need to assign that in the form routines of the output.
As a functional consultant you will need to give the field mappings (from where you get the data) for all the fields which you wish to print in the output. All that should be included in the func specs.
So there is no standard func specs that you can follow. Each func specs varies on the requirement. So dont ask these kind of questions in SDN forum. If you dont know how to define func specs, ask how to define. Dont ask people to send the sample func specs. Thats against the rules of conduct.
Regards,
Sivanand

EJB references in deployment descriptors and weblogic heuristic on resolving links

There are two different ways to lookup home interfaces using JNDI.
1. Query JNDI tree at runtime using some initial context.
2. Use <ejb-ref> in deployment descriptor for all the refrenced EJBs and then
use initCtxt.lookup(java:comp/env/BeanHomeName).
The second approach is recommended as most of the EJB vendors resolve these referenced
EJBs at deployment time and it becomes much faster as compare to lookup in JNDI
as EJB refrences or links can bypass querying the JNDI.
Does anyone know if Weblogic (5.1 sp9 or higher) resolves these links at deployment
time or not?

Hi Sami,
Run your question by the folks in the EJB newsgroup and see if they can
offer some assistance:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.ejb
Thanks,
Bruce
sami titi wrote:
>
Bruce,
Thanks for your prompt reply. We have resorted to using a startup servlet much
like we do in CA. However, we're still faced with the second issue which is related
to not being able to lookup the EJB after it has been included in an EAR file
now. Is there any setting we're missing?
Thanks
Sami
Bruce Stephens <[email protected]> wrote:
Hello,
Please correct me if I'm not understanding your question, but you are
looking for an easy way to pass initialization parameters to your
webservice? This is not currently supported, however it is on the wish
list for the next major release.
The workaround is to use a handler or read your init params from a
file. If you backend is java class, then you can put file loading:
1. in the constructor
2. in init() method if you java class implement
javax.xml.rpc.server.ServiceLifecycle
Regards,
Bruce

Automator script search document for file name, and rename file to date

Hi all,
I'm having a hard time with Automator... and I can't figure out how it's done!
Searched the web for it a couple of times, spend hours with Automator already, but I guess my need is random!
The thing is:
I got a folder with 1066 files, all the files has random names.....
I got a document (now it's html, but can convert it to PDF or txt or so ever....) with the coressponding random file names in the html.... some words before that there is the date the photo was taken in this format: 08/25/11
Now I want somehow make automator search that folder each filename... match it in the document with the filename, and rename the files in the folder to the date the photo's were taken.... and that for all 1066 files.....
anybody a great idea? Some help? I'm a real newby at Automator scrips!
thanks

Have you considered A Better Finder Rename 9?
A Better Finder Rename 9: The Batch File Renamer for Mac OS X
Otherwise, what you propose seems to be rather like carving the Pieta using a plastic butter knife. But, if you want, here's one example of a rough algorithm to start ...
* translate the HTML to ASCII text in this format: filename (date)
* read one line at a time from the ASCII file
* for each line, search the folder for the file
* rename the file according to the (date)
BTW, you might avoid a strict renaming according to just the date.
Best luck with this project.
JJW

Can i consolidate all of my comments to the top of the document for a summary and then have these linked to the position in the doc, using adobe reader on i pad?

HI, can i consolidate all of my comments in a document to the top for quick review and then click on each ro jump to the posi in the text? I am using adobe reader for ipad. Thanks

Hi Steve,
Thanks. I have it sussed. I saved from Ipad to Acrobat.com, but the functionality in AC.com is crap so I download to hard drive and open with reader on my hard drive and that way can see the comments. I'm sure there is a better way to do this so will keep playing around with it.
Also, do you know how I can include my text comments in IPAD PDF in the search function of PDF reader for IPAD? Say for example I want to search for the word action through a 200 page document. It won't search the comments as nothing found when I search through a scanned document.
Thanks again,
Graeme
Perth WA

Create one invoice document for factory sales and third party sales

Hi All,
I want to create one single invoice document for material sold from factory and from third party.
I have checked the copy controls for order to billing but the system is still spliting the invoice.
Please share your expertise.

Hello,
Can you please provide the details from the "Split Analysis", when you are trying to combine the 2 documents.
Regards,
Raghavendra

Documents for "vgl.h" and GDB?

I have some interesting foundings when studying the "XXXX.achacks.as" files. It seems that Alchemy v0.5 already has build-in (simple) GL and GDB support.
Some code copied here:
For GL:
Alchemy::NoShell {
public var gvglbmd:BitmapData;
public var gvglbm:Bitmap;
public var gvglpixels:int;
} // Alchemy::NoShell
public function vgl_lock():void
// nop
public function vgl_unlock():void
Alchemy::NoShell {
// blit!
if(gvglbmd && gvglpixels)
    gstate.ds.position = gvglpixels;
    gvglbmd.setPixels(gvglbmd.rect, gstate.ds);
} // Alchemy::NoShell
public function vgl_end(dummy:int):int
Alchemy::NoShell {
var pixels:int = gvglpixels;
gvglpixels = 0;
return pixels;
} // Alchemy::NoShell
return 0;
public var vglKeys:Array = [];
public var vglKeyFirst:Boolean = true;
public var vglKeyUEL:*;
// mode...
// 1: VGL_RAWKEYS
// 2: VGL_CODEKEYS
// 3: VGL_XLATEKEYS
public var vglKeyMode:int;
public function vgl_keyinit(mode:int):int
trace("vgl_keymode: " + mode);
vglKeyMode = mode;
return 0;
public function vgl_keych():int
if(vglKeys.length)
    return vglKeys.shift();
return 0;
public function vgl_init(width:int, height:int, pixels:int):int
Alchemy::NoShell {
var stage:Stage = gsprite.stage;
trace("vgl_init: " + width + " / " + height + " : " + pixels);
if(vglKeyFirst)
    // windows VK_ (keyCode) => scan code
    var vk2scan:Array = [
      0, 0, 0, 70, 0, 0, 0, 0, 14, 15, 0, 0, 76, 28, 0, 0,
      42, 29, 56, 0, 58, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
      57, 73, 81, 79, 71, 75, 72, 77, 80, 0, 0, 0, 84, 82, 83, 99,
      11, 2, 3, 4, 5, 6, 7, 8, 9, 10, 0, 0, 0, 0, 0, 0,
and for GDB:
Alchemy::NoShell
public class GDBMIDebugger
Alchemy::NoDebugger {
public function GDBMIDEbugger(dbge:Debuggee) {}
Alchemy::Debugger {
var sock:Socket;
var debuggee:Debuggee;
public function GDBMIDebugger(dbge:Debuggee)
    sock = new Socket();
    debuggee = dbge;
    sock.addEventListener(flash.events.Event.CONNECT, sockConnect);
    sock.addEventListener(flash.events.ProgressEvent.SOCKET_DATA, sockData);
    sock.addEventListener(flash.events.IOErrorEvent.IO_ERROR, sockError);
    sock.addEventListener(flash.events.SecurityErrorEvent.SECURITY_ERROR,
      sockError);
    debuggee.suspend();
    try
      sock.connect("localhost", 5678);
    catch(e:*)
      sockError(e);
Also, in "alchemy\avm2-libc\include\" folder, you can find a header file "vgl.h", full file copied below:
#ifndef _VGL_H_
#define _VGL_H_
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <machine/cpufunc.h>
typedef unsigned char byte;
typedef struct {
byte     Type;
int      Xsize, Ysize;
int      VXsize, VYsize;
int   Xorigin, Yorigin;
byte     *Bitmap;
int    PixelBytes;
} VGLBitmap;
#define VGLBITMAP_INITIALIZER(t, x, y, bits)    \
    { (t), (x), (y), (x), (y), 0, 0, (bits) }
* Defined Type's
#define MEMBUF        0
#define VIDBUF4        1
#define VIDBUF8        2
#define VIDBUF8X    3
#define VIDBUF8S    4
#define VIDBUF4S    5
#define VIDBUF16    6        /* Direct Color linear buffer */
#define VIDBUF24    7        /* Direct Color linear buffer */
#define VIDBUF32    8        /* Direct Color linear buffer */
#define VIDBUF16S    9        /* Direct Color segmented buffer */
#define VIDBUF24S    10        /* Direct Color segmented buffer */
#define VIDBUF32S    11        /* Direct Color segmented buffer */
#define NOBUF        255
typedef struct VGLText {
byte    Width, Height;
byte    *BitmapArray;
} VGLText;
typedef struct VGLObject {
int          Id;
int          Type;
int          Status;
int          Xpos, Ypos;
int          Xhot, Yhot;
VGLBitmap     *Image;
VGLBitmap     *Mask;
int        (*CallBackFunction)();
} VGLObject;
#define MOUSE_IMG_SIZE        16
#define VGL_MOUSEHIDE        0
#define VGL_MOUSESHOW        1
#define VGL_MOUSEFREEZE        0
#define VGL_MOUSEUNFREEZE    1
#define VGL_DIR_RIGHT        0
#define VGL_DIR_UP        1
#define VGL_DIR_LEFT        2
#define VGL_DIR_DOWN        3
#define VGL_RAWKEYS        1
#define VGL_CODEKEYS        2
#define VGL_XLATEKEYS        3
extern video_adapter_info_t    VGLAdpInfo;
extern video_info_t        VGLModeInfo;
extern VGLBitmap         *VGLDisplay;
extern byte             *VGLBuf;
* Prototypes
/* bitmap.c */
int __VGLBitmapCopy(VGLBitmap *src, int srcx, int srcy, VGLBitmap *dst, int dstx, int dsty, int width, int hight);
int VGLBitmapCopy(VGLBitmap *src, int srcx, int srcy, VGLBitmap *dst, int dstx, int dsty, int width, int hight);
VGLBitmap *VGLBitmapCreate(int type, int xsize, int ysize, byte *bits);
void VGLBitmapDestroy(VGLBitmap *object);
int VGLBitmapAllocateBits(VGLBitmap *object);
/* keyboard.c */
int VGLKeyboardInit(int mode);
void VGLKeyboardEnd(void);
int VGLKeyboardGetCh(void);
/* main.c */
void VGLEnd(void);
int VGLInit(int mode);
void VGLCheckSwitch(void);
int VGLSetVScreenSize(VGLBitmap *object, int VXsize, int VYsize);
int VGLPanScreen(VGLBitmap *object, int x, int y);
int VGLSetSegment(unsigned int offset);
/* mouse.c */
void VGLMousePointerShow(void);
void VGLMousePointerHide(void);
void VGLMouseMode(int mode);
void VGLMouseAction(int dummy);
void VGLMouseSetImage(VGLBitmap *AndMask, VGLBitmap *OrMask);
void VGLMouseSetStdImage(void);
int VGLMouseInit(int mode);
int VGLMouseStatus(int *x, int *y, char *buttons);
int VGLMouseFreeze(int x, int y, int width, int hight, byte color);
void VGLMouseUnFreeze(void);
/* simple.c */
void VGLSetXY(VGLBitmap *object, int x, int y, u_long color);
u_long VGLGetXY(VGLBitmap *object, int x, int y);
void VGLLine(VGLBitmap *object, int x1, int y1, int x2, int y2, u_long color);
void VGLBox(VGLBitmap *object, int x1, int y1, int x2, int y2, u_long color);
void VGLFilledBox(VGLBitmap *object, int x1, int y1, int x2, int y2, u_long color);
void VGLEllipse(VGLBitmap *object, int xc, int yc, int a, int b, u_long color);
void VGLFilledEllipse(VGLBitmap *object, int xc, int yc, int a, int b, u_long color);
void VGLClear(VGLBitmap *object, u_long color);
void VGLRestorePalette(void);
void VGLSavePalette(void);
void VGLSetPalette(byte *red, byte *green, byte *blue);
void VGLSetPaletteIndex(byte color, byte red, byte green, byte blue);
void VGLSetBorder(byte color);
void VGLBlankDisplay(int blank);
/* text.c */
int VGLTextSetFontFile(char *filename);
void VGLBitmapPutChar(VGLBitmap *Object, int x, int y, byte ch, byte fgcol, byte bgcol, int fill, int dir);
void VGLBitmapString(VGLBitmap *Object, int x, int y, char *str, byte fgcol, byte bgcol, int fill, int dir);
#endif /* !_VGL_H_ */
So is there any document for them, or anyone has ever figured out how to use the VGL apis in alchmey?

Hi There,
Please take a look at the following table:
CRM_JCDS - Change Documents for System/User Statuses (Table JEST)
I hope it helps!
Kind Regards,
Gabriel Santana

Can anyone recommend a good document for Cisco IDS and AAA

I need some basic tutorial for Cisco IDS and AAA. can anyone recommend any document for it?
thanks

The Cisco IDS/IPS senors do not perform any AAA functions. You can not validate a user/password externally.

Draft documents for Sales return and Goods return

Morning, Exports,
I got two questions, pls kindly help!
1) The draft documents regually if not with approval process, can be removed from draft list, but once it's with approved process, the "approved" draft document can't be removed. How to have it deleted from the list of draft documents? As there are two many drafts and we need to take them out once its data was adding into system....
2) Where we can see the serial# that picked for the draft document?
Thanks!
Emily

Here are the answers ---
1) The draft documents regually if not with approval process, can be removed from draft list, but once it's with approved process, the "approved" draft document can't be removed. --> TRUE
How to have it deleted from the list of draft documents? --> NOT POSSIBLE FOR DRAFT DOCUMENTS
As there are two many drafts and we need to take them out once its data was adding into system.... --> USE THE "OPEN ONLY" OPTION TO AVOID THE CLOSED / UNNECESSARY DRAFT DOCS.
2) Where we can see the serial# that picked for the draft document? --> GO TO ANY MODULE -> REPORTS -> "Document Drafts Report" --> Document No. [BUT THIS NO. WILL NOT TAKEN IF ANY DOCUMENT IS CREATED AFTER THIS DRAFT OF THE SAME DOCUMENT TYPE. THE FINAL NO. WILL BE THE LAST NO. + 1 OF A PARTICULAR DOCUMENT TYPE]

Documents for service desk and solman diagnostic

Hi All,
Am in the middle of configuring service desk and solution manager diagnostic.
Can anyone send me the documents to configure these please? You can send me the documents at k.imran at gmail.com.
Points will be awarded
Regards,
Imran
Edited by: Imran Khan on Apr 23, 2008 8:04 AM

Hi Imran,
This may sound familiar, but the best place that I keep using and recommending to all is
http://service.sap.com/rkt-solman
You have to supply your S user ID and password.
Once inside, you may select Solution Manager 4.0 and under the relevant headings, you'd find quite a lot of PDF and SAP Tutor files.
Best regards,
Srini

Need document for oem installation and configuaration?

Hi,
In my environment our databases are running linux. i want to configurare all database in oem . please guide me
Thanks,

Without Oracle version it's hard to give specific answer.
Try here
Oracle® Enterprise Manager Advanced Configuration
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/toc.htm

How to specify the security policy "Allow access to everyone" for security role in Deployment descriptor

Hi,
I am migrating a web application from Websphere to Weblogic. The web application has a security role defined in web.xml (Use LDAP for authentication).
security-role>
        <description>Authenticated</description>
        <role-name>Authenticated</role-name>
    </security-role>
This role is mapped to a special subject "All authenticated user in appliation realm" in WAS.
In weblogic, I have the following setting in weblogic.xml
<wls:security-role-assignment>
        <wls:role-name>Authenticated</wls:role-name>
        <wls:externally-defined />
    </wls:security-role-assignment>
And after deploy the application, have to manually add a security role and add the security policy "Allow access to everyone" to this role.
I am wondering if this setting can be specified in for example weblogic.xml so just deploy web applicaiton using deployment descriptor, and I don't need write script to do that .
Thanks

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

Deployment descriptor error for an EJB 3.0 entity bean module

Hi all,
i'm facing an error deploying an EJB 3.0 entity bean module wrapped in an enterprise application on WebLogic 10.
The application is composed as follows:
WASEnterprise.ear
|-META-INF
|-application.xml
|-WAS.jar
|-META-INF
|-persistence.xml
In other words the application server is unable to load persistence.xml deployment descriptor and,during deployment, it throws an error message like this:
<Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\bea\user_projects\domains\base_domain\autodeploy\WASEnterprise\WAS/META-INF/persistence.xml of module WAS. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
I suppose that the persistence.xml is correct since i can deploy the application on jboss without any problem.
The persistence.xml deployment descriptor is:
<?xml version="1.0" encoding="UTF-8"?>
<persistence>
<persistence-unit name="CNT4">
<non-jta-data-source>cnt5ds</non-jta-data-source>
<class>it.eni.italgas.was.db.entity.AsiDisco</class>
<class>it.eni.italgas.was.db.entity.AsiErrori</class>
<class>it.eni.italgas.was.db.entity.WasAsiRouting</class>
<class>it.eni.italgas.was.db.entity.WasAsiRoutingId</class>
<class>it.eni.italgas.was.db.entity.WasAsiSchemas</class>
</persistence-unit>
</persistence>
and the application.xml deployment descriptor is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="5" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd">
<display-name>WASEnterprise</display-name>
<module id="myeclipse.1188512259959">
<ejb>WAS.jar</ejb>
</module>
</application>
I don't use any other weblogic specific deployment descriptor.
Have you ever experienced such a strange behaviour? Can you suggest something to solve the problem?
Thanks inadvance.
Denis Maggiorotto

Hi all,
i'm facing an error deploying an EJB 3.0 entity bean module wrapped in an enterprise application on WebLogic 10.
The application is composed as follows:
WASEnterprise.ear
|-META-INF
|-application.xml
|-WAS.jar
|-META-INF
|-persistence.xml
In other words the application server is unable to load persistence.xml deployment descriptor and,during deployment, it throws an error message like this:
<Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\bea\user_projects\domains\base_domain\autodeploy\WASEnterprise\WAS/META-INF/persistence.xml of module WAS. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
I suppose that the persistence.xml is correct since i can deploy the application on jboss without any problem.
The persistence.xml deployment descriptor is:
<?xml version="1.0" encoding="UTF-8"?>
<persistence>
<persistence-unit name="CNT4">
<non-jta-data-source>cnt5ds</non-jta-data-source>
<class>it.eni.italgas.was.db.entity.AsiDisco</class>
<class>it.eni.italgas.was.db.entity.AsiErrori</class>
<class>it.eni.italgas.was.db.entity.WasAsiRouting</class>
<class>it.eni.italgas.was.db.entity.WasAsiRoutingId</class>
<class>it.eni.italgas.was.db.entity.WasAsiSchemas</class>
</persistence-unit>
</persistence>
and the application.xml deployment descriptor is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="5" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd">
<display-name>WASEnterprise</display-name>
<module id="myeclipse.1188512259959">
<ejb>WAS.jar</ejb>
</module>
</application>
I don't use any other weblogic specific deployment descriptor.
Have you ever experienced such a strange behaviour? Can you suggest something to solve the problem?
Thanks inadvance.
Denis Maggiorotto

Document for deployment descriptor and config

Similar Messages

Maybe you are looking for