Document is alrady contains cleared items-reversal not possible

Hi All,
At the time of MIRO reversal we are getting error massage Document is already contains cleared items-reversal not possible
actually one MIRO document using TDS line item and we make a payment for that TDS line item after that we try to reserve MIRO document that time we are getting error massage.
Please help me to resolve this issue.
Regards,
juhi

Hi Spradip & Minesh,
Thanks
But as per my client they do the same in system but this document only not getting reveres why they don't know.
but what we do because they want to reverse the document.
Please help me
Thanks & Regards,
Juhi

Similar Messages

MR8M-Document already contains cleared items - reversal not possible

Hi Gurus,
I am getting error message Document XXXXX 1000 2014 already contains cleared items - reversal not possible while cancelling IR via Tcode MR8M.
Invoice was already paid twice by mistake hence we are trying to cancel via MR8M.
I know we can do via FBRA by resetting the cleared item but is there any other options or workaround?
Thanks,
Kumar

Hi Jurgen,
Thanks for your reply;
Invoice posted twice and 1 needs to be reversed. Please refer the attached screenshot.
Thanks,

FBRA-Document includes already cleared items - reversal not possible

While reset and reversal using FBRA I am getting the following error. Please do let me know if any clue to resolve this issue.
Document includes already cleared items - reversal not possible
Message no. F5 308
Diagnosis
A reverse posting clears all line items that are managed as open items. This is not possible if one of the items in question has already been cleared by another method.
System Response
Error message.
Procedure
If you really want to reverse the document with the number you specified, display the cleared items and reset all those items for which you can find clearing document numbers. Then repeat the reverse transaction.

Hi Dewang,
Thanks for your quick responce.
step 01- Posted Customer Invoice on 01-Jan-2011with RV doc with Rs-1200: Doc 111111
Step 02- Posted Customer downpayment on 01-Jan-2011 with DZ doc with Rs-1200: Doc No 2222222
Step 03- Clear Customer line items on 10-Jan-2011 with AB doc with Doc no- 3333333
Trying to reverse Cleared Item (i.e. Doc No 3333333) with T-Code FBRA. While doing Reset and reversal we are getting the above problem.
Please let me know if you need any information.
Regards
Raj

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Error :Reversal not possible; last settlement was in period 008 2008

Hi,
One assets was capitalized by wrong settlement from AUC to final assets in last year. But I try to reverse the WBS through cj88 i am receiving the error message like: Reversal not possible; last settlement was in period 008 2008 Message no. KD547 . The wbs status is Dead.
could you please guid me how to rever the wbs incurrent period after re opining the wbs.
With regards
V K

Is it possible to reverse the settlement done to the final asset from AUC?
I am using investment profile with summery settlement not line item one....is it possible in my case?
Kindly let me know...Thanks
RIYA

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

Document in transfer for purchase order - creation not possible

Hi Experts,
we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
any inputs are appreciated
Rg
sam

Hi All,
We have resolved the above problem.
When user does confirmation ,if it sucessfully created then there will be no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
Thanks to all the ppl who has replied
sameer

Cleared items reversal automatically

Hi Experts
This is regarding mass reversal of cleared items that can be done in T.code FBRA
Can anyone tell me how to do mass reversal of cleared items automatically. Is there any BAPI is existing for for automatic reversal of cleared items.
Thanks
Balu

Hi,
As per my understanding, there is nothing possible for mass cleared documents, mostly you can use LSMW if you have documents in mass.
Thanks,
Vasu.

Document Split for Manually Cleared Items

Hi SDN,
Is there a way to inherit the document splitting characteristics for manually cleared items? To give you an example, please see below scenario in General Ledger View
Invoice
Dr Expense                 Cost ctr 10001
Cr Trade Creditors      Cost ctr 10001 (inherited from expense item)
Payment
Dr Trade Creditors       (no cost center assigned)
Cr Outgoing Bank          (no cost center assigned)
Manual Clearing of vendor items via F-04
Dr Trade Creditors        (no cost center assigned)
Cr Trade Creditors        Cost ctr 10001
Dr Zero Balance Clrg    Cost ctr 10001
Cr Zero Balance Clrg    (no cost center assigned)
This scenario happens since the company has instances where payment comes first before the actuall invoice. In this instance, the document split function won't properly reflect the correct cost center assignment.
Is there a way for this to be inherited even for manual clearing (just like the one for bank reconciliation process wherein the cost/profit center assignments are inherited on the clearing items)
Thanks

Hello,
Yes, you can have profit center as a characteristic for splitting and inheritance too. Your scenario will work as below:
Invoice:
Dr Expense 1000 CC1   PC1
Cr A/C Pay   1000          PC1
In above invoice PC1 will be inherited from the expense line in which the user will need to enter the cost center, and profit center will be derived from the Cost Center master.
You make a payment:
Dr Vendor 1000      PC1
Cr Bank      1000    PC1
In above scenario, user needs to give a profit center in bank line manually or it can be automatically derived using FAGL3KEH setting for bank accounts. From bank line the profit center will be inherited to the vendor line.
Finally when you try to clear the vendor items using F-44, following entry will be passed:
Dr Vendor 1000 PC1
Cr Vendor 1000 PC1
Only if the profit center entered during the payment and invoice are separate, zero balance clearing lines will be hit.
Regards,
Sam

Saving of assigned item categories not possible

Hello Guru,
I wanted to create Open Items and Bank Statement Files using program RFEBKATX. When I am executing, I get the error message "Item category 04000 not allowed in accounting transaction 0200 / 0001.
So, I tried to add the entry 04000 in Accounting transaction variant 0001. The problem is, that it`s not possible to save the entry. If I try to do, I get no message that saving was successful and when I leave the table, the entry is not longer available.
Why is it not possible to save the entry?
I tried the same with creating a new Accounting transaction variant. The result was the same.
Best regards
Phillip

Dear Phillip,
The probable reason why you are getting this error is you are combining some cash transactions in the process which you are doing.
SAP would not allow you to change the existing transaction variants.This is a standard behaviour and there is no error. If required, copy the existing variant and create a new variant and include item category 04000( Cash) . Assign the same to your document type.
Strange that you are not able to create a new item category. I understand that system will not allow to create a business transaction, but create a new accounting transaction variant and have all your desired item categories.
Check the below path for customising
General ledger accounting(new)-Document splitting-extended document splitting.
Thanks
Aravind
Edited by: Aravind Aitipamula on Nov 11, 2010 5:16 PM

Document Reversal not possible created using MFHU - REM

Hi Gurus,
We have follwoing PP scenario implemented for our client as a part fo REM-HU Process
1. Handing unit creation using HUP1-Packing of finished product
2. GR of finished Goods (131 Mvt) and GI of compoenent (261 Mvt) using MFHU Transaction
3. Creation of outbound delivery using VLMOVE-303 Movement type- Outbound delivery contained HU - 303 Movement type
4. PGI of outbound delivery
5. Creation of inbound delivery using output type ZSPD
Now if i want to reverse the process i am doing below steps.
1. Deletion of inbound delivery after deleting assignement with inbound delivery as PGR is not yet happened
2. Reversal of Outbound delivery using VL09- 304 movement
3. Deletion of HU assignement and deletion of Outbound delivery
4. Now when i am reversing GR and GI document using HUCANC ----Getting Error
" Goods issue for repetitive mfg. cannot be reversed via handling units "
and
if we cancel using MF41 it is giving error message that
" Document is a handling unit document and cannot be reversed "
Please let me know how to cancel or reverse MFHU doucment i,e GR and GI document
Thanks/BR
Rupesh

hi rupesh ,
please go through below sap note it will help you resolve the issue :
425357 - Transaction MF41: Error VHURM041 for handling unit
regards,
satish

Automatic Clearing (F.13) not possible for two different year GR/IR document

Dear Expats
We are facing one problem.
Through automatic clearing F.13 we are unable to clear the GR and IR document.
GR document posing date in 2013
IR document posting date in 2014
How can we will solve the issue?
Regards
Tarek H Chy

Dear Christian
Thanks for your feedback
As per advice i have remove the year
Clear over the year document.
Regards
Tarek

Asset down payment reverse not possible in AA

Hi all of you,
I have one issue of AA down payment made last year and the payment was made through AAP(Automatic payment methodT-F110) and the period is closed now.
Know the check payment is to reverse but SAP would not make the reversing entre through FCH8 it give error of different financial year posting not allowed, I have tried it through FBRA and FB08 and also asset transaction reversing by T- AB08 also, but it give same error.
Kindly suggest any solution through which I can post reversal enty in current period, with out effecting the previous year.
Thanks

hi
as per my knowled u cant reverse document in he current fiscal year which was posted in the last year it's not sujjestable also
because u already closed all the records related to last fiscal year
Thanks & Regards
phaneendra

Document is alrady contains cleared items-reversal not possible

Similar Messages

Maybe you are looking for