Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Similar Messages

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Document in transfer for purchase order - creation not possible

Hi Experts,
we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
any inputs are appreciated
Rg
sam

Hi All,
We have resolved the above problem.
When user does confirmation ,if it sucessfully created then there will be no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
Thanks to all the ppl who has replied
sameer

Error:-document is in transfer for purchase order..creation is not possible

Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?

Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao

Document is in transfer for purchase order.Creation not possible

Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.

Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ

Mess SR 053 - Creation not possible (Mapping for product already exist..

There is an error ocurring when the CIF is executed, this message I can see in the transaction SMQ1, the error " SR 053 - Creation not possible (Mapping for <product> already exists <product> ", the product really exists in APO but I don't know why this error occur because in this case the material should be updated. Anyone know why this error occur ?? and how can I fix ??
When I try to execute only this material in CFM2 no errors occur.
Regards,
Edson Suzuki

We did faced a similar problem. The reason was the external material number was different in both cases.
ie the already existing record has the external material number padded with '0000' and the one coming doesn't have leading '0000'
If this suggestion helps you, please reward by points..
Shibu

Document is alrady contains cleared items-reversal not possible

Hi All,
At the time of MIRO reversal we are getting error massage Document is already contains cleared items-reversal not possible
actually one MIRO document using TDS line item and we make a payment for that TDS line item after that we try to reserve MIRO document that time we are getting error massage.
Please help me to resolve this issue.
Regards,
juhi

Hi Spradip & Minesh,
Thanks
But as per my client they do the same in system but this document only not getting reveres why they don't know.
but what we do because they want to reverse the document.
Please help me
Thanks & Regards,
Juhi

Account determination for LGCA -INS not possible..?

Hi experts
Here i m getting the error "Account determination for LGCA -INS not possible" while doing GOODS receipt for capital items.
we have done GR earlier for the same capital item, but now recently i m getting this account determibation error .
Can any body giv some idea to trouble shoot the problem.
Thanks
Sap-MM

Hi
ur getting this type of error .. take example as below :
"Account determination for entry IN01 GBB 1000 BSA 7910 not possible"
1 go to transaction OBYC
2 Click on GBB
3 it will ask you for Chart of Accounts.. give input IN01....enter
4It wil show you a list of Valuation /General Modification/Valuation Class/Debit GL account/credit GL account
Maintain Along with the help of MM guy/FI guy/ Nor wrong GL posting will take Place
rgds
BV
Edited by: Brijesh Verma on Dec 14, 2009 4:53 PM

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

Account determination for entry PRD not possible

Hi All,
In exsiting PO line, we did two goods receipt, and we tried to invoice the vendor based on the goods receipt. The wearid thing is only one goods receipt got invoiced, the other gives error message saying: " account determination for entry PRD not possible ".
I checked with finance team, they said we intentionally didn't set up the account for price difference. And if one GR can be invoiced and goes to correct accout, the other one should be able to invoice as well, when I simulate the entry, the vendor account didn't get picked up, I think that's the key of this problem.
why the vendor account didn't get picked up by the system? please advise if you have any thoughts, I appreciated.

Nancy,
This is the restriction with materials managed in moving average price. I'm guessing that the user has performed goods issue between GR and IR on the second material. If you'd like to keep the current config setting, you will need to reverse the GI transaction, post the invoice, and repost the GI.
The above steps should resolve your current issue. However, this may not be the best approach as you will need to keep asking user to reverse their GIs every time the stock quantity is less than invoiced quantity. I would recommend that you talked to FI folks and convince them this is part of standard SAP process. It makes sense because we want to distribute the difference between invoice price and PO price to the existing stock quantity. Without this restriction, the moving average price can be skewed disproportionately.

Update for CC 2014 not possible, i need a quick solution. I also cant import anything

Creative Cloud update is not possible, i also can import only once in AE CC 2014.
I`m on Mac Yosemite 10.10.2 the Cloud Manager also shows he cant finish the Update.

Quit Creative Cloud desktop application .
Step 1:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Step 2:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.
/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Then launch Creative Cloud application and check.
Let me know whether it gives blue update button for After Effects CC 2014 ?

Order book for overseas friends not possible?

I want to create a book which should then get sent to friends which are overseas.
I am living in australia and want to send a book as a gift to europe (gemany) - but it seems to be not possible when i want to pay with my australian credit card. Am i doing something wrong or what is my option?
Thanks for any help...
Tino

It is not possible - it must be shipped to the country you are ordering from and must match your credit card information
http://www.apple.com/au/support/photoservices/shipping/
Do you ship internationally?
Customers with Australian billing addresses can ship photo orders to any address in Australia. Apple Photo Services does not currently offer shipping from Australia to other countries at this time.
LN

Confirmation Creation not possible - Document is in Transfer for PO.

Hi Gurus,
Scenario :Extended classic
Server :SRM_SERVER 550 -SAPKIBKT05
We are not able to create subsiquent Confirmations for a PO, as the entries in table BBP_DOCUMENT_TAB, is not being cleaned by CLEAN_REQREQ_UP, even after the IDOC has been posted successfully in the back end.
the IM ( Conformation) entries are
not being cleaned by the CLEAN_REQREQ_UP batch job which is running succesfully.
I went though the OSS available and there are some old notes which talks of this issue. OSS 171113, 187802..but no soution recommended.
I also came across this note 644963 which talks of a report to delete the IM entries in BBP_DOCUMENT_TAB (Report :ZZ_CLEAN_BBP_DOCUMENT_TAB).
But this report has not be provided by SAP in patch level SRM_SERVER 550 -SAPKIBKT05
Has any one resolved this issue..please help us out.
Please note that deleting the (IM) entry related to this PO from table BBP
DOCUMENTTAB, solves the problem.
Best Regards
Prashanth

Hi Ramakrishna,
Thanks for the responce.
Running CLEAN_REQREQ_UP manually and resetting the job solved the problem.
The report that I mentioned is in a related note of 644963
Best Regards
Prashanth

PDF Document requests a password for opening despite not setting it up to do so

I created a secure pdf document that is to be downloaded from a web site. Upon downloading, users should be able to open/view the pdf without having to enter a password, but would need a password to be able to edit or make changes to the document. When testing the document and downloading from the web site, I am prompted for a password even though I did not set the pdf to request one for opening the document.
Can someone please help me undertand what's going on. I've tried a million things with no luck!
Thanks!

Can you post the file somewhere for us to look at?

LSMW for Asset Creation not creating Transaction

Hi,
I am using standard LSMW for creating Asset into the SAP system and passing transaction code as AS91.
Object: 0160
Method: 0001
Program Name: RAALTD01
Program Type: B
The asset is getting created, but even after passing the Transaction Data (Structure BALTB), with T-Code AS91, it is not creating the transaction record into Asset.
Any solution / work around for this?
Thanks & Regards,
Sandip kamdar

try with recording method, i had done this for same tcode and sucessfully completed the job.

Document is in transfer for PO, creation not possible

Similar Messages

Maybe you are looking for