Document is not capured from material master to PO

Hi Gurus
I created a material in the material master. In the additional data, i have attached the PDF drawing of the material and i have save it.
Say Material Shaft was created.
Then i created Purchase order for the material Shaft. In PO i am not able to get the PDF which i stored in material master.I need to send the drawing along with the PO.
What i have to do ?
- Pithan
Edited by: Pithan Pithan on Feb 5, 2009 5:02 PM

hi Pramod
Thank you for your reply
For material X , i have created a Document in CV01N and released it. in the object link - material master, i have attached the X material.
when i am creating a PO (ME21N), i gave a material 'X'. selecting the PO item and clicking documents icon below that, i didn't find any document, but when i manually enter the document, it is attached..
I need to know, the document is attached to the material master, when creating the PO, it has to pick the document...
I am asking why its not picking it... ?
- Pithan

Similar Messages

Profit Center is not taken from Material Master

Dear all,
When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

>
Jigar Thakkar wrote:
> Hi,
>
> It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
>
> Regards,
> Jigar
Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

VK11 Material Description Does Not Came from Material Master

Hi Gurus,
Good day. Please kindly help advice where does the material description in VK11 came from as it displays a different description not equal to material master.
Thank you in advance.
Regards,
Rellie

Dear Rellie,
It should show the same as mentioned in MM01. Plz check again d MM03 as description for a matieral wil always b picked from Mat. Master only across SAP.
If still ny specific issue then share otherwise plz close d thread.
regards

Automatic Document Attachment in PR from Material Master

I have attached Documents in Material Master with certain Material Codes . We are using DMS for Document attachment . Using MRP run , Purchase Requisitions get generated . My requirement is that these generated PRs must have Document attached automatically as per their attached Documents in Material Master
I will be highly oblised for the suggested solution .
Rgds
B mittal

Hi,
Please check whether the unit of price is same in both material master as well as in the PR.
Regards,
Divya

Flag Unlimited Overdelivery not purpose from material master for po with as

Dear.
I have a material with flag unlimited overdelivery filled in the material master purchasing view.
When I convert a pr to a u201Cnormalu201D purchase order (without account assignment) the system rightly purposed this flag.
When I convert a purchase requisition with project account assignment category (category Q) in the po the system donu2019t set this flag.
Do you know the reason of this behavior ?
Thanks in advance.

Do you reference a contract in case of the project purchases?
then check the contract if different tolerances are setup there.
maybe it is caused by a program bug that is fixed with OSS Note 1644491 - unlimited overdelivery flag is cleared with price change

Print DMS Document from Material master

Hello All,
Can you advice on how to Print the DMS Document as a smartforms from Material master ?

Hi Arvind,
You have mentioned two different terminologies here.
DMS
Material Master
From DMS, you need to download the attachment and the same attachment can be converted using the FM CONVERT_TO_OTF then try displaying the same into your smartform.
I'm not aware of Material Master Document attachment.
Will reply soon with that solution also.
Regards,
-Wahid Hussain.

Shelf life from material master not flowing into purchase order

Hai friend
I have set a shelf life value in material master ( both minimum & Total shelf life).
But while creating purchase order, values are not flowing from material master to purchase order.
The field is empty.
How to configure, please help.
Regards
Rammohan

1.activate batch management
2.to calculate SLED production date/date of goods receipt is mandatory during GRN
3.Maintain characteristic for production date MCH1 - LFWRT
4.assign this to class
5.Maintain this class to material
6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
hope it helps

Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Purchase group in Purchase order from creator not from Material Master

Hi All,
Can you please help me with the next one?
Points rewarded.
In the materialmaster is purchase group 44B entered but
The default purchase group of the buyer is 55C. Is it possible
that the value 55C is automaticaly placed in the PO when
the buyer creates the Purchase order?
At this moment always the default value from Material
master is proposed.
Thank you in advance,
Eric.

Hi,
You have to look at the overall process.
The idea of the Purchasing Group is to indicate which buyer manages that material in that plant.
SO when the system (or a user) generates a requisition for that item at that plant, the system then knows who should convert it etc.
So my question to you would be, "why have you got a default P group in the material master record that is NOT the buyer who manages that item at that plant?"
If several buyers share a list of materials then just use one P group for the "group" of buyers, instead of separate P groups for each buyer.
The system doesn't have the option to automatically overwrite the P group on the requisition because this may be someone just "helping out" the buyer who is busy and so it does not mean that the requisition should be changed to be linked to this other P group.
You already have the field "created by" on the PO and so if you need to report on who created what, then simply use this field instead of P group.
But the P group on the material master (and therefore the requisition) shoudl ALWAYS be the P group that will convert reqs for this item plant combination.
Steve B

Material Description to be overwritten in PR/PO from material master

Hi,
when we create a PO/PR from ME51n and ME21n the material description field is mandatory hence inspite of making setting as display only in SPRO the inital screen will except any description and will save it.
Is there any thing else by which the description data can be overwritten from material master so that even if the user enters any xyz description the system overwrites it from the material master.
Regards,
Reena

Hi,
You can very well achieve it by making the field "Material description" a "Display" field in the IMG path: Maintain screen layout at document level
However, you have to use the right "Field selection key" to make the screen changes. For eg. for NB purchase order, the field selection key would be NBF and not ME21N.
The field selection key that is applicable for the document type can be found in "Define Document types" img activity.
I have checked this and it works perfectly fine for both PR & PO.
Once you enter the material number in PR (or PO), the material description is brought from material master and then the field is greyed out. (thought initially the matl. description field looks editable).
<< Moderator message - Point begging removed >>
Cheers.
Prabhu S
Edited by: Rob Burbank on Nov 24, 2011 10:24 AM

Text linkages from material master to purchase requisition

I already set the text linkage between basic data text in material master with item text in PR. I left fix indicator blank since I want the text to be adopted automatically.
I run MRP and create planned orders. Then I convert planned order to purchase requisition. Material master basic data text is not shown in purchase requisition. I tested using N and * and they both show. With N it shows (reading from material master) and I accnot modify it. With * it shows but I have to adopted to actually store the text as part of this document. With blank is not working. We want the text from material master to be automatically adopted in PR without manual intervention as with *.
Thanks and regards, Jose Oyon.

Hi
If got ur query correctly : you want to make short text field in Preq as Display.
If yes then go to Tcode OLME (or SPRO) -> Purchase requistion->Define Screen layout at doc level->select ME51N--->double click basic data, item and make short text filed as display.
regards
rahul.

How to Remove batch mangement indicator from Material Master

Hi
I am trying to remove batch mangement indicator from Material master..but system does not allow
Before this .. I have done all activities also ...clear open SD documnets ,deliveriy documents ,PO documents ,Process order teco and . reservations and activae deletion flag in batch ... and made current period stock an previous period stock zero... i have cleard all documnets ...still system does not allow remove indicator..could you please guide in this issue ..how to remove batch indicator.
Regards
Sasi

Hi,
Please refer the below links.
Re: untick Batch Manegement Indicator on Material Master
Remove batch management flag and deletion of material documents
How to remove Batch Management in the Material
Re: How to remove Batch Management Check in the Material
Thanks.

Deactivate inspection type from material master

Dears
i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
Now i need to deactivate inspection type from material master
system not allowing to deavtivate as inspection lot was there
how to remove the insepction qty form system
Any tips
Faisal

Hi Faisal,
Hi Faisal,
Try this way,,,
Run QA08
Enter the Plant, Material Code
Then go for the Fourth tab "Mass Processing"
Activate the check box for Activate Despite Inspection Stock and Create Change Documents
Then insert the inspection type.
Execute
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
Select the Line item and Save.
Pls let me know if doesn't work.
Regards,
Shyamal
Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

PO text from material master

I understand text maintained in material master appears in PO under that item. In some purchase order I don't want to print that text. Also I don't want to remove that from material master since I want to use that for other purchase orders.
Can I delete or remove that PO text from purchase order without changing material master ?

Hi,
This you can control through copy control function.
In SPRO > Materials Management > Purchasing > Purchase Orders > Texts for purchase orders > Define copying rule from item texts, there select material PO text and give the value for fix field as required.
Based on the fixed indicator, the below mentioned controls can have.
The text can be fixed (indicator "")*
A text with the status "*" is then displayed in the document and can be adopted in the document if:
You change the text and save the document
You select the text and adopt it (Item -> Texts -> Adopt text)
Until you adopt the text, changes in the master record will also be adopted in the text.
The text is fixed (indicator " ")
The text is copied into the document. Changes to the document text do not have any effect on the original text and changes to the original text have no effect on the document text.
The text is not fixed (indicator "N")
The text is only displayed in the document (i.e. it cannot be changed or printed).
Regards,
Prabu

PO for Material not exixting in material master

Hi all,
I am creating a po for a material that is not exixting in material master.
I have taken document type NB, Given vendor no, Entered Material No, acc assigment as "X All Aux.acct.assgts".
Material Description, Quantity, Price, Currency, Plant, Material Group, GL Account. and saved the PO.
I done GR and When i am Saving system is Shooting an error "Account Determination for Entry 1200 WRX not possible"
Is the procedure done by me is Correct What is the acc assigment key to be taken.
Is it necessary to maintain a Material Group for this type of Material?
Any settings to be done in transaction event key?
Need to define any Vacluation class for this type of materials?
Regards,

Dear,
This type of error is display at that time when you valuation class is not map with any G/L in OBYC for particullar transaction key.
So go in bellow direction.
Enter T-code OBYC.
Select WRX Transaction Key, Double click on it.
Enter your chart of accout.
Enter your valution class which is display in your error - 1200 than enter your G/L.
Than click on save button.
If it is useful for u, Please revert back.
Regards,
Mahesh Wagh

Document is not capured from material master to PO

Similar Messages

Maybe you are looking for