Document journal S_ALR_87012287  Partita IVA

Hi,
In the document journal for Italy, the description Partita IVA should be replaced by CF/PIVA.
old:Partita IVA: 00274730167
new: CF/PIVA: 00274730167
Can you please advise how this can be done?
Thank you.
Kind regards,
Linda

Hi,
I have updated the description in table TTDTG.
I replaced Partita IVA by IC/PIVA.
When I try to run report S_ALR_87012287 again, nothing has changed.
Do you know how I can activate that change?
Thank you.
Kind regards,
Linda

Similar Messages

  • Document Journal s_alr_87012287 -   System date

    Hi,
    A company was late to deliver the Document Journal.
    Is it possible to leave out the system date on the Document Journal?
    Thank you for your feedback.
    Kind regards,
    Linda

    Hello,
    In S_ALR_87012287 selection parameters give the document number or the periods.
    Click on Line Item pages only radio button. This will give the line item details.
    Execute.
    You can press Ctrl+P (Printing Short Cut)
    Give your local printer name.
    print.
    Alternatively,
    Go to FB12
    Give the company code.
    Give the correspondence type (preferably SAP09)
    Give the document number
    and Year.
    Then go to F.61
    Give correspondence type
    Company code.
    Execute
    In case if it is asking, give the device name (your local printer). It triggers a spool request.
    Now go to SP02. You can see your own spool requests.
    Double click on page icon.
    Click on print button.
    Hope this solves your problem.
    Regards,
    Ravi

  • Document Journal for Italy (S_ALR_87012287)?

    Hi,
    How can I find the form which is used in program RFBELJ10_NACC?
    It concerns transaction S_ALR_87012287(the document journal for Italy).
    Thank you.
    Kind regards,
    Linda

    Hi Linda,
    Use SE38 to display RFBELJ10_NACC program. Click Find push button in the application tool bar.
    Give Form in the Find Field and press enter.
    You can find all the forms used in the program.
    Double click on special_document which is on line 987, system takes you to that particular peform.
    If you again double click on special_document, you can view the code in the form.
    Hope this helps...
    Regards,
    Praisty

  • Alternative report to the Document Journal report(S_ALR_87012287)

    Dear friends,
    Please let me know if there is any other alternative report which can be used in place of S_ALR_87012287(Document Journal) report.
    Tks & Rgds,
    Kunal Vichare

    Hi,
    The requirement is to check the list of document journals which are posted during the month.
    We should be able to view the username field as well.
    Hope this clarifies your question.
    Tks & Rgds,
    Kunal Vichare

  • Document journal (accessible)

    Hi gurus!
    I am trying to run the report of  document journal (accessible) for a certain period of time (tx S_ALR_87012287 ). But the system says that this is not  possible because the balance account carry forward has not been done yet. I have already done it but the system keeps saying that is only possible to run the report for the whole fiscal year instead of  the period of time that i inform in the first screen.
    Does anybody knows how to fix it?
    kind regards

    Hi,
    I have updated the description in table TTDTG.
    I replaced Partita IVA by IC/PIVA.
    When I try to run report S_ALR_87012287 again, nothing has changed.
    Do you know how I can activate that change?
    Thank you.
    Kind regards,
    Linda

  • Document journal in group currency

    Executing the standard report S_ALR_87012287 - Document Journal - we realized the output shows the amounts in Local Currency only, but we need to display the amounts in Group Currency as well.
    Is it possible ? can you help me.
    Thanks.
    Elena

    Not likely - Dcoument Journel is run at Company Code level, i.e. local currency.

  • Business Area Filter in Document Journal

    Dear All,
    S_ALR_87012294- Compact Document Journal
    The above report can be processed for a particular User/ Document type etc , the client requires above report for a particular business area . How to resolve the issue, useful answers will be rewarded with points.
    Regards
    Milind Nair

    Hi,
    U can get the report as required by your claint, use the S_ALR_87012287-  Document Journal, form this report u can select the document type/user/business area from dynamic selection or u can create the layout as required by claint from this report, and put it as default, so ever time when ever execute the report no need to select from dynamic selection.
    please assign points if its usefull.
    Regards
    sai krishna

  • Document Journal

    Hi FI Gurus,
    I would like to change the report description that I can see in the output.
    How can I change "Document Journal" in a different description?
    Thanks a lot in advance.
    Best regards.
    Antonio.

    Hi
    What  Transaction code you are using  for display of Document Journal?
    Regards
    Odaiah Pelley

  • Journaled encrypteded partition on Windows

    Hi,
    Is it possible to mount and read and write data to journaled encrypted partition under Windows?

    I used DB2 control center to add database partition, however the following error showed up:
    SQL1042C  An unexpected system error occurred.
    Explanation:
    A system error occurred. Some possible reasons for this error are:
    The database manager is not installed correctly or the environment is
       not set up correctly.
    On UNIX-based systems, db2iupdt may need to be run in order to update
       the DB2 instance to enable acquisition of a new system configuration
       or access to function associated with the installation or removal of
       certain product options, FixPaks, or modification levels.
    The command cannot be processed.
    User response:
    To update the instance to acquire a configuration or access to
       function run DB2IUPDT <InstName>.
    If the error occurred while trying to connect to a database, get a
       trace (instructions below) and call IBM support.
    If the problem falls outside of the above suggestions, ensure that the
    system time and date is correctly set, and make sure your system has
    enough memory and swapping/paging space available.
    Resubmit the current command.
    If the error continues, stop the database manager and restart it.
    If the error still continues, reinstall the database manager.
    If trace was active, invoke the Independent Trace Facility at the
    operating system command prompt. Contact your technical service
    representative with the following information:
    Required information:
    Problem description
    SQLCODE or message number
    SQLCA contents if possible
    Trace file if possible.
    Federated system users: if necessary isolate the problem to the data
    source rejecting the request (see the Troubleshooting Guide for
    procedures to follow to identify the failing data source). If the
    problem is with a data source follow the problem determination
    procedures for that data source.
    sqlcode: -1042
    sqlstate: 58004
    Please advice.
    Thanks and Regards,
    Rudi

  • VAT number - Partita IVA

    Goodmornig,
    i'm trying to buy Lightroom 4, but every time i add my VAT number it chagens and at the begin appears IT and then my VAT number, why? does it invalidate the invoice?
    Buongiorno,
    sto cercando di comprare Lightroom 4, ma ogni volta che inserisco la mia partita IVA, questa viene modificata, all'inizio compare IT e poi la partita IVA. Perchè? Potrebbe compromettere la fattura?

    IT is the vat country code for Italy. All vat numbers should have there country code in front of them but alot of people ignore them, it is only really comes in he you are dealing with other countries.
    In the UK there is a GB in front of the vat number.
    Look up "VAT identification number" in wiki
    I only know about it after a tax inspector pointed it out on a inspection at work.

  • Financials Reports Accounting Document Journal

    There is a field on the 'expanded' button called 'Detail Contains'.  For the report 'General Ledger', this field works fine.  For the report 'Document Journal', it does not work at all.  Has anyone else seen this, and is there a fix anywhere?  We've tried this on 2005A, 2007A and 8.8 with the same results.  
    Thanks for the help,
    Marilyn

    Hi,
    Gordon - manual JE's are included in the Document Journal report. I ran the report and see JE transactions.
    Marilyn - if you have 'JE' selected in the Expanded section, then only manual JE's will be searched on (see the 'Origin' field in Journal Entry - this is what the filter is applied to). If you want to search on all transactions, you need to leave all transactions deselected or if you know the source transaction(s), select only those.
    I tried it out and did get different results. I think the selection in Expanded is the difference.
    If I don't have anything selected, I get the same results in both reports.
    If I have something in Expanded (ex. "contains" filter), the Document Journal report has no results; GL report has entries but they are JE and inventory transactions. In some respect Gordon may be right - only document type transactions will be listed in Document Journal but that doesn't explain why it includes other transactions if nothing is selected in Expanded.
    If that is supposed to be the difference in the two reports (one is for marketing/document transactions only), then there may be a bug.
    Heather

  • Document Jounal & Compact Document Journal

    Dear all,
    Can you tell me what is the difference between Document Journal and Compact Document Journal ?
    Thank you very much,
    Sylvecat

    Hi,
    Compact Document journal - Report will be displayed based on header, Subledger accounts , Taxes, GL accounts for each document. (Tcode: S_ALR_87012289)
    Document Journal - Displays the typical journal with debit /credit entries (either based on GL account numbers provided or for all documents generated) Tcode: S_ALR_87012286
    Example: Take the journal Entry-
    Purchase (debit) 1000
    To Vendor A (Credit) 1000
    In compact Journal, it will look as -
    Document Header: <Company Code> <Doc Number> <Doc Type> & <Posting Date>
    Subledger Accounts: <Account type>: K; <Account number>: Here for vendor A; Amount
    G/L Accounts: <Posting Key>: Here 40 , <GL account>: Here for purchase GL acct number; <Amount>
    In Document Journal -
    All the above details will be present (but with no bifercation between hearder /subledger or GL)
    Regards,
    Sridevi
    <i><b>* Pls. assign points, if useful</b></i>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/sridevi+pattabiraman">me!</a>
    Message was edited by:
            Sridevi

  • Document Journal- T Code FPS_RFKKBELJ00

    Hi experts
    what is use  of Document journal( T code- FPS_RFKKBELJ00) in FICA.
    Regards
    Srinivas

    Hello, Here is the information you require....I have attached it ...
    Hope this is helpful
    Regards
    OLivia
    Edited by: Olivia Walsh on May 24, 2010 11:11 AM

  • Document journal for Turkey

    Hi experts,
    our Turkish company ask needs to execute the document journal with the second currency and with more information like requested by turkish law, this means they have to execute before the Document journal with RFBELJ10 program and then other document journal with the informations requested.
    A Turkish consulting told them in SAP there is a report standard for Turkey, is it right? Please, could you suggest a solution?
    Thanks a lot.
    Regards,
    Gaetano

    Hi,
    The suggested function group IDTR is a SAP provided object and so the process to add your own function module to the group is not straight forward.  You would need to create a function module name in the SAP name range and possibly enter a repair key for the function group.
    It would help if you were more specific about what messages were be displayed when you try to save the function module.
    Regards,
    Nick
    P.S. This is not a form printing question, and so is in the wrong forum

  • Document Journal Printing

    Hi, The users want to print the Document journal from the system. How could we print the standard Journal Documents from the system and also can the range of documents be printed?
    At present we are using the T Code FB12, to request for the correspondence and then we go to T Code F.64 to print. We are using the Correspondence type SAP09 but are not able to print the document as we get the error message "variant SAP09 does not exist".
    Your help would be highly appreciated.
    Thanks in advance.

    Dear Rajjulu,
    Try this
    Easy Access - Information system - Finanical Accounting - general ledger accounting - document -
    her u can find lot of reports for Printing Journals
    Regards

Maybe you are looking for