Document list

Hi Guru's
i am an mm consultant.I need some details regarding the report.In FB03 we get list of documents and if we double click the document we get the value which will not appear in print out  but my Clint requirement is that he needs the value with respect to the document in the prints there is any stranded T CODE where i can get this two details include in the report.
Thanks & Regards

Hi,
Please, specify what 'value' would you like to see... Anyway, you can modify the layout of the FBL3N by standard ALV modification adding the required fields to the output.
Regards,
Eli

Similar Messages

  • CDESK: How to get a customized content in the document list tab

    I try to get a specific list of document info records (DIR's) in the document list tab of the CDESK - similar to the document search result.
    I use the Addin-BADI and the ~PROCESS_NEW_FUNCTIONS/~ADD_NEW_FUNCTIONS methods to start a costumer specific selection of DIR's.
    For instance I want to select all documents with contain the digits 99.
    Then I want to show the selection result as the content of the document list tab to proceed with further steps like ckeck-out and so on.
    I followed an example which I found in this forum, see thread "CDESK: Start userdefined search program and recieve DIRs".
    My coding is:
    method if_ex_cdesk_tbm_addin~process_new_functions.
        when 'ZFCODE_ARBVOR'.
          data lt_draw type table of draw.
          select * from draw into table lt_draw
            where dokar = 'TKD'
              and doknr = '99'.
          sort lt_draw stable by dokar doknr doktl dokvr ascending.
          delete adjacent duplicates from lt_draw comparing dokar doknr doktl dokvr.
          PERFORM refresh_sap_list IN PROGRAM saplcdesk TABLES lt_draw USING 'X'.
    But nothing happens with the document list when executing this customer function.
    I assume it is not possible to update the document list out of a BADI in that way.
    Does anyone has some hints?
    Kind regards,
    Matthias Fischer

    Hi Khaled,
    There is an standard RFC RFC_READ_TABLE which can read any table in R/3. But the data returned will be unformatted hence you need to parse it. This FM has few limitations aswell.
    RFC_READ_TABLE is an RFC that allows users to read a table remotely. This is important particularly to Java developers using JCO to communicate with an ABAP back-end. Unfortunately, RFC_READ_TABLE has size limitations; it also incorrectly reads binary data. Also no authorization checking takes place.
    Also refer the link below
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/portal-content/simplified queries of sap tables from java
    hope this helps..
    Regards
    Anand
    Message was edited by: Anand Torgal

  • Any way to HIDE the Pages "Backup" filenames in iCloud document listing?

    The "Backup" files are annoying to see in iCloud.
    Any way to HIDE the Pages "Backup" filenames in the iCloud document listing at the Open dialog?

    No, there isn't what you are looking for. Maybe someone else have a work around.
    Download the Pages User Guide by going to the Help menu in Pages. there you see what you can do.

  • WBS element in Material Document List Report

    Hi Guru,
         I have a problem about WBS element which is not show up any data in Material Document List (MB51) movement type 281 and 281 Q event I add WBS in the document.  Anyone know how can i config or do anything to let the system show up, please let me know.
         Thanks in advance.

    Hi,
    Go to SPRO > MM > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here for Program Name "RM07DOCS", Table "MSEG" add field "MAT_PSPNR" (Valuated Sales Order Stock WBS Element) and activate "Output" indicator.
    And Then check in MB51

  • I am having an issue where whenever I am at the document list and do edit, to copy or delete a document the iPad locks up. Happens for both pages and numbers. Also happens on my iPhone, but only once in a while. Help.

    I am having an issue with both Pages and Numbers on my iPad. Whenever I am at the document list page and use "edit" to make a copy of a document or delete it, the iPad locks up. Happens almost every time. Also happens on my iPhone but only once in a while. Thought of completely redoing the iPad, but if it happens on the phone as well, won't help. ???

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I don't have pdf documents listed as a file type in the applications drop down menu so I cannot manage the handling of these file types. How do I get the pdf file recognised?

    I don't have pdf documents listed as a file type in the drop down applications menu, so cannot handle these. How do I add a file type?

    After a little Googling, it looks like B.Media is a content management system from Wave Corporation used for making catalogs. Doubtful you'd be able to license it at less than an enterprise level.

  • Invoice document is not appearing in follow-on document list

    Dear All,
    I am customizing Classic scenario for my client. In our process, Shopping cart only created in SRM 5.0 system where as all  follow-on document - PR/PO/GR/IV will be created on back-end SAP ECC 6.0 system.
    My Issue:
    1. Shopping cart appears in requested 'Check Status' list till the time PR, PO and GR created in back-end ECC system. 
        SC disappear in the requester 'Check status' list the moment invoice entered in back-end ECC system. Do the problem
        is due to authorization issue ?
    2. Other user who has SRM-Administrator authorization can view all such shopping cart in 'Monitor shopping cart' option.
        All follow-on document such as PR, PO and confirmation are appearing in Status check option both in graphics as well
       as table form. However invoice document is not appearing in the follow on document list. Do I need to enable any
       customization setting  so that back-end invoice will appear in follow-on document list ?
    << Moderator message - Please do not offer points >>
    Thanks in advance.
    Regds,
    Jennifer
       I don't find any
    Edited by: Jennifer Batty on Nov 30, 2010 3:50 PM
    Edited by: Rob Burbank on Dec 1, 2010 4:16 PM

    Dear All,
    Can some one help me on the below issue.
    Thanks,
    Jennifer

  • Additional field in material document list

    Dear Expert,
    In the T.code MB51 ( material document list)  in the ITEM DATA i need to add origin group field , is it possible ?
    kindly help the above issue,,
    Regards
    Akshaya

    Hi,
    Yes its possible..............
    procedure is to use the below tocde
    Transaction variant SHD0 is the transaction code.
    Using this tocde you can make a particular field as mandatory and hide the filed, gray the filed...
    Thanks
    Ramakrishna Pathi

  • Unable to open excel file in document list

    I have an excel workbook that reads from several SharePoint lists. I have a group of users (5 to be exact) that are unable to open the excel file when its in the document list, however, when I email them the workbook they can open it and update the pivot
    tables on it (that read from several lists). They were able to open the file in the past and this issue started around 6/20 when office updates were pushed out.
    When they open it they get the following error message:
    Excel Web Access please contact your admin.
    The document list has 20 excel workbooks in it and they can open the other 19 without any issues and 5 of them including the one they can't open connect to the same lists for data.  I even created a test doc library and added the file into it and they
    got the same error message.
    What could be causing this?
    note: we not using excel web services, just uploading workbooks where some connect to lists for data

    Hello,
    Are you opening file in browser? if so please try to open in client by changing the library settings-->advanced settings-->then set client.
    Another thing, what permission are given to both users. Try to provide some higher permission and see the result.
    http://sharepoint.stackexchange.com/questions/37785/excel-web-access-not-disabled
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Invoice document not appearing in follow-on document list

    Dear All,
    I am customizing Classic scenario for my client. In our process, Shopping cart only created in SRM 5.0 system where as all follow-on document - PR/PO/GR/IV will be created on back-end SAP ECC 6.0 system.
    My Issue:
    1. Shopping cart appears in requested 'Check Status' list till the time PR, PO and GR created in back-end ECC system.
    SC disappear in the requester 'Check status' list the moment invoice entered in back-end ECC system. Do the problem
    is due to authorization issue ?
    2. Other user who has SRM-Administrator authorization can view all such shopping cart in 'Monitor shopping cart' option.
    All follow-on document such as PR, PO and confirmation are appearing in Status check option both in graphics as well
    as table form. However invoice document is not appearing in the follow on document list. Do I need to enable any
    customization setting so that back-end invoice will appear in follow-on document list ?
    << Moderator message - Please do not offer points >>
    Thanks in advance.
    Regds,
    Jennifer
    Edited by: Rob Burbank on Dec 1, 2010 4:10 PM

    My problem got resolved.

  • Document not visible in Original document list

    Hi
    I want to add document to SAP DMS, found BAPI_DOCUMENT_CREATE2 on net.
    I found a sample program on a thread but when I am executing this I get the newly created document in CV03N but I dont find the document in Original document list.
    FUNCTION Z_DMS_CREATE_DOCUMENT_01.
      DATA: ls_doc LIKE bapi_doc_draw2,
        ls_return LIKE bapiret2.
      DATA: lf_doctype LIKE BAPI_DOC_AUX-DOCTYPE,
            lf_docnumber LIKE BAPI_DOC_AUX-DOCNUMBER,
            lf_docpart LIKE BAPI_DOC_AUX-DOCPART,
            lf_docversion LIKE BAPI_DOC_AUX-DOCVERSION.
      DATA: lt_files LIKE bapi_doc_files2 OCCURS 0 WITH HEADER LINE,
            lt_drat LIKE bapi_doc_drat OCCURS 0 WITH HEADER LINE,
            lt_drad LIKE bapi_doc_drad OCCURS 0 WITH HEADER LINE.
        ls_doc-documenttype = 'DRW'.
        ls_doc-documentversion = '00'.
        ls_doc-documentpart = '000'.
        ls_doc-description = 'New doc 23 July'.
        ls_doc-username = 'TestUser1'.
        REFRESH lt_files.
        CLEAR lt_files.
        lt_files-docfile = 'E:\temp\Sample.pdf'.
        lt_files-wsapplication = 'PDF'.
        APPEND lt_files.
        CLEAR lt_drat.
        REFRESH lt_drat.
        lt_drat-language = 'EN'.
        lt_drat-description = 'Data01'.
        APPEND lt_drat.
        lt_drat-language = 'EN'.
        lt_drat-description = 'Data02'.
        APPEND lt_drat.
        CLEAR lt_drad.
        REFRESH lt_drad.
        lt_drad-objecttype = 'MARA'.
        lt_drad-objectkey = 'A006'.
        APPEND lt_drad.
        CALL FUNCTION 'BAPI_DOCUMENT_CREATE2' EXPORTING:
              documentdata = ls_doc
          IMPORTING:
              documenttype = lf_doctype
              documentnumber = lf_docnumber
              documentpart = lf_docpart
              documentversion = lf_docversion
              return = ls_return
          TABLES:
              documentdescriptions = lt_drat
              objectlinks = lt_drad
              documentfiles = lt_files.
        IF ls_return-type CA 'EA'.
            ROLLBACK WORK.
            MESSAGE ID '26' TYPE 'I' NUMBER '000' WITH ls_return-message.
        ELSE.
            COMMIT WORK.
        ENDIF.
    ENDFUNCTION.
    Can anybody help.
    Thanks in advance
    Ruhi Hira

    Hi,
    based on the sample coding I think that some more data needs to be passed in parameter lt_files. I would recommend you to see the BAPI description in transaction BAPI for the DOCUMENT_CREATE2 BAPI and made sure that the necessary data for
    BAPI table DOCUMENTFILES are also handed over correctly.
    Best regards,
    Christoph

  • DPT-S1 Feature Add Request: File Size (bytes) Sorting and Display in Documents Lists

    Document Lists view should include option to sort by and display file Size (bytes), as in all other file tools.
    That would permit discovery of duplicate files with different names, and trimming out the largest files to save space.
    Thanks!

    Anyone reading this? Agreeing with me?

  • Is it possible to have only one line per item in InfoView document list?

    Hi,
    my customer is complaining about InfoView (Document list) wasting too much screen estate. For each list item (report, folder etc.) InfoView displays two lines, one for the name and one for the description. Is it possible to configure InfoView to display one line only, leaving out the description?
    Regards
    Joern

    Hi Joern,
    You can set the user preferences  to not display the description in the section: Document List Display
    Regards,
    Julian

  • XI 3.1 - Trying to bypass first Infoview screen to Document List

    Hi Everyone,
    I have downloaded the files from "How to set preferences for all users at once in BO XI R2" under samples. Now, I'm not sure how I should deploy and configure. We are on XI3.1 and use Infoview (Java) to run Webi and Crystal reports. We are wanting to bypass the first Infoview screen and go directly to the Document List screen. Also we have configured for SSO AD. 
    Any help would be greatly appreciated.
    Thanks,
    Mike

    For BOE 3.x just follow the steps that are shown in the following forum topic:
    http://www.forumtopics.com/busobj/viewtopic.php?t=75331
    You have to download a script, log in as administrator, configure the settings for the administrator user (the settings you want for all the users, like the start page), run the script and that's all.
    You have to be logged in in the forum in order to download the script.

  • Extend search in cad-desktop view document list

    Hi,
    is it possible to extend the search in the cad desktop's view DOCUMENT LIST?
    when i click the button SEARCH i get to some kind of CV04N-Search. Is it possible to implement a new Tab? i want to search by a change service order and select all documents which are attached to the order's materials.
    thanks
    Sven

    is there no chance to do this?
    another approach would be to insert a new "search"-button to the menu in this view. but i found no way to clear the document list and insert new lines.
    any help would be nice.
    thanks
    Sven

  • MB51 Material Document List Unit of Measure

    Can/How is this list displayed with the unit of measure converted to one unit?
    Example Material movements for liquid with units in gallons and pounds.
    Want to list all in pounds.
    Conversion is entered in material unit of measure tables.

    you can see this in MMBE but not MB51 because this is the material document list and which will shows the Gr unit ( you can display the base unit but not conversion)
    convesion can only be displayed in MMBE

Maybe you are looking for