Document log display
Dear PP gurus,
Is there any t-code which can show Document log discription. (In Rem Scernarial) I got the document log numbers from MF12. But what is it's meaning I can't understand.
Waiting for your valuable help
Thanks in advance
Thanks
Dhananjay
Hi Dhananjay
Regarding document log details; u can check the details in table BLPK
Hope it will meet ur requirements
Rgds
Edited by: Vicky Khabrani on Jan 31, 2008 10:57 AM
Similar Messages
-
DMS Web Documents: cant display status log
Hi experts,
I have a problem in web documents.
When I config Setup WebDocuments(BSP), I chose Display Status Log, Display version, Display Hierarchy, Send, Delete, Create New Version.
But in web page, I cant see Display Status Log, Display version, Display Hierarchy while Send , Delete, New Version is display when I display 1 document number.
What must I do?
Please help me !!!Hi Christoph,
Thanks for help me to solve the problem.
But I have 1 problem abt display too.
That is with create thumbnail document , we can find thumbnail doc by seeing its image. But in web doc, we cant find any doc which has thumbnail image . -
How can I control the application log display format?
Hello all,
I am running into a problem with regard to application log display, and I don't know if we can work on the standard log profile(BAL_S_PROF) to fulfill my requirement, I would like to get you advises.
Basically, we already saved numbers of the messages for each level (Domain BALLEVEL), so at last we will get a log tree with branches hopefully. Like below:
Level 1: Check document item 01 (traffic light is Red)
Level 2: Display success status (Traffic light is Red)
Level 3: Display method B( Traffic light is Red)
Level 4: Display processing status for method B( Traffic light is Red)
Level 3: Display method C ( traffic light is Green)
Level 4: Display processing status for method C ( traffic light is Green)
At present system determine the traffic light color of the upper level depending on the lower level status, if there is even one red light in the lower level, the upper one would be red, like in level 2. My requirement is that we need to make level 2 as GREEN, this way it is more reasonable from the business point of view because a solution has been found. I did some research for the function module 'BAL_DSP_PROFILE_DETLEVEL_GET', but obviously I haven't found a way till now, can anyone shed some light on this?
Thanks,
DerekHello Gaurav,
Thank You..!!! I tried appling filterFunction on the ADG and got whatever I expected but filter changes the original dataprovider behaviour. SO which I dont want to do it.
I have created a local variable and binded whatever data wanted to display on that page. Infact it works as expexted and I still have original data provider as well.
I have one more problem, I'm using creationComplete to initialize my local data provider value. It works only once while creation of state. If I navigate my screens fore and back and come back to this screen, it doesn't display the modified values as creationComplete loads only while state creation.
Is there any mothid which does the samething while vising the page every time than creation?
Thanks,
Siva -
Creating a Folder Within Form or Document Library & Display the name not in the name column.
I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
the Form Library. I want to change that to another column like documents or suchlike.
Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
Thank You,
ChiranthakaHi,
If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
this column with the name of folder.
Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
I have seen a similar post from you in the link below:
http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
Best regards
Patrick Liang
TechNet Community Support -
Change document log not created for customer in Batch input/BDC
Hi Guys,
Change document log is created when you manually change the customer using XD02 but when run the Batch/BDC the values are Changed but the change document is not created.
Please someone can give me some hints?
Luca.Any update guys????
Regards,
guru singh -
Document types displayed as folders when arranged by set to type
Hello everyone,
I have an issue with the finder since upgraded to Lion.
I use to open finder in column view with "Arranged by" set to "Type" and "Sort by" set to name. But the thing is that the titles/names of the document types are sometimes diplayed or behave as ordinary folders.
Look at the snapshot below (sorry it's a french one): in the left column, display is fine. But in the middle one, "Dossiers", "Contacts", "Documents PDF" and "Documents" are displayed as ordinary folders.
Note that the issue does not limit to the display. These non existing folders can be selected with my mouse.
Moreover, it happens randomly and I checked on a new Account: issue is still there.
So, as anyone observed that ?
Thanks a lot,
Nicolas.Sorry for the late reply, but yes this happens to me quite often.
I have no solution to the problem, but it is rather annoying. Especially if you navigate from one column to another. The first file or folder does not get selected instead it is the "headline with the folder icon" that gets selected. Irritating and it looks terrible when highlighted. -
PDF Documents suddenly display as black only
Earlier this year I suddenly had numerous PDF documents start displaying completely black, making it impossible to read the text. Sometimes images appear as ghosted white outlines, but most commonly the whole document is simply a black blob. I can open the same file using a free PDF Reader, but the moment I try opening it in Adobe Acrobat Reader Pro it appears in black again. I've tried uninstalling and reinstalling version 9.2, and have now updated to 9.5, but am still getting the same error.
I have no idea of where else to look to find a solution. Any guidance would be greatly appreciated.
Regards
JurgenThis sounds sort of like a display problem. Are the preferences that you have set under Edit > Preferences > Page Display category in the Rendering area any different in Reader than they are in Acrobat Pro? Also in the same Preference category make sure you have Use Overprint Preview set to Never.
Also you can try checking under the Edit > Preferences > Accessibility category to make sure some of these setting haven't been inadvertently set.
Message was edited by: LoriAUC -
CSD 8.01(a) - Agent ACD State Log Display does not show loing time
Hello,
I have a customer that has was upgraded to CAD 8.0 and now the Agent ACD Sate Log Display does not alway show the login time for agents. We moved them to 8.01(a) for other issues but this one remains. Any ideas?
JeffTahir -- These questions are best asked on the general application server forum. They can answer questions related to Oracle9iAS in general, like questions on Enterprise Manager. It is located at:
http://forums.oracle.com/forums/forum.jsp?id=466592
Thanks -- Jeff -
ACD Logs Display and Agent Call Display is N/A on CSD
Hello,
We are facing the problem that the ACD logs display and Agent call display is N/A on the Cisco Supervisor Desktop. The version of CSD is 8.5.4, overall status of CSD is fine, for reference please see the attached screenshot.Thanks.
Looking forward for the response.
BR,
DurrazeHi Karthi,
On PGA run the postinstall.exe setup turn off/on the Rascal Replication setup, in services.msc cycle the services shared below:
Cisco Chat Service
Cisco Enterprise Service
Cisco LDAP monitor service
Cisco License and Resource management
Cisco Recording and Playback
Cisco Recording and Statistics Service
Cisco Sync Service
Cisco VOIP monitor
Please rate if it helps.
BR,
Durraze Khan -
Hello Experts,
Currently we are in SRM 7.02 implementation, for this we got requirement like below.
In Requestor POWL, Shopping cart related/follow on documents should display as columns in POWL. Please suggest me on this, how can i achieve this requirement. Thanks in advance.
1. we have Related/Follow on documents as shown in below screenshot.
2. As shown in above screenshot, these related/follow-on documents should show as columns in requestor POWL, as shown in below screenshot.
Thanks & Regards
Sivaram.Hi Siva,
Take a look at the last part of the following document.
http://scn.sap.com/docs/DOC-25692
Regards,
Lisandro -
Automatic Posting Document not display
Hi Experts,
We assign automatic posting document for IUE,
When executing IUE it shows Document, again we are going to check the document it displays the below message:
ERROR : Document header char. Movement Type has an ambiguous value in template document.
I checked in SDN Message No: 7561022 and also OSS Notes: 1247685, according to notes point 1, the fields are appearing for document type which having properties like posting level - Adjusted Reported data, posting - Manual Posting. But where are posting level - two side elimination, posting - Automatic, those fields are not appering
Please suggest any information to overcome from this problemHI Scotsman,
When I see document having Manual Posting option it shows field like Document field, Fixing, Input Opt., Hide, Name. But where as document having Automatic Posting as property it shows only Document field and Name only.
Below is the details from List setting of IUE document type.
Doc No - 85 IUE B/S Items
Properties
Document Field Options
Document Field Name
Cons Group None
Item None
Profit Centre Group None
Company None
Profit Centre For BC None
Segment None
Trading partner None
Investee (Company) None
Alloc. Company None
Movement Type None
Acquisition year None
First acq.per. None
Functional area None
Country None
Unit of Measure None
Transaction Currency None
Product Group
Activity w/OC Logic None
Org. Change No. None
Acy: Elim.P/L Assets
Activity Number None
C/I Activity None
Main Asset No. (Doc) None
Inventory Item
Asset-managing PC None
Asset-managing Co.
Please provide inputs
Regards
Madhu -
My Site-Content Tab- None of the documents are displaying
Hello,
In the My Site content tab documents are not displaying. But when I click on the shared documents I can see all the documents can somebody help me on this.
And in the content tab what documents it should display exactly.Hi,
According to your description, my understanding is that none of documents were displayed in the Shared Documents web part in My Content, but all documents were displayed when clicking the Shared Documents link in Quick Launch.
The Shared Documents web part displays the documents in Shared Documents library.
I recommend to check what is the view used in the Shared Documents web part and check if view has documents in it in the Shared Documents library.
This issue may be due to the view in Shared Documents web part is not the same as the view when viewing the Shared Documents library.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Hello,
In the R3 system (4.6C, BRCONNECT 6.20 patch level 136, TOOLS HP-UX 11.23, oracle 9.2), we have scheduled a job CleanupLogs in DB13. The program works successfully but while displaying details logs following error occures.
BR252E Function fopen() failed for '/oracle/<SID>/sapreorg/cdxzmglv.cln'
at location file_printout-1
BR253E errno 2: No such file or directory
External program terminated with exit code 5
Job creates log file cdxzmglv.cln'
in '/oracle/<SID>/sapcheck/cdxzmglv.cln' but while diplaying it is looking at location as above mentioned in error.
Through Brtools we are able to display job log successfully.
Further , other jobs sheduled in DB13 , detail log display works
correctly. The problem is only with CleanupLogs job.
We would like know why while creating and displaying logs it seeks different location.
Request for your guidence please.
Regards
KailashHello,
This looks like a parameter problem.
Do this:
a) Call Transaction SM51 and log on to the instance on the database server
b) Call Transaction DB03 -> Active parameters to display any parameter that points to sapreorg
c) Change it to point to saptrace, i can't recollect which one to change so use your own judgement
d) Change the same parameter in OS level also in init<SID>.ora
For reference, have a look at the following note:
SAP Note Number: 305740 - Display Optimizer Trace File (ORACLE)
Although the note doesn't point to CleanupLogs, it talks about the error that you see in your log.
Regards,
Siddhesh -
Alert log display"Log actively being archived by another process"
In my Production database(9i) alert log display me "Log actively being archived by another process".
I want to know why this show,reason and how can i solve it.
Wed Dec 05 00:01:35 2007
Thread 1 advanced to log sequence 30174
Current log# 21 seq# 30174 mem# 0: K:\ORACLE\ORADATA\APR2\REDO21A.LOG
Current log# 21 seq# 30174 mem# 1: K:\ORACLE\ORADATA\APR2\REDO21B.LOG
Wed Dec 05 00:01:35 2007
ARC1: Completed archiving log 19 thread 1 sequence 30172
Wed Dec 05 00:01:35 2007
ARC0: Evaluating archive log 20 thread 1 sequence 30173
Wed Dec 05 00:01:35 2007
ARC1: Evaluating archive log 20 thread 1 sequence 30173
ARC1: Unable to archive log 20 thread 1 sequence 30173
Wed Dec 05 00:01:35 2007
ARC0: Beginning to archive log 20 thread 1 sequence 30173
Wed Dec 05 00:01:35 2007
Log actively being archived by another process
Wed Dec 05 00:01:35 2007
Creating archive destination LOG_ARCHIVE_DEST_2: '(DESCRIPTION=(ADDRESS_LIST = (ADDRESS=(PROTOCOL=tcp)(HOST=mtm2stdb)(PORT=1521)))(CONNECT_DATA=(SID=APR2)(ORACLE_HOME=d:\oracle\ora92)(SERVER=DEDICATED)))'
Creating archive destination LOG_ARCHIVE_DEST_1: 'L:\ORACLE\ORADATA\APR2\ARCHIVE\APR2T001S30173.ARC'
ARC0: Completed archiving log 20 thread 1 sequence 30173
Thanks for any helpYou can ignore this error as long as you see that completed archiving of the logsequence
you can see ARCO and ARC1 in the log
you get this error message say ARC1 when ARCO is archivhing the log -
Photoshop document images displaying less saturated in Photoshop only
Hi there,
I seemed to have either clicked on an icon or pressed the wrong shortcut somewhere but now my photoshop documents are displaying less saturated or sometimes psychadelic in Photoshop. Here is an example:
(the first pic is the way it is meant to display, the second is how it is displaying..
When I use the colour picker to select a colour from anywhere inside the picture it does pick up the actual colour and not the desaturated/strange colours. Also when I save the document out as a jpeg or anything and open it into something else other than Photoshop it displays correctly. Whatever it is is making Photoshop display ANY document that I open in that way. Really frustrated please help!!!!
Kind Regards,
MichelleHi there,
Thank you for your replies. Here is the screenshot: How do I replace the display profile?
Maybe you are looking for
-
I bought a DATAPILOT to transfer pictures to my macbook and can't get it to work. Any suggestions please?
-
HELP! How to import .mpg movies from a photocamera?
I'm trying to import mpg movies in Imovie, but it doesn't accept this format. I also tried to convert it to a mp4 file, but they are low res and I need high res (tv use). Please help me out! Thanks!!!
-
How can I add an audio file to a .mov video?
Im trying to add an audio file (format 'aiff'), to a video in the format of .mov I can't find anything that will just let me combine the two files to make one .mov video file. Any suggestions? Cheers!
-
Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?
-
Does anyone has issue to connect to the wi fi at home
I just got my ipad2 and try to coneect to my home wi fi, and got issue to connect to the wi fi net work. I had typed in my password coupe time, but no connection at all. I am sure my password is correct, what else should I check for this issue? Anyon