Document no assignment problem help me

hi GURUS,
i need to assign a document no for two doctument types ..i created a document no range SNRO and assigned to
one document type -TST now i need to assign same no range to second doc type .but it is over lapping .one no is given to first doc type and second no to second doc type.
In MCDOKZNR program there is call function number_check . i gave number ,object ,range in call function . it is generating no value to one doc type ( exp : trd01) but for second doc type (exp: tst02) but i need tst01 to generate....

Hi Pannem,
You need not av to create different document number ranges for diff doc types as u want to use the same document number.
Whatever the number range that u av defined,assign the same number ranges to two different document types.
For E.g:
From Number : 1000000 & To number : 9999999999 (External Number 04), Assign the number range for document types TST and as well DRW in External number range field.
So whenever u try to create DIR, Document number 1000000 can be used for TST & DRW document types.
Hope this clarifies you....
Regards
Bhanu

Similar Messages

Delivery document is assigned to Shipment document.

Delivery document was assigned to the shipment document. and delivery document was deleted from SAP.
Since the preceeding document delivery document was deleted from SAP. Now User want to delete the shipment document from SAP. But system encountered following error message.
When I try to execute the transaction VT02N and enter the shipment number
Following error message is triggered
Deliveries in shipment 22207486 no longer exist
    Message no. VW 097
Diagnosis
    The shipment contains one or several items that refer to a delivery that
    no longer exists.
System Response
    If this shipment was generated by an external planning system, it is
    possible that deliveries in the SAP system were deleted manually.
    The confirmation for changes to this shipment made by the external
    planning system has not yet taken place.
Procedure
    At the moment, you cannot process but only display the shipment.
    Processing is not possible until the external planning system has
    confirmed this shipment and the relevant shipment item has been removed.
Is there any way to delete the shipment from SAP.
Thanks
Subramanyam Mukka

Please read OSS note 195527 (it's a quite old note, I'm note sure it is useful or not; if it does not help I would suggest you should contact SAP instead of deleting redcords directly from data table on your own).
It mentions a correction program ("ZZSHPCOR") which may help.
Edited by: Csaba Szommer on Jul 19, 2010 1:53 PM
Edited by: Csaba Szommer on Jul 19, 2010 1:57 PM

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Color management problems - help please!

Hello, I'm trying hard to understand color management and to make colors consistent throughout my workflow, and I'm failing miserably despite reading and re-reading the help files. I'd REALLY appreciate some help with my specific problems, which I'm going to detail here.
WHAT I DO
I make pictures for use on the Web. I do both this by photoshopping existing photos, and by digitally drawing and painting in photoshop starting from a blank document.
HOW MY SYSTEM IS SET UP
1) I have my monitor set to sRGB, and I've calibrated the colors using the Viewsonic calibration app that came with the monitor. The resulting colors look good, to my eyes at least.
2) I've set up Photoshop to use sRGB as the working RGB colorspace, and to convert RGB images to the working colorspace
3) I've set up Photoshop's Save For Web to embed the color profile, to Convert to sRGB, and to Preview with Use Document Profile
THE PROBLEM I'M HAVING
The preview I see in the Save For Web preview screen exactly matches the source document. However, after saving for web, the color of the jpg or gif is significantly different to that of the original document.
If I change the preview mode to Monitor Color, it does show an accurate representation of the jpg or gif that will be saved, but of course as I've explained that is drastically different to the source document.
WHAT I NEED
1) I need the output jpg or gif to match the source document
2) I need to understand what's going wrong so that I can gain some insight into this process. I'm finding it very confusing
Any help would be greatly appreciated.
Thanks,
Mark

Mark,
What model of viewsonic do you have? And is it a CRT or LCD?
If it's a CRT, there are some software based "eyeball" calibrators which can get you in the ballpark. If you have an older version of Photoshop you can use the Adobe Gamma utility that was included in CS2 and earlier versions.
After that, my previous advice still stands, but the best results are still going to be to bite the bullet for a colorimeter and live with the peace of mind that will give you.
If your Viewsonic is an LCD, you're much more limited, as the eyeball calibrators were never designed for LCD's. You can try them and they may be better than nothing, but no guarantees.

Copying layers from one document to another problem?

Hey there, so I have two documents of the same size (11 inches x 8.5 inches) and I am trying to copy some layers from an original document and move it to the second one. I'm doing this by just dragging the layers from the original to the new document. The problem is, the text or images are extremely smaller on the new document and if I blow them up, look really pixelated. What am I doing wrong? The original document is saved as a Photoshop PDF and I believe was made on CS4. I am currently using Photoshop CC 2014.

Make sure the DPI/Resolution is the same for the new document as it is for the original. Files created with 11x8.5 at 72 dpi will show up smaller on 11x8.5 at 300 dpi documents for example. You can also right click on the layer and choose 'duplicate layer', then when the dialog open, select the name of the new document in the dropdown as the place to put the duplicate layer. Either way, the dpi of both files should match. Viewing the image size on the image menu can tell you the current DPI/Resolution. Hope that helps with your problem some. I'm not sure if the fact that the original is a PDF is causing an issue.

Document type assigned for other goods receipts(MB1C)is WA why?

Hi,
Document type assigned for other goods receipts(MB1C)is WA why?
Thanks

Document type for Goods Receipt is WE but I found in standard(Default) system it is assigned WA?
Can anyone help me on this?
Thanks

I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!

I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!

Try this. It worked for me.
I discovered the same problem. I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format. Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story. Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
SECOND: move that file out of the trash and onto your desktop. Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work. iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app. Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP." ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself). Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT: iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
Hope this helps. Good luck.

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Assign Search help in report program

Dear All,
I facing problem to assign search help in report program.
I crated one elementary search help in which three fields i include
-carrid
-carrier name
-booking
all three fields having import and export parameter in search help.
while executing this search help in se11 it gives proper output.
but while assigning this search help in report program it only fetch one carried.
my report is also having three parameter
-carrid
-carrier name
-booking
i assign search help like
PARAMETER : p_carrid TYPE scarr-carrid
                           MATCHCODE OBJECT z01_carrid,
with all three field but it fetch only carrid ...

Hi Chintan,
For such types of requirements you can use this Function Module:
F4IF_INT_TABLE_VALUE_REQUEST.
Use this functiom modue under AT SELECTION-SCREEN ON HELP-REQUEST FOR P_CARRID.
With this function module, you can fill your remainng parameters : P_carriername and booking also.
Sample Code:
     DATA : TMP_RETURN_TAB LIKE TABLE OF DDSHRETVAL,                                TMP_RETURN      LIKE DDSHRETVAL,
                TMP_FIELD       TYPE DFIES-FIELDNAME.
CASE AKIND.
   WHEN '1'.
     TMP_FIELD = 'AENNR'.
   WHEN '2'.
     TMP_FIELD = 'VBELN'.
   WHEN '3'.
     TMP_FIELD = 'ZZTEHAI'.
ENDCASE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = TMP_FIELD
     WINDOW_TITLE           = ATITEL
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = ATABLES
     RETURN_TAB             = TMP_RETURN_TAB
   EXCEPTIONS
     PARAMETER_ERROR        = 1
     NO_VALUES_FOUND        = 2
     OTHERS                 = 3.
IF SY-SUBRC = 0.
    READ TABLE TMP_RETURN_TAB INDEX 1 INTO TMP_RETUN.
    AVALUE = TMP_RETURN-FIELDVAL.
ENDIF.
Jus analyze this code, you can get ur requirement done.
Regards
Sandeep Reddy

How to flip the FI document type assigned in sales billing type

Hi Expart,
We have a special requirement here,as per client requirement we need to flip the FI document type assigned in sales billing type screen (VOFA). The requirement has came because the billing type is used for one company code XXXX, and we need to use the same billing type with different FI document type for another company code YYYY. Since we can't assigned two FI document types in biling document, i belive this can be done only through user exit, pl help me to get the applicable user exit in SD.
Thanks
Garima.

Hi,
The user exit (T.Code SMOD) u201CEXIT_SAPLV60B_001u201D, with include u2018ZXVVFU01u2019, will be implemented. In user exit code will be written, as if company code found as u2018YYYYu2019 and Sales Doc type found as 'AAA' the FI document determine as u2018Z2u2019 in place of default value coming from one-to-one mapping u2018Z1u2019 (FI Document).
IF VBRK-FKART EQ 'AAA' AND VBRK-BUKRS EQ 'YYYY' AND XACCIT-BLART EQ 'Z1'.
XACCIT-BLART = 'Z2'.
hope this will help.
regards
Vivek.

Gaps in Document Number Assignment & Invoice Numbers Allocated Twice

In Period End Closing Financial Accounting there is Gaps in Document Number Assignment & Invoice Numbers Allocated Twice for day-end closing. I understand the difference between the two, but why is the business process procedure a process decision between the two as opposed to a process flow that includes one after the other?
T-Codes:
S_ALR_87012342 vs. S_ALR_87012341
Thanks in advance for you help!

The report is used mostly by SOX and Internal auditors to check if there are any gaps in the document number assigment. This could be possible if due to various reasons certain numbers have been skipped and document numbers are not in sequence. Also as per some of the local reporting GAAPs there hsould not be any gap in the document numbers assignment. To ensure all this this report is checked.
Thanks and regards
Kedar

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

IPad syncing problem - HELP!

iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!

Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D.

A word document was emailed to me. I can open the document without a problem. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

A word document was emailed to me. I can open the document without a problem on my iPad 2. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

If you want to edit a word document then you will need an app on your iPad that supports word so that you can copy them to it via 'open in' e.g. Apple's Pages app or a third-party app such as Documents To Go or QuickOffice HD

Document no assignment problem help me

Similar Messages

Maybe you are looking for