Document not displaying in FB03 but displaying at table level
HI
I have a particular document number which is not displaying in FB03 or in line item display. Buton searching in table FAGLFLEXA the document is existing for the fiscal year 2009.
Can anyone tell me the reason why something like this might have occured?
Hi
Even if a document has been parked it should still display in fb03, in the table entry the company and fiscal code are correct.
Similar Messages
-
Pushbutton Text does not display in portal but display in development
Hi Experts,
I ceated Pushbutton in selection screen block . Pushbutton text is does't display in portal view but display
in development .
i attached my coding , could you suggest anyother coding to diplay the pushbutton text.
SELECTION-SCREEN BEGIN OF BLOCK auth WITH FRAME TITLE text-003.
PARAMETER p_sig(40) TYPE c." OBLIGATORY.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN PUSHBUTTON /43(20) execu USER-COMMAND printlayout ." VISIBLE LENGTH 15.
SELECTION-SCREEN END OF BLOCK auth.
INITIALIZATION.
MOVE text-004 TO execu.Did you check in your portal instance that TEXT-004 has the value you want?
-
Attached document not opening in FB03.
Hi ,
I am using an error while checking uploaded attchment in the transaction FB03.
When any file(ex. pdf) is uploaded from presentation server, it is uploaded successfully and able to see the content .
But when the same file is downloaded on the application server path and then try to see the content, it gives the errror message .
The file is attached to the document with the FM 'SCHM_HTTP_CREATE_FILES' and then attched to the document with FM
'ARCHIV_CONNECTION_INSERT'. The file is seen in attachent list . But when trying to open the file , getting the below erro.
HTTP error: 404 Not Found Document not found: Document '537B79574C7C0173E10080000A43209B' not
found on server 'contracts_dev'.
Thanks in advance ..Have you checked to see that the SAP user has rights to the folder that you are trying to write to?
Neal -
Help frame is not opening to user, but displayed on the windows status bar.
Hi All,
In my application help frame is displaying on the windows status bar. But when i click on the icon it is not displayed on the desktop.
This is not happening again to reproduce it.
If you have faced this problem anytime, please let me know.
May be a problem with the windows OS.
In general, is there any case that, java Frame behaves like this?
Regards,
NarHave you currently got private browsing enabled : Settings > Safari > Private Browsing 'on' ?
-
My website has stopped displaying in IE but displays okay in Mozilla
I added Google Analytics to the web site and the web site cannot be displayed by IE in preview mode or in the live mode. The web site displays okay in Mozilla. I have removed the analytics code but the problem persists.
Thanks.Could be a coding error. If you post a URL to the live site, you'll get better suggestions.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Why Google Analytics Tracking Code doesn't validate in XHTML pages:
http://alt-web.blogspot.com/2008/02/google-analytics-tracking-code-does-not.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.com/blogspot.com -
Swf File doesn't display in chrome but displays in firefox
Hi there, I made a swf file and embed it in my website.
URL: http://worldwidefilipinoalliance.com
It displays properly in the mozilla firefox but not in my google chrome.
Is this problem related to the browser or the way that I embeded my swf file.
Can you give me a tip on how to solve this.
Thank you and regards!Your embedding code appears to be minimal, as well as the old version, which could be the problem. The more modern embedding code will use either swfobject or other javascript-based coding. If you can get a hold of a newer version of Flash you should let Flash generate an html page and then copy and paste the embedding code from that into your html page.
-
HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!
Don't know if this applies to Lion, but read here:
http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/ -
Invoice payment made but document not displaying
HI gurus ,
I have made an invoice payment but the document is not displaying in FB03. How could I know if the posting went through properly or not?
many thanks for your help
regards
cecileHi,
TIP 1]
in F110 ( payment run ) you can find a icon Payment ( that one that looks like a paper scheet ). This is payment log and here you can also find which documents were posted by payment and also by which open postings positions. This requires by payment run addtional log check box and vendor/customer number.
TIP 2]
In FB03 you can find also by using dynamic selection and selection option Transaction with value "F110" than a list of documents posted in F110 will popup. With another dynamic seletion option it will be more accurately.
TIP 3]
Use FBL1N with specific select option to see cleared items to specific date. By generated list of line items you can find your invoice and clearing document as wrote Nitin abov.
Hope it helps
Jan -
Document not display in FB03 ?
HI
All Experts,
One document posted on 09.07.2009 is not able to display in FB03. However I am not able to know that whether that
document is archived or deleted ? So any one can tell me how would I know that what happened to document ?
How to see the archived documents or deleted files ?
Your help is appreciable experts.
Regards,
Pankaj.Hi Gurus.
I noted by Tx. S_ALR_87012342 that I have the same problem that it could be be given by the creation number range. "Displaying only GAPs"indicates me the wrong documents numbers.
My error happens when I try to delete in 2013 year , documents from 2012 by Tx. FB08. When I delete the document, SAP tells me that a document has been created, but then I do not see the ocument. My range number for deleted documents does not depend on year. I do not understand how I can fix the problem.
Pankaj Bhalerao. Whis was the report given by SAP to solve the problem?
“Note 175047 says: Report RFBNUM00 (as well as new RFBNUM00N Report) has document number gaps for the number ange object RF_BELEG ...
An only gap now exists document number if no other data has been updated except for the document number. If document data is partially available, this is caused by a different error(partial update termination, and so on)."
I do not understand this last part. Could you explain me this?
Thanks! -
Document in BSEG but not in BKPF. Message displays Document not in Database
Good day!
We are using SAP 4.6C.
Our client wants to display a document posted some time ago using FB03.
The message displayed, "Document not in database. Search Document archive?"
I looked for the document in BSEG and found that the document exists there.
However, the document header data are missing in BKPF.
Is there a transaction code that could have archived/removed the data in BKPF while
not changing anything in BSEG?
Could there be a way to retrieve these data?
Thank you!Good Day !
For your information, the pop up message prompting for archived mesages "Document is not in database. Search document archive? " is not present anymore in the release ECC 6.0. This pop existed in your release and this has been phased out as part of continuous product improvement after inputs from various customers.
In the newer releases instead of this pop up we have the message
"Document XXXX XXXXXXXXX XXXX is already archived" being displayed at the lower bottom of the screen. This helps you identify that the document was archived. This is the standard SAP behaviour.
Therefore, your document is archived. To able to retrieve this document again you can use Tcode FBL3N and change the Data source option (there is a button for that) to Archived Data.
The same you achieve in FB03 when you select Document List button and then Data Sources Button, mark the option Archive.
I hope this helps.
Best Regards,
Vanessa. -
does anyone know why my ipod nano sixth generation is displayed in windows but not itunes? I followed all the suggestions but nothing.
I apologize if I write bad but I'm ItalianDoublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Automatic Posting Document not display
Hi Experts,
We assign automatic posting document for IUE,
When executing IUE it shows Document, again we are going to check the document it displays the below message:
ERROR : Document header char. Movement Type has an ambiguous value in template document.
I checked in SDN Message No: 7561022 and also OSS Notes: 1247685, according to notes point 1, the fields are appearing for document type which having properties like posting level - Adjusted Reported data, posting - Manual Posting. But where are posting level - two side elimination, posting - Automatic, those fields are not appering
Please suggest any information to overcome from this problemHI Scotsman,
When I see document having Manual Posting option it shows field like Document field, Fixing, Input Opt., Hide, Name. But where as document having Automatic Posting as property it shows only Document field and Name only.
Below is the details from List setting of IUE document type.
Doc No - 85 IUE B/S Items
Properties
Document Field Options
Document Field Name
Cons Group None
Item None
Profit Centre Group None
Company None
Profit Centre For BC None
Segment None
Trading partner None
Investee (Company) None
Alloc. Company None
Movement Type None
Acquisition year None
First acq.per. None
Functional area None
Country None
Unit of Measure None
Transaction Currency None
Product Group
Activity w/OC Logic None
Org. Change No. None
Acy: Elim.P/L Assets
Activity Number None
C/I Activity None
Main Asset No. (Doc) None
Inventory Item
Asset-managing PC None
Asset-managing Co.
Please provide inputs
Regards
Madhu -
in SFP transaction;
when i press layout buton , it give me an error.
SOFFICEINTEGRATION020
'Direct display for documents not activated'Yes i installed .
One of our product systems , i take this error but another one it works correctly . -
Jspx document not displaying in IE 6
Hello all
I am using JDeveloper 10.1.3.0.4 (SU4) to create JSF pages. To do that I use the standard Create Page wizards that popup when double clicking page icons in the faces-config diagram. Following the general advice I created jspx documents instead of JSP pages, but these pages do not display in Internet Explorer.
The error I get is
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
and then a message like
A string literal was expected, but no opening quote character was found. Error processing resource 'http://lxbakalidis:8988...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" SYSTEM "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" >
The pages created start like this :
<?xml version='1.0' encoding='ISO-8859-7'?>
<jsp:root xmlns="http://www.w3.org/1999/xhtml" xmlns:jsp="http://java.sun.com/JSP/Page"
version="2.0" xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<f:view>
<afh:html>
<jsp:output omit-xml-declaration="false" doctype-root-element="html"
doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"/>
<jsp:directive.page contentType="text/html;charset=ISO-8859-7"/>
<afh:head title="About">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-7"/>
</afh:head>
<afh:body>
<h:form>
Has anybody got any idea what's wrong ? The same pages appear to work just fine in Firefox 1.5 and Opera 9.
Thanks in advance
ThanassisHi again David
Looks like you may have misunderstood me. When I said "a
_skin.swf", I simply meant a .SWF that has the same name as your
project, but containing _skin.swf. Basically, the playback control
swf.
Sounds like you are using that file and still seeing the same
result. Oh well... I figured it was a long shot but was indeed
hopeful!
Yeah, it's always been a puzzler to me as to why it works
okay in FireFox but not IE. Go figure. Maybe it's just the way that
browsers work. I always thought it was because when you linked to
the raw .SWF, it all had to load up anyway before playback
commenced.
Hope you find something that works for you! Rick -
Nearly there but not quite - Please help with display issue
Hi,
I had an issue with my mac starting which I resolved by replacing the graphics card. The mac now starts without issue BUT!
In display preferences there is only one display resolution, no detect display button and if I try to calibrate the sliders have no effect
I have tried resetting PRAM and SMC with no effect and also tried a different monitor
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): CK******XYL
Hardware UUID: *****
ATI Radeon HD 5770: (Previously ATI Radeon HD 2600 XT)
Chipset Model: ATI Radeon HD 5770
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x68b8
Revision ID: 0x0000
ROM Revision: 113-C0160C-155
EFI Driver Version: 01.00.436
Displays:
Display:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display Connector:
Display Connector:
<Edited By Host>Not everyone updates their hardware porfile but it should have been spotted that yours lists 10.5.8 which was a big clue and reason to ask and check what you are runnning.
Apple sells 10.6.3. Unlike the prior two which did come out with 10.X.6 which would work and allow boot from DVD you may need the 10.6.8 on flash memory that comes with Lion except that is $69.
We usually do but get tired now that we've been saying "ATI 5x70 needs 10.6.5 or later" when people upgraded their graphic card like you did.
I wish that wasn't so. I don't know how ATI does it for Windows but they do have to retool their drivers when a new OS comes out but end up with a package that supports more than one OS version.
Maybe you are looking for
-
How can I convert an ordinary Mail mailbox to a smart mailbox?
I have a large number of maiboxes all for the one account in Mail. I would like to get rid of them, preferably by changing them into smart mailboxes with the same criteria. The only way I can think of doing this is by deleting the mailboxes after mov
-
The sound on youtube performances has suddenly stopped working. I get no sound, either thru the iMac's speakers, or with headphones. Anybody have any ideas what happened? Thanks, T/
-
Raid Utility not an option on Lion Recovery Disk
I am trying to delete a single RAID set that includes the startup volume. I booted up with the Lion Recovery disk but only the disk utility is available as an option to erase information and no RAID utility is there. I erased the startup volume and
-
Do I have to download each app every time I use?
I ran CC, and chose Illustrator app - took me hours to download and each time I checked it had downloaded in parts... 1% - 14% etc etc Came back the next day - gone - no files - no app to install or run and have to download again ?? I dont have the
-
Hi everyone, I created FTP type Location and set correct parameters for Host, User, Password and path. During the file import process, when I try to expand path to select objects I alway get the same error: API2836: Directory ... does not exist. I ha