Document not found. Excise posting not done or document is archived.
Hi,
I have created an order, delivery and billing document. Billing doc has been released to accounting. However though the accounting doc has been generated, the excise invoice is not generated and also BED, EDCESS & VAT amount not disable. When I was doing the Excise invoice (T code: j1iin) I got the following error
Modvat utilization done already for XXXXXX of Delivery No: XXXXX
Message no. 8I446
Diagnosis
Modvat utilization done already for mentioned billing document
Procedure
Check the billing document entered
If I click on display button after that I got error like
Document not found. Excise posting not done or document is archived.
Message no. 8I301
Diagnosis
The entered document number could not be found either because it is not
correct or the document has been archived
Procedure
Please check the entered document number
Plz help me what cud be the reason for that.
Regards
LVK
Dear LVK
Go to SE16, input Table J_1IEXCHDR and execute. There input the excise invoice number and execute. Check whether system is showing a document. Alternatively, without giving any data in the above table, just give the excise invoice date and execute. Check whether the said excise invoice is stored in the table.
thanks
G. Lakshmipathi
Similar Messages
-
Payment Method supplement is not found while posting invoice thru' F-43
Dear Gurus,
I have configured Vendor Account group (OBD3) & created a vendor account (XK01).While posting thru' T code F-43,an error "Enter payment method supplement in line item 001" is found.But, payment method supplement field is not found while posting.Please solve my problem.hi ,
In F-43 when you enter the document & posting date, company code, currency , And Vendor number PRESS ENTER it will take you to next screen There you can find the PAYMENT METHOD tab under invoice reference .
hope this will help you . -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?
Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps! -
Type was not found or was not a compile-time constant?
Hi guys,
I'm going nuts. I've got this movieclip that I made into a
button with ActionScript. When clicked, it
should go to a frame in my main timeline labeled "beansbus",
but whenever I try to test the movie out, Flash
gives me this error:
1046: Type was not found or was not a compile-time constant:
bus.
I've looked around on the internet and I've been told that
this error can
crop up if the instance name is the same as a library object.
That WAS the
problem, but I renamed the library object to Cutebus, so that
should have fixed it, I hope. There was another fix that involved
something called TextFields in my movieclip, but I don't have
those...
My code looks like this, which was copied and pasted from an
in-class tutorial that DOES work, with no problems.
Thanks in advance for any light you can shed on this.actually the error:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference. at
beans_fla::MainTimeline/frame1()[beans_fla.MainTimeline::frame1:3]
may not obviously give the line number at first
glance, but it does! 'frame 1:3' refers to frame 1, line 3. which
if your code post was accurate to line numbers, refers to:
quote:
bus.stop();
so i'd suggest looking at your bus clip and
ensuring that you have correctly defined its instance name. Also,
make sure you have this correctly defined in each keyframe that the
clip appears. -
Premiere claims Media Cache directory was not found or is not writable.
Premiere claims Media Cache directory was not found or is not writable. I then change the cache settings to an external drive then it crashes regardless of whether I open an existing file or create a new one. I've re-installed, deleted preferences etc. Often when it doesn't crash, it will say file was created in a newer version of Premiere Pro. Losing hair, please help?
Okay! So, immediately after my last post, I solved the problem.
I deleted the cache files in the default directory "C:\Users\"USERNAME"\AppData\Roaming\Adobe\Common" then this stopped the crashing.
There appears to have been updates via Creative Cloud so this must've caused dramas with the existing project files. So a fresh install + the deleting of the cache files, then the changed settings of Media cache locations seems to help.
Thanks for those who tried to help!
Cheers,
Tom -
Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Network controller& USB controller driver not found and wifi not working
hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1 but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03 and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU
Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver. x86 - Win7
[BROADCOM.NTx86.6.1]
%BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
%BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
%BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1 -
I am getting the followiing error in my main document class:
"1046: Type was not found or was not a compile-time constant:TimerEvent."
It's showing in line 47 and 54 (in red below). Any help would be appreciated. BTW, this is my first time creating a main document class since graduating to class files!:
package
//**************** IMPORT STATMENTS *********************
import flash.display.MovieClip;
import com.greensock.TweenLite;
import flash.utils.Timer;
public class Main extends MovieClip
//***************** Variables ***************************
/*private var appStoreURL:URLRequest = new URLRequest("http://itunes.apple.com/us/artist/quackenworth/id518210161");
private var facebookURL:URLRequest = new URLRequest("http://www.facebook.com/quackenworth");
private var twitterURL:URLRequest = new URLRequest("http://www.twitter.com/quackenworth");*/
private var MainScene:Main = new Main();
private var PopUp_MoreApps:MoreApps_mc = new MoreApps_mc();
private var PopUp_About:About_mc = new About_mc();
//*****SPLASH SCREEN ***
private var mc_timerSplash:Timer;
private var splashScreen:mcSplashScreen;
//*****************CONSTRUCTOR CODE ***********************************************************************************
public function Main()
mc_timerSplash = new Timer(3000,1);
mc_timerSplash.addEventListener(TimerEvent.TIMER, StartTimer);
//When timer is finished stop the timer;
mc_timerSplash.addEventListener(TimerEvent.TIMER_COMPLETE, timerCompleted);
splashScreen = new mcSplashScreen();
addChild(splashScreen);
splashScreen.x = stage.stageWidth / 2;
splashScreen.y = stage.stageHeight / 2;
mc_timerSplash.start();
//*********** FUNCTIONS *********************************
private function timerCompleted(e:TimerEvent):void
mc_timerSplash.stop();
mc_timerSplash = null;
private function StartTimer(e:TimerEvent):void
TweenLite.to(splashScreen, 1, {alpha:0, onComplete: SplashScreen});
private function SplashScreen():void
removeChild(splashScreen);
addMainScene();
private function addMainScene():void
addChild(MainScene);
MainScene.x = 489;
MainScene.y = 350;
//TweenLite.from(MainScene.wbbIntro_mc, .5, {alpha: 0});
TweenLite.from(MainScene, 1, {alpha:0});
TweenLite.to(MainScene.girls_mc, 1, {y:395, delay:.3});
TweenLite.to(MainScene.boys_mc, .5, {y:396, delay: .6});
TweenLite.to(MainScene.Joe_mc, .5, {y:339, delay: 1});
TweenLite.to(MainScene.Paul_mc, .5, {y:322, delay:1.2});
private function removeMainScene():void
removeChild(MainScene);
TweenLite.to(MainScene.girls_mc, .1, {y:690});
TweenLite.to(MainScene.boys_mc, .1, {y:693});
TweenLite.to(MainScene.Joe_mc, .1, {y:636});
TweenLite.to(MainScene.Paul_mc, .1, {y:619});Now that the error is solved, when I test nothing happens. I just get a blank screen.
What is supposed to happen? When the program opens a splash screen should be added for 3 seconds and then fade out. Then some main screen movie clips should be added to the stage. -
Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
//Set up UI
textArea = new TextArea();
textArea.setSize(500,280);
textArea.move(20,54);
addChild(textArea);
textInput = new TextInput();
textInput.setSize(500,24);
textInput.move(20,340);
textInput.addEventListener(ComponentEvent.ENTER,checkKey);
addChild(textInput);
button = new Button();
button.width=50;
button.label="Send";
button.move(20,370);
button.addEventListener(MouseEvent.CLICK, sendMsg);
addChild(button);
chatName = new TextInput;
chatName.setSize (100,24);
chatName.move (80,370);
chatName.text="<Enter Name>";
chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
addChild(chatName);
//Connect
rtmpNow="rtmp:/VideoChat ";
nc=new NetConnection;
nc.connect (rtmpNow);
nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
cam = Camera.getCamera();
mic=Microphone.getMicrophone();
//Camera Settings
cam.setKeyFrameInterval(15);
cam.setMode (240, 180, 15, false);
cam.setMotionLevel(35,3000);
cam.setQuality(40000 / 8,0);
//Microphone Settings
mic.gain = 85;
mic.rate=11;
mic.setSilenceLevel (25,1000);
mic.setUseEchoSuppression (true);
//Video Setup
vid=new Video(cam.width, cam.height);
addChild (vid);
vid.x=10, vid.y=20;
//Attach local video and camera
vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
good=e.info.code == "NetConnection.Connect.Success";
if(good)
//Set up shared object
text_so=SharedObject.getRemote("test", nc.uri, false);
text_so.connect (nc);
text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
for (var chung:uint; change<e.changeList.length; chng++)
switch(e.chageList[chng].code)
case "clear":
break;
case "success":
break;
case "change":
textArea.appendText (text_so.data.msg + "\n");
break;
private function cleanName(e:FocusEvent): void
chatName.text="";
private function sendMsg(e:MouseEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
private function checkKey (e:ComponentEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
msg=e.info.code == "NetConnection.Connect.Success";
if(msg)
nsOut=new NetStream(nc);
nsIn=new NetStream(nc);
//NetStream
nsOut.attachAudio(mic);
nsOut.attachCamera(cam);
nsOut.publish("camstream");
nsIn.play("camstream");Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks.. -
Server Error in '/' Application.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
System.Data.SqlClient.SqlConnection.Open() +122
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +44
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082On what website/link did you received this error message ??
-
The server was not found or was not accessible.
I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
I've copied a running web app to this same machine, and opened it in Visual Studio 2012. But when I attempt to run in debug mode, my first attempt to access the database gives me this error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
<add name="EMSDataModelContainer"
connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework""
providerName="System.Data.EntityClient" />
Thanks in advance.Hello,
Please read the following resources:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al BalushiHi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said
-
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Maybe you are looking for
-
Wont let me download apps in appstore
Some apps I do not have option to download to ipod. Download Button not highlighted for me to click on in appstore. Using ios 6.1.6 on 4th gen ipod. Yes, these apps I am trying to download are compatible with ios6.1.6 as well so please help.
-
How does the baseline 13" mba (late 2010, 1.86 ghz, 2GB RAM/128GB) work with OSX LIon? I know the baseline 11" is fine, but does the larger form factor of the MBA 13" require more RAM to be speedy under Lion? I wouldn't think so, but please advise.
-
Itunes+iphone doesn't work! all files are grey!
i connect my iphone to itunes and all the files are grey! i can't select any of the files and i cant transfer any new files. please help!
-
Why does signal strength vary on my Westell 327W?
My wife uses her laptop about 40 feet away from our router, in our house (conventional wood construction, no wireless devices or wireless phones in use in the house, in the suburbs). Her signal strength varies during the day from low to very good--s
-
HT5622 I want to buy Macbook air 13" (13-inch :128GB) from Malaysia
I want to buy Macbook air 13" (13-inch :128GB) from Malaysia, it's price is mentioned as RM 3,299.00. Is there vat included or excluded? As a bangladeshi, what are the terms and conditions? Shall I need to pay any vat/tax during purchase except the p