Document not getting attached in SC and Bid Invitations

documents and attachments are not getting uploaded. There is an error shown "File path for attachment is invalid".
The docserver service(in SICF) is active. I have maintained a user of type communication(created in EBP) in docserver service.
Inspite of this documents are not being uploaded. Is there any other setting that needs to be done?
Amol

Amol,
Check you don't have blank or special characters in your file path. First try to keep it simple as "C:/mydoc.doc".
Regards.
Vadim

Similar Messages

  • Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

    hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • In EBS document not get auto clear Algorithms 11

    In Electronic bank statment  document not get  clear automatically while batch run.
    I update check no to payment document.  even though it is not get auto clear.
    in OT51 assign Interpretation Algorithms 11 011:(Outgoing check: Check number not identical to document number)
    why it is not get  auto clear with check number.

    011 = Outgoing check: Check number not identical to document number
    012 = Outgoing check: Check number identical to document number
    The "document number" in the descriptions is the payment document number - the FI doc that cleared the invoice.  If you use the payment document number as the check number - and thus that is the number the bank includes in the bank statement - then you would use algorithm 012.  If you create a check in the check register that is a different number than the payment document - and the check number is the number in the bank statement - then you would use algorithm 011.
    Search SAP Help for a document titled "Interpretation Algorithms".  This document includes descriptions of all the standard interpretation algorithms.
    Regards,
    Shannon

  • Controlling Document Not Getting Posted

    Dear All,
    We have a peculiar scenario of Controlling Document not getting posted. Any pointers on wat could be the issue will be highly helpful.
    Scenario:
    We have an interface which posts an accounting document.
    Dr. Expense
    Cr. Balance Sheet.
    The Cost Center is supplied thru the interface and FI document and Profit Center Document is posted without any issues. However, CO document is not generated, not sure wat could be the issue. We have performed the basic checks. Also, for the same expense account, we observe some postings have gone into CO where are some didnt'. The difference between documents posted with corresponding CO and documents without corrsponding CO posting is only the "Transaction Key". When we maintain blank Transaction key.. the system posts CO document, when transaction key is "WRX" for that specific GL the system doesn't post.
    Not sure why Standard SAP behaves like that. Please advice wat items i need to check to resolve
    this.
    regards
    Diwakar

    Hello,
    Make sure in OBYC, for key WRX, you have maintained the GL accounts.
    Regards,
    Ravi

  • SQLite encrypted Database does not get attached Using Adobe Air,Why?

    Hi,
    Any one knows the solution, am trying to attach the encrypted SQLite database adobe air-adobe flex bulder , it does not get attached using sqlconnection.attach throws error, though the given key is correct, but it gets open using sqlconnection.open with the same key, any one knows the solution, how to attach the encrypted data base, since am using two data base one is opened and another must be attached to the existing ,thanks in advance. using adobe air- flex related. i use the following code
                   databaseFile1 = File.applicationStorageDirectory.resolvePath("Sample_1.sqlite");
                   databaseFile2 = File.applicationStorageDirectory.resolvePath("Sample_2.sqlite");
    dbConnection.open(databaseFile1, SQLMode.CREATE, false, 1024, secKey);
    dbConnection.attach("db2",databaseFile2,null,secKey);
    got the following error.
    ERROR #3125 Unable to open the database file.

    And I would say more "this is the issue" !
    It should be possible as it is clearly stated in the doc :
    public function attach(name:String, reference:Object = null, responder:Responder = null, encryptionKey:ByteArray = null):void
    with 
    encryptionKey:ByteArray (default = null) — The encryption key for the database file. If the attach() call creates a database, the database is encrypted and the specified key is used as the encryption key for the database. If the call attaches an existing encrypted database, the value must match the database's encryption key or an error occurs. If the database being attached is not encrypted, or to create an unencrypted database, the value must be null (the default).
    so with a same encryptionkey, I (and this should be the same for FinalTarget) can open the encrypted db but not to attach it... quite strange.

  • Divestitature document not getting reversed at receiver group

    Hi
    We have transferred some cons Unit at the upper level of hierarchy under higher cons group,but facing issue of divestitature docuemnt not getting reversed at receiver group,
    This is a vertical upward transfer and have used OC logic to avoid goodwill/gain calculation
    Can some one help me why divestiture document is not getting reversed at receiver group
    Regards
    Sunit

    Hi
    Thanks for you reply,divestiture accounting was done only after doing all necessary change in both receiver and sender group,
    defined FCEP and used OC logic in receiver group,however there are three error in COI task due to imbalance entry will it have anmy impact on document not getting reversed.
    Regards
    Sunit

  • Middleware-Partner Functions not getting attached after BP replication

    Dear SDN team,
    We have an problem related to CRM middleware . We have enabled Middleware to download BPs from SAP R/3 system to CRM 5.2 system.
    Problem: We are able to download the individual BPs like Sold to party and Bill to party from SAP R/3 system to the CRM system. _But the Partner function relationships are not getting attached to these BPs after the replication from ERP to CRM _. I mean the Bill to party is not getting attached to the respective Sold to Party in the CRM system .
    Strangely the Contacts for individual BPs is getting replicated via BP relationships
    Can someone help me to solve this problem.
    What should we do on the MW settings to replicate the respective BP relationships ??
    Kindly get back urgently . Suitable points will be awarded for the useful solution.
    Regards
    Ritvij

    Ritvij,
    You can try as suggest to setup a filter on CUSTOMER_REL on KVNK.  I would exclude any entries where PARNR is a non null value.  Beyond that you may need to do a middleware exit to block that data on the R/3 side.
    For your second question:
    R/3 Account Group = CRM BP Grouping
    Your settings PIDE should transfer the the account group to CRM.  You will need however to maintain a corresponding grouping with number range on the CRM.
    I believe from a business partner "role" perspective, you need to do a middleware exit if you want to replicate the custom account group into a custom role.
    If you do however have a relationship then you need need to do the mapping configuration for this.
    In the CRM IMG you can use the Menu Path:
    CRM->Basic Functions->Partner Processing->Data Transfer.  This will alow you to map in any custom partner functions from R/3 into CRM and be linkded on the business partner master.
    Take care,
    Stephen

  • I can not get itunes to install and open on my new laptop i am so frustrated i have uninstalled and reinstalled at least a dozen times in the last month

    i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
    i got a error 7 this time but have had diff ones befpre please help

    Will iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
    Click Continue.
    Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
    Will iTunes open normally now?
    If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2
    tt2
    Message was edited by: turingtest2

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • Schedule lines not getting confirmed on staurdays and sundays

    Hi all,
    At sales order level, the schedule lines are not getting confimred on staurdays and sundays. So,in the factory which has been assigned to that plant, we have checked all holidays . Even then it's not confirming on saturdaus and sundays.
    In the factory calendar, it was maintained like this.
    Valid      from Year   1996
                    To Year     2010
    Holiday calendar    ID IN
    Specific rule          none exist
    Work days
    Moday to sunday have been ticked. Only public holidays have not been ticked.
    even then staurday and sundays schedule lines are not getting confirmed. pLEASE ADVISE.

    Hi,
    Go to T.CODE SCAL, select your calender id & click on definition.
    Check the working days.Also check the "Holiday Calendar ID" assigned to the "Factory Calendar ID".
    Check if it helps.
    Regds........
    Sumit

  • I am not getting the upload poin and recipient feilds in the PO.

    Hi Friends,
    When i am converting a  Purchase Order with reference to Purchase Requisition with account assignment cat = network  and uploading point field data and recipient data  and the item type D ,we are not getting uploading point data and recipient data.
    for this i used BADI ME_PROCESS_PO
    and the INTERFACE    IF_EX_ME_PROCESS_REQ
    I REALLY DONT NO HOW TO USE METHODS AND HOW TO WRITE A CODE IN THAT PLEASE HELP ME TO GET THE VALUES OF UPLOADING POINT AND RECIPIENT FIELDS DATA SHOULD POPULATE IN PURCHASE ORDER WITH RESPECT TO THA PURCHASE REQUISITION.
    HELP ME WITH SUITABLE CODE FOR THE METHOD...
    THANKS IN ADVANCE ........
    UPENDAR G

    I would just like to add to Billy's remarks: PL/SQL exception management is not just a language function, it also affects the database itself.
    If you "swallow" exceptions, you have defeated the language and you have probably also corrupted data.
    Why do I say this? Because PL/SQL exceptions cause changes in the data to roll back. If you "swallow" the exception, whatever changes you made before the error happened will not be rolled back. This is a huge threat to transactional integrity.
    Here is a demonstration:SQL> create table t(k number);
    table T created.
    SQL> begin
    insert into t values(1);
    insert into t values('a');
    end;
    Error starting at line 6 in command:
    begin
    insert into t values(1);
    insert into t values('a');
    end;
    Error report:
    ORA-01722: invalid number
    ORA-06512: at line 3
    01722. 00000 -  "invalid number"
    *Cause:   
    *Action:
    SQL> select * from t;
    NO ROWS SELECTEDYou see, the "correct" insert into table t was rolled back automatically. This ensures the "all or nothing" property of transactions called "atomicity".
    Now look what happens if you "swallow" the exception:SQL> begin
    insert into t values(1);
    insert into t values('a');
    EXCEPTION WHEN OTHERS THEN NULL;
    end;
    anonymous block completed
    SQL> select * from t;
    K
    1The first insert is not rolled back, so if the calling program commits you will have changed data without respecting transaction boundaries.

  • I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

    I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Profit Center Document not getting generated when direct FI doc is posted

    Dear Experts,
    Profit Center Document not getting generated when direct FI doc is posted. However CO Document is generated for Line Item 1 mentioned below.
    Accounting Entry
    Line 1 -Debit Expense ( Cost Center) 1000
    Line 2 - Credit Bank                             1000    
    Advance Thanks
    Sanjai

    Hi,
    Pls check profit center configuration.... Some config might have missed.....
    Use the t.code 1KE1 For analysing the profit center configuration.
    Regards,
    RAM
    Edited by: Ram000 on Oct 7, 2011 10:45 AM

  • HT4623 i have iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. please help me

    i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me

    If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
    Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
    http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

  • New to iPhone and iTunes. How do I sync and not get my kids songs and apps on my phone

    Can someone tell me how to sync my iPhone 4 and not get my kids apps and songs on my phone

    Don't select them to sync.  It will only sync what you tell it to.
    Open itunes, plug in iphone, go to each tab and select whatever you like, sync.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

Maybe you are looking for