Document not picking up in S_P6B_12000179

Dear Sir/Madam,
i had try to post debit memo for exchange rate differnece through s_p6b_12000179 but message is coming "no document selection.
Before run the report s_p6b_12000179, i had posted one receitpt entry for customer with exchange difference ARS 3965.67.
Now i want to raise debit note on customer for ars 3965.67 through s_p6b_12000179 but the message is coming "no document selection. i had posted entry as on 25.10.2011 and running the report on 30.10.2011.
Please advice why document is not getting slected in s_p6b_12000179.
Regards,
Rajesh

Hi,
when i try to read the note no.575709, it gives message "the required sap note is either in reworking or is released internally only.
Regards,
Rajesh

Similar Messages

  • Document not picked in F110

    Invoice doc: 5000000001
    Due on: 12/30/2008
    Baseline date: 11/10/2008
    Payment terms: 50 days net due
    Vendor master details:
    Vendor: 241344
    Payment method: E
    Payment proposal Details:
    Payment run on 12/29/2008 through F110 t-code
    Parameters:
    Identification:MTR1
    Payment method: E
    Vendor:1 to 99999999
    Result : above invoice doc not picked
    Second payment executed on same day 12/29/2008
    Parameters:
    MTR2
    Payment method: C
    Vendor: 1 to 99999999
    Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
    Again same executed on 30th but not picked but finally picked on 01/02/2009
    My question is why document is not picked in MTR1 which has correct values.

    Hi
    In F110 , when ever you run Payment Proposal , it picks the invoices which are due for the Payment Run date. It also depends on the Next Run Date , Based on the Discount periods of the Payment terms.
    In both MTR1 & MTR2 , check your Next Run date.
    Regards
    Venkat

  • Document not picked in f110 payment

    Invoice doc: 5000000001
    Due on: 12/30/2008
    Baseline date: 11/10/2008
    Payment terms: 50 days net due
    Vendor master details:
    Vendor: 241344
    Payment method: E
    Payment proposal Details:
    Payment run on 12/29/2008 through F110 t-code
    Parameters:
    Identification:MTR1
    Payment method: E
    Vendor:1 to 99999999
    Result : above invoice doc not picked
    Second payment executed on same day 12/29/2008
    Parameters:
    MTR2
    Payment method: C
    Vendor: 1 to 99999999
    Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
    Again same executed on 30th but not picked but finally picked on 01/02/2009
    My question is why document is not picked in MTR1 which has correct values.

    Hi
    Check the base line date for this IV - I dont think the document is overdue in MRT1 that is the reason it is not picked up (in frist payment run). It is overdue in the payment run (in January you run).
    Check the invoice date for document getting picked up ( i hope it is with in the date), check the base line date for payment for payment proposal (I hope on 30th it is not overdue).
    Thanks

  • Down payment document not picking up the PC , but picking up the segment

    Dear Sir/Madam,
    We are making one down payment against a Purchase order through T code: F-48 in the vendor line item we are putting the PO reference. It picks up the segment on the basis of PO, but is is not picking up the Profit center in the general ledger view. This does not allow to post the down payment entry.
    KIndly advice how the same can be resolved.
    Prashant Zinge

    Hi,
         By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
    Kind regards

  • GL Account Document not picked by Standard Program

    Hi Friends,
    I have an issue which is related to GL Accounts
    Everyday 5000 odd documents will be Picked by standard program and the GL documents are cumulated to one particular document and it will be sent to another system through idoc.
    The issue here is on one particular day one single GL Account document has not been picked by the program and cumulated. Instead that has been picked on next month..
    So i need to know what might be the reason for the delay in picking the document for particular day.
    Help me with solution in this issue
    Thanks in advance
    kishore

    Thansk for the reply.
    I also thought of one reason among the four u specified..But i will stil make it clear to u so that i will get better idea on this issue.
    Like in one system all the documents wil be picked and GL account will be posted and through idoc it is sent to another system where  the balance should be equal
    when i compare two systems one is 4.7 and another is 4.5 version.
    In FS10N for all the month the balance is talied for both the systems like the credit ,debit everything gets tallied for the particular document number. But for one particular month there is a diffence only in the credit amount of two systems..The 4.5 system shows some amt less than the total.
    But that problem also solved but it got delayed by a month..
    Thats the reason this issue arised, Why it took this delay..Could you pls suggest me witht this.
    If any kind of prooof is ther to show this might be the reason for client
    Thanks
    kishore

  • Customer document number not picked while making payment

    Hi  guys
    we have one vendor the same vendor as customer also. while we making payment to vendor customer document document number not picked,, the erro message comes.. " NO APPROPRIATE LINE ITEM IS CONTAINED IN THE DOCUMENT"
    But we already assigned the following:-
    1) In Vendor master data, Customer code has been given
    2) In  Documnet type KZ, we select vendor also.
    But still the customer document not picked while  making payment
    Pl Help me out.
    Regards
    K.Gururajan

    Hi,
    Check the following:
    1. The check box clearing with customer and clearing with vendor has been selected in both the masters in the payment transactions tab.
    2. Ensure the vendor is not locked up in any payment proposal in F110.
    Thanks
    Aravind

  • Document type KR is not picking to Clear GL account with T-code F-03

    Hi all,
    My client wants to clear GL account Cash-in-Transit which is open item managed. He has posted two items. One is with KR document type like Intercompnay adjustment account debit (40) and Cash-in-Transit account credit (50). Second item is with SA document type like Cash-in-Transit accont debit (40) and Intercompany adjustment account credit (50). He did not give vendor number and appropriate posting key (31) while postings. With document type KR, he posted with posting keys 40 and 50. Now while clearing the GL account through T-code F-03, system is picking only SA document type. The system is not picking document type KR. He wants to clear the items with each other. I have checked the document type settings. Check boxes Intercompany postings and trading partner are active in both above document types.
    How can the GL account be cleared ? Are any configuration settings missing ? Kindly advice as soon as possible.
    Thanks in advance.
    Regards,
    K.S.K

    Hi,
    First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
    BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
    You posted a debit of 100 USD @ 40 = Rs. 4000.00
    You posted a Credit of 100 USD @ 42 = Rs. 4200.00
    Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
    Hope it is clear to you now..
    Regards,
    SAPFICO.

  • F110 Automatic Payment Run Is Not Picking Documents.

    Hi,
    I have a foreign based vendor for whom i have assigned a payment method recently (previously there was no payment method assigned) and also checked the foreign business partners allowed checkbox in the payment method for company codes screen.
    However when i create new vendor invoices for the vendor the documents are not selected for payment in the F110 payment run. The error message shown is "No valid payment method". However when i directly assign a payment method to the vendor document manually, the F110 payment run can select this document.
    However the way it shd work is that once the payment method is assiged to the vendor master data then any new documents created for the vendor should be selected for payment in the F110 payment screen.
    may i know why this is not working like this?
    Edited by: Raja Kumar on Jun 24, 2009 9:32 AM

    Hi Raja,
    For the Vendor to whom you are posting invoices, if the vendor balance is in debit, then system cant understand for which document it needs to do payment. It might happened that some credit memos are issued for that vendor. That is the reason in APP, its not picking the documents automatically. If the vendor balance is in credit, then it will pick automatically the house bank. Do one thing, make the balance of vendor as credit (H), then if post any invoice it will automatically pick in APP.
    Hope u understood, Let me know if u still need any clarification.
    Regards
    Srikanth

  • Delivery document not being picked while creating shipment document

    Dear All,
    Issue is regarding creation of shipment document.
    As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
    I have created a sales order, picking is completed n saved, PGI not yet been done.
    Am unable to create a shipment document due to delivery document not being picked.
    i/p's will be of great help.
    with regards,
    Vijayashree

    Dear all,
    The issue is solved.
    As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
    Route determination setting was not correct.
    Regards,
    Vijayashree

  • Profit center is not picking from sales order to the billing document

    Hi
    I am creating billing document but it is not picking profit centre from the sales order.
    Could you please help me in this.
    thanks in advamce.

    Hi,
    Ensure that the profit center is assigned to your Sales order.
    Also maintain the following settings in copy control.
    Goto the T.Code "VTFA".
    Select your valid combination.Details.
    Double click on "Item".Select your Item category.
    Details.
    Maintain "Copy requirements" as "002".
    Data VBRK/VBRP as "002".
    Regards,
    Krishna.

  • Revaluation not picking up all documents

    Hi
    The revaluation program is not picking up all foreign currency GRIR documents.  I've checked and the exchange rates are different and the items are open, but when we run the revaluation program it skips certain documents.  Has anyone ever come accross this issue?
    Thanks

    I think that you posted this on the wrong forum.  This is the asset accounting forum.  Revaluation usually refers to the revaluation of assets.  I think that you are asking about currency revaluations.  You shold post your question in the correct forum.

  • Excise Duty not picking automatically during posting of GR Document

    Hi MM
    I have a problem related excise duty calulation. During the posting of GR document for excisable material, excise duty, cess & Edcess not picking automatically, users put manully all the duty along with base value.
    I done the all excersie relate exsie, like matain condition type, J1ID etc.
    Pls help me, it needful for me.

    pl check in p.o that setoff cond of duties are maintained or not ,in FV11 , this was the same issue i had after mainaining the set off then during MIGO all values were autom. appeared.
    pl reward
    ok
    sap11

  • Payment proposal not picking up all documents

    We have several credit memos for one vendor that are not picked up by the payment proposal run even though their due dates are within the payment run.  These credit memos are manually created through FB60 and not through MIRO.  In the payment proposal, the error log says "due items with currency USD, pmt method W - items total is >0".   The same payment proposal picked up all other invoices (for the same vendor) correctly.   These invoices have the same payment method as the credit memos and the credit memo due dates are prior to the payment date.
    If anybody can point me in the right direction as to what to look for, I'd appreciate it.
    rgds,
    Lanny

    Hi Ruslim,
    Please refer below OSS notes:
    Note 164835 - F110: Clearing credit memos and invoices
    Hope this helps.
    Pls assign points as way to say thanks

  • Vendor account not picked in F110 payment run

    Hi Sap Experts,
    i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y  for currency INR its not picking up in payment run even all the open item s are due,
    could help me to solve the issue
    Laxmi

    Hi,
    Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
    1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
    2. Also see the dates entered in parameter tab of both runs
    Regards,
    radha

  • Acctg document not created for cancellation invoice

    Hi all,
    We have a vehicle sales order created with payment card. The SO contains one item for vehicle and one item for parts. The items were delivered and invoiced separately. Hence, SO has one vehicle sales invoice (VSI) and one parts sales invoice (PSI).
    The standard procedure was to post VSI first before the PSI. Accounting documents have been created when both invoices were posted. However, there was a need to cancel the PSI. When this was done, cancellation invoice was created but there was no accounting document posted for the cancellation.
    I tried simulating the scenario in our test server and cancelled VSI 90000081 first before cancelling PSI 90000082 to test if this can be an alternative solution. Cancellation for VSI was posted successfully but error persists for PSI cancellation.
    Order 67 06/19/06 Completed
    . Delivery 80000081 06/19/06 Being processed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000293 06/19/06 complete
    .. Invoice 90000081 06/19/06 Completed
    ... Accounting document 2000077 06/19/06 partly cleared
    .. Invoice cancellation 90000084 06/19/06 Completed
    ... Accounting document 2000079 06/19/06 partly cleared
    . Delivery 80000082 06/19/06 Completed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000294 06/19/06 complete
    .. Invoice 90000082 06/19/06 Completed
    ... Accounting document 2000078 06/19/06 Not cleared
    .. Invoice cancellation 90000083 06/19/06
    .. Invoice 90000085 06/20/06 Blocked
    Accounting status of 90000083 (where error occurs) in VF03->Header->Details is set to K or <b>Accounting document not created (authorization lacking)</b>.
    Any inputs? Thanks in advance.

    Hello Sheila,
    sorry - my first answer was in mistake - Status K means:
    "The transaction is processed using payment cards. The order, however, does not contain valid authorization.
    This problem occurs in billing documents for follow-up deliveries."
    Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
    and trigger this via VF02 -> Release to accounting.
    Regards Wolfgang

Maybe you are looking for