Document number 5000000013 not within defined interval

Experts ,
When I am trying to create PO(ME21N),
System is showing the error
Document number 5000000011 not within defined interval
Message no. 06223
Diagnosis
The document number you entered does not lie within the interval defined for purchasing documents.
Procedure
Contact your system administrator if changes need to be made to the number range interval.
Help me to solve the issues
Regards

Hi Rahul,
Change your document type and try once again.for creating PO in ME21N you need to select standard PO (NB).
Check and revert back
Thanks
Ram

Similar Messages

Error on Purchase Order - Document number 45* not within defined interval

Hi All,
PLEASE HELP ME or guide me in the right direction.
I am faced with a somewhat unique case in our enviroment. Some background first.
Back in 2000 when we upgraded from Walker to SAP, a number of Purchase orders had to be migrated, one of them is the order i am struggling with. Back then very little validations were built in, resulting in a Local Order being incorrectly created as a International Order but against a local currency.
Now this ordered is still being reflected as open in our system. When attempting to change the order by activating the 'Delivery Complete indicator", we get an error "use only foreign currency" This is due to the fact that validations against Document Type and Currency was created in 2003 and are in full operation now. It is hard coded thus i can not remove this easily.
Now when attempting to get around this by changing the Document Type to a Local Purchase order or trying to delete a line, we get the error below.
"Document number 45* not within defined interval"
Number ranges do come to mind based on the error description, however, Local Orders have a number range of 45, International Orders have a number range of 47. In this case, the order is created as a International Order BUT the number range is 45*, again, due to a lack of validations/incorrect config back in 2000
Do any of you know a possible solution to such a problem.
Regards,
Jody Ponnusami.

The validation of document type and currency is not standard, and if this validation cannot be deactivated, then you will have to resort to making changes in debug mode. Put a breakpoint at the relevant check and force it to accept the current combination.
The second option is to update EKPO table manually using SE16N. Set the delivery completed indicator to X.

Document number not within defined interval

I am trying to assign my own po number with idoc pordcr101
i am using the next po in our system 4500016058.
when i look in we02 after sending the idoc i see
document 4500016058 not within defined interval.
can i assign my own po? do i need to define my interval somewhere?
any help would be greatly appreciated.
thank you

Hi Janice,
You are trying to create a PO with your specified Number, but in R/3 document numbers can exist only in the interval specified, hence check the number range in your R/3 config. and accordingly pad your number with 0's.
Or you will have to change the interval ( Basis Job ).
P.S. Also check if your R/3 allows External Number generation.
Regards.

Error Message: Number is not in external Interval (Testing Schedule)

Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AM

Hi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

ADD-ON Document Number is not Increase

Hi All,
My Company use One Customize ADD-On . The Problem is that ADD-on From Document Number Some Time is not Increase Automatically in ONNM And NNM1 Table .Thats why when add any document the massege show_'Document Allrady exists* '_*. Becouse last DocNumber and new DocNumber is Same.When AutoKey and NextNumber is update use update Query then document number is agin increase.
Pleace tall me any Permanent Soltion for this problem.

Hi,
There are certain problems in the add-on source code. It may not update table by using DI API only. Check with add-on developer to find the solution.
Thanks,
Gordon

Document number is not opening in My Requested Products application.

Dear All,
We are using SAP ECC 6.0 and EHP 6.
we are using standard SSP.In NWBC, the application My requested Products (/SRMERP/WDA_I_SC_FS_ESS ) -> in shopping cart number there is one tab Follow on documents that has a Document number link.
If we click on that document number a new browser window opens in IE it gives an err internet explorer cannot open a page and in Chrome it says(R3 error) " an error occured".
Please advice.
Thanks,
Aashima

The same thing happened to me, yesterday. I gave up and went back to using the original CC today. I created a new site and out of the blue MUSE CC 2014 started opening on its own. Then, I closed the original and it wouldn't close. So, I docked the shortcut to CC 2014 and restarted. After restarting I only clicked the alias to cc 2014 and it opened fine.
I was glad it fixed itself but the old CC was open before it started automatically the new CC 2014. Maybe bumping around this way will get you the same results. Good luck.

PO document number is not displaying.

Dear Friends,
I created purchase requistion in Tr code ME51N ,after that ,aganist this PR No we have created PO. But now we are not able to display this PO No in ME53N. whereas i checked table also EKKO,EKPO is not updated. It is only seen in Tr code ME5A aganist PR no , where we found PO document No but we double click on this NO its showing Error purchse document does not exist.In Tr code ME53N display of PR we can see in STATUS tab--- PO created with date but not PO number.
Plz comment on this,
Waiting for your feedback
Regards
Ashok

Dear Ashok,
check in below link, hope its help:
Re: PO No, GR No is not displaying.
Regards,
w1n

Central Contract Backend document number is not come back

Hi, all~
Pls pay attention this issue.
I saw similiar question but not answered.
We implemented SRM 7.
After Central Contract create, Contract number is transfered to ECC but didn't back.
In tracking tab, there are no backend number.
And I think this is related with XI.
when i check sxmb_moni, 'PurchasingContractSRMReplicationConfirmation_In' message status is not Grand Prix flag.
(Status is 'Transfer to External Applcation', not 'Process Successfully')
What is solution?
Best regards,
SKY.

Hi~ sushil...
Thanks for answer.
I already check /SAPPO/PPO2.
The error message is 'The attributes of the user are inconsistent or not defined. See transaction PPOMA_BBP.'.
But there are no inconsistency or undefined attribute.
We checked it through 'PPOMA_BBP' and 'BBP_CHECK_USERS'.
Could you recommand other way to find out exact point(attribute) about error message?

Finding number of datapoints within time interval

Hello
I have a 2D array, with one column for time/date and one for data measurements. I want to specify a upper and a lower time limit, and then be able to find out how many data points that lies within this time interval. Can anyone help me with this?
Greetings
Kristoffer

Hi,
What I would do is to find the index where the data enters your range and the index where the data leaves your ranger, then just take a subarray out of the original array starting at the first index and going the length to the next index.
The attached vi should be a good template.
Regards,
Rob Afton
Attachments:
Timestamp Math Example.vi ‏8 KB

Sales document number not appearing in Work Item.

Hello gurus,
     I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
     Please suggest a solution.
Regards,
Dnyanesh.

Hello All,
     Thanks for your reply.
I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
Regards,
Dnyanesh.

Originating document number not updated for one invoice line item

Hi,
We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
Best Regards,
Rohit

Dear All,
I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
Is there any other way to clear this document.
Thanks...

Document number not listed in FEBA/FF67

Hi,
i use manual bank statement recon (FF67 & FEBA). this is the 1st time this scenario happened. after we have processed the bank rec, we noted that 1 document number is not listed in the FEBA list under statement number 002.
eg. doc # 30001, doc #30002, doc #30004 --> meaning doc #30003 is not listed BUT system generated the doc #30003.
then when we do detail checking, doc #30003 is duplicate of doc#30002.
anyone encounter this bug before?

hello,
does anyone knows why system skip to list down the document which has been generated? and the doc generated is duplicate posting for 1 of the documents?

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

Document number range object

Hi
Please tell document number range object . T-code :FBN1
PLEASE URGENT
Thanks
Krishna

Hello
A number range must be assigned to each document type in the SAP System. Via the document types, you distinguish the postings according to the different business transactions, for example customer payment, vendor credit memo, and so on. To store documents separately according to document types, you must assign a separate number range to each document type, for example to invoices or to credit memos.
In the following activities:
You define your document number ranges.
You can determine which intervals of document number ranges are to be copied from one company code into another.
You can determine which intervals of document number ranges are to be copied from one fiscal year into another.
Define Document Number Ranges
In this IMG activity you create number ranges for documents. For each number range you specify (among other things):
a number interval from which document numbers are selected
the type of number assignment (internal or external)
You assign one or more document types to each number range. The number range becomes effective via the document type specified in document entry and posting.
You can use one number range for several document types. This means you can differentiate documents by document type but combine them again for filing the original documents, provided you store your original documents under the EDP document number.
Note
The type of number assignment is of special importance. For each document type you should check whether a separate number range must be used and which type of number assignment is most appropriate.
One example of a case where external number assignment would be suitable is when you transfer documents into your SAP system from a non-SAP system. The numbers must be unique. The number range is not displayed with external numbers. You must therefore ensure that you do not skip any numbers when entering numbers manually (for organizational reasons).
You should use internal number assignment if the original documents do not have a unique document number. This is the case, for example, with vendor invoices.
Number ranges for documents are company code-dependent. You must therefore create your number ranges for each company code in which the document type is used, namely with the same number range key.
The number intervals must not overlap. If you use year-dependent number ranges, you can specify the same interval with the same key several times for different to- fiscal years (the limit up to which a number range is still valid). If you want to define number ranges which are independent of the to-fiscal year, enter 9999 in the to- fiscal year field.
Caution
For sample documents, use a number range with key X2, for recurring entry documents with key X1. These keys may not be used for other number ranges.
Recommendation
Store your original documents (paper documents) under the EDP number of the SAP System. You should write the EDP document number on the original document. In this way, the original document for a business transaction can be found at any time.
Activities
1. Determine how document filing is to be carried out in your company codes.
2. Define your number ranges accordingly.
3. Make sure that the number ranges are assigned to the corresponding document types.
Copy to Company Code
In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
Intervals which are copied
To fiscal year(s) (validity limit up until which the number range is valid)
Company code from which you copy (source company code)
Company code(s) into which you copy (target company code(s))
Activities
Make all necessary specifications for copying the number ranges.
Note
The number ranges are only copied into a target company code if no number ranges exist there within the selected "To fiscal year" interval.
Notes on transporting
The documentation for the step "Define document number ranges" describes how to transport document number ranges.
Copy to Fiscal Year
In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code. To do this, you have to define the following information:
Company code(s) within which you copy
Number range number(s) which are copied
Fiscal year from which you copy (source fiscal year)
Fiscal year into which you copy (target fiscal year)
Activities
Make all necessary specifications for copying the fiscal years.
Note
The number ranges are only copied per company code into the target fiscal year if no intervals exist there for this fiscal year.
Reg
*assign points if useful

Document number 5000000013 not within defined interval

Similar Messages

Maybe you are looking for