Document Number not being updated

Hello
I am running into this issue at the time of posting any FI document (invoice/payment/reversal). I get an error saying ex: Doc #1900000000 already exists. which is true, that document already exists. the problem is that it is the first number in the range. I have already posted more than 50 documents and the next number should be 19000000051 or something. I checked the number range and none of them are assigned externally. I also noticed that the current status for all was "0" instead of the current number. So i manually updated the current number and was able to post that document. However, the current document number in FBN1 (Status) did not get updated so I was not able to post the next consecutive document and get the same error (saying document 190000051 already exists). Its like the system is not automatically picking the next consecutive number.
I am not sure what the issue is because i didnt have any problems until yesterday. Could it be due to the period change (Sept 1st today)
Any help would be highly appreciated
thanks
Nubha

Hi Nubha,
Can you please re-check in tables Number ranges for Document type, same Number range you have assigned the Number range Intervals.
Check Table  T003  for Document type to Number range
Check Table  TNRGT for Number range for intervals
Thank you
Anil

Similar Messages

  • Backend document number not getting updated

    Hi ,
    Shopping cart is not getting updated with backend document number in follow on document section
    I am getting graphic display but no backned doc number
    I am on EBP 5.0
    Has anybody come acroos such issue any solution?
    Thanks in advance
    Diwakar

    HI Diwakar,
    Check in table BBP_DOCUMENT_TAB if any follown on document available wrt to SC...
    also you can do one thing...open SC in BBP_PD transaction...select line item & check for  Follow-On Document Object ID in Backend in table BBP_PDBEI...
    also meka esute that this document is created  in R/3..if follow on document is available in R/3 then it's a problem with BBP_GET_STATUS_2..
    Let me know ur findings..
    BR
    Bharat M

  • Document Category not being generated Automatically for AR transaction type

    Hi,
    we have defined some transaction type in AR. But the corresponding document category is not being automatically generated
    Kindly help

    This doesn't look feasible, the only issue I ever encountered with this was the document category not being updated if the transaction type was updated. Maybe the customer has some custom triggers which are preventing the record from being inserted into FND tables. You can easily debug this by opening the form and testing in a TEST environment.

  • Status/Delivery Documents not being updated in C4C from ECC on PGI

    Hi,
    We are integrating SAP C4C with ERP via HCI. We have created a followup ‘Sales Order’ from an opportunity in C4C.
    On creating the followup sales order this gets created in SAP ERP & we get back the sales order/inquiry number in C4C,but we do not get any status.
    Also for the sales order when we try to deliver or do a ‘Post Goods Issue’ in ERP and we deliver goods the document flow in ERP shows’ ‘delivery number’ etc but these statuses are not being updated in C4C.
    We have already configured the 'Communication Arrangements ' in C4C, with this scenario as below,
    Opportunity with followup business Transaction in ERP ------ > Update opportunity from followup business transaction document.
    In HCI we have configured the following template in eclipse :
    ERP to Cod Opportunity Replicate
    So,C4C still has just two entries one for inquiry & one for sales order with just the number and no other followup documents details/status ,say PGI --delivery document number etc.Can you kindly help.
    Thanks
    Indrasish

    Hello Indrasish,
    If I am not wrong you might be using the URL for Outbound Channel that is mentioned in Catalog (standard scenarios for HCI on HCI tenant). Mind that the Outbound URL for Pricing, Query Sales Quote and Query Sales Order Scenario should be picked up from Services for same which we can get from SICF on ECC. These URL structures are also maintained in 1402 standard document for ERP integration using HCI. Yet mentioning them below:
    u
    These URL paths are to be maintained in the Outbound Channel on artifacts related to Request Pricing, Query Sales Quote and Query Sales Order.
    Let me know if this is what you were expecting and if this solves your issue.
    Regards,
    Chandan

  • F-28 T-CODE - Open Document is not being pulled

    F-28 T-CODE - Open Document is not being pulled
    Item is shown as open on customer account (FBL5N). Item has not been cleared.
    When selecting items to apply payment, the following message is shown:
    "No appropriate line item is contained in this document"  Message no. F5228
    Appreciate any help that can be provided.
    Best regards, Maikol M.

    Hi,
    - Check some table fields in the missing documents using Transaction SE16. The following conditions must exist:
    BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
    BSEG-XOPVW = X (Indicator: Open item management)
    BSEG-AUGBL = space (clearing document number)
    BSEG-DISBN = space (discount document number)
    BKPF-BSTAT = space (document status)
    BKPF-XSTOV = space (indicator reversal flag)
    REGUS/REGUP -> see below
    Look at table REGUS using Transaction SE16. Enter the account (KONKO) in the selection screen. If you selected an entry, use the information Run date (LAUFD) and Identification (LAUFI) in Transaction F110 (payment program). Check the status of the payment run. If only the proposal was carried out, the documents proposed for payment are blocked for other clearing transactions. It is only when you delete the proposal run that the items are taken into account again in the clearing transaction.
    Rgds.

  • Reversal documents are not being represented when 0PY_PP_C3 is being loade

    We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
    Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
    There are 5 reversal documents are in 0PY_PP_C2.
    The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2. 
    The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

    Hi,
    The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
    After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
    Put a break point and check how the data is flowing.
    Regards,
    Durgesh.

  • My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    Must be serious because you have stated the problem 4 times now.
    Here are a number of things that you can try and maybe one of them will help.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
    And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

  • Net value not being updated from Pricing Element/Pricing condition

    Hi All,
    User confirm activity of 40 hours in CJ20n of Project System. When we are creating RRB(Resource Related Billing) request for billing of 40 hours using DP91, Net Value is coming Zero where as pricing condition for the item is upodating Basic Price from quantity of 40 hours.
    Please adise, why Net Value field is not being updating.
    Regards
    Rajesh

    hi monty,
    first of all please check the validity and other criteria by which sytem populates the pricing records in to the sales order.
    this can be easily done by refering to past "pricing" posts.
    also
    kindly check on the reference status whether this order is getting referenced and pricing values from a preceeding document like  sales quotation,because if the conditions mentioned by you are not in the preceeding saes document then it will not get populated ,hence you have to update pricing by going on to the conditions tab,
    update me so that other solutions can put to you
    regards
    Mohit Singh

  • Item level changes not being updated.

    Hi,
    I am implementing BADI BBP_DOC_CHANGE_BADI, method BBP_PO_CHANGE.
    The problem that I am facing is that whenever, I change anything at the Item level, after the PO has been created, (say for eg item quantity), it is not being updated to the database. I also noticed one thing. When I click on the order button (after changing the item quantity) the import parameter of the BADI it_item of the is empty. Also I am checking in transaction BBP_PD, whether the update has happened.
    Thanks in advance
    Pete

    Hi Yann,
    Below is the code in the BADI BBP_DOC_CHANGE_BADI.
    method IF_EX_BBP_DOC_CHANGE_BADI~BBP_PO_CHANGE.
    CLASS cl_exithandler DEFINITION LOAD.
    DATA: LV_CUF_BADI TYPE REF TO IF_EX_BBP_CUF_BADI, "ZCL_IM_SRM_TANDC_BADI, ",
      LV_CUF_BADI_ACTIVE.
    DATA: IV_MODE   TYPE xfeld,
            IS_CUF_HEADER  TYPE BBP_PDS_HEADER,
            IS_GETDET_HEADER TYPE BBP_PDS_PO_HEADER_D,
            ES_UPD_HEADER TYPE BBP_PDS_PO_HEADER_D,
            IS_UPD_HEADER TYPE BBP_PDS_PO_HEADER_U,
            LV_CHANGE TYPE C,
            IS_ITEM TYPE BBP_PDS_ITEM ,
            IS_ACC TYPE BBP_PDS_ACC,
            IV_DOC_TYPE TYPE CRMD_ORDERADM_H-OBJECT_TYPE VALUE 'BUS2201',
            LV_INCLUDE_NAME TYPE DD03P-TABNAME VALUE 'INCL_EEW_PD_HEADER_SSF_PO',
            LT_DDIC TYPE DD03TTYP,
            LV_REPID TYPE SY-REPID,
            LV_DYNNR TYPE SY-DYNNR,
            I_HEADER LIKE IS_CUF_HEADER,
            GV_CLAUSE_ID(256) TYPE C,
            LV_FLAG(1),
            LV_IMP(1),
            LS_COUNTER(1),
            LS_COUNT(1),
            LS_NUMB(1),
            LS_GUID(32),
            LS_GUID_INIT(32),
            LS_GUID_BLANK(32) TYPE C VALUE SPACE,
            LS_NUMB_BLANK(1) TYPE C VALUE SPACE,
            LS_CNT(1),
            LV_UCOMM(4),
            EV_OKCODE TYPE SY-UCOMM.
    DATA: WA_PDHSC TYPE BBP_PDHSC,
    WA_PDHSC_SEL TYPE BBP_PDHSC,
    *wa_it_item type BBPT_PD_PO_ITEM_ICU,
    WA_IT_ITEM TYPE BBP_PDS_PO_ITEM_ICU,
    wa_et_item TYPE BBP_PO_ITEM_BADI,
    WA_HCF TYPE BBP_PDS_HCF_PO.
    LS_COUNTER = LS_COUNTER + 1.
    IF SY-UCOMM = 'SAVE'.
    IMPORT LV_TEXT TO LV_IMP FROM MEMORY ID 'TEXT'.
    LV_IMP = LV_IMP + 1.
    EXPORT LV_TEXT FROM LV_IMP TO MEMORY ID 'TEXT'.
    ENDIF.
    IF SY-UCOMM = 'CHEC' OR SY-UCOMM = 'ENT1' OR SY-UCOMM = 'SAVE' OR SY-UCOMM = 'LIST'.
      GET PARAMETER ID 'NUMB' FIELD LS_NUMB.
      IF LS_NUMB IS INITIAL.
        MOVE IS_HEADER-GUID TO LS_GUID_INIT.
        MOVE LS_COUNTER TO LS_COUNT.
        SET PARAMETER ID 'GUID' FIELD LS_GUID_INIT.
        SET PARAMETER ID 'NUMB' FIELD LS_COUNT.
      ENDIF.
    ENDIF.
    MOVE-CORRESPONDING IS_HEADER TO I_HEADER.
    IMPORT LV_TEXT TO LV_IMP FROM MEMORY ID 'TEXT'.
    IF SY-UCOMM = 'SAVE' AND LV_IMP = 2.
    CALL METHOD cl_exithandler=>get_instance
    EXPORTING
    exit_name = 'BBP_CUF_BADI'
    IMPORTING
    act_imp_existing = LV_CUF_BADI_ACTIVE
    CHANGING
    instance = LV_CUF_BADI.
    MOVE SY-UCOMM TO LV_UCOMM.
    LV_REPID = 'SAPLZSRM_CUST_SCREEN'.
    LV_DYNNR = '1001'.
    GET PARAMETER ID 'GUID' FIELD LS_GUID.
    IF LS_GUID NE IS_HEADER-GUID.
      I_HEADER-GUID = LS_GUID.
    ENDIF.
    CALL METHOD LV_CUF_BADI->PUT_DATA
    EXPORTING
              is_header             = I_HEADER
              is_item               = IS_ITEM
              is_acc                = IS_ACC
              iv_doc_type           = 'BUS2201'
              iv_include_name       = lv_include_name
              iv_mode               = IV_MODE
              it_dd03p              = lt_ddic
              iv_caller_dynnr       = '1000'
              iv_caller_repid       = SY-REPID
            IMPORTING
              ev_repid              = LV_REPID
              ev_dynnr              = LV_DYNNR.
    CALL METHOD LV_CUF_BADI->GET_DATA
        IMPORTING
          ev_okcode = EV_OKCODE
        CHANGING
          es_header = I_HEADER
          es_item   = IS_ITEM
          es_acc    = IS_ACC.
    ENDIF.
    WA_PDHSC-GUID = IS_HEADER-GUID.
    WA_PDHSC-ZZ_OPT_TERM_COND = I_HEADER-ZZ_OPT_TERM_COND.
    MOVE-CORRESPONDING IS_HEADER to ES_HEADER.
    MOVE IT_PARTNER TO ET_PARTNER.
    loop at it_item into wa_it_item.
    MOVE-CORRESPONDING wa_it_item to wa_et_item.
    append wa_et_item to et_item.
    endloop.
    MOVE IT_ACC TO ET_ACC.
    MOVE IT_HCF TO ET_HCF.
    MOVE IT_ICF TO ET_ICF.
    MOVE-CORRESPONDING WA_PDHSC TO WA_HCF.
    APPEND WA_HCF TO ET_HCF.
    IF LV_UCOMM = 'SAVE' AND LV_IMP = 2.
      SELECT * INTO WA_PDHSC_SEL FROM BBP_PDHSC WHERE GUID = IS_HEADER-GUID.
      ENDSELECT.
      IF SY-SUBRC = 0.
        UPDATE BBP_PDHSC SET ZZ_OPT_TERM_COND = WA_PDHSC-ZZ_OPT_TERM_COND WHERE GUID = IS_HEADER-GUID.
        SET PARAMETER ID 'GUID' FIELD SPACE.
        SET PARAMETER ID 'NUMB' FIELD SPACE.
        CLEAR LV_IMP.
        EXPORT LV_TEXT FROM LV_IMP TO MEMORY ID 'TEXT'.
      ELSE.
        INSERT INTO BBP_PDHSC VALUES WA_PDHSC.
        SET PARAMETER ID 'GUID' FIELD SPACE.
        SET PARAMETER ID 'NUMB' FIELD SPACE.
        CLEAR LV_IMP.
        EXPORT LV_TEXT FROM LV_IMP TO MEMORY ID 'TEXT'.
      ENDIF.
      COMMIT WORK.
    ENDIF.
    endmethod.
    Let me know if you need any clarifications.
    Thanks,
    Pete

  • Backened documents are not getting updated in Classic Scenario

    Hi,
    We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
    Is there any business functions to be activated.

    Hi Sunil,
    You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
    If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
    Best Regards,
    Anu
    Edited by: Anuradha UG on May 18, 2010 8:09 PM

  • Invoice number and document number not printed in payment advice

    Hello Gurus,
           I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
    other fields from regup table are displayed but above two mentioned fields are not displayed.
          I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
    With regards,
    Vikram

    Hi,
    Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
    Rgds
    Aeda.

  • Customer document number not picked while making payment

    Hi  guys
    we have one vendor the same vendor as customer also. while we making payment to vendor customer document document number not picked,, the erro message comes.. " NO APPROPRIATE LINE ITEM IS CONTAINED IN THE DOCUMENT"
    But we already assigned the following:-
    1) In Vendor master data, Customer code has been given
    2) In  Documnet type KZ, we select vendor also.
    But still the customer document not picked while  making payment
    Pl Help me out.
    Regards
    K.Gururajan

    Hi,
    Check the following:
    1. The check box clearing with customer and clearing with vendor has been selected in both the masters in the payment transactions tab.
    2. Ensure the vendor is not locked up in any payment proposal in F110.
    Thanks
    Aravind

  • IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

    iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

    How do you know the library was modified with iPhoto 9 (11)?  If you've never had iPhoto 9 on your Mac it could'nt have.  It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Can't Delete Private Cloud - tbl_WLC_PhysicalObject not being updated

    I am having issues with our SCVMM instance where I can't delete Private Clouds...even if there empty. 
    When I right click the Private Cloud and click Delete, the "Jobs" panel says it finished successfully, however, the Private Cloud is not deleted. 
    After doing some researching, I believe its because entries in the tbl_WLC_PhysicalObject database table are not being updated correctly, when a VM is moved from one Private Cloud to another. After determining the "CloudID" of the Private
    Cloud I am trying to delete, I still see resources assigned to this Private Cloud in the tbl_WLC_PhysicalObject table, even though from VMM Console, the Private Cloud shows up empty. 
    For some testing purposes, I assigned a VM back to the Private Cloud I am trying to delete, only to move it out again and gather some tracing/logging. When I moved the VM back out of the Private Cloud, I had a SQL Profiler running in the background, capturing
    the SQL statements on the DB server. Looking at the "exec dbo.prc_WLC_UpdatePhysicalOBject" statement, I see the @CloudID variable is assigned the "CloudID" of the Private Cloud the VM is currently assigned to/the Private Cloud I am trying
    to delete and is NOT the CloudID of the Private Cloud the VM is being moved to/assigned to. 
    Instead of having the VMM Console GUI do the Private Cloud assignment/change...I copied the PowerShell commands out...so I can run them manually. Looks like the script gets 4 variables ($VM, $OperatingSystem, $CPUType, and $Cloud), and then runs the "Set-SCVirtualMachine"
    CMDLET. For the $Cloud variable, it does return the proper "CloudID" of the Private Cloud I am trying to move the VM too (I ran it separately and then ran an ECHO $Cloud to look at its value). When I run the "Set-SCVirtualMachine" CMDLET,
    the output has values for "CloudID" and "Cloud" and these are still the values of the source Private Cloud/Private Cloud I am moving the VM out of and ultimately want to delete. 
    Has anyone ran into this? Is something not processing right in the "Set-SCVirtualMachine" CMDLET?

    I been slowing looking into this and this is where I am at:
    I built a development SCVMM 2012 R2  instance that mocks our production environment (minus all the VM's...just the networking configuration and all the private clouds have been mocked). From there, I started at SCVMM 2012 R2 GA and one by one installed
    the 4 rollup patches in ordered and at each new patch level,  I monitored the queries coming in through SQL Profiler, as I moved a VM between private clouds and created new VM's within clouds. As I created new VM's and moved the VM's between clouds. the
    stored procedure "prc_WLC_UpdatePhysicalOBject" all have a value of NULL for the CloudID column....so a CloudID isnt even associated to the physical objects (basically the VHDX files and any mounted ISO's I have on the VM's). 
    I did find out this SCVMM instance was upgraded from SCVMM 2008 (I took over after the 2012 R2 upgrade was completed). 
    I am thinking at this point...nothing is wrong with SCVMM 2012 R2 if you build and recreate it from scratch and a new DB. I am thinking this might be a depreciated field from SCVMM 2008. The only other thing we did, was put in a SAN and moved VM's from stand-alone
    hosts to the new CSV's (A mixture of 2008 R2 and 2012 NON R2 hosts). 
    At this point...since we dont have Self-Service enabled yet....it will be a days work to rebuild a new instance of SCVMM 2012 R2 and migrate the hosts/VM's to it and start from a clean slate. 
    I know the DB structure isnt really published...but does anybody have any other insights into this? 

  • 6th gen ipod nano serial number not being recognised by support

    I have just tried to register my 6th gen ipod nano on Apple's website and I get a message that says the number is not recognised, recheck and try again.  At first used number from nano box, then tried again after connecting nano to computer (same number appears of course) but still not being recognised.  The fact that the serial number is not being recognised is not helpful when you need help from support as they also require this information before they will contact you.  Why is my nano's serial number not being recognised?  More to the point, how do I get apple to recognise it?

    Are you sure aren't mistaking I's for 1's or O's of 0s?
    If you head to Settings - General -> About, does it list the same serial # there?
    B-rock

Maybe you are looking for