Document numbering in SAP B1

Dear All,
I am getting error 'Numeric value deviates from legal range (ODBC -1015) [131-183]' while adding new series,
Series have 10 digit numbers. If number starts with '2' its accepting but if starts with 3 or 4 giving above mentioned error.
Version SAP b1 8.8 PL21
Please help on high priority.
Regards
Aarati Kollur

Dear Aarati Kollur,
The Docnum is set to data type as INT (ie integer). The numeric value range for int is
-2147483648 (Minimum Value) and 2147483648 (Maximum value).
The number you are specifying falls above this range so error message is displayed.
Data type BIGINT has higher range than INT which ranges from -9223372036854775808 to 9223372036854775808
So not start with 3 or 4 its deviates out of range.
Kindly check SAP Note 902123 for more information.
The work around might be by prefix like '3' and '4' or anything that the existing codes have in common. The total length then could be shorten.
Thanks,
Srujal Patel

Similar Messages

Document numbering in SAP B1 2005 B

Hi
I have defined two series for each document type and alloted them to different user like A and B (both A & B are not super user). When i am logging in SAP B1 as A or B and trying to make a document. SYSTEM is showing that "You need to define the Document Numbering Series for the document"

Hi,
Log in using manager.
Go to administration module > Sys.Initialisation > General authorisations
Click the concerned user name and
Give acces in administration - system initialisation -series.
note: give authorisation to the concerned series to that user and check wheather it is working or not.
Regards
Suresh Kannan

Using series for UDO document numbering

Hey All,
Does anyone know what else I need to do to implement series numbering on my UDO document? I have added the following line during the UDO registration:
oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tYES
And I have a docnum field on my custom form but I keep getting an error message stating document numbering must be setup for this form and the text box is empty.
How do I get the autonumber to populate that text box?

You haveee to declare the tables and link them. Mine usualy looks like this
Dim oUserTable As SAPbobsCOM.UserTable
        Dim Rs As SAPbobsCOM.Recordset
        oUserObjectMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserObjectsMD)
        oUserObjectMD.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tNO
        oUserObjectMD.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanLog = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.ChildTables.TableName = "DSH1"
        oUserObjectMD.Code = "DEAL"
        oUserObjectMD.LogTableName = "ADSH"
        oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.Name = "Sheet" '"SM_DEAL_SHEET"
        oUserObjectMD.ObjectType = SAPbobsCOM.BoUDOObjType.boud_Document
        oUserObjectMD.TableName = "ODSH"
        lRetCode = oUserObjectMD.Add()
Then i usualy do all the binding in the screen painter. Do it once off. But when you load the document you must also say what it will browse by
oForm.DataBrowser.BrowseBy = "DealNo"
Mine does not populate the box when in add mode. But if i scroll through the old records that have been added it shows the recorde number and all the relvant detail. Under document numbering in SAP make sure that it has created your series.....you should see it there
Hope this helps.

Pre-book ( Advance booking ) document id's numbers in SAP DMS

Hi All,
Please help me,
How to create a "'pre-book' ( Advance booking ) document id's numbers in SAP DMS".
Actually they want to auto create new document info records using transaction CV01N.
Thanks,
Subbu
Edited by: Subramani Duraiswamy on Apr 29, 2008 10:27 AM
Edited by: Subramani Duraiswamy on Apr 29, 2008 10:29 AM

Kannan
OK. Unfortunately reservations cannot be created at the serial number level. So the unsupported way of doing this is updating the mtl_serial_numbers tables. I hope you would know (by some means) which serial numbers you want to allocate to a specific sales orders. If you know, update group_mark_id column in mtl_serial_numbers table with your order_line_Id, This will avoid any one from picking the serial numbers (they will not come up in the LOV or will not be auto allocated).
But you have to make sure to take it off when you actually want to pick this order line and allocate this serial number. So just before you pick release/ confirm this order line you need to update column back to null so that you can allocate that serial number.
Thanks
Nagamohan

Document Numbering Series and navigation buttons in SBO

Hi there,
A new set of document numbering is created for new financial year.
e.g. SO11-100001 is for financial year 2011 and SO12-100001 is for financial year 2012.
Due to this setup, we have encountered a problem to use SAP navigation button to search between documents such as when I continue to click u201CNEXTu201D button, the documents would be popup in following sequence:
SO11-100001  SO12-100001  SO11-100002  SO12-100002  u2026u2026
Is there a way to just navigte through SO12 series documents only?
If I use series grouping under "Authorizations", this will totally block the previous year's documents. There may still be open docuemnts from last year and therefore, using "Authorizations" is not a wise option.
If there is a workaround, kindly share with me.
Thanks,
Yadana

hi Yadana
in that case u can create a user query displaying the fields u want on the basis on the period indicator i.e. 2011 & 2012
hope this would suffice your concern
Regards,
Manish

Align MM and FI Document Numbers in Logistics Invoice Verification

Hi All,
Need help!
Requirement : Align MM and FI Document Numbers in Logistics Invoice Verification
Followed all the steps as per the SAP documentation : Materials Management > Logistics Invoice Verification > Incoming Invoice > Number Assignment > Maintain Number Assignments for Accounting Documents
As per the SAP documentation the configuration done should be enough to pass on MM Document No to FI document. But its not working as expected.
I have done the following:
1. Assigned MM and FI documents the same number range and both are in sync.
2. MM Documents are configured to be internally generated,
3. FI Documents are configured to be externally generated.
While during MIRO system generates errror and tells "Accouting Doc number are externally configured" (Not remembe the exact error) ? What is the solution for this issue. I need to align the MM and FI Document Numbers in Logistics Invoice Verification.
Gone through articles on internet and all discuss the same steps and configuration.
http://wiki.sdn.sap.com/wiki/display/BPX/HowtoAlignMMandFIDocumentNumbersinLogisticsInvoice+Verification
Kindly provide inputs as to what could be the missing configuration or probable solution.
Thanks!
Dev
Edited by: dev ahuja on Aug 19, 2010 3:03 PM

Hi,
Following step should be missing in your system:-
*Step 4. Update MM number range assignment. The last step is to assign the MM number range to your MM transaction via IMG menu path Materials Management>Logistics Invoice Verification>Incoming Invoice>Number Assignment>Maintain Number Assignments for Logistic Documents>Transaction - Assign Number ranges. Two transactions are available. LIV contains the following two internal transactions that are used for the MM document number determination:
u2022RD: manual invoice entry (MIRO)
u2022RS: cancel, reverse invoice (MR8M), evaluated receipt settlement (MRRL), EDI invoice receipt, invoicing plan (MRIS), and revaluation (MRNB).
You need to update the number range interval for transaction RD.*
Please check.
Regards,
Gaurav

Document numbers missing in BI (Delta)

HI,
we are extracting data from data source 0FI_GL_4 ( Daily dalta)
When i reconcile the data from BW to R/3 , observed that on GL account showing wrong values in BW.
Collected all document numbers associated to that perticular GL Account (GL Account updated in 40 Document numbers and 39 documnet numbers came to BW and one was missing as it is there in R/3)
When i check in FB03 there no reverce document for missing one and the time of posting also looks fine.
I got the same issue couple of times.
I tried to find the root cauuse for this but couldnt.
Could you please elobarate why document numbers are missing in BW from R/3.
Regards,
Siva.
Edited by: Siv Kishore on Oct 8, 2010 12:56 PM
Edited by: Siv Kishore on Apr 7, 2011 2:09 PM

Hi Mahalingam,
There could be various reasons for document number skipping. SAP has given various notes on this.
Note 175047 - Causes for FI document number gaps (RF_BELEG). The note is very comprehensive and has a reference of lot many notes.
Thanks
Aravind

Document numbers missing while posting a batch of GL documents via BDC FB01

Hi all,
While posting a batch of GL documents using a BDC program for FB01, all the documents are posted except for a few document numbers getting skipped while posting. For instance, in posting 100 documents, if 101-200 is the document numbers expected to be generated, we are getting a list of doc. numbers from 101-185 and 187-201 thereby skipping the document number 186. But when we post another set of GL documents, the skipped doc. number 186 is first taken and remaining from doc. number 202. Could any one have comes across this scenario or somebody can help to throw some light for the reason behind this. Thanks.

Hi Mahalingam,
There could be various reasons for document number skipping. SAP has given various notes on this.
Note 175047 - Causes for FI document number gaps (RF_BELEG). The note is very comprehensive and has a reference of lot many notes.
Thanks
Aravind

Unable to change document numbering once documents have been created

Hello,
I have created a couple of test quotations, but now I want to change the primary document numbering for quotations and SAP B1 will not let me. We have not gone live with the software yet.
Thank you.

Thank you - how do you define a new series? We have SAP Business One 2007 A (8.00.178) SP: 00 PL: 42. In the Help document it says;
To open the window, choose Administration System Initialization Document Numbering Define Series . Alternatively, you can display the window by choosing New in the Series window.
But when I go to System Initialization>>Document Numbering - Define Series is not an option.

Document Numbering Issue in user defined form

Dear All,
There is UDO with manageseries = true. Series and DocNum fileds are binded to database (Combobox And Edittext). I can easly get next number and assign to Docnum field while selecting series from Combobox. The problem is when i choose series diferent than default and add document i get warning message "The actual posted document number is :XXXXXXX". No matter which series i choose system always takes default one. I found other threads accourding to this issue but no solution found.
Regards,
Guru

Hello,
How guru. Is your problem solved? As i'm have a similar peroblem -
I have created a user form using screen painter and want to save data to my user defined table -
Document - U_OPCD
Document Rows - U_OPCD1
First i was using the SAPbobsCOM.UserTable object to save data to my usertable. But after registering it as a UDO (as i wanted document numbering series for it) i'm unable to save data using this SAPbobsCOM.UserTable object. As i'm uable to access the default fields (DocNum, DocDate, Series....) added to the table by SAP.
Can u help please?

Sequence of Document Numbers

Hi,
I have recently noticed that the numbering sequence of the SAP document numbers which appear after an invoice is entered have not followed a numerical sequence.
I notice them ascending over time but then the numbers just recently went down nine instead of going up one from 559 to 550?....I expected it to go to 560 ....
If this makes sense to anyone...Can you please shed some light on this for me... and you please tell me what process i can follow to find out what may have caused this?
Thanks for your help.
Noopers

Someone would have manually set the current number to 549, hence system picked up the next number 550.
Execute T code SNRO, enter RF_BELEG in Object field and click on 'Number ranges' button. Enter your company code and from the menu on top choose Goto -> Change documents (or press F8) to see changes to your number ranges.

Duplicate Document Numbering after Upgrade

Hi! Can anyone please help me to find-out a resolution for the Duplicate Document Numbering found after the SAP B1 upgrade from 2007 to 8.8?
This report has been found from the Administration -> Utilities.

The previous company database was a trial database, but the production version of the same is showing the following (missing & doubled) List in "Check Document Numbering -> Document Serial Numbering List"
Missing List - 52 rows (a sample from the top is given below) -
Document     Number     To Number
Checks for Payment     1     3931
     3933     6925
     6932     6932
     6963     6963
     7014     7014
and in right had side in the same as above way, the Doubled list - 16 rows
BUT I have check the "Checks for Payment Documents" the documents there shows their "Check Internal ID" 1 to 691. Then from where the above numbers have been detected by the system?
ANOTHER INTERESTING FACT IS THAT THE above testing I have done on SBO 8.8 PL12, hence I have got the "Upgrade Control Report" as well .... and this showing the following "Non-matching quantities" -
#     Table     Records Before     Records After
1     OINM     20284     17342
I have checked the upgrade log-file ... there were no errors. BUT at the time of "Pre-upgrade check" of this company database the warning "common database version differs from the company database version" always.

Document numbering for each bank

Hai Experts,
We are having multiple bank accounts.
For eg. HDFC Bank
ICICI Bank
For each bank the Incoming Payments should be serially numbered, like wise outgoing payments also should be serially numbered. As we have set in the document numbering as 100001 for Incoming payment as starting number, the voucher number generated serially irrespective of the Bank accounts. Pl. let me know how to set up document number generation for each bank seperately.
Thanks in advance
Regards
Sampath

hi sampath,
There is no automatic determination of numbering series in
SAP B1,This is limitation of SAP B1.
you should define numbering series for each bank in
incoming and outgoing payments.
You can set outgoing payment series(Banks) as default
for certain users and incoming payment series(Banks) as
default for certain users.
Ex:
One user will handle HDFC,ICICI Banks,
other user will handle SBI,Canara Banks.
Jeyakanthan

Fail to handle document numbering

Dear all,
I had a problem with SAP 8.82 User Defined Objects screen. While adding document Fail to handle document numbering:.error but the documents is added because of this post transaction is not working

Sir Here added the screen shot for your reference

Document Numbering Problem

Hi Created one user define table of Document Type...
this table used to store some parameters..(Addon)
i uploaded nearly 200 parameters to that table using SQL bulk upload concept succesfully..
But as per sap the next document numbering will ( in NNM1 table) be 1 only for that table..
later while adding parameters manually through user defined screen(add-on) it shown error "
This entry already exist in table - ODBC error")
so i updated that next no value to 201 in NNM1 table ..
still its showing same error..
is there any way to solve this issue... i must upload using Bulk upload,later the client may add through screen..
( due to some problem in DTW for User defined Table i worked sql bulk upload method)
Regards,
Ganesh k

Hi Jane Jing,
i understood the problem..
my another doubt , as per Note 804685.. i uploaded all document type data successfully,
for document rows i had some problem..
for ex my two table name is @HEAD (document) @ROWS(document Rows)
sample data: @HEAD txt file contains following data:
Docentry DocNUm Field1
1             1             A
2             2             B
3             3             C
@ROWS txt file contains following data:
DocEntry Role
1              Stores
2              Purchase
3              Quality
there is no problem in document table.. but in rows table i got all row details under one DocEntry(that too final one)
Output:
DocEntry   LineId      Role
3                 1          Stores
3                 2          Purchase
3                 3          Quality
please let me know my mistake.....
Regards,
Ganesh k

Document numbering in SAP B1

Similar Messages

Maybe you are looking for