Document numbering ... non superusers cant use documents.

I have all document numbers linked to financial periods. However, for each of the series defined, group reads as '1'.
Now, any non-superuser cannot create transactions , as the system alerts 'document numbering' has to be defined first.
As a quick solution, ive had to define these users as superusers , and they can key transactions.
But how do I resolve this issue ? What is the meaning of the 'GROUP' field in document numbering definition. I noticed, that group reads as '-1' for non-superusers.
Please help.

Hi,
Check Note No. : 1057873. Probably it would help in your issue.
Regards,
Jitin

Similar Messages

Linking a Period Indicator to a Posting Period and Document Numbering

Dear All,
Could you please tell me that, what will be the consequences if I do not link a Period Indicator to a Posting Period and use the Period Indicator in any document numbering?

Hi,
The use of the period indicators depends on the accounting practice of the company.
The consequence you will face when you are not using period indicators:
1.Your document numbering series will be continued from year to year,for ex.if your last document numbering series for AP Invoice is 3489 for FY200809,then the starting series for the FY200910 will be 3490.
2.You should perform period end closure before proceeding to the next financial year,which would not be possible(Atleast one month in the new financial yr) as we may need to use adjustment transaction for accounting/auditing purpose
3.Unless you perform year end closure the new series can not be continued,if you continue there must be accepted/explained in the accounts auditing too .
4.But you don't use period indicator,there will not be any necessity to create new document series for every new financial year.
Also check this document on [Period indicators|https://websmp105.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000513532005E] for better understanding.
Hope this is helpful!

Missing document numbers in marketing documents

Hi All,
Why document numbers are missed in marketing documents?For Example I post from 1 to 10 numbers in GRPO.Missed numbers like from 4 to 7 numbers.
Regards,
S.S

Hi,
The same situation i have seen when multiple users are adding the same type of document.
For example if 5 users are punching the data in sale order at the same time, Possibilities are there to get numbers to skip and miss.
Also need to check, if it happens when two users using same user id and password to raise same type of document.
Regards
Ravindran Srinivasan

When saving to SharePoint 2010, we want Word to use document title for file name

We have a template and custom Document information Panel.
In the panel we select a few values to filter the selection list of document numbers. After selection of document number the title is populated from an external list of document numbers with titles.
On initial save, the suggested file name provided by word is not the title that is already populated. If we cancel, and click save a second time the title is now the suggested file name.
Is there a workaround or fix for this issue either for sharepoint or word? To make it use the title information on the initial save attempt?
Thanks in advance,
Chris.

Hi Chris,
Do you use SharePoint Designer Workflow to get and populate the document’s file name?
If so, the issue is caused by delayed Workflow.
For a workaround, you can create an event receiver with ItemAdding method for getting and populating the document’s file name.
For more information, you can refer to the article:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

My document.numbers can not be opened how can i recover the version from yesterday i was not using time machine and it was not in icloud. is there an app i can buy that might help

my document.numbers can not be opened how can i recover the version from yesterday? i was not using time machine and it was not in icloud. is there an app i can buy that might help

Thanks Andy,
I wish I could have told my sister about this as she could not open my homepage back before my new iWeb site. She now can open my site without the yet in case denial window does appear = I thank you.
I think my iWeb site works as Noone has said otherwise from any platform etc...
Alex L
I do agree that should not have to be a consideration for any users so i agree that it would be great if Apple could allow simplicity to run seemlessly.
I have had this problem since Homepage, and here is
what has worked for me. I send out the link, and
then for PC users I send the link with "<" after the address (without quotation
marks. e.g., <http://site.com>).
I also put a note that if that doesn't work, to just
copy and paste the link into a browser. With that I
have only had 1 person say they still can't open.
Everyone else gets it to work.
It's a lot to do and seems like a hassle, but you get
used to it.
Hope this helps!
Andy Martini
PS - APPLE! When are you going to fix this??! It
seems like such a small thing yet you guys have been
stumped for YEARS on this!

Document Numbering Default using DI

Under document numbering, for each series, you can double click the series to default the series for which user ID. However, when posting marketing documents using DI, it doesn't seem to follow this default setting. Does anyone know how can i make it work using DI? Your suggestions would much be appreciated.
Regards,
Alan

it usualy does take the default settings. Maybe you are doing it wrong?
But if you are correct the only other option i can think of is doing it through code.
Whenyou make your document you can specify the series vInvoice.Series = 5 in the header of the document object.
But then the question is which user is default to that series. You need to check which user is currently on.In nnm1 it will give you all the series and to what they are linked to. For instance object code will specify whether it is an invoice or other. Eg invoice is number 13. I assume you know the number that repreasents the documents. Then nnm2 gives you the defaults you setted by giving the user signature for each series. user signatures of the users and teher names are all in ousr.
Hope this helps.

What's the uses of "group" in "Document Numbering".

What is the uses of "group" in "Document Numbering"?
How can we link various "groups" to different "user"?
How can I set, if I want some user to be restricted to a particular series?
Pl Reply asap.
Khushwant

Hi Khushwant
The solution is In the authorisation form,
Go to the following module: Administration >System Initialization>Authorisations -->General Authorisations.
In the Authorisations form select the simple user on the Left collumn and on the right of the form go to Administration --> System Initialization --> Series
There you can determine the user's authorizations on particular series.
Hope this was more helpful
Regards
George

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint.

After downloading OSX Maverick you then cant use work. excel or powerpoint. What do i use and how can i recall my word documents etc

After downloading OSX Maverick you then cant use work. excel or powerpoint. What do i use and how can i recall my word documents etc

Use Office for Mac 2011. If you have it, open one of the programs (Word, Excel, PowerPoint) and do Help > Check for Updates from the menu.
Otherwise, purchase Office 365 and use that.

Using series for UDO document numbering

Hey All,
Does anyone know what else I need to do to implement series numbering on my UDO document? I have added the following line during the UDO registration:
oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tYES
And I have a docnum field on my custom form but I keep getting an error message stating document numbering must be setup for this form and the text box is empty.
How do I get the autonumber to populate that text box?

You haveee to declare the tables and link them. Mine usualy looks like this
Dim oUserTable As SAPbobsCOM.UserTable
        Dim Rs As SAPbobsCOM.Recordset
        oUserObjectMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserObjectsMD)
        oUserObjectMD.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tNO
        oUserObjectMD.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.CanLog = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.ChildTables.TableName = "DSH1"
        oUserObjectMD.Code = "DEAL"
        oUserObjectMD.LogTableName = "ADSH"
        oUserObjectMD.ManageSeries = SAPbobsCOM.BoYesNoEnum.tYES
        oUserObjectMD.Name = "Sheet" '"SM_DEAL_SHEET"
        oUserObjectMD.ObjectType = SAPbobsCOM.BoUDOObjType.boud_Document
        oUserObjectMD.TableName = "ODSH"
        lRetCode = oUserObjectMD.Add()
Then i usualy do all the binding in the screen painter. Do it once off. But when you load the document you must also say what it will browse by
oForm.DataBrowser.BrowseBy = "DealNo"
Mine does not populate the box when in add mode. But if i scroll through the old records that have been added it shows the recorde number and all the relvant detail. Under document numbering in SAP make sure that it has created your series.....you should see it there
Hope this helps.

Document Numbering Query

Hi Experts,
Why is it that I can update some of the Next Document Numbers (ie AP Invoices and AP Credit Notes) but not others (Sales Quotations and AR invoices).
All of the document types have records added, which renders the help files incorrect
Next No. Help files detail:
Enter the number that SAP Business One will assign to the next document of the corresponding type. This value is updated each time a new document is created. If the value in this column is not equal to the value in the First No. column and documents of this type have already been entered, the numbering of the corresponding document type can no longer be changed.
Using SAP 2005A
Thanks
Greig

Hi Gordon,
We haven't actually updated any of the Next Number references as yet. However, some of the document types will allow the cursor in the Next Number field and some will not.
If the help is correct, none of the document types would allow access (I would think).
I assume one way round this is to define another numbering series for each doc type?
Thanks
Greig

PO ref i need Table Data from GR,IR & Account Document Numbers

Hi Fi/Co Family Please give me valuable suggestion ,
Through PO Number we will get GR Number in TC: ME23, how can I get from table data with reference PO to GR, IR and Accounting Document Numbers.
Regards,
Venkat

hi
if ur problem is to find the document number only, then go to tcode me23n and give ur PO number and click on PO history tab on item details.
hope it works.award if useful.

Document Numbering Series and navigation buttons in SBO

Hi there,
A new set of document numbering is created for new financial year.
e.g. SO11-100001 is for financial year 2011 and SO12-100001 is for financial year 2012.
Due to this setup, we have encountered a problem to use SAP navigation button to search between documents such as when I continue to click u201CNEXTu201D button, the documents would be popup in following sequence:
SO11-100001  SO12-100001  SO11-100002  SO12-100002  u2026u2026
Is there a way to just navigte through SO12 series documents only?
If I use series grouping under "Authorizations", this will totally block the previous year's documents. There may still be open docuemnts from last year and therefore, using "Authorizations" is not a wise option.
If there is a workaround, kindly share with me.
Thanks,
Yadana

hi Yadana
in that case u can create a user query displaying the fields u want on the basis on the period indicator i.e. 2011 & 2012
hope this would suffice your concern
Regards,
Manish

Document numbering ... non superusers cant use documents.

Similar Messages

Maybe you are looking for